Answer:
convert units --> PV=nRT --> PV/RT=n --> moles to molecules.
(0.993atm*2.00L)/(0.08206*296.15K)=0.08176 mol N2
0.08176 mol*(6.022x10^23 molecules/1 mol)=4.92x10^22 molecules N2
Explanation:
Which animal is a vertebrate
Fish
crab
shrimp
octopus
Answer:
fish
Explanation:
vertebrate is an animal with a spinal cord surrounded by cartilage or bone ,so example of a vertebrate is fish
A motor boat is traveling 10 m/s on a sunny calm day. The driver turns
off the engine. Apply Newton's first law to explain what happens to the
boat as it glides through the water. *
Answer:
If there is no resistance, current, wind, or friction on the boat, the boat would keep moving in the same direction at the same speed.
Explanation:
Newton's First Law of Motion suggests that if no external force acts upon an object, that object would continue moving in the same direction at the initial speed.
However, all objects near the surface of the earth (including the boat in this question) experience the effect of gravitational pull (an external force from the earth.) Because of these external forces, Newton's First Law of motion (when phrased in this way) would not apply to the boat.
It is frequently possible to use a more general version of this statement: if the net force on an object is zero, that object would continue moving in the same direction at the initial speed.
In other words, the object would move in the same direction at the initial speed as long as all the external forces on that object balance each other.
Assume that there is no resistance, current, wind, or friction on the boat. After the engine of the boat is turned off, the following would be the forces on this boat:
downward gravitational attraction from the earth, andupward buoyancy from the water, which counteracts the gravitational attraction on the boat.If the water is sufficiently calm, these two forces would balance one another. The external force on this boat would be zero. Hence, the boat would keep moving in the same direction at the same speed.
Which is not synthetic polymer?
a) Teflon
b) PVC
c) Chitin
Every day Sam goes to Dunkin' Donuts and orders a medium iced Coffee with four sugars OR he orders a hot
coffee with four sugars.
He notices that the iced coffee is never as sweet as the hot coffee. Why is this? Use complete sentences and
unit vocabulary to explain.
Which part of an atom has a neutral or no charge?
Answer:
Neutron
Explanation:
Neutrons has a neutral or no charge.
if a runner decreases his velocity from +20 m/s to +10 m/s what is his average acceleration
Answer:
f a runner decreases his velocity from +20 m/s to +10 m/s, with average acceleration is -5m/s².
Explanation:
Why are the relative and absolute ages of fossils important to scientists?
Answer Geologists generally know the age of a rock by determining the age of the group of rocks, or formation, that it is found in. ... Relative dating places events or rocks in their chronologic sequence or order of occurrence. Absolute dating places events or rocks at a specific time.: Relative dating is used to determine a fossils approximate age by comparing it to similar rocks and fossils of known ages. Absolute dating is used to determine a precise age of a fossil by using radiometric dating to measure the decay of isotopes, either within the fossil or more often the rocks associated with it.With absolute age dating, scientists determine the absolute age of a rock in millions of years before present rather than just the age of the rock relative to the rock units around it. This information helps geologists develop more precise geological history models for the rocks and regions they study.
hope this helps u have a nice night❤️
Explanation:
What is a homologous structure that humans share with other vertebrates when they are fully grown?
hair
gills
spine
tail
Answer:
spine
Explanation:
17.5 mL of 0.1000M NaOH was required to neutralize 25.0 mL of HCl. What was the molarity of the HCl?
Answer: The molarity of [tex]HCl[/tex] is 0.07 M
Explanation:
According to the neutralization law,
[tex]n_1M_1V_1=n_2M_2V_2[/tex]
where,
[tex]n_1[/tex] = basicity [tex]HCl[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]HCl[/tex] solution = ?
[tex]V_1[/tex] = volume of [tex]HCl[/tex] solution = 25.0 ml
[tex]n_2[/tex] = acidity of [tex]NaOH[/tex] = 1
[tex]M_1[/tex] = molarity of [tex]NaOH[/tex] solution = 0.1000 M
[tex]V_1[/tex] = volume of [tex]NaOH[/tex] solution = 17.5 ml
Putting in the values we get:
[tex]1\times M_1\times 25.0=1\times 0.1000\times 17.5[/tex]
[tex]M_1=0.07M[/tex]
Therefore, molarity of [tex]HCl[/tex] is 0.07 M
Describe technologies used to explore the universe using electromagnetic radiation.
Answer:
Electromagnetic spectrum
Explanation:
Telescopes are used by observers to monitor various electromagnetic radiation. Only one component of the visible radiation can be observed by each type of instrument. Telescopes, ultraviolet telescopes, optical celestial objects, and other types of telescopes are available.
For the titration of 50.0 mL of .020M HI with 0.015 M of NaOH, graph pH versus milliliters of base added from 0-100 mL. How many milliliters of NaOH are added at the equivalence point?
Answer:
[tex]V_{base}=66.7mL[/tex]
Explanation:
Hello there!
In this case, since the neutralization reaction between HI and NaOH is:
[tex]NaOH+HI\rightarrow NaI+H_2O[/tex]
Thus, as there is a 1:1 mole ratio of base to acid, it is possible to use the following mole equivalence:
[tex]n_{base}=n_{acid}\\\\M_{base}V_{base}=M_{acid}V_{acid}[/tex]
Thus, by solving for the volume of base, we obtain:
[tex]V_{base}=\frac{M_{acid}V_{acid}}{M_{base}}[/tex]
Therefore, we plug in the given data to obtain:
[tex]V_{base}=\frac{0.020M*50.0mL}{0.015M}\\\\ V_{base}=66.7mL[/tex]
Best regards!
What differences would you expect if, at the same time, you place yellow and blue food coloring in both HOT and COLD water?
Answer:
The food coloring in the hot water will most likely spread faster than the one in the cold in which can result in it turning green rather than the coloring in the cold.
Explanation:
If you put a plant across the room from a window, how will this affect the growth of the plant?
The plant will grow away from the light source.
The plant will grow toward the light source.
The plant will grow faster.
The plant will stop growing,
What are the three major Eras from 600 million years ago to today
Answer:
he Paleozoic, Mesozoic, and Cenozoic.
Explanation:
Compare and contrast the behavior of the food coloring and the floating pieces of paper before and after adding heat to the system. What caused the changes you observed
Answer:
the answer is c
Explanation:
Answer:
Im doing this rn :0, look at explanation ill try to help
Use different words
Have a great day!
pls give brainliest and hit the heart if this helped :3
Explanation:
The changes I observed are that when you do not use hot water, the food coloring stays at the bottom and doesn't spread to the top, but when I do use food coloring, it spreads everywhere in the water. I don't know what caused the changes I observed, but I think its because heating food coloring does something to it to make it spread, maybe hotter liquids spread faster?
How many atoms are in 294 g of copper?
Answer
2.1 x 10 ^23
fdxkjns9fhnuvypdsssssssssz89999qewv
I neeeedddd hhheeelppppppllsssss
Answer:
I believe that it is the 2nd option.
Explanation:
My reasonings are because C4H10O has 7 isomers. In which 4 are alcohol and the other 3 are ether.
The first option is ethers, specifically ethoxyethane.
The third option is ethers, specifically 1-methoxypropane.
The fourth option is an alcohol, specifically 1- butanol.
Therefore, leads us to the 2nd option that it is NOT an isomer of C4H10O
The reaction 2KClO3(s) --> 2KCl(s) + 3O2(g) is a(n)
Group of answer choices
combustion reaction.
ionic reaction.
synthesis reaction.
decomposition reaction.
Answer:
decomposition reaction.
Explanation:
It is a decomposition reaction as potassium chlorate compound breaks to form potassium chloride and oxygen. This reaction requires heat as source of energy to break down the compound so it is endothermic in nature.
A chemist working for Udensi industries wants to create a new ink for tattoos and cosmetics. Determine the theoretical yield of iron (ll) sulfide if the chemist uses 22.5 grams of iron ? Type of rxn : AD , SR, DR , D Type of calculation : mol to mol ; mol to mass ; mass to mols mass to mass Fe S8--> Fes
Answer:
35.36 g
Explanation:
We'll begin by writing the balanced equation for the reaction. This is illustrated below:
8Fe + S₈ —> 8FeS
Next, we shall determine the mass of Fe that reacted and the mass of FeS produced from the balanced equation. This can be obtained as follow:
Molar mass of Fe = 56 g/mol
Mass of Fe from the balanced equation = 8 × 56 = 448 g
Molar mass of FeS = 56 + 32 = 88 g/mol
Mass of FeS from the balanced equation = 8 × 88 = 704 g
SUMMARY:
From the balanced equation above,
448 g of Fe reacted to produce 704 g of FeS.
Finally, we shall determine the theoretical yield of FeS as follow:
From the balanced equation above,
448 g of Fe reacted to produce 704 g of FeS.
Therefore, 22.5 g of Fe will react to produce = (22.5 × 704)/448 = 35.36 g of FeS.
Thus, the theoretical yield of FeS is 35.36 g
understanding coefficients
Answer:
Mg-9
N-6
C-2
O-4
Ca-9
P-6
O-24
Explanation:
i need halp with this one
Pangea was formed in the Paleozoic Era
"What is the potential energy relative to the water surface of a diver at the top of a 26 m
high diving platform? Suppose she has a mass of 35 kilograms."
Answer:
PE = 8918 J
Explanation:
Formula for potential energy here is;
PE = mgh
Where;
m is mass
g is acceleration due to gravity
h is height
We are given;
m = 35 kg
h = 26 m
Thus;
PE = 35 × 9.8 × 26
PE = 8918 J
8. FOR BRAINLIST!!!
Genetic variation describes naturally occurring differences among individuals within
the same population or species. It is based on the differences in the alleles in the
gene pool in a population. These differences--
I think it's either b or c
How many moles of CO2 are produced
when 10.0 moles of C3H8 are burned in
excess oxygen?
C3H8 + 5 O2 ---> 3 CO2 + 4H2O
Answer:
30.0 mol CO₂
Explanation:
C₃H₈ + 5O₂ → 3CO₂ + 4H₂O
To answer this problem we need to convert moles of C₃H₈ into moles of CO₂: We'll do that by using the stoichiometric coefficients, using a conversion factor that has C₃H₈ moles in the denominator and CO₂ moles in the numerator:
10.0 mol C₃H₈ * [tex]\frac{3molCO_2}{1molC_3H_8}[/tex] = 30.0 mol CO₂
What is the concentration of chlorine in ppm, in a 2.0L sample of pool water that contains 5.2mg of chlorine. How do I do this problem
Answer: 2.6 ppm
Explanation: ppm is parts per million, also 1:1000 000.
It means 1 mg in 1000 000 mg is same as 1 mg in 1000 g
Assume 2.0 litres weighs 2.0 kg = 2000 g
In one litre there is 2.6 mg Cl. You get a proportion 2.6 mg :1000 g
The concentration of chlorine is 2.6 ppm.
What is concentration?Concentration can be calculated in terms of Parts per million, or ppm, that is a measurement of dissolved solids in solution expressed as a ratio of the count of parts of solids/solute to one million parts of total volume.
The concentration can be calculated by using the formula:
C = m / v
where, C is concentration, m is mass and v is volume.
Calculation of concentration is shown as:
By using the formula, C = m / v
Put the values of m = 5.2 mg and v = 2 L in concentration formula.
C = 5.2 mg / 2 L
C = 2.6 ppm
Therefore, the concentration of solution will be 2.6 ppm.
To know more about concentration click here.
https://brainly.com/question/10725862.
#SPJ2
is lion decomposer consumer or a producer ?
The asthenosphere flows because of
how many atoms are in 4.90 mol of Al2O3
Answer:
12 g of 12C to three significant figures maybe?
Explanation:
tell if correct or not im sorry fi it isnt :c
Identify the group number in the periodic table of X, a representative element, in each of the following ionic compounds:
Al2X3
XCO3
and an explanation on how you did it. I want to understand how to do this in the future :')
In the formation of ionic compound, atoms of different elements that have obtained a nonneutral electrical charge (either due to losing or gaining electrons, creating a charge imbalance between the negatively-charged electrons and the positively-charged protons) are attracted in such a way that their interaction would result in electrical neutrality. Group 4A elements (the "carbon group") are a sort of dividing line: Elements in groups to the left of group 4A (the metallic elements) tend to have atoms that lose electrons during ionization, thus becoming more positive; elements in groups to the right of group 4A (the nonmetallic elements) tend to have atoms that gain electrons during ionization, thus becoming more negative. This is, of course, a broad generalization, but it should suffice in helping to get a big-picture idea of how to approach binary ionic compounds such as Al2X3.
Al, or aluminum, is a metallic element in group 3A, which is to the left of group 4A. A neutral aluminum atom has three valence electrons in its outermost shell. When an aluminum atom loses these three valence electrons (thus gaining a stable, noble gas electron configuration), it becomes a positively-charged aluminum ion, Al³⁺.
Now, let's consider how this aluminum cation (a positively-charged ion) could interact with anions (negatively-charged ions) to form an electrically-neutral compound. The most straightforward interaction would be an ionic bond between Al³⁺ and X³⁻. Why? Because the charges between the one Al³⁺ cation and the one X³⁻ anion are opposite and equal in magnitude; they would thus bond in a 1:1 unit ratio to form an ionic compound with the formula AlX.
But that's not what we have here! In our ionic compound, the Al has a subscript of 2, and the X has a subscript of 3. Here's the trick with ionic compounds: Assuming that our subscripts are all simplified to the lowest whole number, an ion's charge is equivalent in magnitude to the counterion's subscript (the counterion is simply the oppositely-charged ion in a binary ionic compound). The sign of the charge will be positive for the metal ion (which conventionally comes first in the formula unit) and negative for the nonmetal ion. The subscript of X is 3 in Al₂X₃, so the charge number on the Al ion is 3. Al, a metal, forms a positively-charged ion; thus, the Al ion has a 3+ charge.
Let's do the same for X. Al has a subscript of 2, so when the X atom ionizes, its charge must have a number of 2 and be negative, i.e., a 2- charge. Conveniently, the charge on an ion of a main-group and non-transition metal element tells us which group that ion's element is in. That's because the group number of elements in the s- and p-blocks is equal to the number of valence electrons in a neutral atom in that group. A group 1A element's atom has one valence electron; a group 2A element's atom has two valence electrons; and a group 3A element's atom (like an Al atom) has three valence electrons; and so forth.
An ion gains or loses electrons so that its outermost (valence) shell is completely filled. If element X's ion exists in the X²⁻ state, then that means it takes the addition of two electrons to give the X atom a full octet (eight electrons in the valence shell). We can then conclude that a neutral atom of X must have six valence electrons since 8 - 2 = 6. Thus, X is an element in group 6A (or group 16 on the extended periodic table), the chalcogens or "oxygen family."
Indeed, the most common form of the compound aluminum oxide has the formula Al₂O₃. Aluminum also forms an ionic compound with sulfur—another group 6A element—which has the formula Al₂S₃.
---
For XCO3, we must keep in mind that CO₃ as a whole is the counterion to X. The 3 is not the subscript for the CO₃ ion. CO₃, or carbonate, has a 2- charge: it can be written as (CO₃)²⁻. Here, the CO₃ ion as a group has no subscript, which might lead one to think that X must be an element from group 1A. Not so fast! It's critical to know beforehand that the carbonate ion has a 2- charge; if X were indeed a group 1A element, X would have a subscript of 2. But X has no subscript (a subscript of 1). Since the subscripts of ionic compounds are simplified to their lowest whole number ratios, that means that X must have a subscript of 2. Only then would both the subscripts of X and CO₃ be simplified to 1, as we have here. If CO₃ has a subscript of 2, that means that X is an element in group 2A (or group 2), the alkaline earth metals.
Indeed, the group 2A elemental ions magnesium (Mg²⁺) and calcium (Ca²⁺) both ionically bond with the carbonate ion to form magnesium carbonate and calcium carbonate, respectively; their respective formulae are MgCO3 and CaCO3, the same form as XCO3.
1
er
al he
is
I Using the Periodic table, which element
Is at an each pair
is more electro gregatire
u si, o 6.H. C w cl Br dJ - SP
lortu
Answer:
wrong
Explanation:
7isjsjosnjzisjjs6shjsmmjdjJenbzh t d grind tudbbsh8s h. rurmkr8wyhrkwijr