Answer:
5
Explanation:
mark me brainliest!
Mole ratios used for conversions come from?
which one of these three elements conatain the most protons
A.copper
B. radon
C. sodium
Answer:
i think it's B sorry if i'm wrong
A chemical lab has isolated a metallic element from a compound. The metal
is highly reactive by itself and reacts with chlorine in a 1 to 1 ratio. In which
group of the periodic table is this element most likely found?
O A. 18
B. 17
C. 1
D. 2
SUBMIT
Answer:
C. 1
Explanation:
Group 1 metals are highly reactive (such as Sodium) and form 1 to 1 ratio of ions with halogens (such as chlorine, bromine etc).
This happens because group 1 element can donate 1 valence electron to fulfill their octet rule and halogens can receive 1 valence electron to fulfill their octet.
The volume of a gas is 2250 mL at 290 kPa what will the volume be when the pressure is reduced to .9 atm
Answer:
7178.22 mL
Explanation:
Applying,
PV = P'V'................. Equation 1
Where P = Initial pressureof gas, V = Initial volume of gas, P' = Final pressure of gas, V' = Final volume of gas.
make V' the subject of the equation
V' = PV/P'.............. Equation 2
From the question,
Given: V = 2250 mL, P = 290 kPa, P' = 0.9 atm = (101×0.9) = 90.9 kPa
Substitute these values into equation 2
V' = (2250×290)/90.9
V' = 7178.22 mL
When 1 mol of methane is burned at constant pressure, −890 kJ/mol of energy is released as heat. If a 1.67 g sample of methane is burned at constant pressure, what will be the value of ∆H
Answer:
[tex]\Delta H=-92.7kJ[/tex]
Explanation:
Hello there!
In this case, according to the given information, we can infer that 890 kJ of energy are released when 1 mole of methane is burned; however, to find the total heat when 1.67 grams are burned, we first need to calculate the moles in this mass of methane:
[tex]1.67gCH_4*\frac{1molCH_4}{16.04gCH_4}=0.104molCH_4[/tex]
And thus, for calculating the resulting ∆H, we proceed as follows:
[tex]\Delta H=-890kJ/mol*0.104mol\\\\\Delta H=-92.7kJ[/tex]
Regards!
Energy that is made from the power of moving water
a
b
ОООО
wind
hydroelectric
coal
с
d
biomass
Hydroelectric energy is produced.
When a car uses a gallon of gas, how much carbon dioxide is emitted into the environment? I give branlyest
Answer:
19.5
Please tell me if wrong.
When a car uses a gallon of gas, 22.0 miles per gallon of carbon dioxide is emitted into the environment.
What happens when carbon dioxide is emitted?After being released into the atmosphere, carbon dioxide (CO₂) is initially quickly dispersed among the atmosphere, the upper ocean, and plants.
The sources of carbon dioxide emissions include both natural and human activities. Decomposition, oceanic discharge, and respiration are examples of natural sources.
The annual carbon dioxide emissions from a typical passenger automobile are around 4.6 metric tonnes. This estimates that the typical gasoline car on the road today gets roughly 22.0 miles per gallon of fuel and travels about 11,500 miles annually.
Thus, 22.0 miles per gallon of carbon dioxide is emitted into the environment.
To learn more about the carbon dioxide, follow the link;
https://brainly.com/question/3049557
#SPJ6
In the equation C H4 + O2 C O2 + H2 O, what are the products?
A) C H4 + H2 O
B) C O2 + H2 O
C) O2 C O2
D) C H4 + O2
Answer:
Option B clearly shows the Products of the reaction
Another term for natural radioactive decay into another element is
Answer:
The process of unstable (or radioactive) atoms becomes stable by emitting radiation. This event over time is called radioactive decay. Alpha decay results in the loss of two protons and two neutrons from the nucleus
Answer:
radioactive disintegration
Explanation:
Describe the concept of using radioactive elements to establish an age for a fossil. Be sure to include how the parent and daughter elements are used in the determination of age. Answer in 1 paragraph.
Answer:
The nuclear decay of radioactive elements is a process that is a useful tool for determining the absolute age of fossils and rocks. It is used as a clock, in which daughter elements or isotopes converted from parent isotopes by decaying at a particular time.
Radioactive decay rates are constant and do not change over time. It is measured in half-life. A half-life is a time it takes half of a parent isotope to decay and converted into a stable daughter isotope. How many parent isotopes and daughter isotopes present in the fossil or their abundance can help in determining the age of fossil or rock.
Conversion of solid state to liquid state is called fusion; what is meant by latent heat of fusion?
Answer:
Explanation:
Latent heat of fusion, also known as enthalpy of fusion, is the amount of energy that must be supplied to a solid substance (typically in the form of heat) in order to trigger a change in its physical state and convert it into a liquid (when the pressure of the environment is kept constant). For example, the latent heat of fusion of one kilogram of water, which is the amount of heat energy that must be supplied to convert 1 kg of ice without changing the temperature of the environment (which is kept at zero degrees celsius) is 333.55 kilojoules
The latent heat of fusion of a substance also accounts for the energy required to accommodate any increase in the volume of the substance post the change of its physical state. The temperature at which the substance undergoes the phase transition is called the melting point of the substance. Unless specified to be otherwise, the pressure of the environment (when expressing the latent heat of fusion of a substance) is always assumed to be 1 atmosphere of pressure (which is roughly equal to 101.325 kilopascals).
is A tomato smells rotten a chemical
reaction
Answer:
yup
Explanation:
because chemical change took place
the reaction cant be reversible
How do you think the human population has changed over time? What makes you say that?
Answer:The world population increased from 1 billion in 1800 to 7.7 billion today. The world population growth rate declined from 2.2% per year 50 years ago to 1.05% per year. Other relevant research: World population growth – This article is focusing on the history of population growth up to the present.
Explanation:
An ideal gas is contained in a cylinder with a volume of 5.0x102 mL at a temperature of 30°C and a pressure of 710. Torr. The gas is then compressed to a volume of 25 mL, and the temperature is raised to 820° C. What is the new pressure of the gas?
Answer:
51207 torr is the new pressure of the gas
Explanation:
We can solve this question using combined gas law that states:
P1V1T2 = P2V2T1
Where P is pressure, V volume and T absolute temperature of 1, initial state and 2, final state of the gas
Computing the values of the problem:
P1 = 710torr
V1 = 5.0x10²mL
T1 = 273.15 + 30°C = 303.15K
P2 = ?
V2 = 25mL
T2 = 273.15 + 820°C = 1093.15K
Replacing:
710torr*5.0x10²mL*1093.15K = P2*25mL*303.15K
3.881x10⁸torr*mL*K = P2 * 7.579x10³mL*K
P2 = 51207 torr is the new pressure of the gas
What is the rate of diffusion of NO gas to CO gas?
Answer:
0.97
Explanation:
Let R₁ represent the rate of diffusion of NO.
Let R₂ represent the rate of diffusion of CO.
Molar mass of NO (M₁) = 14 + 16 = 30 g/mol
Molar mass of CO (M₂) = 12 + 16 = 28 g/mol
Thus, the rate of NO to CO can be obtained as follow:
R₁ /R₂ = √(M₂/M₁)
R₁ /R₂ = √(28/30)
R₁ /R₂ = √(28/30)
R₁ /R₂ = 0.97
R₁ : R₂ = 0.97
NO : CO = 0.97
Therefore, the rate of diffusion of NO to CO is 0.97
Most of the electricity that is used in everyday life comes from________ current.
Fill in the blank
Answer:
electric is your answer :)
Explanation:
Edge STEM instruction/assignment perhaps???
Answer:
A. C (alternate current)
When temperature drops, (for example from 20 degrees celsius to 10 degrees celsius)
a.) energy increases
b.) particles move slower
c.) particles collide more often
d.) pressure increases
Answer:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Explanation:
In the Celsius scale each degree is one part of 100 degrees. This is because in this scale the difference between boiling and freezing temperatures of water is 100 ° - 0 ° = 100 °, so one degree Celsius is one part of 100.
In the Farhenheit scale, each degree is one part of 180 degrees. This is because in this scale the difference between the boiling and freezing temperatures are 212 ° - 32 ° = 180°, so one degree Fahrenheti is one part of 180.
That means that 1 °C is a larger amount than 1 °C, so 20°C is a larger amount than 20°F.
Conclusion: 20 degree change represents a larger change in Celsius scale.
Someone please help me
Answer:reflection
Explanation:
what physical and social systems are involved in the service industry
Answer:
Hey mate.....
Explanation:
This is ur answer........
For example, the communications industry includes all of the physical and social systems that produce books, newspapers, magazines, radio and television broadcasts, billboard advertisements, Internet websites, telephones, and telecommunications, such as the GPS.
Hope it helps!
Brainliest pls!
Follow me! :)
How much energy required to raise the temperature of lead by the same degrees.
Answer:
If a one kilogram block of lead absorbs 2,000 J of energy then the temperature rise will be larger. If 1,000 J of heat is absorbed by a 2 kg block of lead then the temperature of the block doesn't rise as much since the energy is shared between more particles.
Explanation:
Explain the reason that the atomic emission spectrum of hydrogen contains only four lines.
A)
The hydrogen atoms form a continuous series of quantized energy levels
that transmute at a variety of frequencies.
B)
Hydrogen atoms contain a limited number of quantized energy levels that
emit radiation at a limited number of frequencies.
C)
Many hydrogen atoms accomodate an array of quantized energy levels that
can release energy at a progression of frequencies.
A hydrogen atom consists of a sequence of quantized energy levels that
incorporate radiation only from consecutive frequencies.
D)
Answer:
Though a hydrogen atom has only one electron, it contains a large number of shells, so when this single electron jumps from one shell to another, a photon is emitted, and the energy difference of the shells causes different wavelengths to be released... hence, mono-electronic hydrogen has many spectral lines.
Explanation:
thank me later
The reason that the atomic emission spectrum of hydrogen contains only four lines is the hydrogen atoms form a continuous series of quantized energy levels that transmute at a variety of frequencies.
What is atomic emission spectrum of hydrogen?The emission spectrum of hydrogen consist of numerous spectral series, the wavelength is postulated by Rydberg formula.
The reason behind the lines of spectrum is the transition of electron between two energies.
Thus, the correct option is A.
Learn more about atomic emission
https://brainly.com/question/11289486
#SPJ2
PLEASE HELP
Which chemical reaction supports the Law of Conservation of Mass?
Answer:A
Explanation:
If a mineral has a mass of 20 and a volume of 4, What is its density?
Answer:
5 g/cm^3
Explanation:
Density of a substance= mass/ volume
Given:
volume = 4,
mass = 20
Assume volume is in cm^3
Mass is in "g"
Then substitute the values
Density of the substance=( 20/4)
= 5 g/cm^3
What is diffusion? How does the motion of gas molecules explain how a gas diffuses throughout a room?
Answer:
Diffusion in gases
Diffusion is driven by differences in concentration. When chemical substances such as perfume are let loose in a room, their particles mix with the particles of air. The particles of smelly gas are free to move quickly in all directions
Explanation:
hope this helps
If 250. ML of water are poured into the measuring cup, the volume reading is 8.45 oz . This indicates that 250. ML and 8.45 oz are equivalent. How many milliliters are in a fluid ounce based on this data?
Answer:
[tex]1oz=29.589ml[/tex]
Explanation:
From the question we are told that:
Initial Volume [tex]v_1=250ml[/tex]
Final Volume [tex]v_2=8.45oz[/tex]
Generally the equation for one ounce is mathematically given by
[tex]1oz=\frac{v_1}{v_2}[/tex]
Therefore
[tex]1oz=\frac{250}{8.45}[/tex]
[tex]1oz=29.589ml[/tex]
A Starting substance in a chemical reaction is called a _______________.
1. reactant
2. product
3. chemical reaction
4. physical reaction
Answer:
1.)REACTANT
These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.The interaction of the skeletal and muscular systems to create movement and locomotion is regulated by which organ system?
Answer:
The muscoloskeletal system
Explanation:
The musculoskeletal system is made up of the body's bones (the skeleton), muscles, cartilage, tendons, ligaments, joints, and other connective tissue that supports and binds tissues and organs together. Its primary functions include supporting the body, allowing motion, and protecting vital organs.
If 10.0 grams of sodium phosphate are reacted, what mass of barium nitrate is
required?
Answer: The mass of barium nitrate required is 23.91 g
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of sodium phosphate = 10.0 g
Molar mass of sodium phosphate = 163.94 g/mol
Plugging values in equation 1:
[tex]\text{Moles of sodium phosphate}=\frac{10.0g}{163.94g/mol}=0.061 mol[/tex]
The chemical equation for the reaction of sodium phosphate and barium nitrate follows:
[tex]3Ba(NO_3)_2+2Na_3PO_4\rightarrow Ba_3(PO_4)_2+6NaNO_3[/tex]
By the stoichiometry of the reaction:
If 2 moles of sodium phosphate reacts with 3 moles of barium nitrate
So, 0.061 moles of sodium phosphate will react with = [tex]\frac{3}{2}\times 0.061=0.0915mol[/tex] of barium nitrate
Molar mass of barium nitrate = 261.337 g/mol
Plugging values in equation 1:
[tex]\text{Mass of barium nitrate}=(0.0915mol\times 261.337g/mol)=23.91g[/tex]
Hence, the mass of barium nitrate required is 23.91 g
How many grams of NaCl are in 1.25 X 1024
molecules of Naci? Use one decimal place
Answer:
121.1g
Explanation:
First, we need to convert the number of molecules of NaCl to moles (n) by dividing by Avagadro number
That is, n = number of molecules ÷ 6.02 × 10²³
n = 1.25 X 10²⁴ ÷ 6.02 × 10²³
n = 1.25/6.02 × 10^ (24-23)
n = 0.207 × 10¹
n = 2.07moles
Using the formula; mole = mass ÷ molar mass
Molar mass of NaCl = 23 + 35.5 = 58.5g/mol
mass = molar mass × mole
mass = 58.5 × 2.07
mass = 121.1g
How many grams of LiF are needed to make 87 g LiF solution into a
34.5% solution?
solution?
answer options:
30 g LIF
0.01 g LIF
45.8 g LIF
0.02 g LIF
Answer: 30 g LiF
Explanation: