Answer:
1.204 x 10²⁴ atoms of oxygen in 1 mole of CO₂
Explanation:
1 mole of CO₂ contains 6.02 x 10²³ molecules of CO₂
1 molecule of CO₂ contains 2 atoms of oxygen
Therefore, Atoms of oxygen in 1 mole of CO2 => 6.02 x 10²³ molecules CO₂ x
2 atoms oxygen / molecule CO₂ = 2 X 6.02 X10²³ atoms of oxygen = 1.204x10²⁴ atoms of oxygen in 1 mole CO₂
barium chloride + sodium phosphate
Answer with double replacement
Answer:
Barium chloride + Sodium phosphate → barium phosphate + sodium chloride
Explanation:
Double replacement:
It is the reaction in which two compound exchange their ions and form new compounds.
AB + CD → AC +BD
Chemical equation:
BaCl₂ + Na₃PO₄ → Ba₃(PO₄)₂ + NaCl
Balanced chemical equation:
3BaCl₂ + 2Na₃PO₄ → Ba₃(PO₄)₂ + 6NaCl
The cation and anion of both reactants are exchanged with each other.
Ba²⁺ react with PO₄³⁻ and form Ba₃(PO₄)₂ while Cl⁻ react with Na⁺ and form sodium chloride.
Molecular equation:
Barium chloride + Sodium phosphate → barium phosphate + sodium chloride
Calculate the molar mass of a 2.89 g gas at 346 ml, a temperature of 28.3 degrees Celsius, and a pressure of 760 mmHg.
The molar mass of gas = 206.36 g/mol
Further explanationIn general, the gas equation can be written
[tex]\large{\boxed{\bold{PV=nRT}}}[/tex]
where
P = pressure, atm
V = volume, liter
n = number of moles
R = gas constant = 0.082 l.atm / mol K
T = temperature, Kelvin
mass (m)= 2.89 g
volume(V) = 346 ml = 0.346 L
T = 28.3 C + 273 = 301.3 K
P = 760 mmHg=1 atm
The molar mass (M) :
[tex]\tt PV=\dfrac{m}{M}RT\\\\M=\dfrac{mRT}{PV}\\\\M=\dfrac{2.89\times 0.082\times 301.3}{1\times 0.346}\\\\M=206.36~g/mol[/tex]
A gaseous fossil fuel produced from organic matter that is used to heat homes and cook
Answer:
Natural gas
Explanation:
Natural gas is a gaseous fossil fuel produced from organic matter that is used to heat homes and cook food.
Natural gas is one of the most volatile part of hydrocarbons that exist together with fossil fuel.
In a reservoir, natural gas is usually on top of the fossil fuel reserve. It can also be distilled from crude oil as they rises up on top of the column first due to their low boiling pointThe gas mixture is made up light hydrocarbons from methane to hexane.Which substances are subject to avogadro law?
Answer:
Avogadro's law (sometimes referred to as Avogadro's hypothesis or Avogadro's principle) is an experimental gas law relating the volume of a gas to the amount of substance of gas present.[1] The law is a specific case of the ideal gas law. A modern statement is:
Avogadro's law states that "equal volumes of all gases, at the same temperature and pressure, have the same number of molecules."[1]
For a given mass of an ideal gas, the volume and amount (moles) of the gas are directly proportional if the temperature and pressure are constant.
The law is named after Amedeo Avogadro who, in 1812,[2][3] hypothesized that two given samples of an ideal gas, of the same volume and at the same temperature and pressure, contain the same number of molecules. As an example, equal volumes of molecular hydrogen and nitrogen contain the same number of molecules when they are at the same temperature and pressure, and observe ideal gas behavior. In practice, real gases show small deviations from the ideal behavior and the law holds only approximately, but is still a useful approximation for scientists.
I hope helps you and if you want and you consider you can give me a brainly crown
The mitochondrial form of the PEPCK enzyme, with oxaloacetate as substrate, is a(n)__________enzyme for the Citric Acid Cycle
(a) inhibitory
(b) activatory
(c) anapleurotic
(d) catapleurotic
Answer:
(d) catapleurotic
Explanation:
Phosphoenolpyruvate carbokinase (PEPCK) is usually used in the conversion of oxaloacetate to phosphoenolpyruvate (an important intermediate in glycolysis and gluconeogenesis, C₃H₅O₆P). The main function of this catapleurotic enzymes is in the catalysis of the forward conversion of oxaloacetate to phosphoenolpyruvate.
In the reaction __S+3O2->2SO3 what coefficient should be placed in front of the S
to balance the reaction?
1
2
3
Answer:
i think 3
Explanation:
Answer:
Your answer Should be 2
Explanation:
because i need to flex my brain cells
How many protons, neutrons, and electrons does the following atom have?
Answer:
Option C 28 Proton 31 neutron 26 elecrtons
Explanation:
Calculate the density (in g/mL) of an object that has a mass of 3.81 g and a volume of
14.3 mL.
Answer:
Density = M/V
so 3.81/14.3 .266g/ml
Explanation:
Need help on 17,19,20 please.
Answer:
c, maybe d, and I think b.
Explanation:
Im sorry if wrong
Gaseous methane CH4 will react with gaseous oxygen O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. Suppose 0.80 g of methane is mixed with 1.92 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to 3 significant digits.
Answer:
1.08 g of water
Explanation:
The balanced chemical equation for the reaction of combustion of methane (CH₄) is the following:
CH₄(g) + 2 O₂(g) → CO₂(g) + 2 H₂O(g)
According to the equation, 1 mol of CH₄ reacts with 2 moles of O₂. We convert from mol to grams by using the molar masses:
1 mol CH₄ = (1 x 12 g/mol) + (4 x 1 g/mol) = 16 g
2 mol O₂ = 2 x (2 x 16 g/mol) = 64 g
2 mol H₂O = 2 x ((2 x 1 g/mol) + 16 g/mol)= 36 g
From the masses of reactants (CH₄ and O₂), we can see that the stoichiometric ratio is 64 g O₂/16 g CH₄ = 4.
First, we have to identify which reactant is the limiting reactant. We can compare the stoichiometric ratio with the actual reactants ratio (the masses of reactants we have):
1.92 g O₂/0.80 g CH₄ = 2.4
As 4>2.4, we can conclude that O₂ is the limiting reactant.
Now, we consider the stoichiometric ratio between the limiting reactant (64 g O₂) and the product we have to calculate (36 g H₂O), and we multiply the ratio by the actual mass of O₂:
1.92 g O₂ x 36 g H₂O/64 g O₂ = 1.08 g
Therefore, 1.08 g of H₂O will be produced by the chemical reaction of 0.80 g of methane with 1.92 g of oxygen.
what are the answers easily!!!!
Answer:
True
True
Temperature
Explanation:
A combination of any elements bonded together
Answer:
are called Compounds
Answer:
Compouds
think of a group
an they are alll combined
also "compounds" com-bind = com-POUNDS
Make's sense now?
Please help me I need these answers
Answer:
Q8) True
Q9) First ionization energy
Q10) A metal oxide
Explanation:
One of the properties of group one elements (alkali metals) is that they combine with water to form basic solutions. E.g 2Na(s)+2H2O(l)→2NaOH(aq)+H2(g).
An inverse relationship exists between the distance of the outermost electron in the atom from the nucleus and the first ionization energy. As the distance between the outermost electron and the nucleus in group 17 elements increases, their first ionization energies decreases accordingly.
Group 1 elements react with oxygen to yield the corresponding metal oxides. E.g 4 Na + O2 --> 2 Na2O
If a truck's tires are filled to a pressure of 2.38 atm when they are 25.0
degrees Celsius, what would their pressure be, if the temperature of the
tire goes up to 52.78 degrees Celsius after driving on the highway.
Answer:
P₂ = 2.60 atm
Explanation:
Given data:
Initial pressure = 2.38 atm
Initial temperature = 25.0 °C
Final pressure = ?
Final temperature = 52.78°C
Solution:
Initial temperature = 25.0 °C (25.0+273 = 298 K)
Final temperature = 52.78°C (52.78+273 = 325.78 K)
According to Gay-Lussac Law,
The pressure of given amount of a gas is directly proportional to its temperature at constant volume and number of moles.
Mathematical relationship:
P₁/T₁ = P₂/T₂
Now we will put the values in formula:
2.38 atm / 298 K = P₂/325.78 K
P₂ = 2.38 atm × 325.78 K / 298 K
P₂ = 775.35 atm. K /293 K
P₂ = 2.60 atm
Ionic compounds can conduct electricity when dissolved in water due to the presence of free floating ions.
True or False
Answer:
True
Explanation:
When 35.0 mL of 0.400 M hydrochloric acid and 35.0 mL of 0.400 M sodium hypochlorite are combined, the pH of the resulting solution will be :
Answer:
pH = 7.49
Explanation:
This is a buffer solution. We can apply Henderson Hasselbach equation:
pH = pKa + log ((total mmoles - mmoles HCl) / mmoles HCl)
We have the same amount of mmoles.
35 mL . 0.400 M = 14 mmoles HCl
35 mL . 0.400 M = 14 mmoles NaClO
Total moles are 28 mmoles.
We replace data:
pH = pKa + log ((28 mmoles -14 mmoles) / 14 mmoles)
Notice that the relation in log = 1. So pH = pKa
pKa for HClO is 7.49
When pH = pKa we have the same amount of base and acid. Notice, that we have the same mmoles of HCl and NaClO.
Remember that a buffer can be prepared with:
a) A weak acid and its conjugate base (acetic /acetate)
A weak base and its conjugate acid (ammonia/ammonium)
b) A weak acid with a strong base, where the acid can be in excess.
c) A conjugate base (salt from weak acid) with a strong acid, where the base can be in excess. (This case but, the base is not in excess, that's why ph = pKa)
2H2O(l)2H2(g) O2(g) Using standard thermodynamic data at 298K, calculate the entropy change for the surroundings when 2.03 moles of H2O(l) react at standard conditions.
Answer:
The correct answer is -1946.89 j/K.
Explanation:
The reaction is:
2H2O (l) ⇔ 2H2 (g) + O2(g)
First there is a need to find dHfrxn = dHf(Products) - dHf(reactants)
With the help of standard thermodynamic table, the values of dHf can be obtained,
dHf(H2O) = -285.8 kJ/mol
dHf(H2) = 0 kJ/mol
dHf(O2) = 0 kJ/mol
dHrxn = 2 × dHf (H2) + dHf(O2) - 2 × dHf(H2O)
= 2 × 0 + 0-2 × (-285.8) kJ = +571.6 kJ
This value is for 2 moles of H2O, for 2.03 moles of H2O, the value will be,
dHrxn = +571.6 kJ/2 mol × 2.03 mol
= 580.174 kJ
The given temperature is 298 K.
So, the value of dSsurr = -dHrxn/T
= -580.174kJ/298 K
= -580174 j/298K
= -1946.89 j/K
If bovine haemoglobin has an extinction coefficient of 30910 L mol-1 cm-1 at 570 nm in PBS, what is the concentration of a solution reading an absorbance of 0.7?
hey sisterrrrrrrrrr its ginger charles here i hear you looking for the answer well this is your lucky day the answer is
Explanation:
The concentration of Bovine Hb with absorbance 0.7 at 570 nm has been 2.264 [tex]\mu[/tex]M.
According to Beer's law, the absorbance of the sample can be given by:
Absorbance = Extinction coefficient [tex]\rm \times[/tex] concentration [tex]\times[/tex] path length
The Bovine Hb has the extinction coefficient = 30910 L/mol/cm
The absorbance = 0.7
The path length has been 1 cm.
The concentration of the Bovine Hb can be given as:
0.7 = 30910 [tex]\times[/tex] concentration [tex]\times[/tex] 1
The concentration of Bovine Hb = 2.264 [tex]\rm \times\;10^-^6[/tex] moles/L
The concentration of Bovine Hb = 2.264 [tex]\rm \mu[/tex]moles/L
The concentration of Bovine Hb = 2.264 [tex]\mu[/tex]M.
For more information about the concentration on the basis of absorbance, refer to the link:
https://brainly.com/question/23019109
An object on top of a building has a GPE of 23,048j and a mass of 39kg, What is the height of the object
Answer:
59.1 mExplanation:
The height of the object can be found by using the formula
[tex]h = \frac{p}{mg } \\ [/tex]
where
p is the potential energy
m is the mass
h is the height
g is the acceleration due to gravity which is 10 m/s²
From the question we have
[tex]h = \frac{23048}{39 \times 10} = \frac{23048}{390} \\ = 59.0974...[/tex]
We have the final answer as
59.1 mHope this helps you
How many molecules are in 6.00 mol He?
HELP!!!!!
Name the group of elements that will not participate in ionic bonding.
Alkali Metals
Alkaline Earth Metals
Transition Metals
Halogens
Noble Gases
Answer:
Noble Gases
Explanation:
Noble gases are very unreactive because they already have a full valence shell and therefore, do not need to bond.
Answer:
Noble gases
Explanation:
An unknown metal with a mass of 8.5 g was heated in boiling water to a temperature of 100°C. The metal was immediately transferred to an insulated cup containing 50.0 g of water at 22°C. At equilibrium (when the temperature became constant) the temperature of the system was 23.2°C. Calculate the specific heat of the metal and determine its identity. Explain how you arrived at your conclusion. You must show your work to receive credit for your answer.
The specific heat of the metal : 0.384 J/g° C,
and a metal with a specific heat of 0.384 is copper
Further explanationThe law of conservation of energy can be applied to heat changes, i.e. the heat received / absorbed is the same as the heat released
Q in = Q out
Q lost(metal) = Q gained(water)
Heat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
[tex]\tt Q~metal=Q~water\\\\8.5\times c\times (100-23.2)=50\times 4.18\times(23.2-22)\\\\652.8\times c=250.8\Rightarrow c=\dfrac{250.8}{652.8}=0.384~J/g^oC[/tex]
What is the percent composition of nitrogen in sodium nitride
Answer:
16.86%
Explanation:
Na3N is sodium nitride.
% of N = mass of N/ molar mass of Na3N *100
% of N = 14/83*100= 16.86%
The percent composition of nitrogen in sodium nitride is 16.86%
What is sodium nitride?Sodium nitride is an inorganic compound that is used in preservatives and antidote for cyanide poisoning.
The molar mass of Na3N is 83 M
The mass of Na3N is 14 g
[tex]% \;of \;N = \dfrac{mass of N}{ molar mass of Na3N } \times 100[/tex]
[tex]\% \;of \;N = \dfrac{mass\; of \;N}{molar\; mass\; of\; Na3N} \times 100\\\\\\\% \;of \;N = \dfrac{14}{83} \times 100 = 16.86\%[/tex]
Thus, the percent composition of nitrogen in sodium nitride is 16.86%.
Learn more about sodium nitride
https://brainly.com/question/2596742
#SPJ2
What does the theory of continental drift state?
A
All the continents were once one continent that broke up and drifted apart over hundreds of millions of years.
B
The continents have always been separate but may one day drift together to form a single continent.
C
The layout of the continents is the same today as it has always been.
D
New continents are continually being created and destroyed.
When discussing distances between the solar system, which term do we use
A. Actual distance
B. Relative Brightness
D. Realtive distance
If its right you get brainless
I'm in 5th grade
Identify the intermediate leads to the major product for the reaction of 2-methyl-2-butene with hydrogen bromide in the presence of peroxide.
Answer:
II
Explanation:
We must have a good idea of the fact that there are two mechanisms that come into play when we are discussing about the addition of hydrogen halides to alkenes. The first is the ionic mechanism and the second is the radical mechanism.
The ionic mechanism is accounted for by the Markovnikov rule while the radical mechanism occurs in the presence of peroxides and is generally referred to as anti Markovnikov addition.
The intermediate in anti Markovnikov addition involves the most stable radical, in this case, it is a tertiary radical as shown in the images attached. The most stable radical is II hence it leads to the major product shown in the other image.
Which of these best explains why Earth's tectonic plates move?
b
Convection currents in the asthenosphere make fluid particles move.
Cooling causes contraction and shifting of the fluid particles in the lithosphere.
Cooling causes expansion and shifting of the fluid particles in the asthenosphere
d
Convection currents in the lithosphere make fluids move in a circular motion
Answer:
Cooling causes contraction and shifting of the fluid particles in the lithosphere.
Answer:
The 2 answer
Explanation:
Calcium carbonate is a white mineral. A chemist heats calcium carbonate, CaCO3, to produce carbon dioxide, CO2, and a white powder, CaO. The following chemical equation shows the reaction.CaCO3 → CO2 + CaO Explain why the products have different properties than the reactants
Answer:
A chemical change has occurred
Explanation:
Given reaction expression:
CaCO₃ → CaO + CO₂
The reaction is a decomposition reaction in which a compound is dissociated into simple products.
The reason why the products have different properties than the reactants is because a chemical change has occurred.
A chemical change is accompanied by the formation of a new productSuch new products have different properties compared to the compound that forms them. Therefore, the products and reactants are different chemically due to chemical change that has occurred.The products of the decomposition of calcium carbonate have different properties because a chemical change has occured in the reaction to form new substances.
CHEMICAL CHANGE:A chemical change is a type of change in which new products are formed. The bonds of the reactants are broken and rearranged to form entirely new substances. According to this question, calcium carbonate is a white mineral, which when heated produces carbon dioxide, CO2, and a white powder, CaO as follows: CaCO3 → CO2 + CaOThe products in this reaction are different in their properties from the reactants because a chemical change has caused new substances to be formed.Learn more about chemical change at: https://brainly.com/question/1161517?referrer=searchResults
Answer rrrrrrrrr....
Answer:
The answer is "Option b".
Explanation:
[tex]\to \text{number of moles} = \frac{\text{number of atoms}}{\text{avogadro number}}[/tex]
[tex]= \frac{7.0 \times 10^{19}}{6.0221 \times 10^{23}}\\\\= 1.16 \times 10^{-4} \ moles\\\\ =1.2 \times 10^{-4} \ moles[/tex]
[tex]\to \text{sample mass}= \text{number of moles} \times \text{molar mass}[/tex]
[tex]=1.16 \times 10^{-4}\times 58.9\\\\=0.00685 \\\\ = 6.85\ g[/tex]
rap music to hype up on bus to game
Answer:
Ram Ranch
Explanation:
Answer: FLEXUP by lil yacthy and future and playboi carti one of the best songs right now
Explanation: