The chemical formula for ferric ion (Fe3+) is Fe(III) or Fe3+. To calculate the number of ions contained in a given quantity of a material, multiply the number of moles by FeBr3 Avogadro's number.
There would be 1.00 x Avogadro's number of Fe(III) ions in 1.00 mole of Fe(III) (FeBr3). The value of Avogadro's number is 6.022 x 1023 atoms or ions per mole. So there are roughly 6.022 x 1023 Fe(III) ions in 1.00 mole of FeBr3. Although commercially accessible at a low cost, FeBr3 may be made by treating iron metal with bromine:2 Fe+3 Br2 2 FeBr3 FeBr3 decomposes to ferrous bromide over 200 °C: 2FeBr3 + Br2 = 2FeBr2 + Br2 Because chlorine has a higher oxidizing activity, iron(III) chloride is much more stable. FeI3 is unstable because iron(III) oxidizes.For every mole of iron (III) bromide, which has the formula FeBr3 F e B r 3, three moles of bromide ions are present. The chemical compound with the formula FeBr3 is iron(III) bromide.
learn more about FeBr3 here:
https://brainly.com/question/8430600
#SPJ4
1. What is carbon cycle ?
2. State the stages of carbon cycle.
3. State 5 importance of carbon cycle.
when is the best time to clean glassware during the lab session?
Wash glassware in hot water or a glassware washer as soon as you're finished using it to avoid the formation of hard-to-remove residue. Corning recommends soaking glassware in water if it's impossible to wash it immediately after use
Any glass laboratory equipment is referred to as glassware. When you're through using a glass item, wipe it down to get rid of any cleaning agent.
Glass makes up a large portion of our scientific equipment, including measuring cylinders, conical flasks, and beakers. After use, these glasses need to be professionally cleaned.
Since they are frequently cleaned with a solvent, small particles of the cleaning agent stick to the glassware.
In order to avoid contaminating a sample placed in glassware, these cleaning solvent particles must be removed with a wipe.
Learn more about glassware here:
https://brainly.com/question/20372443
#SPJ4
Acetaminophen is the active ingredient in Tylenol. Calculate the mass of carbon in 99.0 g of acetaminophen (CgH9NO₂) NOTE: Round your typed answer to include 2 decimal places.
Answer:
6.55 g
Explanation:
The atomic mass of Carbon (C) is 12.0107, of Hydrogen (H) is 1.008, of Nitrogen(N) is 14.0067, and of Oxygen(O) is 15.9994
Therefore the molar mass of acetaminophen = 12.0107 + 4 * 1.008 + 14.0067 + 2 * 15.9994 = 151.16
mass of C in 99.0 g of acetaminophen = (99.0 g / 151.16 g/mol) * 1 mol C/ 1mol acetaminophen
mass of C in 99.0 g of acetaminophen = 6.545 g
what physical property below would have made a mineral appropriate for use as an old-time window covering before glass was widely available?
being able to be divided into big, thin layers FEEDBACK: A mineral must be divided into numerous, thick layers in order to be utilized as a window pane. supple, fragile layers
What constitutes a mineral?A mineral is an organic element or compound that occurs in nature and has a recognizable chemical composition, crystalline size, and physical characteristics. Silica, feldspar, mica, albite, olivine, and calcite are examples of common minerals.
A mineral is it a rock?A mineral is just a substance that occurs naturally having unique atomic structures, compositions, and chemical and physical properties. Rocks are often composed of two or even more minerals that have been mixed by geological processes.
To know more about minerals visit:
https://brainly.com/question/8831889
#SPJ4
Make a simple abstract design using shape tools and color palette on MS paint. Give it an interesting title using paint tool
To make an abstract design, use the MS Paint tool. To build the design, you may utilize form tools such as circles, squares, and triangles. You may also utilize the color pallet to add color to the shapes.
You may also use the paint brush to draw patterns or lines. You may use the text tool to add text to the design for the title. You may select a typeface and color that compliments the overall design. For example, you might call it "Chaotic Harmony" or "Colorful Illusion" to convey the abstract design. You may use the text tool to add text to the design for an intriguing title. You may select a typeface and color that compliments the overall design. a simple abstract design using shape tools and color palette on MS paint. Give it an interesting title using paint tool. You may use the text tool to add text to the design for an intriguing title. You may select a typeface and color that compliments the overall design.
learn more about Harmony here:
https://brainly.com/question/6247513
#SPJ4
silver nitrate has a lattice energy of -820 kj>mol and a heat of solution of -22.6 kj>mol. calculate the heat of hydration for silver nitrate
The heat of hydration for silver nitrate is -842.6 kJ/ mole.
The heat of hydration is the heat generated when water comes into contact with cement powder. The amount of heat released is influenced by the cement's composition, curing temperature, water to cement ratio, and cement fineness. The heat of hydration is the quantity of energy produced when one mole of ions are hydrated.
Lattice energy = -820 kJ/mole
Heat of solution = +22.6 KJ/mole
Lattice breakdown is and endothermic reaction during the formation of solution a nd hydration is an exothermic reaction as ions interact with solvent molecules
By using the formula,
Enthalpy of solution = Lattice energy + hydration energy
Now put the values and calculate,
-22.6 kj/mole = + 820 kj/mole + hydration energy
-22.6 kJ/ mole - 820 kJ/ mole = hydration energy
-842.6 kJ/ mole = hydration energy
Learn of heat of hydration at https://brainly.com/question/14668980
#SPJ4
I NEED HELP ASAP
What is the frequency associated radiation of these wavelengths?
a) 8.0x10^-3 cm
b) 12.0 micrometers
c) 2.80x10^-10 m
d) 300 nm
Answer:
a
Explanation:
I don't know two jsjsjsjahajaja
0.038 moles of o2 are collected after the reaction of 78.2 ml of a 4.6 m solution of h2o2. the density of the solution is 1.4 g/ml. what is the percent yield?
The percent yield of the reaction of H2O2 is found to be 21.16%
What varies the theoretical yield from the actual yield?The theoretical yield is the yield that is obtained using a balanced chemical reaction. What you actually obtain in a chemical reaction is the actual yield. The actual yield is evaluated with the theoretical yield to establish the percent yield.
2 H2O2 => 2H2O + O2
78.2 mL of 4.6 M solution of H2O2 :
=> 78.2/1000*4.8= 0.359 mole H2O2
2 moles H2O2 ---> 1 mole O2
=> 0.359 moles H2O2-----> x mole O2
x => 0.359/2= 0.1795mole O2
0.038 mole O2 was collected
Thus, percent yield = 0.038/0.1795*100=21.16%
What does "actual yield" mean?Actual Yield is the quantity of a product discovered to be created during a chemical process.
Learn more about percentage yield here:
brainly.com/question/12704041
#SPJ4
an aqueous solution is 28.0% by mass silver nitrate, agno3, and has a density of 1.29 g/ml. the molarity of silver nitrate in the solution is
The molarity of silver nitrate (AgNo₃) in the solution is 0.127 M.
To calculate the molarity of silver nitrate (AgNO₃) in the solution, we first need to determine the number of moles of silver nitrate present. We can do this by using the mass percentage of silver nitrate, which tells us that 28.0% of silver nitrate is present in every 100 g of solution is:
(28.0/100)×100g = 28 grams
Next, we need to determine the number of moles of silver nitrate present by using the molar mass of AgNO₃, which is 169.87 g/mol:
28g / 169.87g/mol = 0.164 moles
Next, we use the density of the solution to determine the volume:
1.29g/ml = 1.29g/1ml = 1.29ml
We can then use the formula molarity = moles of solute / liters of solution to calculate the molarity of the silver nitrate in the solution:
molarity = moles of solute / liters of solution
molarity = 0.164 moles / 1.29ml
molarity = 0.127 M
To learn more about molarity visit: https://brainly.com/question/14469428
#SPJ4
a momentary change in the electron distribution surrounding an atom or a molecule causes it to have a(n)
A momentary change in the electron distribution around an atom or molecule can cause it to have an electrical charge.
A momentary change in the electron distribution surrounding an atom or a molecule causes it to have an electrical charge. This can be due to a variety of different causes, such as a transfer of electrons from one atom to another, or a temporary change in the electron configuration due to the addition or removal of an electron. This can be a temporary or permanent change depending on the cause. The electrical charge can then be used to power devices, or even to manipulate the behavior of particles or molecules in the surrounding area. This makes it a powerful tool in the manipulation of matter, especially in the field of nanotechnology.
To know more about electrical charge click below:
https://brainly.com/question/9194793#
#SPJ4
1. How does the chemical equation show that a chemical reaction took place?
2. What two elements are bonding in the chemical equation shown above?
3. What do the large numbers to the left of a symbol or formula tell you? (ex, 2Mg)
4. What do the small numbers to the right of a symbol or formula tell you? (ex. O2)
5. What is true about the elements at the start of a chemical reaction compared to the elements at the end of a the reaction?
1) There is a new product on the right hand side
2) Magnesium and oxygen
3) The stoichiometric coefficient of the reactants
4) The number of atoms of each of the elements in the molecule
5) At the start of the reaction, the elements are isolated while at the end of the reaction, the elements are combined.
What is a chemical reaction?We have to note that when we talk about a chemical reaction we mean the combination of two or more substances so that we can be able to get a product that is different from the reactants.
in this case, we can see that the reaction that has taken place is the combination of the oxygen molecule and the magnesium atom so as to give the magnesium oxide compound.
Learn more about reaction:https://brainly.com/question/28984750
#SPJ1
the uranium- 238nuclide radioactively decays by alpha emission. write a balanced nuclear chemical equation that describes this process.
238 92 U => l234 90 Th + 4 2 He represents the accurate nuclear chemical equation for this operation. As a result, uranium-238 decays by emitting -particles, which results in the production of thorium-234.
According to the following chemical equation: 238 92 U => l234 90 Th + 4 2 He The subscript sums (atomic numbers or charges) on both sides of the equation must be same, as this is crucial information. A -particle contains the nucleus of helium. Having two protons and two neutrons gives it a mass of four. As an atomic nucleus decays, an alpha particle is released. It transforms (or decays) into an atom that has an atomic number of 2 fewer and a mass number of 4 less.
Learn more about chemical equation here
https://brainly.com/question/30087623
#SPJ4
chemical containers must be sealed when they are stored after the experiment ends and they will be used at a later time/date. group of answer choices true false
Chemical containers must be sealed properly when they are stored after the experiments ends so that the chemicals do not react with atmospheric gases.
It is advisable to use laboratory grade refrigerators and freezers to store sealed chemical containers containing flammable liquids that requires a cool storage.
Chemicals that are hazardous must be stored below eye level and should not be kept on the floor or window edges.
Chemicals must be stored in containers that are made up of materials that do not react with the composition of the chemical stored in that particular container. Strong acids and bases should be stored separately.
To know more about chemical containers here
https://brainly.com/question/10243991
#SPJ4
an atom has four electrons in its valence shell. what type(s) of covalent bonds is it capable of forming with oxygen?
An atom with four electrons in its valence shell is capable of forming double and triple covalent bonds with oxygen.
An atom with four valence electrons is typically carbon or silicon, they are both capable of forming covalent bonds with oxygen by sharing electrons. A single covalent bond is formed when two atoms share one pair of electrons. A double covalent bond is formed when two atoms share two pairs of electrons, and a triple covalent bond is formed when two atoms share three pairs of electrons. In the case of carbon and silicon, they can share 4 electrons with an oxygen atom in order to fill their valence shell. This would result in the formation of a double covalent bond, CO2 or SiO2. Additionally, they can share 6 electrons with an oxygen atom, which would result in the formation of a triple covalent bond, CO3 or SiO3.
To know more about valence shell click below:
https://brainly.com/question/2725863#
#SPJ4
If an atom has four electrons in its valence shell it can form one double bond or two single covalent bond with oxygen.
Covalent bond is a type of bond that is formed between non-metal atoms. Covalent bond is formed as a result of sharing electrons between non-metal atoms involved. This type of bond is formed when atoms involved contribute equal number of electrons to the bond formation. The atom with four outer most electrons may share its electrons with two oxygen atoms to form a compound with a double covalent bond. Valence shell is defined as an electron in the outer shell associated with an atom. This can participate in the formation of a chemical bond if the outer shell is not closed. A shared pair forms with both atoms in the bond each contributing one valence electron in a single covalent bond.
To learn more about Covalent bond please visit:
https://brainly.com/question/3447218
#SPJ4
what are the two common misconceptions about cellular respiration?
PLS USE YOUR OWN WORDS
Many pupils believe in error that plants solely engage in photosynthesis whereas only mammals engage in cellular respiration. They don't know that plants also undergo cellular respiration to generate ATP for cellular functioning.
What does breathing entail, exactly?Our lungs and respiratory system are necessary for breathing. They exhale carbon dioxide and inhale oxygen, which is referred to as inhalation, into our bodies (called expiration, or exhalation). The exchange between oxygen or dioxide occurs throughout breathing.
What does breathing properly entail?When assessing someone's respiration, it's critical to consider their breathing difficulties. When at rest, an adult in good health breaths 12 to 16 times each minute.
To know more about Respiration visit:
https://brainly.com/question/18024346
#SPJ1
A student in your class has decided to dissolve epsom salts in water and observe the crystals that are left behind after the water evaporates. They have selected this reaction for their culminating event project. What advice would you give this student. Is this an example of a chemical change and reaction? Use evidence and scientific reasoning to support your claim
The action of dissolving Epsom salts (magnesium sulfate) in water and observing the crystals that are left behind after the water evaporates is a physical change, not a chemical change.
A chemical change is a process that leads to the formation of new substances, whereas a physical change is a process that alters the form of a substance without creating new substances. In this case, the Epsom salts are not forming new substances when it dissolves in water, it is simply change its state from a solid to a solution. And when the water evaporates, the Epsom salts will change back to their original solid form. Evidence to support this claim can be found in the fact that the chemical composition of the Epsom salts remains the same before and after the dissolution process. Magnesium sulfate has the same chemical formula (MgSO4) before and after being dissolved in water, and also before and after the water evaporates. The chemical composition is unchanged and the substance is still magnesium sulfate.
Learn more about chemical change here:
https://brainly.com/question/11321843
#SPJ4
the periodic trend for electronegativity is smiliar to what other trend
Given that AG for the reaction below is -957.9 kJ, what is AG, of H₂O?
AGI,NH3-16.66 kJ/mol
AGINO 86.71 kJ/mol
= =
O-228.6 kJ/mol
O-206.4 kJ/mol
O 46.7 kJ/mol
O 90.7 kJ/mol
4NH3(g) +50₂(g) → 4NO(g) + 6H₂O(g)
The free energy of the water is obtained as 90.7 kJ/mol. Option D
What is the Hess law?We have to note that the Hess law of the constant heat summation is the law that we can be able to use in this case so as to be able to obtain the standard free energy of the formation of the water.
We have to keep in mind that the standard free energy of the reaction can be obtained by;
Standard free energy of reaction = Standard free energy of product - Standard free energy of the reactants
Thus;
Let the standard free energy of water be X
-957.9 = [4( 86.71 ) + 6X] - [4(-16.66) + 5(0)]
957.9 = (346.84 + 6X) - (-66.64)
957.9 = 280.2 + 6X
X = 90.7 kJ/mol
Learn more about free energy:https://brainly.com/question/15319033
#SPJ1
which bonds occur between two atoms in each of which the number of protons does not equal the number of electrons? select all that apply.
The bonds occur between two atoms in each of the which the number of the protons not equals to the number of electrons is the 1) ionic bond.
An atom which do not have the number of the protons is equals to the number of the electrons is called as the ion. The ion may be positive or negative charge.
The ionic bond is formed between the negatively charged atom and the positively charged atom. The compound formed between the atoms by the complete transfer of electrons called as the ionic compounds and the bond is called as the ionic bond.
The given question is incomplete, the complete question is :
which bonds occur between two atoms in each of which the number of protons does not equal the number of electrons? select all that apply.
1) Ionic bond
2) covalent bond
3) coordinate bond
4) none of the above
To learn more about atom here
https://brainly.com/question/28540793
#SPJ4
I need a description of the rocks.
Table D. Absolute Age of Rock Layers
Basalt is 65.5 million years ago to the present. Limestone with fossil was about 500 million years ago. Sandstone with trilobite is between 525 and 505 million years old.
What is Absolute Age of rocks?A quantifiable measurement of how old something is or how long ago it occurred, expressed typically in terms of years, is called an absolute age in geology.
Radiometric techniques are used the most often in geology to determine absolute ages.
Basalt was formed 65.5 million years ago. Fossilized limestone dates back to roughly 500 million years. Trilobites are found in sandstone that is between 525 and 505 million years old.
In the Carboniferous epoch, about 340 million years ago, the earliest amniotes diverged from their amphibian predecessors. Soon after the first amniotes emerged, they split into two major lines.
Thus, these are the probable ages of the given rocks.
For more details regarding absolute age, visit:
https://brainly.com/question/29770777
#SPJ1
The ratio of carbon atoms to hydrogen atoms to oxygen atoms in a molecule is 2 to 4 to 1
What is the molecular formula of this substance if its molar mass is 88 grams.
Answer:
C4H8O2
Explanation:
The empirical formula is C2H4O1 [C/H/O is 2/4/1]
As written, the molar mass is (2*12) = 24, plus (4*1) = 4, plus (1*16) = 16, for a total of 44 grams/mole. Two units of C2H4O1 would be 88 grams/mole, which is what is needed.
The molecular formula is C4H8O2.
Answer:
[tex]C_{4} H_{8} O_{2}[/tex]
Explanation:
Setting up ratio:
Carbon : Hydrogen : Oxygen
2 : 4 : 1
As there are two carbon atoms, four hydrogen atoms and one oxygen atom,
therefore the formula becomes: [tex]C_{2} H_{4} O[/tex]
The Mr would be: (12 x 2) + 4 + 16
= 44 g/mol
Molecular formula:
[tex](C_{2} H_{4} O)_{n}[/tex]
n = 88/44
n = 2
Thus:
[tex](C_{2} H_{4} O)_{2}[/tex]
= [tex]C_{4} H_{8} O_{2}[/tex]
The unit of specific heat capacity is …
J/kg
J/oC
Joule
J/kg.oC
Answer:
J/kg.oC
Explanation:
The unit of specific heat capacity of a substance is J/kg*°C (joule per kilogram-degree)
consider the following gas-liquid equilibrium for an aqueous system at a constant partial pressure of n2. n2(g) n2(aq) what is the effect on the equilibrium composition of the liquid when the temperature of the liquid is increased?
On increasing the temperature, the equilibrium will shift towards the left as when we increase the temperature, the solubility of gases in the liquid decreases.
The solubility of gases depends on the temperature. When we increase the temperature of a liquid, the solubility of gases decreases. This happens because the kinetic energy of the molecules increase and the gas escapes the liquid.
N₂ (gas) ⇄ N₂ (aq)
According to the above equation, the nitrogen gas is in equilibrium with the liquid nitrogen. The equilibrium will shift to the left as the solubility will decrease and N₂ will escape from the liquid on increasing then temperature.
To know more about equilibrium here
https://brainly.com/question/12971169
#SPJ4
Students in a high school Marine Science class are learning about the scientific process. Four students were asked to write a testable prediction about deep-sea vents found in the ocean. Their responses are shown in the chart. Student Response Jin Deep-sea vents are too deep. Elizabeth Deep-sea vents are more interesting than caves. Carly Interest in deep-sea vents will decrease in the future. Raymond Ocean surface temperatures are warmer than water at deep-sea vents. Which student's prediction is the most testable using the scientific process? Jin Elizabeth Carly
The predication that is testable here is that of Raymond. Option D
What is a testable predication?We have to keep it at the back of our minds that science deals with data that is testable. In other words, science is an empirical discipline. What we mean by this is that we must be able to get at knowledge by testing the data that we have in controlled experiments.
Now, if we look at the responses of the students, we can see that the only one that has to do with something that we can test is the one that said that Ocean surface temperatures are warmer than water at deep-sea vents.
Learn more about hypothesis:https://brainly.com/question/29519577
#SPJ1
10. Suppose you have a sample of potassium. Describe several ways you could use
periodic trends and a
knowledge of valence electrons to predict the element's
reactivity and how the element will behave in a chemical bond.
Periodic patterns and knowledge of valence electrons can be used to forecast an element's reactivity and behavior in a chemical bond in a variety of ways: Electronegativity.
An element's electronegativity reflects its capacity to attract electrons in a bond. High electronegativities elements, such as fluorine, are more reactive and form stronger bonds than low electronegativities elements, such as sodium. Ionization Energy: One element's ionization energy defines the amount of energy necessary to remove an electron from the element. High ionization energies elements, such as calcium, are less reactive and less prone to form covalent connections. Valence electrons: An element's reactivity is determined by the number of valence electrons it has. Elements with a small number of valence electrons.
learn more about electrons here:
https://brainly.com/question/12001116
#SPJ4
how to determine amount of moles produced in a reaction when given the number of mols of both reactants
atroodee vastroodeee,your phone is on light modeeee
Scientists study how radioactive isotopes in rocks, such as Carbon-14, decay to
tell the age of the rock.
Explain how knowing the half-life of Carbon 14 can tell scientists the absolute
age of a rock sample.
By counting how many 1/2 lifts it has experienced, we or Scientists may determine its exact age. For each 12 lives in the case of carbon, it takes 5730 years.
What is the radioactive isotope?Carbon-14 is a radioactive isotope that is commonly used to determine the age of organic materials, such as wood, bones, and shells. It is formed in the upper atmosphere when cosmic rays interact with nitrogen atoms, and it is incorporated into living organisms through photosynthesis or ingestion. Once an organism dies, it stops taking in Carbon-14, and the isotope begins to decay at a steady rate.
The half-life of Carbon-14 is the amount of time it takes for half of the original amount of the isotope to decay. For Carbon-14, the half-life is about 5,730 years. This means that after 5,730 years, half of the Carbon-14 atoms in a sample will have decayed into Nitrogen-14.
So, Scientists can use the half-life of Carbon-14 to determine the absolute age of a rock sample by measuring the ratio of Carbon-14 to Carbon-12 in the sample. By comparing this ratio to the known decay rate of Carbon-14, scientists can calculate the amount of time that has passed since the organism died, and therefore the age of the rock sample.
Learn more about radioactive isotopes from
https://brainly.com/question/18640165
#SPJ1
The release of which substance is represented by the arrows?
The arrows depict the emission of carbon dioxide. Due to its depiction of the energy transfer from plants to animals, arrow B stands in for cellular respiration.
What group of arrows best exemplifies the respiration mechanism of cells?Due to its depiction of the energy transfer from plants to animals, arrow B stands in for cellular respiration.These organic compounds are disassembled by cells to release their energy. Those bonds are broken during cellular respiration and fermentation, converting the potential energy of organic molecules into kinetic energy that cells can use to perform tasks.There is only arrow 6 ambient oxygen (031 carbon dioxide (COz' AI The only arrows that depict the flow of atmospheric oxygen during respiration are those in positions 2 and 6.The complete question is,
What does the arrows' representation of substance release indicate? up-facing mitochondria.
To learn more about arrow refer to:
https://brainly.com/question/26060014
#SPJ1
How are coniferous trees different from deciduous trees? (Select all that apply.) BRAINLY
Coniferous trees differ from deciduous trees in that they produce cones as a mechanism of reproduction and have waxy, needle-shaped leaves to retain water. B and D are the appropriate choices as a result.
Describe deciduous trees.The blossoms on deciduous trees are big.
They are all over the planet, including oaks, maples, and beech trees.
Deciduous refers to something that falls off, and these trees lose their leaves every fall.
Deciduous trees typically have large, flat leaves.
Coniferous trees: what are they?Coniferous trees have tiny, waxy leaves that are often thin (needles or flat scales) and designed to hold onto water.
A tree that produces cones is referred to as a conifer. The most prevalent conifers are spruces, pines, and firs.
Evergreens and softwoods are other names for coniferous trees.
Broad leaves on deciduous trees turn color in the fall, and they use flowers to spread their seeds.
Coniferous trees don't change color in the fall, have needles instead of leaves, and use cones to disseminate their seeds rather than flowers.
To learn more about coniferous trees from given link
https://brainly.com/question/26280340
#SPJ1
Complete Question -
2. How are coniferous trees different from deciduous trees? (Select all that apply.)
Conifers grow berries as a means of reproducing.
Conifers grow cones as a means of reproducing.
Conifers drop their leaves in colder seasons to conserve water.
Conifers have waxy, needle-shaped leaves to retain water.
If 85.0 grams of Ca(OH)2 are used in this reaction, how many grams of water would be produced?
41.35 g
38.2 g
12.86 g
42.5 g
If 85.0 grams of Ca(OH)₂ are used in the reaction, the mass in grams of water would be produced is 20.67 g.
The correct option is not given.
How many grams of water would be produced?The mass of water produced is determined as follows:
Equation of reaction:
Ca(OH)₂ ---> CaO + H₂O
The mole ratio of the reaction shows that 1 mole of Ca(OH)₂ decomposes to yield 1 mole of CaO and 1 mole of H₂O.
Molar mass of Ca(OH)₂ = 74 g
Molar mass of H₂O = 18 g
74 g of Ca(OH)₂ decomposes to produce 18 g H₂O.
The mass of water produced from 85.0 grams of Ca(OH)₂ = 85 * 18/74
The mass of water produced from 85.0 grams of Ca(OH)₂ = 20.67 g
Learn more about mole ratio at: https://brainly.com/question/26023
#SPJ1