Answer: You can use a powerpoint as student for assignments, as an employee for presentations, and personally for taking notes.
Explanation:
Hey there!
Answer:
As a student, you might use PowerPoint to complete assignments and create presentations. When your teacher assigns an assignment that you need to share with the class, PowerPoint would be a good program to use.
As an employee, you can use PowerPoint to keep track of sales or data about your job. This way, you can easily show your boss what you have done over the past times you've been working. You can also advertise about your job depending on what your job is.
To use it personally, you can create photo montages of trips with a photo on each slide to share with friends. You can also keep track of chores or chore salaries.
The program PowerPoint can be used in so many ways for so many things, the rest is up to your imagination!
Hope this helps :)
The given SQL creates a song table and inserts three songs.
Write three UPDATE statements to make the following changes:
Change the title from 'One' to 'With Or Without You'.
Change the artist from 'The Righteous Brothers' to 'Aritha Franklin'.
Change the release years of all songs after 1990 to 2021.
Run your solution and verify the songs in the result table reflect the changes above.
CREATE TABLE song (
song_id INT,
title VARCHAR(60),
artist VARCHAR(60),
release_year INT,
PRIMARY KEY (song_id)
);
INSERT INTO song VALUES
(100, 'Blinding Lights', 'The Weeknd', 2019),
(200, 'One', 'U2', 1991),
(300, 'You\'ve Lost That Lovin\' Feeling', 'The Righteous Brothers', 1964),
(400, 'Johnny B. Goode', 'Chuck Berry', 1958);
-- Write your UPDATE statements here:
SELECT *
FROM song;
Answer:
UPDATE song SET title = 'With Or Without You' WHERE song_ID = 200UPDATE song SET artist = 'Aritha Franklin' WHERE song_ID = 300UPDATE song SET release_year = 2021 WHERE release_year > 1990Explanation:
Given
The above table definition
Required
Statement to update the table
The syntax of an update statement is:
UPDATE table-name SET column-name = 'value' WHERE column-name = 'value'
Using the above syntax, the right statements is as follows:
UPDATE song SET title = 'With Or Without You' WHERE song_ID = 200The above sets the title to 'With Or Without You' where song id is 200
UPDATE song SET artist = 'Aritha Franklin' WHERE song_ID = 300
The above sets the artist to 'Aritha' where song id is 300
UPDATE song SET release_year = 2021 WHERE release_year > 1990The above sets the release year to '2021' for all release year greater than 1990
Which of the following is NOT an example of a metasearch engine?
Answer:
Where is the choices mate?
n
What options are available in the Lookup Wizard? Check all that apply.
label the field
sort the records
filter the records
o adjust the column width
O adjust the header height
reduce the number of columns
Je
set where to get lookup field values
Answer:
Label the field
sort records
adjust the column width
set where to get lookup fields
Explanation:
In this lab, you complete a partially prewritten Python program that uses a list.
The program prompts the user to interactively enter eight batting averages, which the program stores in an array. It should then find the minimum and maximum batting averages stored in the array, as well as the average of the eight batting averages. The data file provided for this lab includes the input statement and some variable declarations. Comments are included in the file to help you write the remainder of the program.
Instructions
Make sure the file BattingAverage.py is selected and open.
Write the Python statements as indicated by the comments.
Execute the program by clicking the "Run Code" button at the bottom of the screen. Enter the following batting averages: .299, .157, .242, .203, .198, .333, .270, .190. The minimum batting average should be .157 and the maximum batting average should be .333. The average should be .2365.
Grading
When you have completed your program, click the "Grade" button to record your score.
Lists
BattingAverage.py
4
43
Unix Terminal>
1 # Declare a named constant for array size here.
2 MAX_AVERAGES = 8
3?
4 # Declare array here.
5 averages = []
6 ?
7 # Write a loop to get batting averages from user and assign to array.
8 for i in range(MAX_AVERAGES):
9 averageString = input("Enter a batting average: ")
10 battingAverage = float(averageString)
11 # Assign value to array.
12 averages.append(battingAverage)
13 ?
14 # Assign the first element in the array to be the minimum and the maximum.
15 minAverage = averages[0]
16 maxAverage = averages[0]
17 # Start out your total with the value of the first element in the array.
18 total = averages[0]
19 # Write a loop here to access array values starting with averages[1]
20 ?
21 # Within the loop test for minimum and maximum batting averages.
22 for i in range(1, MAX_AVERAGES):
23 f averages[i] < minAverage:
24 minAverage = averages[i]
25 if averages[i] > maxAverage:
26 maxAverage = averages[i]
27 total += averages[i]
28 ?
29 # Also accumulate a total of all batting averages.
30 ?
31 ?
32 # Calculate the average of the 8 batting averages.
33 average = total / MAX_AVERAGES
34 ?
35 # Print the batting averages stored in the averages array.
36 for avg in averages:
37 print(avg)
38 ?
39 # Print the maximum batting average, minimum batting average, and average batting average.
40 print('Maximum batting average is ' + str(maxAverage))
41 print('Minimum batting average is ' + str(minAverage))
42 print('Average batting average is ' + str(average))
43 ?
W
Run Code
Ctrl + Enter
TestGrade
Answer:
See Explanation
Explanation:
Required
Complete the given code
First, it should be noted that the original code (in the question) is complete, however it is poorly formatted.
The errors that may arise when the code is run is as a result of the poor format of the code.
I've corrected all errors and I fixed the indentations in the original code.
See attachment for the complete code.
Who first demonstrated the computer mouse?
O Microsoft
O Alan Turing
O Douglas Engelbart
O Apple, Inc.
FAST PLEASEEE THANK YOUUU
Answer:
C. Douglas Engelbart
Explanation:
Answer: C
Explanation:
How I did it. Part 4
Answer:
What are you asking for in this problem?
Explanation:
Write a Java program named Problem 3 that prompts the user to enter two integers, a start value and end value ( you may assume that the start value is less than the end value). As output, the program is to display the odd values from the start value to the end value. For example, if the user enters 2 and 14, the output would be 3, 5, 7, 9, 11, 13 and if the user enters 14 and 3, the output would be 3, 5, 7, 9, 11, 13.
Answer:
hope this helps
Explanation:
import java.util.Scanner;
public class Problem3 {
public static void main(String[] args) {
Scanner in = new Scanner(System.in);
System.out.print("Enter start value: ");
int start = in.nextInt();
System.out.print("Enter end value: ");
int end = in.nextInt();
if (start > end) {
int temp = start;
start = end;
end = temp;
}
for (int i = start; i <= end; i++) {
if (i % 2 == 1) {
System.out.print(i);
if (i == end || i + 1 == end) {
System.out.println();
} else {
System.out.print(", ");
}
}
}
}
}
Complete the Rectangle class. It has a rectangle's length and width as class variables and contains methods to compute its area and perimeter. If either parameter is negative, the method should calculate based on its absolute value. Then, you'll take user inputs to create an instance of Rectangle. For example, if you provide the input -13 7 You should receive the output Perimeter = 40.0 Area = 91.0 Note: It is NOT necessary to use the math module to calculate absolute value, though you may if you want. 298800.1775650.qx3zqy7 LAB ACTIVITY 28.4.1: Final Exam 2021 - Problem 4 of 6 0/10 main.py Load default template... 1 class Rectangle: _init__(self, length, width): # your code here 4 5 def area (self): 6 # your code here 7 8 def perimeter (self): 9 # your code here 10 11 if _name__ == '__main__': 12 1 = float(input) 13 w = float(input) 14 r = Rectangle(1, w) 15 print("Perimeter =', r.perimeter()) 16 print('Area =', r.area(), end='')|
Answer:
The complete program is as follows:
class Rectangle:
def __init__(self, length, width):
self.width = abs(width)
self.length = abs(length)
def area(self):
area = self.length * self.width
return area
def perimeter (self):
perimeter = 2 * (self.length + self.width)
return perimeter
if __name__ == '__main__':
l = float(input(": "))
w = float(input(": "))
r = Rectangle(l, w)
print('Perimeter =', r.perimeter())
print('Area =', r.area(), end='')
Explanation:
This defines the class:
class Rectangle:
This gets the parameters from maiin
def __init__(self, length, width):
This sets the width
self.width = abs(width)
This sets the length
self.length = abs(length)
The area function begins here
def area(self):
Calculate the area
area = self.length * self.width
Return the calculated area back to main
return area
The perimeter function begins here
def perimeter (self):
Calculate the perimeter
perimeter = 2 * (self.length + self.width)
Return the calculated perimeter back to main
return perimeter
The main begins here
if __name__ == '__main__':
This gets input for length
l = float(input(": "))
This gets input for width
w = float(input(": "))
This passes the inputs to the class
r = Rectangle(l, w)
This prints the returned value for perimeter
print('Perimeter =', r.perimeter())
This prints the returned value for area
print('Area =', r.area(), end='')
Create a game that rolls two dies (number from 1 to 6 on the side) sequentially for 10 times (use loop). If at least once out of 10 times the sum of two random numbers is equal to 10, you win, else you loose. You will need to get your own method getRandom(int n) that generates a random number, see below (you can modify it as needed), a loop, and IF statement in the loop that checks if a sum of two random numbers is 10 or not.
Please start your program as follows, similar to what we did in class:
import java.util.Random;
public class UseRandom{
//your method getRandom() is here below, n is a range for a random number from 0 to n
public int getRandom(int n)
{
Random r=new Random();
int rand=r.nextInt(n);
return rand;
}
//code continues here, don't forget your main() method inside the class, and making your own object in main() using "new" keyword.
Answer:
Explanation:
The following code is written in Java and loops through 10 times. Each time generating 2 random dice rolls. If the sum is 10 it breaks the loop and outputs a "You Win" statement. Otherwise, it outputs "You Lose"
import java.util.Random;
class Brainly {
public static void main(String[] args) {
UseRandom useRandom = new UseRandom();
boolean youWin = false;
for (int x = 0; x<10; x++) {
int num1 = useRandom.getRandom(6);
int num2 = useRandom.getRandom(6);
if ((num1 + num2) == 10) {
System.out.println("Number 1: " + num1);
System.out.println("Number 2: " + num2);
System.out.println("You Win");
youWin = true;
break;
}
}
if (youWin == false) {
System.out.println("You Lose");
}
}
}
class UseRandom{
public int getRandom(int n)
{
Random r=new Random();
int rand=r.nextInt(n);
return rand;
}}
How do u and justify a document
Write a function input_poly(ptr1) that reads in two polynomials at a time with coefficient and exponent from a file cp7_in.txt. The file will contain 2n polynomials, where n is an integer that is 10 or less. Space for the polynomial will be allocated in run time and there is no limit to the size of the polynomial, e..g the first two lines of the file is
Answer:
try this
Explanation:
#include<stdio.h>
#include<malloc.h>
typedef struct poly{ double coff;
int pow;
struct poly *link; }SL;
void create(SL **head)
{
*head=NULL;
}
//Insertion
void ins_beg(SL ** head, double c, int pw)
{
SL *ptr;
ptr=(SL *)malloc(sizeof(SL));
ptr->coff=c;
ptr->pow=pw;
ptr->link=*head;
*head=ptr;
}
void trav(SL **head)
{
SL *ptr;
ptr=*head;
printf("\n\t Cofficient Exponent\n");
while(ptr!=NULL)
{ printf("\t\t%3.2f \t%d\n",ptr->coff, ptr->pow);
ptr=ptr->link;
}
}
//addition of polynomial............
void mult(SL *pl1, SL *pl2, SL **res)
{
SL trav1, trav2, ptr, new1,*loc;
int x,y;
trav1=*pl1;
while(trav1!=NULL)
{
trav2=*pl2;
while(trav2!=NULL)
{
x=(trav1->coff)*(trav2->coff);
y=(trav1->pow)+(trav2->pow);
//printf("\t%d\t%d\n",x,y);
if(*res==NULL)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=x;
new1->pow=y;
new1->link=NULL;
*res=new1;
}
else
{
ptr=*res;
while((y<ptr->pow)&&(ptr->link!=NULL))
{
loc=ptr;
ptr=ptr->link;
}
if(y==ptr->pow)
ptr->coff=ptr->coff+x;
else
{
if(ptr->link!=NULL)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=x;
new1->pow=y;
loc->link=new1;
new1->link=ptr;
}
else
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=x;
new1->pow=y;
ptr->link=new1;
new1->link=NULL;
}
}
}
trav2=trav2->link;
}
trav1=trav1->link;
}
}
//...addition..............
void add(SL *pl1, SL *pl2)
{
SL trav1, ptr, *new1,*loc; trav1=*pl1;
while(trav1!=NULL)
{
loc=ptr=*pl2;
while((trav1->pow<ptr->pow)&&(ptr->link!=NULL))
{
loc=ptr; ptr=ptr->link;
}
if(loc==ptr)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=trav1->coff;
new1->pow=trav1->pow;
new1->link=*pl2;
*pl2=new1;
}
else
if(trav1->pow==ptr->pow)
{
ptr->coff=ptr->coff+trav1->coff;
//ptr->pow=ptr->pow+trav1->pow;
}
else
if(ptr->link!=NULL)
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=trav1->coff;
new1->pow=trav1->pow;
new1->link=ptr;
loc->link=new1;
}
else
{
new1=(SL *)malloc(sizeof(SL));
new1->coff=trav1->coff;
new1->pow=trav1->pow;
new1->link=NULL;
ptr->link=new1;
}
trav1=trav1->link;
}
}
int main()
{
SL first, sec, *res;
create(&first);
ins_beg(&first,10.25,0);
ins_beg(&first,4,1);
ins_beg(&first,5,2);
ins_beg(&first,4,4);
printf("\nFirst Polinomial:\n");
trav(&first);
create(&sec);
ins_beg(&sec,11,0);
ins_beg(&sec,6,1);
ins_beg(&sec,4,2);
ins_beg(&sec,3,3);
printf("\nSecond Polinomial:\n");
trav(&sec);
create(&res);
printf("\nMultiplication of two Polinomial:\n");
mult(&first,&sec,&res);
trav(&res);
printf("\nAddition of two Polinomial:\n");
add(&first,&sec);
trav(&sec);
//trav(&first);
return 0;
}
Suppose we wanted to make change for purchases and wanted to use the least number of coins possible. Here is a greedy algorithm: for the change amount due, we always use the largest-face-value coin first. Assume we have only coins of quarters ($.25), twenties ($.20), and pennies ($.01). Assume the change is $.40: a. what would be the coins and their numbers obtained by the greedy algorithm above
Answer:
Explanation:
The following code is a Python function that takes in the amount of change. Then it uses division and the modulo operator to calculate the number of coins that make up the changes, using the greatest coin values first.
import math
def amountOfCoins(change):
print("Change: " + str(change))
quarters = math.floor(change / 0.25)
change = change % 0.25
dimes = math.floor(change / 0.20)
change = change % 0.20
pennies = math.floor(change / 0.01)
print("Quarters: " + str(quarters) + "\nDimes: " + str(dimes) + "\nPennies: " + str(pennies))
(01)²
what is 2 in this number
Answer and Explanation:
It's an exponent (2 is squared I believe)
When you have an exponent, multiply the big number by the exponent
Ex: [tex]10^2[/tex]= 10x2=20
Ex: [tex]10^3\\[/tex]= 10x3=30
ghggggggggggggghbbbbbjhhhhhhhh
Answer:
Something wrong?
Explanation:
what is the Is option that prints to the author of a file?
Answer:
We need to use Option - 'author' along with option- 'l'1
When determining the statement of purpose for a database design, what is the most important question to
Who will use the database?
O Should I use the Report Wizard?
How many copies should I print?
How many tables will be in the database?
Answer: A) Who will use the database?
Answer:
It's A
Explanation:
Write a function, stringify_digit that takes a single digit (integer) and returns the corre-sponding digit as a string. For example, stringify_digit(9) returns "9" and stringify_digit(0)returns "0". You may assume that only the digits 0 to 9 will be passed in as argumentsto your function. You may not use the str() function for this function.
Answer:
The function in Python is as follows:
def stringify_digit(digit):
dig = "%s" % digit
return dig
Explanation:
This defines the function
def stringify_digit(digit):
This converts the input parameter to string
dig = "%s" % digit
This returns the string equivalent of the input parameter
return dig
Java 2D Drawing Application. The application will contain the following elements:
a) an Undo button to undo the last shape drawn.
b) a Clear button to clear all shapes from the drawing.
c) a combo box for selecting the shape to draw, a line, oval, or rectangle.
d) a checkbox which specifies if the shape should be filled or unfilled.
e) a checkbox to specify whether to paint using a gradient.
f) two JButtons that each show a JColorChooser dialog to allow the user to choose the first and second color in the gradient.
g) a text field for entering the Stroke width.
h) a text field for entering the Stroke dash length.
I) a checkbox for specifying whether to draw a dashed or solid line.
j) a JPanel on which the shapes are drawn.
k) a status bar JLabel at the bottom of the frame that displays the current location of the mouse on the draw panel.
If the user selects to draw with a gradient, set the Paint on the shape to be a gradient of the two colors chosen by the user. If the user does not chosen to draw with a gradient, the Paint with a solid color of the 1st Color.
Note: When dragging the mouse to create a new shape, the shape should be drawn as the mouse is dragged.
Answer:
sadness and depression is my answer
Explanation:
The given SQL creates a Movie table and inserts some movies. The SELECT statement selects all movies released before January 1, 2000 Modify the SELECT statement to select the title and release date of PG-13 movies that are released after February 1, 2008. Run your solution and verify the result table shows just the titles and release dates for The Dark Knight and Crazy Rich Asians. 3 6 1 CREATE TABLE Movie ( 2 ID INT AUTO_INCREMENT, Title VARCHAR(100), 4 Rating CHAR(5) CHECK (Rating IN ('G', 'PG', 'PG-13', 'R')), 5 ReleaseDate DATE, PRIMARY KEY (ID) 7); 8 9 INSERT INTO Movie (Title, Rating, ReleaseDate) VALUES 19 ('Casablanca', 'PG', '1943-01-23'), 11 ("Bridget Jones's Diary', 'PG-13', '2001-04-13'), 12 ('The Dark Knight', 'PG-13', '2008-07-18'), 13 ("Hidden Figures', 'PG', '2017-01-06'), 14 ('Toy Story', 'G', '1995-11-22'), 15 ("Rocky', 'PG', '1976-11-21'), 16 ('Crazy Rich Asians', 'PG-13', '2018-08-15'); 17 18 -- Modify the SELECT statement: 19 SELECT * 20 FROM Movie 21 WHERE ReleaseDate < '2000-01-01'; 22
Answer:
The modified SQL code is as follows:
SELECT Title, ReleaseDate FROM movie WHERE Rating = "PG-13" and ReleaseDate > '2008-02-01'
Explanation:
The syntax of an SQL select statement is:
SELECT c1, c2, c...n FROM table WHERE condition-1, AND/OR condition-n
In this query, we are to select only the title and the release date.
So, we have:
SELECT Title, ReleaseDate
The table name is Movie.
So, we have:
SELECT Title, ReleaseDate FROM movie
And the condition for selection is that:
Ratings must be PG-13
And the date must be later than February 1, 2008
This implies that:
Rating = "PG-13"
ReleaseDate > '2008-02-01'
So, the complete query is:
SELECT Title, ReleaseDate FROM movie WHERE Rating = "PG-13" and ReleaseDate > '2008-02-01'
Using a text editor, create a file that contains a list of at least 15 six-digit account numbers. Read in each account number and display whether it is valid. An account number is valid only if the last digit is equal to the remainder when the sum of the first five digits is divided by 10. For example, the number 223355 is valid because the sum of the first five digits is 15, the remainder when 15 is divided by 10 is 5, and the last digit is 5. Write only valid account numbers to an output file, each on its own line. Save the application as ValidateCheckDigits.java.
Answer:
Explanation:
The following code is written in Java. It reads every input and checks to see if it is valid. If it is it writes it to the output file.
import java.io.File;
import java.io.FileNotFoundException;
import java.io.FileWriter;
import java.io.IOException;
import java.util.Scanner;
class Brainly {
public static void main(String[] args) {
try {
File myObj = new File("C:/Users/Gabriel2/AppData/Roaming/JetBrains/IdeaIC2020.2/scratches/input.txt");
Scanner myReader = new Scanner(myObj);
FileWriter myWriter = new FileWriter("C:/Users/Gabriel2/AppData/Roaming/JetBrains/IdeaIC2020.2/scratches/output.txt");
while (myReader.hasNextLine()) {
String data = myReader.nextLine();
int sum = 0;
for (int x = 0; x < 5; x++ ) {
sum += data.charAt(x);
}
int remainder = (sum % 10);
System.out.println(remainder);
System.out.println(data.charAt(5));
if (remainder == Integer.parseInt(String.valueOf(data.charAt(5)))) {
System.out.println("entered");
try {
myWriter.write(data + "\n");
System.out.println("Successfully wrote to the file.");
} catch (IOException e) {
System.out.println("An error occurred.");
e.printStackTrace();
}
}
sum = 0;
}
myWriter.close();
myReader.close();
} catch (FileNotFoundException e) {
System.out.println("An error occurred.");
e.printStackTrace();
} catch (IOException e) {
e.printStackTrace();
}
}
}
Q. Describe the T.V. as an ICT tool.
Answer:
TV or modern televisions are also a type of ICT tool because we get a wide amount of information about mass communication through the various news channels on the TV. TV is now also the most popular as well as a cheap medium of mass communication.
What characteristics should be determined to design a relational database? Check all that apply.
the fields needed
the tables needed
the keys and relationships
the purpose of the database
all of the tables in the database
all of the records in the database
the queries, forms, and reports to generate
Answer: 1,2,3,4,7
Just took it (:
Einstein's famous equation states that the energy in an object at rest equals its mass times the squar of the speed of light. (The speed of light is 300,000,000 m/s.) Complete the skeleton code below so that it: Accepts the mass of an object [remember to convert the input string to a number, in this case, a float). Calculate the energy, e Prints e Code Full Screen code.py' New m-str. input('Input m: 1 ') # d not change this line change m str to a float # remember you need c s Iine 8 print("e:", e) # do not change Save & Run Tests
Answer:
The complete program is as follows:
m_str = input('Input m: ')
mass = float(m_str)
e = mass * 300000000**2
print("e = ",e)
Explanation:
This is an unchanged part of the program
m_str = input('Input m: ')
This converts m_str to float
mass = float(m_str)
This calculates the energy, e
e = mass * 300000000**2
This is an unchanged part of the program
print("e = ",e)
In c please
Counting the character occurrences in a file
For this task you are asked to write a program that will open a file called “story.txt
and count the number of occurrences of each letter from the alphabet in this file.
At the end your program will output the following report:
Number of occurrences for the alphabets:
a was used-times.
b was used - times.
c was used - times .... ...and so, on
Assume the file contains only lower-case letters and for simplicity just a single
paragraph. Your program should keep a counter associated with each letter of the
alphabet (26 counters) [Hint: Use array|
| Your program should also print a histogram of characters count by adding
a new function print Histogram (int counters []). This function receives the
counters from the previous task and instead of printing the number of times each
character was used, prints a histogram of the counters. An example histogram for
three letters is shown below) [Hint: Use the extended asci character 254]:
Answer:
#include <stdio.h>
#include <ctype.h>
void printHistogram(int counters[]) {
int largest = 0;
int row,i;
for (i = 0; i < 26; i++) {
if (counters[i] > largest) {
largest = counters[i];
}
}
for (row = largest; row > 0; row--) {
for (i = 0; i < 26; i++) {
if (counters[i] >= row) {
putchar(254);
}
else {
putchar(32);
}
putchar(32);
}
putchar('\n');
}
for (i = 0; i < 26; i++) {
putchar('a' + i);
putchar(32);
}
}
int main() {
int counters[26] = { 0 };
int i;
char c;
FILE* f;
fopen_s(&f, "story.txt", "r");
while (!feof(f)) {
c = tolower(fgetc(f));
if (c >= 'a' && c <= 'z') {
counters[c-'a']++;
}
}
for (i = 0; i < 26; i++) {
printf("%c was used %d times.\n", 'a'+i, counters[i]);
}
printf("\nHere is a histogram:\n");
printHistogram(counters);
}
What is up with the bots? They are so annoying.
Answer:
very very very annoying
Answer:
yeah
Explanation:
In class we created an opaque object for a type called MY_VECTOR that had an internal structure called My_vector consisting of an integer size, an integer capacity, and an integer pointer data that held the address of the first element of a dynamic array of integers. Write a function called copyVECTOR that receives an opaque object (of type MY_VECTOR) and returns the address of an exact copy of the passed opaque object upon success and NULL otherwise.
Plz hurry it’s timed
Working with do-while loop
Bring the program dowhile.cpp from the Lab 5 folder.
The code is shown below:
______________________________________________________________________________
// This program displays a hot beverage menu and prompts the user to
// make a selection. A switch statement determines which item the user
// has chosen. A do-while loop repeats until the user selects item E
// from the menu.
// PLACE YOUR NAME HERE
#include
#include
using namespace std;
int main()
{
// Fill in the code to define an integer variable called number,
// a floating point variable called cost,
// and a character variable called beverage
bool validBeverage;
cout << fixed << showpoint << setprecision(2);
do
{
cout << endl << endl;
cout << "Hot Beverage Menu" << endl << endl;
cout << "A: Coffee $1.00" << endl;
cout << "B: Tea $ .75" << endl;
cout << "C: Hot Chocolate $1.25" << endl;
cout << "D: Cappuccino $2.50" << endl <
cout << "Enter the beverage A,B,C, or D you desire" << endl;
cout << "Enter E to exit the program" << endl << endl;
// Fill in the code to read in beverage
switch(beverage)
{
case 'a':
case 'A':
case 'b':
case 'B':
case 'c':
case 'C':
case 'd':
case 'D': validBeverage = true;
break;
default: validBeverage = false;
}
if (validBeverage == true)
{
cout << "How many cups would you like?" << endl;
// Fill in the code to read in number
}
// Fill in the code to begin a switch statement
// that is controlled by beverage
{
case 'a':
case 'A': cost = number * 1.0;
cout << "The total cost is $ " << cost << endl;
break;
// Fill in the code to give the case for tea ( $0.75 a cup)
//Fill in the code to give the case for hot chocolate($1.25 a cup)
// Fill in the code to give the case for cappuccino ($2.50 a cup)
case 'e':
case 'E': cout << " Please come again" << endl;
break;
default:cout << // Fill in the code to write a message
// indicating an invalid selection.
cout << " Try again please" << endl;
}
} // Fill in the code to finish the do-while statement with the
// condition that beverage does not equal (E or e).
// Fill in the appropriate return statement
}
Answer:
it throws an error with the includes.
and some undeclared variables.
Explanation:
please fix that.
Color, font, and images are all important aspects of good
I'll mark brainest
Answer:
of good design, so its c ....
Answer: Design
Color, font, and images are all important aspects of good Design.
, Hope this helps :)
Have a great day!!
Why do Apple phones die quickly
Answer:
anything
Explanation:
A lot of things can cause your battery to drain quickly. If you have your screen brightness turned up, for example, or if you're out of range of Wi-Fi or cellular, your battery might drain quicker than normal. It might even die fast if your battery health has deteriorated over time.