How many valence electrons does the following isotope have?

How Many Valence Electrons Does The Following Isotope Have?

Answers

Answer 1

Answer:

I have solution to your question

How Many Valence Electrons Does The Following Isotope Have?
How Many Valence Electrons Does The Following Isotope Have?
Answer 2

Nitrogen is 7th element in periodic table. It contains 7 electrons in which are 2 are inner electrons and 5 are outer electrons. Here N is in -3 oxidation state. Thus, it is having 8 valence electrons.

What is an isotopes?

Isotopes of are atoms with same atomic number and different mass numbers. Almost every elements have isotopes but some of them are unstable in nature.

Atoms forms ions when they lose or gain electrons. Wen they lose electrons, they form positive ions called cations. When they gain electrons they form negative ions or anions.

Nitrogen is 7th element in periodic table. It has 7 electrons out which 2 are inner electrons and 5 are valence electrons. N needs 3 more electrons to attain octet. Thus it gains 3 electrons and forms its 3 - oxidation state.

Thus N in -3 oxidation state have 8 valence electrons.

To find more on nitrogen, refer here:

https://brainly.com/question/16711904

#SPJ2


Related Questions

What Is the answers?

Answers

Answer:

oxygen is responsible for rusting

Oxygen causes the metal can to rust

You have a block of an unknown metal. Which properties would be most helpful in determining what it is? If it could be

Answers

the distributive property would work best

USCTIR ENFIK meaning?

Answers

Answer:

la branche de la mécanique concernée par le mouvement des objets sans référence aux forces qui provoquent le mouvement

Answer:

the features or properties of motion in an object.

which of the following forces could be used in electronic devices?

spring
gravitational
applied
magnetic

Answers

It’s should be magnetic

Answer:

Explanation:

poop


Explain what is meant by the term 'conservation of mass'.
Give your answer in terms of the atoms that take part in a chemical reaction

Answers

Answer:

Below

Explanation:

In a chemical reaction, per the law of conservation of mass, no atoms or subatomic particles will be created or destroyed; for example, H2O2 will decompose into H2 and O2, meaning no matter was created or destroyed.

what is the approximate pH of a solution labeled 0.050 M HCLO ?

Answers

Answer:

It would be around 4.4 in PH

Explanation:

I hope this helped.

what are nanofluids and how they work?​

Answers

Answer:

What is nanofluids?

Nanofluids are engineered suspensions of nanometer-sized solid particles in a base fluid. Suspending small solid particles in the energy transmission fluids can improve their thermal conductivity and provides an effective and innovative way to enhance their heat transfer characteristics significantly.

How nanofluids work?

Nanofluid refers to the dispersion of metal or non-metal nano-powder into traditional heat exchange media such as water, alcohol, and oil to prepare a uniform, stable and high thermal conductivity. The traditional heat exchange medium has a low thermal conductivity and has been unable to meet the growing demand for industrial engineering heat exchange. The thermal conductivity of some metal or non-metal nanoparticles is often hundreds of times higher than that of heat-conducting media. For example, common silicon carbide nanoparticles have a thermal conductivity of 170-270 W/m•K. The researchers found that if the nanoparticles can be uniformly and stably dispersed in the heat transfer medium, the thermal conductivity of the nanoparticles will be greatly improved.

What quantity of energy is required to heat a piece of iron wighing 1.31 g from 25.0 degrees celsius to 46.0 degrees celsius

Answers

the mass energy of telegranium

The quantity of energy required to heat a piece of iron weighing 1.31 g from 25.0 degrees Celsius to 46.0 degrees Celsius is 2.93 calories.

What is energy?

The ability or power to perform tasks, such as the ability to move an object (having a certain mass) by exerting force.

Energy can exist in many forms, including electrical, mechanical, chemical, thermal, and nuclear, and it can also change its form.

The equation q = mcT, where m is the sample mass, c is the specific heat, and T is the temperature change, can be used to determine the amount of heat acquired or lost by a sample (q).

Q = mcΔT

Q = 1.31 g x 449 x 21° C = 12.26 joule

12.26 /1 x 1 cal / 4.189= 2.93 calories

Therefore, the quantity of energy required to heat a piece of iron is 2.93 cal.

To learn more about energy, refer to the link:

https://brainly.com/question/22920370

#SPJ2

I have a hard time telling the difference between convection, conduction, and radiation, anybody got any tips?

Answers

Conduction
In conduction, heat transfer takes place between objects by direct contact.

Convection

In convection, the heat transfer takes within the fluid.

Radiation

In radiation, heat transfer occurs through electromagnetic waves without involving particles.

Van der Waals bonds initiate
a) Between non-metals
b) Within ionic binds
c) Between metals
d) With H-bond
e) All of the above​

Answers

I think e no

I am giving you hint

Which are the two key factors that affect the rate of weathering of rocks?

Select 2.


A Climate


B Rock Type


C Bedrock

Answers

Answer:

A and B.

Explanation:

Climate:

High temperatures and greater rainfall increase the rate of chemical weathering. Lower temperatures can break rocks to by freezing water inside of a rock cracks. When it freezes it expands the water and forces the crack of the rock to expand.

Rock Type:

Certain types of rock are very resistant to weathering. Igneous rocks, especially intrusive igneous rocks such as granite, weather slowly because it is hard for water to penetrate them. Other types of rock, such as limestone, are easily weathered because they dissolve in weak acids.

Which molecule does not obey the Octate rule of valence electrons .

BeCl2

FeCl2

CuCl2

ZnCl2​

Answers

Explanation:

Which molecule does not obey the Octate rule of valence electrons .

BeCl2

FeCl2

CuCl2

ZnCl2

→BeCl2

Explaination:

BeCl2 violates the octet rule because the boron should be in a suitable valence state such that it binds to 3 chlorines. However, in this molecule boron is associated with six electrons.

Answer:

BeCl2

Explanation:

hope Its useful for you

[tex] \\ \\ [/tex]

kk

Heart, 5 stars, and Brainiest if right! Answer needed ASAP PLEASE!What type of forces do not change the motion of an object?
A. Acceleration forces
B. Balanced forces
C. Inertia forces
D. Unbalanced forces

Answers

Answer:

unbalanced force

Explanation:

pls mark me brainliest

Answer:

B. balanced forces

Explanation:

the motion of an object will not change if the forces pushing or pulling the object are balanced

A student was asked to determine the concentration of ammonia, a volatile substance used in the clinical setting as a respiretory stimulant to prevent fainting. First the student pipetted 25.00 mL of the cloudy ammonia solution into a 250.0 mL conical flask. 50.00 mL of 0.100 mol L' HCl(aq) was immediately added to the conical flask which reacted with the ammonia in solution. The excess (unreacted) HCI was then titrated with 0.050 mol L- Na2CO3(aq). 21.50 mL of Na2CO3(aq) was required. Calculate the concentration of the ammonia in the cloudy ammonia solution.​

Answers

This question is describing two chemical equations whereby the concentration of ammonia has to be determined. The first reaction is between 25.00 mL of ammonia and 50.00 mL of 0.100-M HCl whose excess was neutralized with 21.50 mL of 0.050-M Na₂CO₃ and thus, the concentration ammonia in the cloudy solution was determined as 0.114 M.

First of all we need to go over the titration of the excess HCl with Na₂CO₃ by writing the chemical equation it takes place when they react:

[tex]2HCl+Na_2CO_3\rightarrow 2NaCl+CO_2+H_2O[/tex]

Whereas the mole ratio of HCl to Na₂CO₃ is 2:1 and the volume of the HCl leftover is determined as follows:

[tex]V_{HCl}^{leftover}=\frac{2*0.050M*21.50mL}{0.100M} =21.5mL[/tex]

Next, we infer that the consumed volume of HCl by the ammonia solution was:

[tex]V_{HCl}^{consumed}=50.00mL-21.50mL=28.5 mL[/tex]

Then, we write the chemical equation that takes place between ammonia and HCl:

[tex]HCl+NH_3\rightarrow NH_4Cl[/tex]

Whereas the mole ratio is now 1:1, which means that the concentration of ammonia was:

[tex]M_{NH_3}=\frac{28.5mL*0.100M}{25.00mL}\\\\ M_{NH_3}=0.114M[/tex]

Learn more:

(Titration) https://brainly.com/question/15687419(Titration) https://brainly.com/question/25328286

A block has 73 kg is being pushed and accelerated at rate of 10 m/s. what force is being applied to the block?

A-730 N
B-7.3 N
C-7300 N
D-730 Kg

Answers

Answer:

730 N

Explanation:

force =mass×acceleration

force= 73kg × 10 m/s

f=730N

You have 15 grams of of MgSO4, how
many moles of MgSO4 do you have?
A 0.125 Moles of MgSO4
B 0.75 Moles of MgSO4
C 7.5 Moles of MgSO4
D 15.88 Moles of MgSO4

Answers

Answer:

C 7.5 Moles of MgSO4

Explanation:

How many electrons does chlorine need to gain in order to be like Argon ?


- 2 electrons

- 3 electrons

- 1 electron

Answers

Chlorine is in group 7 and thus requires 1 more valence electron in order to form a full valence shell as Argon (group 8 or also known as group 0). Therefore, the answer is 1 electron

If there is .03L of NaOH in a flask, how can a .12M solution of H2SO4 be used to determine the concentration of NaOH in the reaction?

Answers

The concentration of NaOH in the reaction can be determined using the Titration method.

The concentration of NaOH in the reaction can be determined by titration.

A burette if filled with the known concentration of H₂SO₄ and then titrated against the known volume of NaOH in a conical flask. An indicator is used in order to determine the end-point of the titration process. At the end-point of the titration, the volume of acid used is recorded.

Next, we will write the balanced chemical equation of the reaction.

The balanced chemical equation for the reaction is

2NaOH + H₂SO₄ → Na₂SO₄ + 2H₂O

This means 2 moles of NaOH is required to neutralize 1 mole of H₂SO₄

Now, we can determine the concentration of NaOH by using the titration formula.

[tex]\frac{C_{A}V_{A} }{C_{B}V_{B}} = \frac{n_{A}}{n_{B}}[/tex]

Where [tex]C_{A}[/tex] is the concentration of acid

[tex]V_{A}[/tex] is the volume of acid

[tex]C_{B}[/tex] is the concentration of base

[tex]V_{B}[/tex] is the volume of base

[tex]n_{A}[/tex] is the mole ratio of acid

[tex]n_{B}[/tex] is the mole ratio of base

Then, we put the respective parameters, including the volume of acid determined from the titration process, into the formula to determine the concentration of the NaOH.

Hence, the concentration of NaOH in the reaction can be determined using the Titration method.

Learn more on titration here: https://brainly.com/question/25290615

Draw the Lewis Structure for C2F4. b. Total RED's c. Nonbonding RED's d. Electron-Pair Geometry e. Molecular Shape f. Is it Polar, Nonpolar or Ionic

Answers

The molecule C2F4 has a trigonal planar molecular and electron pair geometry.

The shape of a molecule is dependent on the number of electron pairs that surround the central atom in the molecule. In the molecule C2F4, there are two central carbon atoms.

Each of the central carbon atoms have a trigonal planar molecular and electron pair geometry. C2F4 is a symmetrical molecule so it is nonpolar and has a zero dipole moment.

Learn more: https://brainly.com/question/7558603

13. Which has the largest atomic radius?
A. fluorine B. chlorine C. bromine
D. a bromine anion with a charge of 1-

Answers

Answer:

bromine

Explanation:

how are homogeneous mixtures different from heterogeneous mixtures

Answers

Answer:

In Homogenous mixtures, the whole mixture is in the same phase whereas in Heterogeneous mixture, substances can be of two phases and layers may separate. ... Homogeneous mixture could be exemplified as a sugar solution or salt solution whereas Mixture of salt and sand could be used as an example of Heterogeneous mixture.

Which of the following describes a heterotroph?

Heterotrophs get their energy directly from the sun.
Heterotrophs conduct photosynthesis.
Heterotrophs can create their own food.
Heterotrophs cannot create their own food.

Answers

heterotrophs cannot create their own food and rely on others for food

heterotrophs cannot create their own food.

heterotrophs are like animals and humans so humans can’t make their own food.

Please help due tomorrow
Giving Brainlesst

Answers

Answer:

Down arrow:

-a car comes to a stop when a traffic light turns red

Up arrow:

-race car accelerates when a race begins

Circle:

-car driving 45 mile per hour down straight road

Explanation:

and i think the car going around a bend would be an up arrow

A 4.0 L balloon has a pressure of 406 kPa. When the pressure increases to 2,030 kPa, what is the volume? *
0.4 L
0.8 L
0.2 L
1 L

Answers

The new volume when pressure increases to 2,030 kPa is 0.8L

BOYLE'S LAW:

The new volume of a gas can be calculated using Boyle's law equation:

P1V1 = P2V2

Where;

P1 = initial pressure (kPa)P2 = final pressure (kPa)V1 = initial volume (L)V2 = final volume (L)

According to this question, a 4.0 L balloon has a pressure of 406 kPa. When the pressure increases to 2,030 kPa, the volume is calculated as:

406 × 4 = 2030 × V2

1624 = 2030V2

V2 = 1624 ÷ 2030

V2 = 0.8L

Therefore, the new volume when pressure increases to 2,030 kPa is 0.8L.

Learn more about Boyle's law calculations at: https://brainly.com/question/1437490?referrer=searchResults

How many species are known to be living on Earth?

Answers

Answer:

8.7 million species

Explanation:

Scientists have estimated that there are around 8.7 million species of plants and animals in existence.

In each of the combinations, predict the more electronegative element based on its position on the
periodic table. Then look up the actual electronegativities. Circle the reaction pair that should
actually caust a reaction.
More
Combination Combination electronegative
A
B
element based on
position on table
Ba + Fe2-
Ba?- + Fe
Actual
Actual
electronegativity electronegativity
of element of element
a)
Ba =
Fe=
b)
)
Sn + Hg
Sn- + Hg
Sn =
Hg =
c)
)
Na + Mg2+
Na + Mg
Na=
Mg =
=
Zn + CO2-
Zn?- + Co
Zn =
Co=

Answers

c)

)

Na + Mg2+

Na + Mg

Na=

Mg =

=

Zn + CO2-

Zn?- + Co

Zn =

Co=

PLEASE HELP WILL GIVE BRAINLIEST

Answers

Answer:

Explanation:

Gravity pulls the balls down the ramp, and the force of gravity is bigger on larger-mass objects. The extra force on the bigger ball means that it has more energy when it gets to the bottom of the ramp and consequently travels more before stopping.

According to Hebrews 11, what did Abraham believe God would do if Isaac was slain as a sacrifice?

Answers

Answer:

He thought he was going to bring Isaac back from the dead. They ended up sacrificing the donkey instead.

Select True or False: The entropy of a perfectly ordered crystalline substance at 0 K is 0 J/mol. Bloom's Level: Understand

Answers

True, the entropy of a perfectly ordered crystalline substance at 0 K is 0 J/mol.

The third law of thermodynamics states that, the entropy of a system approaches a constant value as the temperature of the system approaches absolute zero.

The entropy of any perfectly ordered, crystalline substance at absolute zero temperature is zero.  That is, the entropy of a pure, perfect crystalline substance at 0 K is 0 J/K.

Thus, we can conclude that the given statement is true.  The entropy of a perfectly ordered crystalline substance at 0 K is 0 J/mol.

Learn more about third law of thermodynamics here: https://brainly.com/question/1156831

As part of an investigation into the strength of electrostatic forces between molecules of water, a student will measure the melting point temperature. Which part of the experimental design does this describe?(1 point)
determining the procedure
determining what data to collect
deciding on the appropriate equipment
deciding on the number of trials to perform


Which experimental design would be best to use in investigating the boiling points of water and ethanol?

Heat samples of water and ethanol in two separate beakers using a Bunsen burner. Measure the temperatures at which the samples boil using a thermometer. Record these temperatures as the boiling points.
Mix samples of water and ethanol in a beaker, then heat using a Bunsen burner. Measure the temperature at which the sample boils using a thermometer. Record this temperature as the boiling point.
Heat samples of water and ethanol in two separate beakers using a Bunsen burner. Measure the temperatures at which the samples boil using a thermometer. Conduct several trials and record the average temperatures as the boiling points.
Mix samples of water and ethanol in a beaker, then heat using a Bunsen burner. Measure the temperature at which the sample boils using a thermometer. Conduct several trials and record the average temperature as the boiling point.

Which change happens when a substance melts?(1 point)
The vibration of the molecules produces enough heat to weaken the forces of attraction between the molecules of the substance.
Heat energy overcomes the forces of attraction between the molecules of the substance, so the molecules can move more freely.
Heat energy forces the molecules of the substance farther apart until the rigid structure of the solid breaks.
The molecules of the substance move farther apart, which pulls on the intermolecular bonds between them.
Which change occurs to cause water to boil into steam?(1 point)

The addition of kinetic energy causes the motion of water molecules to overcome gravitational forces.
The addition of kinetic energy causes the motion of water molecules to overcome gravitational forces.
The removal of kinetic energy causes the motion of water molecules to overcome electrostatic forces.
The removal of thermal energy causes the motion of water molecules to overcome gravitational forces.

Answers

Answer:

1) B. determining what data to collect

2) C. Heat samples of water and ethanol in two separate beakers using a Bunsen burner. Measure the temperatures at which the samples boil using a thermometer. Conduct several trials and record the average temperatures as the boiling points.

3) B. Heat energy overcomes the forces of attraction between the molecules of the substance, so the molecules can move more freely.

4). The addition of thermal energy causes the motion of water molecules to overcome electrostatic forces.

Explanation:

I think these are the answers, i'll confirm when I finish the test.

In an experiment it is known what quantity has to measured, thus the measurement of melting point has been determining what data to collect. Thus, Option B is correct.

To investigate the boiling point of water and ethanol, the samples has to boiled at constant parameters and the data has been collected with several trials. Thus, option C is correct.

Melting has been described as the change of the solid to the liquid state. With melting, there has been heat energy higher than the force of attraction allowing the molecules to move freely. Thus, option B is correct.

The boiling has been the change in the water at liquid state to the gaseous state. With boiling there is thermal energy capable of increasing the motion of water molecules overcoming electrostatic force.

For more information about melting, refer to the link:

https://brainly.com/question/12499685

Other Questions
Which sentence, if added to this passage, would provide the most imagery?Vanessa and Alicia put down their paddles and let their canoe floatdown the river. Vanessa shielded her eyes so she could look up at thetrees.O A. She wondered about all the people who had floated down the riverbefore.O B. Alicia and Vanessa had been friends since the first grade.O C. Far above her were chirping birds and buzzing insects.O D. Alicia looked back at Vanessa and said, "Nice day, huh?" Which system of equations shows a solution of (3. 5, 4)?. The polygons are similar. The area of one polygon is given. Find the area of the other polygon. can you have black coffee when fasting for blood work In today's demonstration, what statement is true?Question 4 options:Energy was created when the ball began moving down the ramp.Potential energy converted to kinetic energy when the ball started moving down the ramp.Kinetic energy converted to potential energy when the ball started moving down the ramp.Energy was destroyed as the ball came to a stop. How do you un rewrap something? The frequency of a wave is 4hz. If the wavelength is 2m how fast is the water moving?I need the Formula,Known,Substitute & Solve Answer with Units Three people are trying to move a box. Which set of forces will result in a netforce on the box of 20 N to the left? PLEASE HELP I HAVE A TIME LIMIT ON THIS!! N2 is the chemical formulafor what compound?A. AmmoniumB. Nitrogen gasC. Nitrite acid values or lesson you have learned from the text about Still I Rise which of the following is a long term effect of alcohol abuse?a need for liver transplantswelling of the brainheart attackconstant headaches Erin made cookies in the shape of animals. Out of the 40 cookies she made, 16 of them were shaped like a giraffe. What percent of the cookies were shaped like giraffes? How has UNO contributed in the development and peace process in nepal Donna buys 400 shares of stock for $23 per share and pays a 1% commission. She sells them 6 years later for $23.25 per share and pays a flat fee of $30.00. What is her total purchase cost? PLEASE HELP Solve for x a rocket ship is moving through space at 1000 m/s. It accelerates in the same direction at 4m/s/s. What is its speed after 100 seconds The first step in sensation for some sensory systems is the __________, which modify incoming stimuli. Sensory receptors accessory structures absolute thresholds thermoreceptors. Math is multi-cultural, analytical, timeless and hands-on. Provide a piece of mathematical concept, hypothesis, law, paradox, rule or theorem to prove this statement. a truck in a traffic circle travels in a circular path at constant speed v0 while passing through region x of the circle, as shown in figure 1 above. a diagram representing the forces exerted on the truck in region x is shown in figure 2. at a later time a car with less mass than the truck passes through region x at the same speed and the same distance from the center of the traffic circle as the truck. the coefficient of friction between the cars tires and the ground is the same as that for the trucks tires and the ground. which of the following diagrams could represent the forces exerted on the car in region x compared to the truck in region x ? assume that the length of each arrow is proportional to the magnitude of the force represented by the arrow.