Answer:
H2SO4 + 2NAOH➡NA2SO4+2H2O
H2SO4 = 1*2 +32+16*3= 98g
NAOH = (11+16+1)=28
Explanation:
To calculate the number of Mole = Mole *Molar Mass
To calculate for gram = Mole/ Molar Mass
20.5g NaoH/1 * 1 mole NaOH/28g NaoH = 0.73M NaoH
0.73M NaoH /1 * 1 M H2SO4 /2M NaoH = 0.37M H2SO4
0.37 M H2SO4 /1 * 98g H2SO4 /1M H2SO4 = 0.00367g H2SO4
:- 0.00367g of Sulphuric Acid will be needed to complete the reaction.
6.3x10-5M. What is the pH?
Answer:
https://sensorex.com/ph-calculator/
Explanation:
go to this link and then scroll down a little bit and then you'll find the answer
What is the greatest concentration of pollution
Answer:
B
Explanation:The poisonous substances, present in the environment can easily get into the trophic level as living organism depends on each other and environment for food and nutrition. These poisonous substances may not be broken down in the body or excreted easily, efficiently and quickly. Instead, they accumulate in the tissues, and as the living organism eats more, the concentration of these substances increases and they pass from one trophic level to the next. The tertiary consumer being at the top of trophic levels receives the maximum pollutant. This phenomenon is known as biological magnification.
So, the correct answer is option B.
Need help with this question please.
Answer:
12.8
Explanation:
14 = pOH + pH
pH = 14 - pOH
pH = 14 - 1.2
pH = 12.8
What is the phase label on HCl?
A. g
B. aq
C.
D. e
E. s
Answer:
B. aq if the reaction is inorganic (double or single displacement), neutralization, etc.
Explanation:
Hello there!
In this case, unfortunately we are not given the undergoing chemical reaction; however, in the most of the double displacement, neutralization, precipitation and in general, inorganic reactions, the hydrochloric acid must be B. aq as it must be dissolved in water as the reaction media. On the other hand, in some organic reactions, it can be either aqueous or gaseous, the latter, specially as a product. For that reason, you will need to make sure whether your reaction is organic or inorganic to correctly figure out the phase label.
Best regards!
which of the following is an example of a chemical change?
cutting a log 2.
dissolving sugar
baking a cake
boiling water
Answer: Baking a Cake
Answer:
Baking a cake
Explanation:
Ape-x aprroved
Which of the following behaviors might indicate a patient is drug seeking?
A. A patient wants to avoid a specific medication because of
potential side effects.
B. A patient explains that she is from out of town and needs a
specific medicine because she left her prescription at home.
C. A patient fears her new prescription will conflict with another
medication she's currently taking.
D. A patient thinks she needs a smaller dose of her prescription
because it gives her headaches.
SUBMIT
Answer:
B is correct :)
Explanation:
Trust me I just took the test
How are gas giants different from each other
Answer:there different from the rocky like planets gas giants don't have such a firm surface like rocky terrestrial planets
Explanation:
The nature particle model of matter describe the property of solid, liquid and gas in molecular level. Which of the given statements below is TRUE?
A. Matter is made up of large particles.
B. Particles of matter have spaces between them.
C. Particles of matter are not moving all the time.
D. The particles of matter do not attract each other.
Answer:
B. Particles of matter have spaces between them.
Explanation:
The particle nature model of matter is an model used to explain the properties and nature of matter. The statements of the particle nature model of matter are as follows :
1. Matter is made of small particles of atoms or molecules.
2. The particles of matter have space between them. The spaces between the particles are least in solids as they are closely packed together but are greatest in gases whose particles are far apart from each other.
3. The particles of matter are in constant motion at all times. Solids particles are not free to move due to strong molecular forces between the particles, but are constantly vibrating in their mean positions. Liquid particles free to move due to lesser molecular forces while gas molecules which have negligible intermolecular forces have the greatest ability to move.
4. The particles of matter are attracted to each other by intermolecular forces. These forces are greatest in solids and least in gases.
The correct option is B.
CHEMISTRY HELP ASAP
Use this balanced equation for the two questions below:
2KClO3(s) → 2KCl(s) + 3O2(g)
9. How many moles of KClO3 are used to produce 9.9 moles of O2?
10. How many moles of O2 are produced from 11.2 moles of KClO3?
PLS SHOW WORK TOO THX
Answer:
1 mole of KClO_3 contains 3 moles of O.
10 moles of O_2 contains 20 moles of O.
You need 20/3 moles of KClO_3 to produce 10 moles of O_2
Explanation:
sana makatulong
Which of the following patients should be admitted as an inpatient at a
hospital?
A. Katie's having her tonsils removed and will be able to go home
shortly after she wakes up from surgery.
B. Phil's having his blood sugar tested and having his annual
physical
c. Salvatore's having a hip transplant and will need to be closely
monitored for a week.
D. Chen's having chest X-rays taken to determine if he has a broken
rib.
SUBMIT
40 POINTS!!! Ice at 0.0 degrees C is combined with 50.0g of water at 75.0 degrees C. Calculate the grams of ice present initially if the entire mixture comes to a final temperature of 25.0 degrees C after the ice melts. Specific heat of water is 4.18 J/goC. SHOW WORK!
Answer:
mi = 31.28 g
Explanation:
According to the law of conservation of energy:
[tex]Heat\ Gain\ by\ Ice = Heat\ Lost\ by\ Water\\m_iL = m_wC\Delta T\\[/tex]
where,
mi = mass of ice = ?
L = Latent heat of fusion of ice = 334 J/g
mw = mass of water = 50 g
C = specific heat of water = 4.18 J/g.°C
ΔT = change in temperature of water = 75°C - 25°C = 50°C
Therefore,
[tex]m_i(334\J/g) = (50\ g)(4.18\ J/g.^oC)(50^oC)[/tex]
mi = 31.28 g
Identify the term that matches each electrochemistry definition.
a. The electrode where reduction occurs ___________
b. An electrochemical cell powered by a spontaneous redox reaction ___________
c. The electrode where oxidation occurs__________
d. An electrochemical cell that takes in energy to carry out a nonspontaneous redox reaction ____________
e. A chemical equation showing either oxidation or reduction ___________
Answer: a. Cathode
b. Galvanic cell
c. Anode
d. Electrolytic cell
e. half reaction
Explanation:
Galvanic cell or Electrochemical cell is defined as a device which is used for the conversion of the chemical energy produced in a spontaneous redox reaction into the electrical energy.
Electrolytic cell is a device where electrical energy is used to drive a non spontaneous chemical reaction.
In the electrochemical cell, the oxidation occurs at an anode which is a negative electrode and the reduction occurs at the cathode which is a positive electrode. Thus the electrons are produced at anode and travel towards cathode.
The balanced two-half reactions will be:
Oxidation half reaction : [tex]M\rightarrow M^{n+}+ne^-[/tex]
Reduction half reaction : [tex]N^{n+}+ne^-\rightarrow N[/tex]
Thus the overall reaction will be: [tex]M+N^{n+}\rghtarrow M^{n+}+N[/tex]
How did Robert Millikan's oil drop experiment change scientists' view of the
atom?
A. It identified the location of the nucleus.
B. It showed that atoms could not be divided into smaller particles.
C. It identified the charge on a single electron.
D. It showed that atoms were found in different energy levels.
SUBMIT
Answer:
Hello There!!
Explanation:
I think the answer is possibly C. It identified the charge on a single electron.
hope this helps,have a great day!!
~Pinky~
[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]
C. It identified the charge on a single electron.
ThanksHope it helpsWhat is the Kc for the following reaction at equilibrium at 500∘C if [N2]= 0.41 M , [H2]= 0.41 M , and [NH3]= 2.2 M ? N2(g)+3H2(g)⇌2NH3(g)
Answer:
answer po Yan hope it help
Electrolysis is used in the electroplating of metals. The same amount of current is passed through separate aqueous solutions of CuSO4, Sn(SO4)2 and Cr2(SO4)3 in separate electrolytic cells for the same amount of time. State and explain which cell would deposit the greatest amount (in mol) of metal. Identify the electrode at which the metal is deposited.
Answer:
CuSO4 cell will have the greatest amount of deposit among all three. The deposit will occur at the cathode
Explanation:
The valence of the elements in this case is as follows -
Cu - 2e-
Sn - 4e-
Cr - 3e-
CuSO4 cell will have the greatest amount of deposit among all three
The atoms of copper metal will deposit at the cathode. At the cathode, the least number of moles of electrons needed .
Hence, more amount of copper can be extracted out by the electrolyte
If the solubility of sodium chloride is 36 grams per 100 grams of water, which of the following solutions would be considered unsaturated? If the solubility of sodium chloride is 36 grams per 100 grams of water, which of the following solutions would be considered unsaturated? 3.25 moles of NaCl dissolved in 500 ml of water 1.85 moles of NaCl dissolved in 300 ml of water 5.8 moles of NaCl dissolved in 1 L of water none of the above
Answer: If the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.
Explanation:
A solution which contains the maximum amount of solute is called a saturated solution. Whereas a solution in which more amount of solute is able to dissolve is called an unsaturated solution.
Now, the number of moles present in 36 g of NaCl (molar mass = 58.4 g/mol) is as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{36 g}{58.4 g/mol}\\= 0.616 mol[/tex]
This shows that solubility of sodium chloride is 36 grams per 100 grams of water means a maximum of 0.616 mol of NaCl will dissolve in 100 mL of water.
So, a solution in which number of moles of NaCl are less than 0.616 mol per 100 mL then the solution formed will be an unsaturated solution.
As 5.8 moles of NaCl dissolved in 1 L (or 1000 mL) of water. So, moles present in 100 mL are calculated as follows.[tex]Moles = \frac{5.8 mol}{1000 mL} \times 100 mL\\= 0.58 mol[/tex]
Moles present in 100 mL of water for 3.25 moles of NaCl dissolved in 500 ml in water are as follows.[tex]Moles = \frac{3.25 mol}{500 mL} \times 100 mL\\0.65 mol[/tex]
Moles present in 100 mL of water for 1.85 moles of NaCl dissolved in 300 ml of water are as follows.[tex]Moles = \frac{1.85 mol}{300 mL} \times 100 mL\\= 0.616 mol[/tex]
Thus, we can conclude that if the solubility of sodium chloride is 36 grams per 100 grams of water then 5.8 moles of NaCl dissolved in 1 L of water solution would be considered unsaturated.
temperature usually increase when water condenses which behavior of water is most directly responsible for this phenomenon?
Answer:
Temperature usually increases when water condenses. What behavior of water is most directly responsible for this phenomenon? The release of heat by the formation of hydrogen bonds. Hydrogen bonds stabilize and keep the of ice farther apart than the water molecules of liquid water.
Due today! Why is it a good idea to have floating cities?
A: We are running out of land
B: We need it for pollution cleanup
C: Oceans are rising
D: It's a sustainable way to live
Answer:
in my opinion I think the answer the be "A"
(a) Using the expression Ka=[H+][A−][HA] , explain how to determine which solution has the lower pH , 0.10MHF(aq) or 0.10MHC2H3O2(aq) . Do not perform any numerical calculations.
Answer:
Ka=[H+][A−]/[HA]
which solution has the lower pH, 0.10MHF(aq) or 0.10MHC2H3O2(aq) :
Higher value of Ka indicates greater ionization thus more protons in solution, higher H+ concentration in solution means lower pH value.
Since HF have higher Ka have, thus HF solution will have lower pH.
The measurement is when the solution has the lower pH so HF should have higher ka.
Measurement when the solution has the lower pH?In the given solution, it contains the lower pH, 0.10MHF(aq) or 0.10MHC2H3O2(aq).
Here higher value of Ka represents the high ionization so there should be more protons in the solutions. and, the higher h+ concentration have the lower pH value.
So in the case when HF has higher Ka, due to this, HF solution will have lower pH.
Learn more about solution here: https://brainly.com/question/14619461
help me plss plss.plsss.plsssplss plsss.plsss plsss plsss plsss
Answer:
1. Distance = 5 cm
Displacement = 1 cm
2. Distance = 7 cm
Displacement = 1 cm
3. Distance = 5 cm
Displacement = -1 cm
4. Distance = 6 cm
Displacement = -2 cm
5. Distance = 4 cm
Displacement = 0 cm
Explanation:
The distance an object travels is a measure of the total ground cobpvered bybthe object without regard to the direction of motion. It is a scalar quantity as it only takes into account magnitude but not the direction of a quantity.
Displacement however, is a measure of how far away or apart an object is from its starting position. It a vector quantity as it takes into account both the magnitude and direction in its measurement.
From the attachment provided, considering forward direction as positive and reverse as negative :
1. When a object moves from point 1 to point 4 and reverses to point 2.:
Distance = from 1 to 4 = 3 cm; from 4 back to 2 = 2 cm; 3 + 2 = 5 cm
Displacement = from 1 to 4 = +3 cm; from 4 back to 2 = -2 cm; 3 - 2 = 1 cm
2. When an object moves from point 1 to 5 and reverses to 2:
Distance = from 1 to 5 = 4cm; from 5 back to 2 = 3 cm; 4 + 3 = 7 cm
Displacement = from 1 to 5 = +4 cm; from 5 back to 2 = -4 cm; 4 - 3 = 1 cm
3. When an object moves from point 1 to 3 and then reverses to 0.
Distance = from 1 to 3 = 2 cm; from 3 back to 0 = 3 cm; 2 + 3 = 5 cm
Displacement = from 1 to 3 = +2 cm; from 3 back to 0 = -3 cm; 2 - 3 = -1 cm
4. When an object moves from point 3 to 5 and then reverses to 1:
Distance = from 3 to 5 = 2 cm; from 5 back to 1 = 4 cm; 2 + 4 = 6 cm
Displacement = from 3 to 5 = +2 cm; from 5 back to 1 = -4 cm; 2 - 4 = -2 cm
5. When an object moves from point 2 to 4 and then reverses to 3.
Distance = from 2 to 4 = 2 cm; from 4 back to 2 = 2 cm; 2 + 2 = 4 cm
Displacement = from 2 to 4 = +2 cm; from 4 back to 2 = -2 cm; 2 - 2 = 0 cm
what is the formula for tin(III) sulfate
Answer:
SnSO₄
Explanation:
Tin(II) sulfate is a chemical compound. It is a white solid that can absorb enough moisture from the air to become fully dissolved, forming an aqueous solution; this property is known as deliquescence.
Answer:
please give me brainlist and follow
Explanation:
SnSO₄
A gas in a sealed container has a pressure of 125 atm at a temperature of 303 K. If the pressure in the container is increased to 200 atm, what is the new temperature if the volume remains constant?
(Show work pls :)!)
Answer:
[tex]T_2=484.8K[/tex]
Explanation:
Hello there!
In this case, according to the the variable temperature and pressure and constant volume, it turns out possible for us to calculate the new temperature via the Gay-Lussac's law as shown below:
[tex]\frac{T_2}{P_2} =\frac{T_1}{P_1}[/tex]
Thus, by solving for the final temperature, T2, we obtain:
[tex]T_2 =\frac{T_1P_2}{P_1}[/tex]
So we plug in the given data to obtain:
[tex]T_2 =\frac{303K*200atm}{125atm}\\\\T_2=484.8K[/tex]
Best regards!
Part A
How many moles of chlorine gas are needed to make 0.6 moles of sodium chloride?
Given the reaction: 2Na + Cl2 + 2NaCl
O 1.2
O 0.6
0 3.6
O 0.3
not enough information
Submit
Request Answer
Answer:
[tex]n_{Cl_2}=0.3molCl_2[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction whereas the sodium chloride is in a 2:1 mole ratio with chlorine, the required moles of the later are computed as shown below:
[tex]n_{Cl_2}=0.6molNaCl*\frac{1molCl_2}{2molNaCl}[/tex]
So we cancel out the moles of NaCl to obtain:
[tex]n_{Cl_2}=0.3molCl_2[/tex]
Best regards!
Humans are always consumers. Most humans are omnivores, but some
humans eat only plant matter making them herbivores. However, all
humans are considered to be -
Select one:
autotrophs
heterotrophs
producers
carnivores
Answer:
A. Autotrophs
Explanation:
an autotroph, def an organism that is able to form nutritional organic substances from simple inorganic substances such as carbon dioxide.
humans and other mammals, plants, and a select few other things
What do you plan to do this weekend !
( Giving out Branliest ) <3
Answer:
Go to the pool , Bake, sleep, Watch ,Movies, go out with my freinds<3
Explanation:
what is the mass of 1.5 x 10^21 silicon atoms?
Answer:
0. 070g
Mass of 1 Si atom =28.08/6.022*1023
So mass 1.5 *1021*4.6629*10-23
Answer:
[tex]\boxed {\boxed {\sf 0.070 \ g \ Si}}[/tex]
Explanation:
We are given a value of atoms and asked to find the mass. We can complete this in 2 steps.
1. Convert Atoms to Moles
First, we have to convert atoms to moles. We use Avogadro's Number or 6.022 × 10²³. This is the number of particles (atoms, molecules, formula units, etc.) in 1 mole of a substance.
In this case, the particles are silicon atoms. We can set up a proportion.
[tex]\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]
Multiply by the value of atoms given.
[tex]1.5 \times 10^{21} \ atom \ Si *\frac { 6.022 \times 10^{23} \ atom \ Si }{1 \ mol \ Si}[/tex]
Flip the ratio. This allows the atoms of silicon units to cancel and leave the moles of silicon.
[tex]1.5 \times 10^{21} \ atom \ Si *\frac {1 \ mol \ Si } {6.022 \times 10^{23} \ atom \ Si}[/tex]
[tex]1.5 \times 10^{21}*\frac {1 \ mol \ Si } {6.022 \times 10^{23} }[/tex]
[tex]\frac {1.5 \times 10^{21} \ mol \ Si } {6.022 \times 10^{23} }[/tex]
[tex]0.002490866822 \ mol \ Si[/tex]
2. Convert Moles to Grams
Next, we convert the moles to grams. We use the molar mass, which is found on the Periodic Table. This value is the number of grams in 1 mole of a substance. Look for silicon (Si).
Si: 28.085 g/molUse this value as a ratio.
[tex]\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
Multiply by the number of moles we calculated.
[tex]0.002490866822 \ mol \ Si *\frac {28.085 \ g \ Si}{1 \ mol \ Si}[/tex]
The moles of silicon units cancel, so we are left with grams.
[tex]0.002490866822 *\frac {28.085 \ g \ Si}{1}[/tex]
[tex]0.002490866822 *{28.085 \ g \ Si}[/tex]
[tex]0.06995599469 \ g \ Si[/tex]
3. Round
Finally we must round our answer. The original value has 2 significant figures, so our answer must have the same. For the number we calculated, that is the thousandth place.
[tex]0.069\underline95599469 \ g Si[/tex]
The 9 tells us to round the other 9 to a 0, then the 6 to a 7.
[tex]0.070 \ g \ Si[/tex]
The mass of 1.5 × 10²¹ silicon atoms is 0.070 grams of silicon.
Explain the difference between an exothermic and an endothermic reaction.
Answer:
Explanation:
Heat is a reactant.
If the equation requires heat to occur, the reaction is endothermic
The equation would have this model
A + B + heat =====> C + D
If the equation gives away heat, then it is exothermic
The equation would look like this. (I'll use a common reaction)
CH4 + 2O2 - heat ===> CO2 + 2H2O
The heat is minus when it has to be given away.
What type of consumer eats only producers?
Answer: Primary consumers make up the second trophic level. They are also called herbivores. They eat primary producers—plants or algae—and nothing else. For example, a grasshopper living in the Everglades is a primary consumer
Answer:
primary consumer make up the second trophic level .they are also herbivores they eat primary consumer plants or alger and nothing else .for example a grasshopper living in the everglades is a primary consumer
calculate the percentage of CL in AL(CLO3)3
Answer:
46.41%
Explanation:
Find the total r.m.m of AL(CLO3)3 put it equals to 100%.....The take 106.5,the total r.m.m of Cl and find the missing which is the percentage by cross multiplication
- Calculate the Standard Enthalpy of the reaction below:
NH3(g) + HCI (g) → NH4Cl(s)
Using the following Enthalpy of Reactions:
2HCI(g) → H2(g) + Cl2(g)
AH = +184.6 KJ
2H2(g) + 1/2 N2(g) + 1/2 Cl2(g) → NH4Cl(s) deltaH = -314.4 kJ
N2(g) + 3 H2(g) → 2 NH3(g)
deltaH = +184.6 kJ
Answer:
Explanation:
We have the three equations:
[tex]NH_{3(g)} + HCl_{(g)} => NH_4Cl_{(s)} ..... \Delta H = ? (1)\\2HCl_{(g)} => H_{2(g)} + Cl_{2(g)} .... \Delta H = +184.6 kJ (2)\\2H_{2(g)} + 1/2N_{2(g)} + 1/2Cl_{2(g)} => NH_4Cl_{(s)} ..... \Delta H = -314.2 kJ (3)\\ N_{2(g)} + 3H_{2(g)} => 2NH_{3(g)} .... \Delta H = +184.6kJ (4)[/tex]
(can you double check that it is 184.6kJ for both equations 2 and 4 because it seems unlikely). We need to solve for equation 1 by addition and changing equations 2, 3 and 4. After possibly some trial and error, we can find that if we flip equations 4, multiply equation 3 by 2, add the equations together, and then finally divide by 2, we can get equation 1. We will get the answer of -314.2 kJ. However, I am again skeptical about the delta H values for equation 2 and 4 so double check that. This method might be super confusing and it is really hard to explain. So what I would suggest you to watch videos on Hess' law.