How many times does the rotation R(120°, P) need to be applied to a figure to map the figure to itself?

Answers

Answer 1

In order to map a figure to itself, it must be rotated 360°. Hence, the rotation R(120°) needs to be applied three times.

What is the rotation of a figure?

A rotation is a transformation that rotates the figure clockwise or counterclockwise. A figure can be rotated 90°, or a quarter turn, either clockwise or counterclockwise. You have rotated the figure 180° when you spin it precisely halfway. Turning it all the way around causes the figure to revolve 360°.

A rotation is a sort of transformation that rotates each point in a figure a specific number of degrees around a particular point.

Learn more about maps:
https://brainly.com/question/1565784
#SPJ1

Related Questions

Base on map, explain the geographic context (Geographic Context—refers to where this historical development/event is taking place and why it is taking place there.) for the historical development shown in map of the Qin and Han Empires 221 BC- 220 AD.

Answers

The historical development taking place on the map of the Qin and Han Empires between 221 BC and 220 AD is the Qin Dynasty taking over from the Han Dynasty.

Why did the Han Dynasty fall?

The reason for the fall of the Han Dynasty happened because there was a series of internal strife between strong military leaders who were not strong enough to take over China and unite it. This all came to an end in 221 BC when the Qin Dynasty was able to take over much of China, thereby uniting it under a single government for the first time in the long time.

This led to the end of the Han Dynasty. To be able to take over China however, the Qin had to be content with not taking all of China under the Han because they were not strong enough. As a result, there were attacks against the Qin such that it did not last as an empire and had to be dissolved less than 20 years later in 206 BC.

Find out more on the Qin Dynasty at https://brainly.com/question/8390844

#SPJ1

Shanvi’s family lives in a town that grew up around Interstate Highway 95 in New Mexico; the town is a good stopping place for trucks coming from California with imported goods from Asia that were loaded in the ports of California. What type of layout might Shanvi’s town be likely to have?

A.
linear village

B.
dispersed settlement

C.
cluster village

D.
urban center

Shanvi’s family lives in a town that grew up around Interstate Highway 95 in New Mexico; the town is a good stopping place for trucks coming from California with imported goods from Asia that were loaded in the ports of California. What type of layout might Shanvi’s town be likely to have?

A.
linear village

B.
dispersed settlement

C.
cluster village

D.
urban center

Shanvi’s family lives in a town that grew up around Inte

Answers

Answer:

B so yet but also fanboys

How many contour intervals will a topographic map have?

Answers

Answer:

there are 3 kinds of intervals

The number of contour intervals on a topographic map is determined by the range in elevation from the lowest point to the highest point in the area being mapped.

Generally speaking, the greater the range in elevation, the more contour intervals need to be used. For example, if the range in elevation is just a few meters, then it will have just two contour intervals. In contrast, if the range of elevation is very large (e.g. tens or hundreds of meters), then the topographic map may have up to 10 or more contour intervals.

The contour interval of a topographic map also depends on the purpose of the map. For example, if the topographic map is intended to show small variations in elevation, then a smaller contour interval will be used. On the other hand, if the map is intended to show larger variations in elevation, then a larger contour interval may be used.

In addition, some topographic maps may also include supplemental contour intervals that are used to highlight areas of special interest, such as a mountain peak or a stream.

Learn more about contour intervals:

brainly.com/question/13823398

Which of the following is a consequence of advances in agriculture
technology?
A. Production of food increases, which can help feed the world's
hungry.
B. Pollution decreases.
O C. More water is used per person.
D. Production of food decreases because advanced technology is
expensive.

Answers

Among the above option a and b can be correct.

Advancement in agriculture technology influences different things and positively impact different stakeholders respectively, like the options available as the consequences of the advances in agriculture.

It helps in increasing the food production which helps in reducing the world's hunger as the hunger issues increases with capitalism (alienation of products from labor)

Next it also helps in reducing pollution with the usage of advance technology because they will be more energy efficient and also reducing greenhouse gas emissions that is major cause of pollution.

Smart agriculture is now the need for the world with the advancement of agriculture to make agriculture climate resistant.

To know more about advancement in agriculture click below

https://brainly.in/question/30338890

https://brainly.com/question/14641669

based on the survivorship curves shown below, which of the following is a possible reason for the change in the shape of the curve from 1900 to 1980?

Answers

Based on the survivorship curves shown below, a possible reason for the change in the shape of the curve from 1900 to 1980 is Improvements in healthcare services and medical research

What is healthcare services?

Generally, Health care is comprised of a variety of different professions, including but not limited to medicine, dentistry, pharmacy, midwifery, nursing, optometry, occupational therapy, physical therapy, sports training, and other related fields.

The provision of basic, intermediate, and tertiary care, in addition to work done in public health, are all included in this category of labor.

Answers

The environmental changes that are observed in year 1990, 2005 and 2020 are Rise in Temperature around "6-8 degrees" centigrade, Increase in Population, Deforestation and increase in Pollution.

Causes for the environmental changes are Rise in Temperature due to increase of Industries, Usage of Plastic Bags, CFCs in Ac and Refrigerators.Cutting of forests (Deforestation) for Humanneeds.

Increase in Population there is a shortage of natural resources with increase in population. Which Leads to increase in pollution also for more population we need more resources but in nature there are limited resources only.

Increase in Pollution this is mainly because of Industries pollutants releasing from industries. In the year 2020 due to Covid -19 Lockdown we can observe the positive changes in environment.

To Know more about Environment:https://brainly.com/question/24182291

using the image shown below, how would you know which rock is older h or c? i.e. which of these relative dating principles would be most useful?

Answers

From the image, C is older than H, reason is rocks are created by the accumulation of layers over time. Because it forms earliest, the lowest layer of rock is the oldest. Igneous rocks are examples of rocks, and they are formed as a result of the crystallization of molten magma

The Formation of rocks

Igneous rocks are made of melt or magma that has crystallized. The melt is composed of different parts of previously existent rocks that have undergone melting along subduction zones or within the Earth's mantle.

The hot melt flows upward through the cooler country rock. As it flows, it cools, and via a process called fractional crystallization, different types of rocks will form. At mid-ocean ridges, in areas of island arc volcanism, or in intra-plate hotspots, igneous rocks can be observed.

Metamorphic rocks: initially igneous or sedimentary, metamorphic rocks have undergone varied degrees of pressure and heat within the Earth's crust. The processes involved will alter the makeup and structure of the rock, and it might be challenging to determine what they were originally made of. Mountainous regions are often where one can find metamorphic rocks.

learn more on formation of rocks here https://brainly.com/question/6996995

#SPJ4

2. What is it called when machines do the
work that humans used to do?

Answers

It's called labor automation.

Labor automation is basically using technology as substitute for human labor which takes away jobs but makes production more efficient

What type of plate boundary is illustrated in the image?

Answers

the answer to this question is Convergent, I just took the test on Edge and I got it correct.

conservative plate boundary

I need help look at picture 50 points

Answers

I think the answer is root

Hope this helps!

Atmosphere activity
Biosphere activity

Answers

The atmosphere refers to the part of the Earth which contains the layer of gases, known collectively as air. These gases are retained by Earth's gravity that surrounds the planet and forms its planetary atmosphere.

The biosphere refers to the earth portion upon which life exists. The biosphere comprises of the deepest root systems of trees, to the dark environment of ocean trenches, to lush rainforests and high mountaintops. Scientists describe Earth in terms of spheres.

what is the Earth System?

The Earth System refers to the summation of the all the interacting components on earth. The Earth System describes how these System inter relate to support life. The Earth systems include the following

GeosphereBiosphereCryosphereHydrosphereAtmosphere

The Geosphere refers to the hard part of the Earth. It includes all the rocks that make up Earth, from the partially melted rock under the crust

The cryosphere refers to the frozen water part of the Earth system.

The Hydrosphere refers to the liquid part of the Earth system.

Learn more about the Earth Systems at https://brainly.com/question/29035576

#SPJ1

Using the Hertzsprung-Russell diagram below, determine which type of star has the following characteristics: A star with surface temperature 10,000 K and luminosity 0.001 times that of the Sun.

Answers

The type of star has the following characteristics: A star with a surface temperature of 10,000 K and luminosity 0.001 times that of the Sun is the white dwarf

What is a white dwarf?

Generally, When stars like the Sun have burned up all of their nuclear fuel, they degenerate into a state known as a white dwarf.

When this sort of star is getting close to the conclusion of its nuclear burning stage, the majority of its outer material is ejected, which results in the formation of a planetary nebula. The only part of the star that is still intact is its fiery core.

The following are some of the distinguishing features of this kind of star: The white dwarf is a kind of star that has a surface temperature of 10,000 Kelvin and a brightness that is 0.001 times that of the Sun.

Answers

Answer:

Explanation:

Answer:

Explanation:

Question 5 of 5
Which tool helps geographers display data that have been gathered about the
population of a specific location?
A. Charts and graphs
B. Three-dimensional models
C. Satellite images
•
D.
Geographic information systems
SUBMIT

PLSSS HELP

Answers

charts and graphs! (A)
they give a visual representation of something big, in a small, mathematical, format. organizing your data, in a sense.
data has already been collected and put into the chart/graph.

Part B
The following figures show four stages that occur during the formation of a one-solar-mass star. Rank these stages based on the central temperature, from highest to lowest.
View Available Hint(s)

Answers

Based on the order in which they occur, from first to last.

molecular-cloud fragment, contracting cloud-trapping infrared light, protostar with jets, main-sequence star

What is a molecular-cloud fragment?

Generally, The phenomenon known as cloud fragmentation is the clumping together of a cloud (such as a molecular cloud) as a result of gravitational instability.

Cloud fragmentation occurs in regions of the cloud where the forces are balanced in such a way that a volume of high density increases its own density, decreasing the density of the volume around it, and effectively breaking it up into pieces.

Read more about the molecular-cloud fragments,

https://brainly.com/question/4304959

#SPJ4

Other Questions

you're working with a car manufacturer that is looking to set up a campaign within campaign manager 360. they've just had their campaign manager 360 network created. what steps, in order, should you take to set up their campaign? this project is designed for you to have a complete understanding of what is entailed in buying a home. for most people, their home purchase is the largest financial purchase they will make in their lifetime, so understanding how the process works and how much it will cost you, are key elements you need to know. while there is much detail to be provided, you will need all this information when it is your turn to purchase the home of your dreams! what is the nonhuman things in the sentence the winter wrapped its icy claws around northeast pennsylvania. which measures can be taken to prevent wrong-site, wrong-client, wrong-procedure surgical errors? select all that apply. supplements of the antioxidant nutrients appear to prevent or slow the progression of cataracts. a. true b. false imagine you discover a mutation in a eukaryotic gene that leads to loss of function of the protein that it encodes. you determine the mutant genes nucleotide sequence from start site for transcription to the termination point of transcription and find no differences between the mutant gene and the normal gene. where on the dna could the mutation be? bronco the skydiver falls toward earth. the attraction of earth on bronco pulls him down. the reaction to this force is Is the skeletal system interdependent on the integumentary system? A. Yes, the skeletal system is interdependent of the integumentary system. The main objective is the bones rely on the skin for the synthesis of vitamin D3. Without vitamin D3 (a steroid that is converted to calcitriol), a normal calcium metabolism wouldnt be maintained). Calcium is one of the hearts of bone structure; with a lack of calcium, the bones would become very brittle and lead to cases such as osteoporosis and multiple fractures.B. No, because the skeletal system consists of both fused and individual bones supported and supplemented by ligaments, tendons, muscles, and cartilage. It serves as a scaffold that supports organs, anchors muscles, and protects organs such as the brain, lungs, and heart. And the integumentary system is the organ system that protects the body from damage, comprising the skin and its appendages (including hair, scales, feathers, and nails). So, therefore, we need the integumentary system to protect the skeletal system at all times, when we move our skin moves. C. Yes, the skeletal system is interdependent on the integumentary system. One function of the integumentary system is to synthesize vitamin D3. The skeletal system depends on the synthesis of vitamin D for bone growth and bone remodeling by the osteoblast and osteoclast. Vitamin D is needed to absorb calcium into the circulatory system from the digestive system.(HELP NEEDED ASAP. I REALLY APPRECIATE IT) the nurse is conducting a health assessment for a school-age child who is new to the pediatric practice. which questions would the nurse ask the child and parents related to growth? select all that apply. one, some, or all responses may be correct. 6. Mikey can kick the ball to Sage with a force of 20 N, making it travel 60m. Give the work done on the ball. since the drafting of the constitution, both the executive branch and congress have managed to expand their powers. which power is often cited as an example or congress exerting too much power over states rights? why does Melly visit Mama Tochi in the story The Dive? for a hypothetical mouse population, determine whether the actions described will increase kkk , decrease kkk , or not affect kkk . drag each statement to the appropriate bin. Which of the following doesnot describe a sampling method that has a potential source of voluntary response bias for the administration of a survey about college athletics at a university?giving the survey to 30 students selected at random from each of the eight dorms on campus this treatment for conduct disorder combines both cognitive-behavioral and family interventions, with the goal of improving family functioning and teaching caregivers how to stop rewarding unwanted behaviors and consistently reward proper behaviors. Which sentence uses commas correctly to set off a nonrestrictive clause?OA. The children, who were usually happy had become upset.B. Peter who is my best friend, plays the guitar and the piano.C. I had to fix my bike, which I bought less than a year ago.D. Spider-Man, who is known for being able to shoot webs from hiswrists is my favorite superhero.SUBMIT The true average diameter of ball bearings of a certain type is supposed to be 0.5 in. A one-sample t test will be carried out to see whether this is the case. What conclusion is appropriate in each of the following situations? (a) n 15 t 1.66 a 0.05 o Reject the null hypothesis. There is sufficient evidence that the true diameter differs from 0.5 in o Reject the null hypothesis. There is not sufficient evidence that the true diameter differs from 0.5 in o Do not reject the null hypothesis. There is sufficient evidence that the true diameter differs from 0.5 in o Do not reject the null hypothesis. There is not sufficient evidence that the true diameter differs from 0.5 in g which of the following objects has the greatest amount of momentum? assume all the objects are moving along the positive horizontal axis. group of answer choices a 1 kg block with a 5 m/s velocity a 5 kg block with a 1 m/s velocity a 10 kg block with a 2 m/s velocity a 2 kg block with a 5 m/s velocity a 3 kg block with a 1 m/s velocity Select ALL the correct answers.The graph shows a linear relationship.Select all the true statements. A right triangle with its hypotenuse along the line from (4,2) to (8,4) has legs measuring 4 units and 2 units. A right triangle with its hypotenuse along the line from (2,1) to (4,2) has legs measuring 3 units and 1 unit. A right triangle with its hypotenuse along the line from (2,1) to (4,2) has legs measuring 2 units and 1 unit. A right triangle with its hypotenuse along the line from (2,1) to (6,3) has legs measuring 4 units and 1 unit. A right triangle with its hypotenuse along the line from (4,2) to (8,4) has legs measuring 4 units and 3 units. at a hospital, 40% of the nurses work in labor and delivery. if 20 nurses work in labor and delivery. how many nurses work at a hospital?