Answer:
2.278522944610426
Explanation:
What will increased temperature in a reaction cause
1 Particles in a reaction to move more slowly
2 Particles in a reaction to move faster
3 Particles in a reaction to generate more electrical ions
4 Particles in a reaction to lose more electrical ions
Write balanced net ionic equations for the three reactions carried out in Part A given that the sulfur-containing product is the S2O3
Answer:
Please find the complete question in the attached file.
Explanation:
Balanced equation: [tex]8KMnO_4+14NaOH +Na_2S_2O_3 \longrightarrow 8Na_2MnO_4 +2K_2SO_4 +5H_2O +4KOH[/tex]
Ionic equation:
[tex]8K^{+} + 8MnO_4^{-}+14Na^{+}+ 14OH^- +2Na^+ S_2O_3^{-}\longrightarrow16Na^+8MnO_4^- +4K^+ + 2SO_4 +5H_2O+4K^+ +4OH^-[/tex]
Net Ionic equation:
[tex]10 OH^- +S_2O_3^- \longrightarrow 2SO_4^- +5H_2O[/tex]
What is the ratio of the volume of oxygen gas to the
volume of water vapor in the following reaction?
Answer:
The ratio of volumes in the given case illustrates the Gay Lussac's Law of Gaseous Volumes.
- The law was given by the french chemist Gay Lussac in the year 1806.
- He stated that when gases are combined or are produced in a chemical reaction, they do so in a simple ratio by volume.
- It is given that 2 volumes of hydrogen combine with 1 volume of oxygen producing 2 volumes of water.
- This is in accordance with this law.
Explanation:
Can You please solve the question b in the photo. Will give branliest.
Answer:
Br₂ + 2e⁻ ⇄ 2Br⁻ Half reaction of reduction
2I⁻ ⇄ 2e⁻ + I₂ Half reaction of oxidation
Br₂ + 2I⁻ + 2K⁺ ⇄ I₂ + 2Br⁻ + 2K⁺
Explanation:
This is an easy redox reaction:
Br₂ + 2KI → I₂ + 2KBr
We determine the oxidation states.
0 for the elements at ground state.
K does not change the oxidation state during the reaction.
Bromine is reduced to bromide (oxidation state decreases)
and iodide is oxidized to Iodine (oxidation state increases)
Br₂ + 2e⁻ ⇄ 2Br⁻ Half reaction of reduction
2I⁻ ⇄ 2e⁻ + I₂ Half reaction of oxidation
In oxidation, electrons are released while in reduction, the electrons are gained. To make the ionic equation, we just add K⁺
So we sum both reactions
Br₂ + 2e⁻ + 2I⁻ + 2K⁺ ⇄ 2e⁻ + I₂ + 2Br⁻ + 2K⁺
We cancel the electrons on both sides of the equation:
Br₂ + 2I⁻ + 2K⁺ ⇄ I₂ + 2Br⁻ + 2K⁺
a gas has a pressure of 0.470 atm at 60.0 C. What is the pressure at standard temperature?
Answer:
P2=0.385atm
Explanation:
step one:
Given that the temperature T1= 60 Celcius
we can convert this to kelvin by adding 273k to 60 Celcius
we have T1= 333k
pressure P1= 0.470 atm
step two:
we know that the standard temperature is T2= 273K
Applying the temperature and pressure relationship we have
P1/T1=P2/T2
substituting our given data we have
0.47/333=P2/273
cross multiply we have
P2= (0.47*273)/333
P2= 128.31/333
P2=0.385 atm
URGENT PLEASE HELP! Given 3.4 grams of x element with a molar mass of 24 g/mol and 4.2 grams of y element with a molar mass of 35 g/mol. How much of compound xy2 can be generated?
x + 2y -> xy2
4.4 g XY
I'm not sure but that's the closest I can get or try
A piece of copper has a density of 8.96 g/cm3, what is the volume of a 4.2 g piece?
Answer:
0.47 cm³
Explanation:
[tex]Volume=Mass/Density\\[/tex]
Plug in the mass (4.2 grams) and the density (8.96 g/cm³)
[tex]Volume=4.2/8.96\\Volume=0.47[/tex]
Therefore, the volume of a 4.2 g piece of copper is approximately 0.47 cm³.
I hope this helps!
What is a synonym for smart or intelligent cause i cant use either
Answer:
sharp clever bright
Explanation:
s
Answer:
will you friend me please
The mass of a water balloon is 2 kilograms. The speed that the water ballon is traveling when it hits the ground is 20 meters/second.
What is the total kinetic energy of a water balling that hits the ground after it is dropped from a balcony ?
Answer:
400 Joules
Explanation:
From the question,
The total kinetic energy of the water balling when hits the ground is given as
K.E = 1/2mv².................. Equation 1
Where K.E = Kinetic Energy of water ballon, m = mass of water balloon, v = velocity of water ballon
Given: m = 2 kilograms, v = 20 meters/second.
Substitute these values into equation 1
K.E = (2×20²)/2
K.E = 2×400/2
K.E = 400 Joules
What is the difference between 13.254 m/s and 7.7 m/s? Round your answer to the correct number of significant digits.
Answer:
5.6 m/s
Explanation:
Given,
First number = 13.254 m/s
Second number = 7.7 m/s
We need to find the difference between these two numbers. First we round off 13.254 to one decimal place i.e. 13.254 = 13.3 m/s
The difference between them is given by :
D = 13.3 - 7.7
= 5.6 m/s
Hence, the difference of the two numbers is 5.6 m/s.
Calculate the molar mass of PbSo3
Answer:
Lead sulfite is the inorganic compound with the formula PbSo3 or O3PbS.
Explanation:
1) ____C3H8 + ____O2 → ____CO2 + ____H2O
Consider a iron-silver voltaic cell that is constructed such that one half-cell consists of the iron, Fe, electrode immersed in a Fe(NO3)3 solution, and the other half-cell consists of the silver, Ag, electrode immersed in a AgNO3 solution. The two electrodes are connected by a copper wire. The Fe electrode acts as the anode, and the Ag electrode acts as the cathode. To maintain electric neutrality, you add a KNO3 salt bridge separating the two half-cells. Use this information to solve Parts B, C, and D. Part B The half-cell is a chamber in the voltaic cell where one half-cell is the site of the oxidation reaction and the other half-cell is the site of the reduction reaction. Type the half-cell reaction that takes place at the anode for the iron-silver voltaic cell. Indicate the physical states of atoms and ions using the abbreviation (s), (l), or (g) for solid, liquid, or gas, respectively. Use (aq) for an aqueous solution. Do not include phases for electrons. Express your answer as a chemical equation.
Answer:
See explanation
Explanation:
In the voltaic cell, energy is produced by spontaneous chemical reaction. One half cell functions as the anode (in this case it is the Fe/Fe^2+ half cell) while the other half cell functions as the cathode (in this case it is the the Ag/Ag^+ half cell).
At the anode;
Fe(s) -----> Fe^2+(aq) + 2e
At the anode;
2Ag^+(aq) + 2e ------> 2 Ag(s)
Overall cell equation;
Fe(s) + 2Ag^+(aq) ------> Fe^2+(aq) + 2 Ag(s)
What will increase the strength of an electromagnet?
A. Adding more loops to the wire
B. Wrapping the wire around a piece of paper
C. Turning the current down
D. Having fewer coils
B. Wrapping the wire around a piece of paper
what causes ignition
Answer:
An ignition coil can fail due to a high voltage puncture of its body, or an open primary or secondary winding. A few are killed by overheating when the control side of the primary side develops a short to ground. Something as simple as badly worn spark plugs will increase the demand from the coil, and eventually lead to failure.
But if I were to discuss the current leading cause of ignition coil replacement, I would have to say misdiagnosis and bad internet information. This is especially true of modern “coil on plug” systems. Often, the actual coil is fine, and the only damage is the replaceable spark plug boot.
I've seen countless examples of online “advice” to start with replacing all spark plugs and coils at the suggestion of any power loss or hiccup. Then the car owner purchases the cheapest set of coils that they can find. Not only is the initial problem still present , but they likely WILL have a future misfire due to poor quality parts selection. All misfires are not caused by coils and spark plugs.
Explanation:
Express the Following number in scientific notation with 3 significant figures:
450,000
[ ? ] x 10 to the power of ?
Answer:
4.50x10^5
Explanation:
dont forget the zero on the 4.50
How many lone pairs are on the central atom of a molecule of RnCl4?
A. 0
B. 2
C. 3
D. 1
Solution A has a pH of 3, and solution B has a pH of 5. Which statement best
describes these solutions?
A. Solution A is acidic, and solution B is basic.
B. Solution A is basic, and solution B is acidic.
C. Solution B is less acidic than solution A.
O D. Solution B is more acidic than solution A.
Answer:
C. Solution B is less acidic than solution A.
What is the pH of a solution that has a hydrogen ion concentration of 6.9*10^-4?
The pH would be 3.16 because the formula for finding the pH from a H± ion is pH = -log [H±]
So with that formula, you first have to substitute the H± with your numbers which in this case is 6.9 × 10^-4.
It should like this:
pH = -log (6.9 × 10^-4)
And lastly, just calculate.
pH = 3.16
Hope that helps, do let me know if you need more help in understanding this!
Calculate the pH and pOH of a solution of sodium hypoiodite NaOI, with a formal concentration of 0.05784 mol L-1. Note that the compound is soluble, dissolves into sodium and hypoiodite ions, and these react with water. The p K a of hypoiodous acid at 298 K is 10.64. Calculate the pH and the pOH of the resulting solution. Use all the approximations you can, be sure to verify them.
Answer:
pH = 11.70
pOH = 2.298
Explanation:
As we know
NaOI + H2O NaOH + HOI
pH = 7 + ½ (pKa + log (HOI))
Substituting the given values, we get –
pH = 7 + ½ (10.64 + log (0. 0.05784))
pH = 7 + ½ (10.64 -1.2377)
pH = 11.70
pOH = 14 – pH
pOH = 14 -11.70
pOH = 2.298
Bob measured out 1.60 grams of sodium. He calculates that 1.60 g of
sodium should produce 4.07 g of NaCl. In his lab, he only makes 3.45 g.
What is his percent yield?
Answer:
84.8%
Explanation:
Step 1: Given data
Bob measured out 1.60 g of Na. He forms NaCl according to the following equation.
Na + 1/2 Cl₂ ⇒ NaCl
According to this equation, he calculates that 1.60 g of sodium should produce 4.07 g of NaCl, which is the theoretical yield. However, he carries out the experiment and only makes 3.45 g of NaCl, which is the real yield.
Step 2: Calculate the percent yield.
We will use the following expression.
%yield = real yield / theoretical yield × 100%
%yield = 3.45 g / 4.07 g × 100% = 84.8%
. Elements in the Periodic Table are arranged according to increasing numbers of _____________, which is called the ___________ ______________ on an element key.
Answer:. Elements in the Periodic Table are arranged according to increasing numbers of ______atoms_______, which is called the ______atomic _____ _______number_______ on an element key.
Explanation: I just learned about this at school!! ; )
Draw the atomic structure with electronic configuration of Potassium
Answer:
Explanation:
i try to help you
✧Kindly see the attached picture! ☄
♪ Hope I helped! ♡
[tex] \star[/tex] Best regards! ツ
☞ [tex] \underbrace{ \overbrace{ \mathfrak{Carry \: On \: Learning}}}[/tex] ✎
4 methyl 2 pentanone structural formula
Answer:
(CH3)2CHCH2COCH3
Explanation:
If a gas is cooled from 343.0 K to 283.15 K and the volume is kept constant what final pressure would result if the original pressure was 760.0 mm HG?
Answer:
627.4 mmHg
Explanation:
From Gay-Lussac law:
[tex] \frac{p1}{t1} = \frac{p2}{t2} [/tex]
p1 = 760 mmHg
t1 = 343 K
t2=283.15 K
[tex]p2 = p1 \times \frac{t2}{t1} [/tex]
[tex]p2 = 760 \times \frac{283.15}{343.0} [/tex]
[tex]p2 = 627.4 \: mmhg[/tex]
If a gas is cooled from 343.0 K to 283.14 K and the volume is kept constant the final pressure would be 627.4 mm Hg if the original pressure was 760.0 mm Hg.
Gay-Lussac's LawGay-Lussac's law states that the pressure of a given mass of gas at a constant volume varies directly with the temperature of the gas. Gay-Lussac's law defined the relationship between pressure and temperature of a gas when kept at a constant volume.
According to the Gay-Lussac's LawP ∝ T (When V = constant)
or, P = kT
or, [tex]\frac{P_1}{T_1} = \frac{P_2}{T_2}[/tex]
Here,
[tex]P_{1}[/tex] = 760.0 mm Hg,
[tex]T_{1}[/tex]= 343.0 K
[tex]T_{2}[/tex] = 283.15 K
Now put the values in above formula, we get
[tex]\frac{P_1}{T_1} = \frac{P_2}{T_2}[/tex]
[tex]\frac{760.0\ \text{mm Hg}}{343.0K} = \frac{P_2}{283.15\ K}[/tex]
[tex]P_{2} = \frac{760.0\ \text{mm Hg} \times 283.15\ K}{343.0\ K}[/tex]
[tex]P_{2} = \frac{215194\ \text{mm Hg}}{343}[/tex]
[tex]P_{2}[/tex] = 627.4 mm Hg
Thus, we can say that if a gas is cooled from 343.0 K to 283.14 K and the volume is kept constant the final pressure would be 627.4 mm Hg if the original pressure was 760.0 mm Hg.
Learn more about Gay-Lussac's Law here: https://brainly.com/question/24691513
#SPJ2
if u mix 10ml of 70%ethanol with 20ml of 80% ethanol with 50ml water what is the concentration of the resulted solution
Answer:
29% is the final concentration
Explanation:
To solve this question we must find the volume of ethanol added and the volume of the whole solution. The concentration will be:
Volume ethanol / Total volume * 100
Volume ethanol:
10mL * 70% = 7mL ethanol
+
20mL * 80% = 16mL ethanol
= 23mL ethanol
Total volume:
10mL + 20mL + 50mL = 80mL
Concentration:
23mL / 80mL * 100
= 29% is the final concentration
what charge does copper have?
Answer: 1+charge
Explanation: hoped this helped:)
In order to determine the magnetic properties of phosphorus atom we need to find out the number of unpaired electrons present in the ground state of phosphorus atom! Select one of the answers below that represents this number.
Group of answer choices
1
4
3
0
2
Answer:
Think of it this way If you have a phosphorus atom whats its oposites once you found that out you may be able to find the answer
Explanation:
Hope this helps :)
During the age of the dinosaurs, most mammals grew no bigger than a?
Answer:
T-rex
Explanation:
How can you tell if an atom has a positive charge? What type of ion is this?
Answer:i love you
Explanation:
Answer: An atom can acquire a positive charge or a negative charge depending on whether the number of electrons in an atom is greater or less then the number of protons in the atom. If the atom has more electrons than protons, it is a negative ion, or ANION. If it has more protons than electrons, it is a positive ion.
Explanation: