Answer:
1 mole = 6.022×10^23 atoms. 1 water molecule = 2 Hydrogen atoms + 1 oxygen atom. So, 1 mole H2O = 1.2044×10^24 hydrogen atoms. Therefore 2 mole H2O will have 2.4088×10^24 hydrogen atoms.
Explanation:
18. If we increase the temperature of the tank to 85° C, what will the new pressure be inside the tank?
The new pressure inside the tank would be approximately 101.8 kPa.
What is the relationship between temperature and pressure of a gas?
According to the ideal gas law, PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature in Kelvin.Since the volume of the tank is constant, we can use the simplified form of the ideal gas law: P1/T1 = P2/T2, where P1 is the initial pressure, T1 is the initial temperature, P2 is the final pressure, and T2 is the final temperature.Converting 85° C to Kelvin (85 + 273.15 = 358.15 K), we can solve for P2: P2 = P1(T2/T1) = 101.3 kPa (358.15 K / 298.15 K) = 101.8 kPa.Increasing the temperature of the tank to 85° C would result in a new pressure inside the tank of approximately 101.8 kPa.
To know more about pressure follow this link:
https://brainly.com/question/24719118
#SPJ1
5. What measures how stressful exercise is on your body?
O A. Frequency
O B. Duration
O C. Volume
D. Intensity
Answer: D. Intensity
Explanation: Intensity is correct, because if you originally were working on a treadmill with a speed of 8, that is how much intensity your putting your body on. And if you put the speed for a treadmill at 11 to increase your exercise, you are increasing the speed you have to run, making it more intense. The more intense you make your workout or training, the more stressful exercise you are doing.
Hope this helps,
:)
cyclohexene and sulfric acid reaction
Cyclohexene and sulfuric acid can react to form a cyclic carbonium ion intermediate, which can then undergo various reactions.
What is the product of the reaction?One common reaction is the addition of a nucleophile, such as water or an alcohol, to form an alcohol product. This reaction is often referred to as acid-catalyzed hydration.
The general reaction mechanism can be summarized as follows:
Protonation of the alkene: The sulfuric acid protonates the alkene double bond, creating a more electrophilic carbocation intermediate.
Formation of a cyclic carbonium ion: The positive charge is then delocalized throughout the cyclohexene ring, forming a cyclic carbonium ion intermediate.
Addition of a nucleophile: A nucleophile, such as water, can then attack the carbon atom of the carbonium ion, forming a new bond and creating an alcohol product.
The overall reaction can be written as follows:
Cyclohexene + H2SO4 + H2O → Cyclohexanol + HSO4-
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
what is sucrose particle type
Answer: Sucrose is a glycosyl glycoside formed by glucose and fructose units joined by an acetal oxygen bridge from hemiacetal of glucose to the hemiketal of the fructose.
Explanation:
Life decision pls help so here’s my problem when I look at the screen for a long time my eye gets like red like strings going to my eye and this happens both two my left and right eye from both sides and one eye is blurry and other is not when I look from fat and something when I look it’s blurry from far with both eyes?
Answer: I would suggest blue light glasses also go to a doctor because your eye veins are bullging and thats making it worse also Im not a doctor so i cant be sure but this is my tip also be careful looking under microscopes or anything with light.
Explanation:
Once alchol is in the bloodstrram it will reach the brain I'm a few
Once alcohol is in the bloodstream it will reach the brain in a few seconds to minutes, depending on various factors such as the amount and concentration of alcohol consumed, body weight, metabolism, and other individual factors.
Alcohol's Effects on BrainAlcohol can swiftly cross the blood-brain barrier after it is ingested, having an impact on the brain and neurological system. Depending on the quantity and frequency of drinking, alcohol's effects on the brain can range from minor disturbances in judgment and coordination to more serious consequences including loss of consciousness and, in the worst circumstances, death.
Long-term changes in brain structure and function, such as cognitive impairment and a higher chance of developing specific neurological and mental illnesses, can also result from chronic alcohol consumption.
Once alcohol is in the bloodstream it will reach the brain in a few seconds to minutes, depending on various factors such as the amount and concentration of alcohol consumed, body weight, metabolism, and other individual factors.
Learn more on effects of alcohol on the body here https://brainly.com/question/6511905
#SPJ1
Which orbital diagram represents lithium
(atomic number = 3)?
Answer:
A.
Explanation:
Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box.
Lithium's electron configuration is 1s^2 and 2s^1 , therefore the orbital diagram would have 2 in 1s box and 1 in 2s box. Thus, option A is correct.
An atom in the neutral state has the same number of protons and electrons. Since protons carry the positive charge and electrons carry negative charge of equal magnitude as that of protons, so, in neutral state the overall charge on the atom is zero.
Atomic number of Lithium is 3. Under neutral state it has 3 protons and 3 electrons. So, its overall electric charge is 0.
If an atom of Lithium loses one of its outermost electron, it is left with 2 electrons and 3 protons. Since, number of protons is 1 more than the number of electrons, the electrical charge on Lithium atom would be positive and the magnitude of charge will be equal to the number of electrons lost, which is 1 in this case.
Learn more about Lithium on:
https://brainly.com/question/32300971
#SPJ6
What is the mole ratio of C3H6O₂ to CO₂? Write it as a fraction.
The mole ratio of C3H6O₂ to CO₂ ia 1:y.
Mole ratio explained.
To determine the mole ratio of C3H6O2 to CO2, we need to look at the balanced chemical equation that relates these two substances in a chemical reaction. Let's assume the balanced chemical equation is:
C3H6O2 + xO2 → yCO2 + zH2O
where x, y, and z are coefficients that balance the equation. The mole ratio of C3H6O2 to CO2 is simply the ratio of the coefficients in front of each substance in the balanced equation. From the equation above, we can see that the coefficient in front of C3H6O2 is 1 and the coefficient in front of CO2 is y. Therefore, the mole ratio of C3H6O2 to CO2 is:
1 : y
where y is the coefficient in front of CO2 in the balanced equation.
Since we don't know the exact balanced chemical equation, we cannot determine the value of y and therefore cannot simplify the ratio any further. So the mole ratio of C3H6O2 to CO2 is 1 : y, where y is an unknown integer.
Learn more about mole ratio below.
https://brainly.com/question/30851942
#SPJ1
there are several elements whose atoms make more than one type of ion. Where in
the periodic table are these elements usually found?
Answer:
Explanation:
These are the transition metals. Groups 3-12 also know as the "d" block elements
Answer ASAP Pleeeeease
Question
Which statement about fossil fuels is true?
Responses
They are an alternative energy source.
They are replaced in only a few years.
They are in high demand.
Answer:
They are in high demand.
Why is fossil fuel bad?
FOSSIL FUELS, USES, NEGATIVE IMPACTS AND SOLUTIONS;
In order to understand why it is bad to use Fossil Fuels, it is first necessary to understand what they are composed of. There are two main types of Fossil Fuels, namely, Coal and Oil.
The Formation of Coal : -
The multistage process that produces coal.
Many millennia ago, tree trunks fell and were quickly covered in water and mud. The bacteria, respiring anaerobically, due to the lack of Oxygen, produced peat. As is illustrated in stage 3, sediments built up over this peat layer and with time, heat and pressure, certain chemical changes turned the peat into Coal, as shown in stage 4. During the compression process, Sulphur compounds leached into the peat layer and eventually became a components of the final Coal. In other cases, Low sulfur coals derive their sulfur mainly from the sulfur components in the coal-forming plants. High-sulfur Coals, however, are now known to derive most of their sulfur from reduction of Sulphate ions to H2S in sea or brackish water in the coal beds by microbial processes.>
The Formation of Oil : -
The multistage process that produces oil.
Oil is essentially the remains of small fossilised sea creatures, that has been compressed and undergone pressures, eventually converted to oil. Oil is commonly accompanied by Natural Gas, which also builds up as a result of the extreme pressures. Sulphur is also found to make a percent of the oil.
The Usage and Combustion of Fossil Fuels : -
Coal and Oil are combusted to convert the chemical energy held to thermal energy, which in turn warms up water so that steam evolves. This team is drafted down a tunnel to turn a turbine, which drives a generator. This is how a power station works.
Upon observing the figure above, if you follow the path of the process, we see that coal enters at number 14 and enters the combuster at number 15. Here, it burns to heat the water at number 19, which is channeled down to drive the generator at number 5, via a series of tubes which converge into one, at number 10.
Coal or Oil or both can be used for this purpose. However the combustion of Coal and Oil releases Sulphur gas, which is dangerous for the Environment, as well as Carbon Dioxide and Carbon Monoxide, as the combustion happens in internal conditions, hence combustion may not occur fully, or in depleted Oxygen.
Negative Impacts of Sulphur Gas, Carbon Monoxide and Carbon Dioxide on the Atmosphere and the Environment : -
Sulphur Gas can dissolve in rainwater to produce a weak, aqueous Sulphuric Acid, which can fall in the form of rain. This can increase the pH of the soil or other water bodies, which can disturb marine ecosystems and even terrarial ones. It can fall on leafs and ‘wound’ them, i.e, destroy tissue due to its corrosive nature, making the plant life vulnerable to pathogens.Carbon Monoxide is a toxic gas that can cause suffocation and death. Although it is a natural component of the Atmosphere, in recent years, due to high industrial activity, its percent composition has increased significantly, which is a cause of concern towards the health of bird life. While it does not cause Greenhouse Effect directly, in the upper reaches of the Atmosphere it can combine with Oxygen to give Carbon Dioxide.…Which brings us to Carbon Dioxide. This is a greenhouse gas. On Earth, all organisms respire to produce Carbon Dioxide, so in the geological history of Earth, there has been equilibrium maintained between Oxygen and Carbon Dioxide in the Atmosphere. This, however, has been disturbed by Man’s industrial activities. This has been due to the high deforestation and lack of replacement of cut-down trees, around the planet. This disequilibrium is best depicted by the graph below.
Prevention and Reduction of These Effects : -
There are numerous methods by which these gases and their effects can be subdued. One notable example for the case of Sulphur Gas, is the “Flue Desulphurisation Method”, which effectively removes the Sulphur and separates it out, hence making it available for use in other Industrial Processes, but in safer compounds, etc.
Replanting of cut down trees can contribute towards of the re-achievement of the equilibrium that has been present in the Atmosphere before Industrial activities led to disequilibrium. Re-planting is a very simple process, but one that can go a long way. In effect, it is a two in one solution, as if we remove Carbon Monoxide emissions by reacting the gas with excess Oxygen, we get Carbon Dioxide. However, the equilibrium in the Biosphere means that is no longer a problem. Thus, replanting of trees is very important.
Number 5 please.
Show work.
Mr Clink has the genotype IOIO
Mrs Clink has genotype IOIA
The child can not belong to them because the IAIB genotype is not in the Punnet square shown
What is genotype?Genotype refers to the genetic makeup of an organism, specifically the combination of alleles (different versions of genes) inherited from its parents. It determines the traits that an organism will express, including physical characteristics, behavioral traits, and susceptibility to certain diseases.
The mother's genotype in question 2 is IOIO
The father's genotype is IAIB
The baby belongs to them because it is possible from the Punnet square shown
Learn more about genotype:https://brainly.com/question/12116830
#spj1
If 8.50 g of element A reacts with 5.50 g of element B to form compound AB, what mass of AB is formed, if no A or B is left in excess?
Answer:
massR = massP
massA + massB = massAB
18g + 4g = 22g
Explanation:
please can someone help me out with this? i need it very quickly need answer in 4 hours pls help
Explanation:nthere is your work
For the following chemical reaction:
In the laboratory, a chemist mixed aqueous barium chloride with aqueous potassium oxide which produced solid barium oxide and aqueous potassium chloride
A. Write the complete balanced chemical equation, including phase labels.
B. Identify the type of reaction that has occurred.
C. Identify the indicator that tells you a chemical reaction has occurred.
A. The balanced chemical equation with phase labels is: BaCl2 (aq) + K2O (aq) → BaO (s) + 2KCl (aq)
B. This is a double displacement or metathesis reaction, as the cations and anions of the reactants switch places to form new compounds.
C. The indicator that a chemical reaction has occurred is the formation of a solid (BaO) and the disappearance of the reactants (BaCl2 and K2O) as they react to form products (BaO and KCl).
What is balanced chemical equation?A balanced chemical equation is a representation of a chemical reaction using chemical formulas of the reactants and products, and coefficients to indicate the relative numbers of each.
The coefficients are used to balance the equation such that the number of atoms of each element in the reactants is equal to the number of atoms of the same element in the products.
Learn more about balanced chemical equation here: https://brainly.com/question/26694427
#SPJ1
Need help with these calculations attached
A. The hydronium ion concentration, [H₃O⁺] of the solution is 4.57×10⁻⁸ M
B. The hydroxide ion concentration, [OH⁻] of the solution is 1.28×10⁻⁶ M
C. The hydroxide ion concentration, [OH⁻] of the solution is 1.80×10⁻¹¹ M
A. How do i determine the [H₃O⁺] of the solution?We can determine the [H₃O⁺] of the solution as shown below:
Concentration of hydroxide ion, [OH⁻] = 2.19×10⁻⁷MConcentration of hydronium, ion [H₃O⁺] = ?[H₃O⁺] × [OH⁻] = 10¯¹⁴
[H₃O⁺] × 2.19×10⁻⁷ = 10¯¹⁴
Divide both side by 2.19×10⁻⁷
[H₃O⁺] = 10¯¹⁴ / 2.19×10⁻⁷
[H₃O⁺] = 4.57×10⁻⁸ M
B. How do I determine of [OH⁻] of the solution?We can determine the [OH⁻] of the solution as shown below:
Concentration of hydronium, ion [H₃O⁺] = 7.81×10⁻⁹ MConcentration of hydroxide ion, [OH⁻] =?[H₃O⁺] × [OH⁻] = 10¯¹⁴
7.81×10⁻⁹ × [OH⁻] = 10¯¹⁴
Divide both side by 7.81×10⁻⁹
[OH⁻] = 10¯¹⁴ / 7.81×10⁻⁹
[OH⁻] = 1.28×10⁻⁶ M
C. How do I determine of [OH⁻] of the solution?We can determine the [OH⁻] of the solution as shown below:
Concentration of hydronium, ion [H₃O⁺] = 5.57×10⁻⁴ MConcentration of hydroxide ion, [OH⁻] =?[H₃O⁺] × [OH⁻] = 10¯¹⁴
5.57×10⁻⁴ × [OH⁻] = 10¯¹⁴
Divide both side by 5.57×10⁻⁴
[OH⁻] = 10¯¹⁴ / 5.57×10⁻⁴
[OH⁻] = 1.80×10⁻¹¹ M
Learn more about hydroxide ion concentration, [OH⁻]:
https://brainly.com/question/19800885
#SPJ1
A block of aluminum occupies a volume of 28.0 mL and weighs 85.7g. What is its density?
Explanation:
The density of a substance is defined as its mass per unit volume. In this problem, we are given the volume and the mass of the aluminum block, so we can calculate its density as follows:
Density = Mass / Volume
Substituting the given values, we get:
Density = 85.7 g / 28.0 mL
Simplifying this expression, we get:
Density = 3.06 g/mL
Therefore, the density of the aluminum block is 3.06 g/mL
Answer:
3.06
Explanation:
An isotope of hydrogen, known as Tritium (hydrogen-3), has a half-life of 12 years. If a sample of tritium was prepared 60 years ago, what was its original mass if its current mass is 0.42 micrograms?
Options for answers:
a.) 1.7mg b.) 13.4mg c.) 6.7mg d.) 26.8mg e.) 3.4mg
The original mass of Tritium (hydrogen-3) was 13.4mg if its current mass is 0.42 micrograms.
The formula for radioactive decay is given by:
N = N0 x (1/2)^(t/T)
where,
N = final number of radioactive atoms
N0 = initial number of radioactive atoms
t = time elapsed
T = half-life of the radioactive substance
Let's substitute the given values into the formula:
0.42 μg = N0 x (1/2)^(60/12)
0.42 μg = N0 x (1/2)^5
0.42 μg = N0 x 1/32
N0 = 0.42 μg x 32
N0 = 13.44 μg
Therefore, the original mass of the tritium sample was 13.44 micrograms.
What is radioactive decay?
Radioactive decay is the process by which an unstable atomic nucleus loses energy by emitting ionizing radiation, such as alpha particles, beta particles, and gamma rays. This process can result in a change in the number of protons and/or neutrons in the nucleus, leading to the transformation of one element into another. The rate of decay is typically characterized by a half-life, which is the time required for half of the atoms in a sample to decay.
To know more about radioactive decay, visit:
https://brainly.com/question/1770619
#SPJ1
how the transformer work
Answer:
make me brainalist
Explanation:
The core of the transformer works to direct the path of the magnetic field between the primary and secondary coils to prevent wasted energy. Once the magnetic field reaches the secondary coil, it forces the electrons within it to move, creating an electric current via electromotive force (EMF).
Which term is defined as the ability to dissolve within a given solvent?
O solution
O solubility
O dissociating
O dissolving
20pts
Answer:
Solubility.
Explanation:
Solubility is the maximum concentration of a solute that can dissolve in a solvent at a given temperature. At the maximum concentration of solute, the solution is said to be saturated. The units of solubility can be provided in mol/L or g/L.
A mixture of 0.2000 mol of CO2, 0.1000 mol of H2 and 0.1600 mol of H2O is placed in a 2.000 L vessel. The following equilibrium is established: CO2(g) + H2(g) ⇌ CO(g) + H2O(g) At equilibrium [H2O] = 0.0856 M. a. Calculate the equilibrium concentrations of CO2, H2 and CO. b. Calculate Kc for the reaction
The equilibrium concentrations of CO₂, H₂, and CO are 0.170 M, 0.084 M, and 0.016 M, respectively.
The equilibrium amounts, what are they?Making an equilibrium concentration calculation. A chemical reaction is said to be in a state of chemical equilibrium when both the reactants and the products are in a concentration that does not vary over time any longer.
The reaction's equilibrium constant formula is as follows:
Kc = ([CO][H₂O])/([CO₂][H₂])
We obtain the following by plugging in the equilibrium amounts from the ICE table:
Kc = ((x)(0.0856))/((0.20 - x)(0.10 - x))
b. In order to determine Kc, we must first determine x using the equilibrium formula and the specified equilibrium H₂O concentration:
Kc = ((x)(0.0856))/((0.20 - x)(0.10 - x)
Kc = (x(0.0856))/(0.02 - 0.3x + x - 0.01x)
Kc = (x(0.0856))/(0.02 - 0.21x)
Kc(0.02 - 0.21x) = 0.0856x
0.02Kc - 0.21Kcx = 0.0856x
0.21Kcx + 0.0856x = 0.02Kc
x(0.21Kc + 0.0856) = 0.02Kc
x = (0.02Kc)/(0.21Kc + 0.0856)
x = (0.02Kc)/(0.21Kc + 0.0856
After solving for the equilibrium concentrations of CO₂, H₂, and CO and substituting this equation for x back into the ICE table, we arrive at:
[CO₂] = 0.170 M
[H₂] = 0.084 M
[CO] = 0.016 M
To know more about equilibrium concentrations visit:-
https://brainly.com/question/13043707
#SPJ9
discribe the difference bettween a food chain and a food web
1. Use the bond enthalpies to calculate the enthalpy change for this reaction. Is this reaction endothermic or exothermic?
Change in enthalpy =
Is this reaction exothermic or endothermic?
If bond formation in the products releases more heat energy than bond breaking in the reactants does.
Endothermic is either hot or cold.The reverse of exothermic processes is endothermic reactions. They take in thermal energy from the environment. This indicates that endothermic reactions cause their surroundings to get colder. This kind of response can be seen in the melting of ice.
What does it mean to be endothermic?An organism is said to be endothermic if it expends energy to control the internal temperature of its body. Ectothermic organisms, on the other hand, are those that control their body temperature through external environmental stimuli.
To know more about Endothermic visit:
https://brainly.com/question/23184814
#SPJ1
A sample of gas is in a container with a movable piston. The volume in the container is originally 850 ML at a temperature of 467K and a pressure of 11 point 4K PA. What will the new temperature if the volume is expanded to 1125 in El with a new pressure of 99.7 K PA?
If the volume is increased to 1125 in El with a new pressure of 99.7 K PA, the new temperature will be around 808 K.
What transpires to the gas volume in a moveable piston cylinder?Once the piston's pressure has doubled, it goes downward until the gas's pressure and the piston pressure are equal. The gas has now lost half of its original volume. The volume of gas falls to one-fourth of its initial volume if the pressure on the piston is once more increased by a factor of two.
This issue can be resolved using the coupled gas law:
(P1V1) / T1 = (P2V2) / T2
Using the following conversions, we can first change the starting volume to litres and the original pressure to atmospheres (atm):
1 mL = 0.001 L
1 kPa = 0.00987 atm
V1 = 850 mL = 0.85 L
P1 = 11.4 kPa = 0.1126 atm
T1 = 467 K
The new volume and pressure can also be converted to litres and atmospheres:
V2 = 1125 mL = 1.125 L
P2 = 99.7 kPa = 0.984 atm
Now we can plug in the values and solve for T2:
(P1V1) / T1 = (P2V2) / T2
(0.1126 atm * 0.85 L) / 467 K = (0.984 atm * 1.125 L) / T2
T2 = (0.984 atm * 1.125 L * 467 K) / (0.1126 atm * 0.85 L)
T2 = 808 K
To know more about temperature visit:-
https://brainly.com/question/13294753
#SPJ1
Answer:
548 K
I hope this helps! Cheers ^^
NEEDD HELP URGENTLY, NOBODY ELSE IS HELPING FFS
2.0 mol of Ca(OH)2 are mixed with 2.0 mol of HCl according to the following equation:
Ca(OH)2+2HCl=CaCl2+2H2O
a. Which chemical is in excess and which is limiting reactant?
b. What is the excess in grams?
c.Theoretically,how many moles of H20 will be produced?
Answer:
Explanation:
Limiting is HCl and excess is Ca(OH)2
excess is 296 grams Ca(OH)2
2 moles H2O will be formed
The Kp for the reaction A (g) ⇌ 2 B (g) is 0.0110. What is Kp for the reaction 2 B (g) ⇌ A (g)?
50 points
Problem 1. What masses of 15% and 20% solutions are needed to prepare 200 g of 17% solution?
Problem 2. What masses of 18% and 5% solutions are needed to prepare 300 g of 7% solution?
Problem 3. 200 g of 15% and 350 g of 20% solutions were mixed. Calculate mass percentage of final solution.
Problem 4. 300 g of 15% solution and 35 g of solute were mixed. Calculate mass percentage of final solution.
Problem 5. 400 g of 25% solution and 150 g of water were mixed. Calculate mass percentage of final solution.
80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.
What is Mass Percentage?
Mass percentage is the percentage of the mass of the solute in a solution to the total mass of the solution. It is calculated by dividing the mass of the solute by the total mass of the solution and multiplying by 100%. The mass percentage is often used in chemistry to express the concentration of a solution.
Let x be the mass of the 15% solution needed and y be the mass of the 20% solution needed to prepare 200 g of 17% solution. Then we have the system of equations:
x + y = 200 (total mass of the solution)
0.15x + 0.20y = 0.17(200) (total amount of solute in the solution)
Solving for x and y, we get:
x = 80 g of 15% solution
y = 120 g of 20% solution
Therefore, 80 g of 15% solution and 120 g of 20% solution are needed to prepare 200 g of 17% solution.
Learn more about Mass Percentage from given link
https://brainly.com/question/26150306
#SPJ1
pls help
2.0 mol of Ca(OH)2 are mixed with 2.0 mol of HCl according to the following equation:
Ca(OH)2+2HCl=CaCl2+2H2O
a. Which chemical is in excess and which is limiting reactant?
b. What is the excess in grams?
c.Theoretically,how many moles of H20 will be produced?
Answer:
Explanation:
Limiting is HCl and excess is Ca(OH)2
excess is 296 grams Ca(OH)2
2 moles H2O will be formed
Circle the larger one of each pair or grouping below:
Cr²+ or Cr3
Ge, Br, Ca, or Ga
(1) The larger ion is Cr³+
(2) The larger ion is Ca.
What is the size of the ions?In the first pair, we are comparing the cations Cr²⁺ and Cr³⁺. Cations are positively charged ions that form when an atom loses one or more electrons. The charge on a cation tells you how many electrons it has lost. In this case, Cr²⁺ has lost 2 electrons, while Cr³⁺ has lost 3 electrons.
When comparing the sizes of ions, we need to consider the ionic radius. The ionic radius is the distance between the nucleus of an ion and its outermost electron shell.
As we move from left to right across the periodic table, the number of protons in the nucleus increases, which pulls the electrons closer to the nucleus and makes the atoms smaller. As we move down a column in the periodic table, the number of electron shells increases, which makes the atoms larger.
Learn more about size of ions here: https://brainly.com/question/14511468
#SPJ1
Consider the neutralization reaction:
2 HNO3(aq) + Ba(OH)₂ (aq) → 2H₂O(1) + Ba(NO3)₂(aq)
A 0.120 L sample of an unknown HNO3 solution required 37.9 mL of 0.250 M Ba(OH), for complete neutralization. What is
the concentration of the HNO3 solution?
Explanation:
First, we need to write a balanced chemical equation for the neutralization reaction:
2 HNO3(aq) + Ba(OH)2(aq) → 2 H2O(l) + Ba(NO3)2(aq)
From the balanced equation, we can see that the stoichiometric ratio of HNO3 to Ba(OH)2 is 2:1. This means that 2 moles of HNO3 react with 1 mole of Ba(OH)2.
Using the given information, we can calculate the number of moles of Ba(OH)2 that reacted:
moles of Ba(OH)2 = Molarity x Volume (in L)
moles of Ba(OH)2 = 0.250 M x (37.9/1000) L
moles of Ba(OH)2 = 0.009475 mol
Since the stoichiometric ratio of HNO3 to Ba(OH)2 is 2:1, the number of moles of HNO3 that reacted is twice the number of moles of Ba(OH)2:
moles of HNO3 = 2 x moles of Ba(OH)2
moles of HNO3 = 2 x 0.009475 mol
moles of HNO3 = 0.01895 mol
Finally, we can calculate the concentration of the HNO3 solution:
concentration of HNO3 = moles of HNO3 / volume of HNO3 solution (in L)
concentration of HNO3 = 0.01895 mol / 0.120 L
concentration of HNO3 = 0.158 mol/L
Therefore, the concentration of the HNO3 solution is 0.158 mol/L.
What is the ratio of ammonia if the chemical formula is
NH3
Explanation:
The chemical formula NH3 represents ammonia, a colorless gas that is widely used in various industrial and household applications. The formula indicates that one molecule of ammonia contains one nitrogen atom and three hydrogen atoms. Therefore, the ratio of nitrogen to hydrogen in ammonia is 1:3.
This means that for every one nitrogen atom in an ammonia molecule, there are three hydrogen atoms. Alternatively, we can say that the ratio of nitrogen atoms to hydrogen atoms in ammonia is 1:3.