Answer:
9.643×10^-4 mole is your answer
Explanation:
56 g of iron =1 mole
0.054 g of iron =1×0.054/56=9.643×10^-4 mole
How is a calorimeter used in this experiment different from the ones used to find the energy content of a snack
Answer:
Kindly check the explanation section.
Explanation:
PS: Note that enough information are not being provided and we do not know the experiment this question is all about. However, some information are provided below which is going to aid in solving when you get access to the main question.
The determination of the heat transferred from one substance to another is one of the important aspect in science. The method in which this heat is being measured is known as calorimetry and the instrument used in this technique is known as the calorimeter.
When the energy content of a snack is needed to be calculated, there is the need use a type of instrument known as bomb calorimeter.
Most of the calorimeters used by students are not so expensive like the used in the industries. Most of these calorimeters operates at a constant pressure while the Bomb Calorimeter operates at constant volume.
what is the pH when h+=0.045 M?
Answer:
pH≈1.35
Explanation:
-log(0.045)≈1.35
Oleic acid's melting point is 14°C and it's boiling point is 360°С. What phase is this substance
at room temperature 25°C?*
A. Solid
B. Liquid
C. Gas
D. Impossible to tell
. Chalk is made of CaCO 3 . How many molecules are in 5 grams of chalk?
Answer:
20.02 grams of chalk.
Explanation:
25.2 g of CuSO4 6H20 (mm: 267.72 g/mol) is dissolved in 28.0 mL of water, calculate the molarity.
Answer:
3.36 M
Explanation:
Step 1: Given data
Mass of CuSO₄.6H₂O (m): 25.2 gMolar mass of CuSO₄.6H₂O (M): 267.72 g/molVolume of solution (V): 28.0 mL (we will assume it is equal to the volume of water)Step 2: Calculate the moles (n) of CuSO₄.6H₂O (solute)
We will use the following expression.
n = m/M
n = 25.2 g / (267.72 g/mol) = 0.0941 mol
Step 3: Calculate the molarity
Molarity is equal to the moles of solute divided by the liters of solution.
M = 0.0941 mol/0.0280 L = 3.36 M
How could a scientist use a sedimentary rock to provide evidence that the right k cycle is a valid scientific model
Answer:
By closely observing the sedimentary rock and the presence of organic materials and mineral grains in sedimentary rocks
Explanation:
The rock cycle explains how the three types of rock are formed over time from each other.
To use a sedimentary rock to prove that the rock cycle is a valid scientific model is by, closely observing the sedimentary rock. when the sedimentary rock is closed observed the principle of superposition will be seen ( i.e. younger segments deposited on top ), the presence of organic materials and mineral grains that can be found in Igneous or Metamorphic rocks can also be seen and this shows that Sedimentary rocks pass through the rock cycle. hence this proves that the rock cycle is a valid scientific model overtime
Two tons of water is pumped into a tank 15 ft. High in 5 minutes. Determine the power output of the pump. (Note: One ton is equal to 2,000 lb. And remember to convert the minutes to seconds.)
Answer:
200 lb•ft/s
Explanation:
From the question given above, the following data were obtained:
Force (F) = 2 tons
Time (t) = 5 mins
Height (h) = 15 ft
Power (P) =?
Next, we shall convert 2 tons to pound. This can be obtained as follow:
1 ton = 2000 lb
Therefore,
2 tons = 2 × 2000
2 tons = 4000 lb
Next, we shall convert 5 mins to seconds. This can be obtained as follow:
1 min = 60 s
Therefore,
5 mins = 5 × 60
5 mins = 300 s
Finally, we shall determine the power of the pump. This can be obtained as follow:
Force (F) = 4000 lb
Time (t) = 300 s
Height (h) = 15 ft
Power (P) =?
P = F × h / t
P = 4000 × 15 / 300
P = 60000 / 300
P = 200 lb•ft/s
Thus, the power of the pump is 200 lb•ft/s
Answer:
It's 200 ft-lb/sec
Explanation:
I did it before!
What is the percent composition (by mass) of MgBr2?
Answer:
13.2% Mg, 86.8% Br
Explanation:
Mg has a molar mass of 24.31g/mol.
Bromine has a molar mass of 79.90 g/mol.
There is one mole of Mg and two moles of Br in the compound:
79.90x2 + 24.31 = 184.11
So the total molar mass of MgBr2 is 184.11.
A percent tells us a part of a whole, so we will divide each part of the mass into the whole mass.
24.31g Mg / 184.11g MgBr2 = .132
159.8g Br / 184.11g MgBr2 = .868
Multiply these decimals by 100 to make them into a percent.
.132 x 100 = 13.2% Mg
.868 x 100 = 86.8% Br
6.
Ammonia (NH3) acts as a weak base in aqueous solution. What is the acid that reacts with this base
when ammonia is dissolved in water?
(A) NHA
(B) H2O
(C) Oxygen, which is always dissolved in water
(D) None of the above, there are no acids in pure water
Answer:
90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on eight comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you.!Explanation:
Ammonia acts as a weak base in aqueous solution. Water is the acid that reacts with this base when ammonia is dissolved in water.
What is a base?According to the Arrhenius concept, base is defined as a substance which yields hydroxyl ions on dissociation.These ions react with the hydrogen ions of acids to produce salt in an acid-base reaction.
Bases have a pH higher than seven as they yield hydroxyl ions on dissociation.They are soapy in touch and have a bitter taste.According to the Lowry-Bronsted concept, base is defined as a substance which accepts protons .Base react violently with acids to produce salts .Aqueous solutions of bases can be used to conduct electricity .They can also be used as indicators in acid-base titrations.
They are used in the manufacture of soaps,paper, bleaching powder.Calcium hydroxide ,a base is used to clean sulfur dioxide gas while magnesium hydroxide can be used as an antacid to cure acidity.
Learn more about base,here:
https://brainly.com/question/12445440
#SPJ6
If you had 14.5 moles of gold, how many atoms would you expect to have?
Answer:
(14.5 mol) x (6.022 x 10^23 atoms/mol) = 8.73 × 10^24 atoms
Explanation:
pls mark brainliest
Definition of fluid friction
Answer:
Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other
Hope it helps
Please mark me as the brainliest
Thank you
More bushes of potatoes will be produced if the soil is fertilized more WHAT IS THE INDEPENDENT VAIRABLE AND THE DEPENDENT VARIABLE
Answer:
The dependent variable is the bushes of potatoes while the soil is an independent variable.
Explanation:
An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).
This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.
Cause and effect can be defined as the relationship between two things or events in which an occurrence one (cause) leads to the occurrence of another (effect).
In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated.
Hence, the dependent variable is the bushes of potatoes while the soil is an independent variable.
When one element replaces another element the reaction is known as a _ replacement reaction
Answer:
Single replacement reaction
Explanation:
A single replacement reaction, sometimes called a single displacement reaction, is a reaction in which one element is substituted for another element in a compound.
19) Which one of the following statements describes a chemical property of hydrogen gas?
A) Hydrogen gas has a density of 0.00009 g/cm’ at STP.
B) Hydrogen gas burns in air.
C) Hydrogen gas has a boiling point of 20. K at standard pressure.
D) Hydrogen gas is colorless.
A student asks why the ashes from a fire have much lower mass than the wood that was burned. Which of the following is the correct answer to the student's question?
Answer:
It have lower mass because much of the ashes came from the burned wood. (ashes were like little parts of the wood). plus most of the fuel was turned in to fire (light and heat energy) so yeah ash is just the left over.
Explanation:
Covert 50oC to k
(I’ll mark you as brainlister)
Answer:
323 K
Explanation:
To convert Celcius to kelvin first you need to remember this equation:
C + 273 = K (K = kelvin and C = celsius)
Next, you substitute with what you have given:
50 + 273 = K
Solve the equation by adding 50 and 273
k = 323
El etanol combustiona con el oxigeno produciendo dióxido de carbono gaseoso y agua: En un proceso se hacen reaccionar 450.2 g de dioxígeno con 998. 2 g de etanol . a) ¿Cuál de los reactivos es el limitante? b) Calcule la masa de dióxido de carbono que se formará c) ¿ Cuanto del reactivo en exceso quedará sin reaccionar?
Answer:
uh oh stinky uh oh stinky
This is agree or disagree I need help ASAP!!
Answer:
disagree
sometimes they attract
Explanation:
Answer:
Explanation:
2. Agree
3. Agree
4. Agree
5. agree
6. disagree
If im wrong its because im tired lol
help please see attached file
Answer:
balanced equation of glucose
6CO2 + 6H2O----------C6H12O6 + 6O2
in the presence of sun light.
helllllppppppp pleaseeeeeee
Which body system includes the lungs?m
Answer: The respiratory system
Explanation: It includes the nose, mouth, throat, voice box, windpipe, and lungs. Air enters the respiratory system through the nose or the mouth.
When converting from grams to the must be used as a conversion factor
1. When _____
are added or removed from an atom, _____
is formed
Answer:
1.) protons or electrons 2.) ion
Explanation:
Choose the correct name for each acid. Click here
to access the common polyatomic ion sheet.
HNO2:
DONE
HI:
DONE
H3PO4 :
DONE
The correct name of HNO₂, HI and of H₃PO₄ is nitrous acid, hydroiodic acid and phosphoric acid respectively.
What are acids?Acids are those substances in which carboxylic acid (-COOH) is present and pH value of acids falls in the range of 0 to 6.9.
Name of the HNO₂ compound is nitrous acid, of HI is hydroiodic acid and of H₃PO₄ is phosphoric acid.
Hence name of the HNO₂, HI and of H₃PO₄ is nitrous acid, hydroiodic acid and phosphoric acid respectively.
To know more about acids, visit the below link:
https://brainly.com/question/24375075
#SPJ2
Answer: HNO2 nitrours acid
HI Hydroiodic acid
H3PO4 phosphoric acid
Explanation: edu
Gold can be pounded out to make a foil only a few atoms thick because of
A. Metallic Bonds
B. Ionic Bonds
C. Valence Bonds
D. Covalent Bonds
Answer:
A. Metallic Bonds
Explanation:
Metallic bonding is a type of chemical bonding that arises from the electrostatic attractive force between conduction electrons and positively charged metal ions.
What number is pointing to the area where magma is less dense due to
heat?
Answer:
I think it's 2
Explanation:
The magma gets so hot, it floats up before cooling and sinking again
HELP!! 30 POINTS!!!! What does the energy graph look like for this reaction??
C3H8+5O2 -> 3CO2+4H2O
I have the data, I just need to know how to make the graph, please!!
total enthalpy of reactants= -103.85
total enthalpy of products= =-2147.81
=-2043.96 kJ/mol exothermic reaction
Answer:
Bottle Nose Dolphin ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
Colin decided to investigate soil erosion by water. He measured rates of erosion on
model hills made of soil, rock, and sand. Which of the following was the test
(independent) variable?
Answer:
i just had a test on this with 2 attempts and got it wrong on both but i do know that the answer is not...
the steepness of the models hillside
or
the rate of erosion on the hills
so the answer is either...
the amount of water sprayed on the hills
or
the type of material used to construct the model hills
but i think its the amount of water sprayed on the hills...i hope i helped a lil ;)
Explanation:
You are melting a chocolate and accidentally have the stove up to high. the chocolate starts to burn on the bottom of your pot. Physical or Chemical Change?
Answer:
it is a chemical change because it can't be change back to it normal position when it gets burnt
Ohio Achievement Test Coach Science, Grade 5
10. Bob first blows whistle hard. Then he blows the same whistle gently. What
changed when Bob blew the whistle the second time?
POSTTEST
A pitch
B. volume
C. pitch and volume
D. frequency