How many neutrons are in K-37?

Answers

Answer 1

Answer:

is this physics

pls check your questions and try again


Related Questions

Why does liquid move like it does when heated on the right side?

Answers

Answer:Liquids expand for the same reason, but because the bonds between separate molecules are usually less tight they expand more than solids.

Explanation:Heat causes the molecules to move faster, (heat energy is converted to kinetic energy ) which means that the volume of a gas increases more than the volume of a solid or liquid.

what is combined to get calcium chloride​

Answers

Calcium chloride can be created by neutralising hydrochloric acid with calcium hydroxide.

Answer:

See below

Explanation:

This is a simple reaction.

Calcium and chlorine molecule are combined to get calcium chloride.

Ca + Cl₂ → CaCl₂

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

~AH1807

Synthetic fibers, like plastic, are derived from organic compounds. These fibers have been chemically changed by humans to last longer for better storage and more effective uses. These fibers are stronger than naturally occurring fibers like cotton and wool. Which of the following is a downside to these synthetic fibers when compared to natural fibers?
A.
The longer lasting material is more difficult to break down.
B.
The longer lasting material is less useful in manufacturing.
C.
The longer lasting material is not able to withstand high temperatures.
D.
The longer lasting material makes the fibers more expensive to buy.

Answers

The downside of this is that the longer lasting material is more difficult to break down.

Both natural fibers and synthetic fibers are polymer materials. Polymer materials are materials that are made by the agglomeration of small molecules called monomers.

The natural fibers are less long lasting than the synthetic fibers. The downside of this is that the longer lasting material is more difficult to break down. As a result of these, synthetic fibers lead to environmental pollution problems.

Learn more: https://brainly.com/question/25140263

Answer:

the longer lasting material is more difficult to break down.

Explanation:

How did the Heisenberg uncertainty principle contribute to the idea that electrons occupy “clouds,” or “orbitals”?​

Answers

How did the Heisenberg uncertainty principle contribute to the idea that electrons occupy "clouds" or "orbitals"? Because the exact position of the electron is not known,it must be assumed that the electron takes up the entire space in an orbital.

17. The choose the answer that is correct about the Earth's mantle.

made of magnesium, iron, and calcium

made of rocky materials and water

made of the same rocky materials as the crust

made mostly of iron and nickel

Answers

it's actually made of silicates and believe it or not magnesium is a silicates so the closest would have to be A made of magnesium, iron, and calcium

how many molecules are in 122 grams of Cu(NO3)2

Answers

Answer:

3.917 x 10 ^ 23

Explanation:

You just want to use dimensional analysis to solve. So first start with 122g of copper(II) nitrite, and divide by the molecular weight to get it into moles. Then you know that 1 mole = 6.022 x 10 ^23 molecules (Avogadro's Number) so multiply that by your current moles. A hint for these problems always convert what you were given to moles since it is easy to get to a lot of things through them. ** Use the molar mass/molecular weight for going from grams to moles or moles to grams and use Avogadro's number when going from moles to atoms/molecules or reverse.

Hope this helps!

What state is represented by the sign (s)
liquid
gas
solid
dissolved in water

Answers

solid.

liquid is (l)

gas is (g)

dissolved in water is (aq)

3) The nucleus in a photograph of a cell measures 3 mm across. If the magnification in the photograph is x 500, what is the actual size of the nucleus?​

Answers

Answer:

1500mm oqkwndbdjdhdndjdd

A compound contains 40%carbon, 6.7%hydrogen, and 56.3%oxygen
calculate the molecular formula of the compound, if it’s vapour density is 90. Note that molecular
mass=2 x vapeur density

Answers

180 might be the answer man

Aspirin (C9H8O4) is produced from salicylic acid (C7H6O3) and acetic anhydride (C4H6O3):

C7H6O3 + C4H6O3 -----> C9H8O4 + HC2H3O2

(a) How much salicylic acid is required to produce 1.5 x 10^2 kg of aspirin, assuming that all of the salicylic acid is converted to aspirin? (b) How much salicylic acid would be required if only 80% of the salicylic acid is converted to aspirin? (c) What is the theoretical yield of aspirin of 185 kg of salicylic acid is allowed to react with 125 kg of acetic anhydride? (d) If the situation described in part (c) produces 182 kg of aspirin, what is the percentage yield?

Answers

Explanation:

the equation is yes a the line of jointing line passing the ball to is

How do mixtures form?

Answers

Answer:

A mixture is created when two or more different substances are physically combined and can be separated back into its original substances. A chemical reaction occurs when two or more substances are combined to form a new substance and cannot be separated back into its original substances.

Explanation:

Answer:

A mixture is created when two or more different substances are physically combined and can be separated back into its original substances.

Explanation:

Hope it helps

How many particles would be found in a 12.7 g sample of ammonium carbonate? Show workkk

Answers

Answer:

7.8286×10²¹ particles

Explanation:

give me brainlist please

Earth’s layers are determined by their physical properties and chemical composition. In the lesson, you learned about each of Earth’s layers, what the layers are made of, and why they are important to the Earth. In the space below, write about how the atmosphere may be classified. Would it be part of the lithosphere, or a separate layer? Explain your answer.

Answers

Answer:

The Atmosphere Is a separate layer And Also could be classified as the Closest layer

Explanation:

What is a mixture ?

How do homogeneous & heterogeneous mixtures differ ?

Answers

1st question: A mixture is when the components of a mixture can be easily separated and that the components each keep their original properties.

2nd question:A phase is any part of a sample that has a uniform composition and properties.By definition, a pure substance or a homogeneous mixture consists of a single phase. A heterogeneous mixture consists of two or more phases. When oil and water are combined, they do not mix evenly, but instead form two separate layers.

Heterogeneous mixtures are not uniform in composition. Examples would be wood or blood. Homogeneous mixtures are uniform through out. Typically you can see through them.

EARTH SCIENCE: PLEASE HELP ME !!! Which tools do astronomers use to determine the effects of collisions between galaxies? Select the two correct answers.(1 point)

computer simulations

print encyclopedia entries

space telescopes

solar system models

Answers

In studying effects of collisions between galaxies, astronomers usually make use of space telescopes.

Astronomy deals with the study of outer space. The study focuses on planets and other celestial bodies. Generally telescopes are used to study outer space. The particular type of telescope that is used depends on the need.

In studying effects of collisions between galaxies, astronomers usually make use of space telescopes.

Learn more: https://brainly.com/question/556195

Select the correct answer.
Tropical forests contain dense trees, which allow less sunlight to penetrate. Emergent trees are trees that grow to a height of more than 45 to 55 meters, above the usual height of trees in tropical forests. Which system provides the best possible explanation for why these trees grow to those heights?
A.
shunted growth pattern
B.
homeostasis
C.
due to less exposure to sunlight
D.
phototropism

Answers

B because if 7352x x 62 is 1936393 then u can divide that by 2 so it’s B

What part of the periodic table does the neutrons tell us about the element?

Answers

Answer:

The neutrons tell us if it is an isotope or not, they also hold the atom together.

Explanation:

an atom of which of the following elements can form the most bonds?
a. phosphorus
b. sodium
c. oxygen
d.oxygen

Answers

Answer:
A.phosphorus
:)

In Natural selection, who/what makes the decision about which traits are desirable and get passed to future generations?

please need help asap thank you.

Answers

Answer:

Different alleles and genes determine what gets passed down.

Explanation:

Its a pretty weird/ open ended question, but the alleles that help an organism survive, will be passed down more often because they are more "fit" and can out survive its competitors within a certain species.

Filtration of wastewater flowing over a surface of land with vegetation and water is a
an artificial wetland
a stabilization pond
a biodegradable treatment
an open aeration pond

Answers

Filtration of wastewater flowing over a surface of land with vegetation and

water is a biodegradable treatment.

Biodegradable substances are those which can be recycled for other uses

such as manure etc. The filtration of the waste water helps to remove

organic materials and pathogens present in it. The organic materials

removed can then be used for other purposes.

The pathogens are then destroyed to prevent the spread of diseases within

the area. The explanation makes biodegradable treatment most appropriate.

Read more on biodegradable treatment on https://brainly.com/question/1172912

A scientist was in the field when he saw a mineral sample. He wanted to determine the relative hardness of the mineral, so he conducted scratch tests. He summarized his results in a table. A 2 column table with 4 rows. The first column is labeled Mineral with known hardness with entries: Chalcopyrite, pyrite, Orthoclase, Quartz. Second column is labeled Was a scratch produced? with entries: Yes, Yes, Yes, No. What conclusion can you make about the hardness of the mineral?.

Answers

The mineral hardness depends on its resistance to being scratched. Mohs scale is used to determine the hardness of an unknown mineral. The unknown mineral is harder than Orthoclase, but not harder than Quartz.

-------------------------

The hardness of a mineral is its resistance to being scratched or marked on the surface by another material.

Several elements are used to test the hardness of a mineral, like another mineral of known hardness.

Many different scales can be used to identify the mineral. However, the most commonly used is the Mohs scale.

Let us say that you have two minerals. You already know which mineral is one of them and its hardness.

If the unknown mineral scratches the known mineral, means that the first one is harder than the second one.

But if the unknown mineral does not get to scratch the known one, it means they are equally hard, or the known mineral is harder than the unknown one.

In the exposed example, the table must be as follows

    Mineral                     Was a scratch produced?              

Chalcopyrite                               YES

pyrite                                           YES

Orthoclase                                  YES                                          

Quartz                                          NO                                            

Quartz is the hardest of these minerals. Its hardness level is 7 according to the Mohs scale.

Because scratches were produced using Chalcopyrite, Pyrite, and Orthoclase, we can assume that the unknown mineral is harder than these three ones.

However, no scratch was produced using quartz, suggesting that the unknown mineral is between orthoclase and quartz in the Mohs scale.

The unknown mineral is harder than Orthoclase, but not harder than Quartz. It is between 6 and 7 hardness levels.

---------------------------

You can learn more about the Mohs scale at

https://brainly.com/question/198363

https://brainly.com/question/1585664

https://brainly.com/question/10202262

Answer:

I can conclude that the mineral that the scientist found is harder than chalcopyrite, pyrite, and orthoclase, but not harder than quartz. I can also conclude that the unknown mineral is a relatively hard mineral.

Explanation:

edge example 2023

A chemist wants to extract the gold from 54.9 g of AuCl3*2H20 *gold(III) chloride dyhydrate) by electrolysis of an aqueous solution. What mass of gold could be obtained from this sample? Answer in units of g

Answers

From the information provided in the question, the mass of gold that can be obtained from this sample is 31.5 g of Au.

Given that the reduction of gold III occurs thus;

Au^3+(aq) + 3e ------> Au(s)

Number of moles of gold(III) chloride dihydrate = mass/molar mass = 54.9 g /339.35 g/mol = 0.16 moles

Number of moles of Au^3+ in  AuCl3.2H20 =  0.16 moles

Now;

1 mole of Au has a mass of 197 g/mol

0.16 moles of Au has a mass of 0.16 moles ×  197 g/mol/1 mole

= 31.5 g of Au.

The mass of gold that can be obtained from this sample is 31.5 g of Au.

Learn more: https://brainly.com/question/6284546

1. How many covalent bonds can nitrogen form?

2. Which of the following represents a covalent compound?
A. O2
B. CO2
C. Cl2
D. NaCl

3. 2. Nitrogen is a diatomic element with five valence electrons. Create a model of a molecule of nitrogen.

Answers

Answer:

1. 3 covalent bonds

2. CO2

Nitrogen can form three covalent bonds and carbon dioxide  represents a covalent compound.Molecule of nitrogen is attached in image below.

What is a covalent bond?

Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.

Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.

Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.

Learn more about covalent bond,here:

https://brainly.com/question/19382448

#SPJ6

When 25.0 g of NaCl is added to 175 g of water, the mass percent (m/m) NaCl is ________. 7.00% 8.00% 12.5% 25.6% 14.3%

Answers

Answer:

12.5%

Explanation:

percent blurf = quantity of blurftotal quantity×100quantity of blurftotal quantity×100

So for percent by mass, both quantities are expressed as mass, and it’s the mass of NaCl divided by the total mass of the solution, then times 100%

mass % NaCl = 25 g/175g×100

mass %NaCl = 14.3%

Na2SO3" represents sodium sulfite. What does the 4 mean in the formula 4Na2SO3? There are four atoms of sodium. There are four atoms of sodium sulfite. There are four molecules of sodium sulfite. There are four elements in sodium sulfite. 7
The World on Turtle's Back" is a creation myth because it focuses on characters whom the Iroquois considered "gods. " is an Iroquoian story about people and animals who talk to each other. Explains how the Iroquois believe that the earth was created. Describes Iroquoian social and cultural values.

Answers

The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.

A molecule is formed when two or more atoms of the same or different elements come together. The formula of the molecule must reflect the number of atoms from which it is formed. The designation "4" before Na2SO3 simply means that there are four molecules of sodium sulfite.

The "The World on Turtle's Back" is a legend creation story. According to this story, the world was created on a giant turtle back. The folktale is common among the  Iroquois Native Americans.

Learn more: https://brainly.com/question/19922822

A student pours ammonium nitrate into a container of room temperature water. The student stirs the mixture with a stirring rod and then feels the outside of the container, which is cold to the touch. Which material is part of the system that absorbed heat?

the water

the air

the stirring rod

the container

Answers

The material that absorbs the heat of the system is water owing to its high specific heat capacity.

The specific heat capacity of a substance refers to the amount of heat that is capable of increasing the temperature of 1 Kg of a body by 1 K. The higher the specific heat capacity, the more the amount of heat that the body can absorb without temperature change.

The material that absorbs the heat of the system is water because water has a higher specific heat capacity than all the other materials present.

Learn more about specific heat capacity: https://brainly.com/question/2530523

The material which is part of the system that absorbed heat is; The water.

Discussion:

According to the question;

Water was initially at room temperature.We know by convention, ammonium nitrate is a cold substance.

In essence, the heat liberated from the system must have been absorbed by the water so that the outside of the container after mixing becomes cold.

This is so because water has a high specific heat capacity.

Read more on heat capacity:

https://brainly.com/question/16559442

Is this statement true or false?


A compound is a substance made of two or more elements joined in a chemical reaction.



true


false

Answers

The correct answer is False.

This is false I hope this helps goodbye

what is an example of force pair​

Answers

he interaction between a baseball bat and a baseball

how many moles of water in 100 grams

Answers

Answer:

There are approximately 5.55 moles

Explanation:

why does a oxygen atom form a 2- ion

Answers

Answer:

It's because it has 2 electrons on its outer ring

Explanation:

It has a -2 ion due to it having 2 more electrons than protons making it an overall negative. It's well known in chemistry that the first ring can only hold 2 electrons while the second and furthermore can hold up to 8. But what happens when you have 9? a new ring starts and it would only contain 1 electron.. In our case here it has 2 more electrons than protons and those 2 electrons are located on the outer ring

Other Questions
Write all permutations of the letters E, F, G, and H if the letters F and G must remain between the letters E and H. (Enter your answers as a comma-separated list of four letter combinations. For example, the combination "C,D,E,F" should be entered as CDEF.) im asking so many questions bc my mom my get mad so pls help me and answer all the questions provided What is power of government of the The United States will Change to the Metric System in 2020 Use the story below fill I the questions. A) Origin and developmentB) EarthC) LifeD) Early technologies Which President Never Got Gray Hair?-John F Kennedy! You have to multiply 7 by 19. Which equation uses the Distributive Property to take this problem apanA. 7(10 + 9) = 70 + 16CB B. 7(10 + 9) = 70 + 9c. 7(10 + 9) = 70 +63D. 7(10 + 9) = 17 +63 Que plan economico propone Faustino Sarmiento respecto a la ganadera de Facundo Quiroga? g(x) = 3x + 1; Find g(7) The Gordon family plans to buy a TV. One TV has a purchase price of $330 and an estimated yearly operating cost of $14. The other has a purchase price of $369 and an estimated yearly operating cost of $9. Which TV should the Gordons buy if they plan to keep it for 8 years I dont know how to do this. Help me please Journalize the following transactions using the direct write-off method of accounting for uncollectible receivables. April. 1 Sold merchandise on account to Jim Dobbs, $7,200. The cost of goods sold is $5,400. June 10 Received payment for one-third of the receivable from Jim Dobbs and wrote off the remainder. Oct. 11 Reinstated the account of Jim Dobbs and received cash in full payment. Subject: Forensic science How can investigators increase a DNA sample? ASAPPPP HELPPPP PLEASEEEE How many minutes does it take for the goose to fly 1 mile if it takes 6 minutes to fly 18 miles Mr. Jenson's class is observing the growth of one kind of pea plant. The class wants to design an experiment to answer the question, "What amount of water will cause the plants to produce the greatest number of peas?"What could the class do to create the experiment? A. give all the pea plants the same amount of water and count the number of peas that the plants produce B. give all the pea plants different amounts of water and only guess the number of peas that the plants produce C. give all of the pea plants different amounts of water and count the number of peas that the plants produce D. stop watering all of the pea plants and then count the number of peas that the plants produce Please answer this question step by step!No links please.Whoever gives correct answer will get a thank you aswell. HELP!!! WILL GIVE MAX POINTS!! Doing a Lab Report on Natural Selection about beans. For example 20 dark red beans and 35 light red beans (kidney beans) Sample Response: When the volcano erupted, the dark red walking beans were easier to see. Thus, more dark red beans were eaten during days four, five, and six. If the pollution continued, there would be fewer and fewer dark red walking beans over time.Questions being asked are:1. What is the purpose of the lab?2. What is your hypothesis for this experiment?3. What methods are you using to test this hypothesis? (Outline the steps of the procedure in full sentences.)4. 4. What graphs would clearly represent the trends in your data?Your Student Guide includes information on which graphs to construct. Each graph should have the following items:a. An appropriate titleb. Appropriate labels for each axisc. An appropriate scale for each axisd. The correct units for the dataComplete a rough sketch of each graph.5. What do the data in your graphs tell you? (Explain in one or two sentences what trend is shown in each of your graphs.)6. What does the data tell you about your hypothesis? (State how your hypothesis is either supported OR refuted by the data)7. How does the data support your claim above? (Explain your statement above. Be sure to refer to specific pieces of data from your experiment that supports your argument)8. 8. If you could repeat the experiment and make it better, what would you do differently and why?There are always ways that experiments can be improved. Now that you are a veteran of this experiment and have experience with the procedure, offer some advice to the next scientist about what you suggest and why. Can someone explain and answer this question please... I'm very unsure. please and thankyou 5x+2y=6 3y=2x+9 how many solutions does this problem have? No solution, one solution, or infinite solutions Pls help will give brainly