Answer:
Neon molecule does not exist.
Explanation:
Neon is denoted by Ne which is noble gas. According to the "Molecular Orbital Theory", only those molecules exist that have a positive bond order and molecules with no bond or negative bond order cannot exist.
Philosophy ultimately seeks to discover ultimate truth
True or false
Answer:
True
Explanation:
Phislosophy does not accept something even though it is a khown fact unless it can proves it's true .
Descartes sais that in philosophy we must doubt the facts we khow , we must start from the beginning to reach the truth
many cars are fitted with airbags which inflate in an accident. Airbags contain solid sodium azide, NaN₃, which decomposes rapidly to form sodium and nitrogen. The nitrogen formed fills the air bags. Can someone please solve part b and c. I'll mark brainliest to whoever gets it right!
What effect does temperature have on reaction rate?
Answer:
Increasing the temperature increases reaction rates because of the disproportionately large increase in the number of high energy collisions.
Explanation:
Hope this helps :)
Only a small fraction of a weak acid ionizes in aqueous solution. What is the percent ionization of a 0.100-M solution of acetic acid, CH3CO2H? CH3CO2H(aq)+H2O(l)⇌H3O+(aq)+CH3CO2−(aq )Ka=1.8×10−5
Answer:
1.33%
Explanation:
In an aqueous solution, a weak acid such as acetic acid, will be in equilibrium with its conjugate base, acetate ion, thus:
CH₃CO₂H(aq) + H₂O(l) ⇌ H₃O⁺(aq) + CH₃CO₂⁻(aq )
Where dissociation constant, ka, is defined as the ratio of concentrations of products and reactants:
Ka = 1.8x10⁻⁵ = [H₃O⁺] [CH₃CO₂⁻] / [CH₃CO₂H]
H₂O is not taken into account in the equilibrium because is a pure liquid
When a solution of acetic acid becomes to equilibrium, the original concentration of the acid decreases producing more H₃O⁺ and CH₃CO₂⁻.
The concentrations at equilibrium when a 0.100M solution of acetic acid reaches this state, is:
[CH₃CO₂H] = 0.100M - X
[H₃O⁺] = X
[CH₃CO₂⁻] = X
Where X is reaction coordinate.
Replacing in Ka expression:
1.8x10⁻⁵ = [H₃O⁺] [CH₃CO₂⁻] / [CH₃CO₂H]
1.8x10⁻⁵ = [X] [X] / [0.100M - X]
1.8x10⁻⁶ - 1.8x10⁻⁵X = X²
1.8x10⁻⁶ - 1.8x10⁻⁵X - X² = 0
Solving for X:
X = -0.00135 → False solution. There is no negative concentrations.
X = 0.00133 → Right solution.
That means concentration of acetate ion is:
[CH₃CO₂⁻] = 0.00133M.
Now, percent ionization is defined as 100 times the ratio between weak acid that is ionizated, [CH₃CO₂⁻] = 0.00133M, per initial concentration of the acid, [CH₃CO₂H] = 0.100M. Replacing:
% Ionization = 0.00133M / 0.100M × 100 =
1.33%
why must we do the a lot of quantity urine
Answer:
because
ExplanatioN:
BeCaUsE
Which of the following has the highest electromagnivity
Answer:
Where are the answer choices
?
What makes metals, in particular, good conductors of electricity?
Answer:
In metals, the outer electrons of the atoms belong to a 'cloud' of delocalised electrons. They are no longer firmly held by a specific atom, but instead they can move freely through the lattice of positive metal ions, these factors makes them a good conductor of electricity .
Which property of the isotopes must be different?
A) The atomic number
B) The electric charge
C) The element name
D) The mass number
When backpacking in the wilderness, hikers often boil water to sterilize it for drinking. Suppose that you are planning a backpacking trip and will need to boil 35 L of water for your group. What volume of fuel should you bring? Assume that the fuel has an average formula of C7 H16 , 15% of the heat generated from combustion goes to heat the water (the rest is lost to the surroundings), the density of the fuel is 0.78 g>mL, the initial temperature of the water is 25.0 °C, and the standard enthalpy of formation of C7 H 16 is -224.4 kJ>mol.
Answer:
2.104 L fuel
Explanation:
Given that:
Volume of water = 35 L = 35 × 10³ mL
initial temperature of water = 25.0 ° C
The amount of heat needed to boil water at this temperature can be calculated by using the formula:
[tex]q_{boiling} = mc \Delta T[/tex]
where
specific heat of water c= 4.18 J/g° C
[tex]q_{boiling} = 35 \times 10^{3} \times \dfrac{1.00 \ g}{1 \ mL} \times 4.18 \ J/g^0 C \times (100 - 25)^0 C[/tex]
[tex]q_{boiling} = 10.9725 \times 10^6 \ J[/tex]
Also; Assume that the fuel has an average formula of C7 H16 and 15% of the heat generated from combustion goes to heat the water;
thus the heat of combustion can be determined via the expression
[tex]q_{combustion} =- \dfrac{q_{boiling}}{0.15}[/tex]
[tex]q_{combustion} =- \dfrac{10.9725 \times 10^6 J}{0.15}[/tex]
[tex]q_{combustion} = -7.315 \times 10^{7} \ J[/tex]
[tex]q_{combustion} = -7.315 \times 10^{4} \ kJ[/tex]
For heptane; the equation for its combustion reaction can be written as:
[tex]C_7H_{16} + 11O_{2(g)} -----> 7CO_{2(g)}+ 8H_2O_{(g)}[/tex]
The standard enthalpies of the products and the reactants are:
[tex]\Delta H _f \ CO_{2(g)} = -393.5 kJ/mol[/tex]
[tex]\Delta H _f \ H_2O_{(g)} = -242 kJ/mol[/tex]
[tex]\Delta H _f \ C_7H_{16 }_{(g)} = -224.4 kJ/mol[/tex]
[tex]\Delta H _f \ O_{2{(g)}} = 0 kJ/mol[/tex]
Therefore; the standard enthalpy for this combustion reaction is:
[tex]\Delta H ^0= \sum n_p\Delta H^0_{f(products)}- \sum n_r\Delta H^0_{f(reactants)}[/tex]
[tex]\Delta H^0 =( 7 \ mol ( -393.5 \ kJ/mol) + 8 \ mol (-242 \ kJ/mol) -1 \ mol( -224.4 \ kJ/mol) - 11 \ mol (0 \ kJ/mol))[/tex]
[tex]\Delta H^0 = (-2754.5 \ \ kJ - 1936 \ \ kJ+224.4 \ \ kJ+0 \ \ kJ)[/tex]
[tex]\Delta H^0 = -4466.1 \ kJ[/tex]
This simply implies that the amount of heat released from 1 mol of C7H16 = 4466.1 kJ
However the number of moles of fuel required to burn [tex]7.315 \times 10^{4} \ kJ[/tex] heat released is:
[tex]n_{fuel} = \dfrac{q}{\Delta \ H^0}[/tex]
[tex]n_{fuel} = \dfrac{-7.315 \times 10^{4} \ kJ}{-4466.1 \ kJ}[/tex]
[tex]n_{fuel} = 16.38 \ mol \ of \ C_7 H_{16[/tex]
Since number of moles = mass/molar mass
The mass of the fuel is:
[tex]m_{fuel } = 16.38 mol \times 100.198 \ g/mol}[/tex]
[tex]m_{fuel } = 1.641 \times 10^{3} \ g[/tex]
Given that the density of the fuel is = 0.78 g/mL
and we know that :
density = mass/volume
therefore making volume the subject of the formula in order to determine the volume of the fuel ; we have
volume of the fuel = mass of the fuel / density of the fuel
volume of the fuel = [tex]\dfrac{1.641 \times 10^3 \ g }{0.78 g/mL} \times \dfrac{L}{10^3 \ mL}[/tex]
volume of the fuel = 2.104 L fuel
Element Y has 8 shells.
The first three successive ionisation energies for element y increase gradually but the 4th ionisation energy increases sharply.
a)write electronic configuration for
elment Y & explain.
Answer:
electronic configuration of Y is 1s²2s²2p⁶3s²3px²3py²3pz¹
Explanation:
The electronic structure of chlorine is 1s²2s²2p⁶3s²3px²3py²3pz¹. The first two electrons are coming from pairs in the 3p levels and are therefore rather easier to remove than if they were unpaired
little help plz? Determine which of the following is the correct equilibrium expression for the chemical reaction: Answer choices are below.
Answer:
Kc = [CaO] [O2] / [CaCO3]
Explanation:
Equilibrium constant, Kc is simply defined as the ratio of the concentration of products raised to their coefficient to the concentration of the reactants raised to their coefficient.
Thus, we can write the equation for the equilibrium constant, Kc for the reaction given in the question above as follow:
CaCO3(s) <==> CaO(s) + O2(g)
Kc = [CaO] [O2] / [CaCO3]
explain with the help of Balanced equation how precipitation reaction are used for identifying the positive radicals in three different salts each having a different positive ion
Answer:
The balanced equation related to them is given below.
Explanations:
Precipitation involves the reaction that occurs in acidic suspension as charged particles (two) come together to generate other unfixable or unsolvable salts which are known as that of the precipitate.A specific method of describing a reaction from precipitation becomes recognized as that of the binary ionic formula. Throughout this scenario, certain spectator ions being generally left out from under the calculation.The reaction will be:
⇒ [tex]Ag+(aq) + Cl^-(aq) \rightarrow AgCl (s)[/tex]
CAn someone help me and give me an example of a process that you notice or use each day that obyes the law of conservation of mass and explain how this process work??? please answer I need a new example not burning fire or candle or paper different helppppppppppppppppppppppppppppppppppppppppp
Answer:
photosynthesis maybe
Explanation:
bare with me i may be wrong or i may be right it's been a while since i've been in a chem classroom. so basically during photosynthesis a plant is taking the energy from the sun, H2O, and CO2, this ends up being like 6CO2 + 6H20 + (energy), and it converts this energy to glucose (→ C6H12O6 + 6O2 ) so the energy is never used up in this process it is merely changed. i don't really know but i hope it at least helps some
Determine which elements or compounds are products in the follow reaction equation: C+H2+O2→C6H12O2
Answer:
C6H12O6 is the product.
Explanation:
As C6H12O6 is on the right side of the arrow, it indicates that C, H2, and O2 are all reacting with each other to produce (or form) C6H12O6. This means that C6H12O6 is the product in this specific reaction.
[tex]C_6H_{12}O_6[/tex] is the product where 6 carbon, 12 hydrogens and 6 oxygen are there.
What are elements?Elements are the simplest substances which cannot be broken down using chemical methods.
As [tex]C_6H_{12}O_6[/tex] is on the right side of the arrow, it indicates that C, [tex]H_2[/tex], and [tex]O_2[/tex] are all reacting with each other to produce (or form) [tex]C_6H_{12}O_6[/tex]. This means that [tex]C_6H_{12}O_6[/tex] is the product in this specific reaction:
[tex]C+H_2+O_2[/tex] → [tex]C_6H_{12}O_2[/tex]
Learn more about elements here:
brainly.com/question/1896898
#SPJ5
74.7 g of Calcium Chlorate = __mol
Answer:
747 mol.
Explanation:
What is an exothermic reaction? Combustion of fuel is an exothermic process. Explain why by providing an example of a fuel. Give 3 examples of readily observable reactions that are considered exothermic. In each example, describe the reactants and the products.
Answer:
An exothermic reaction is a chemical reaction in which energy is given out to the surroundings in the form of heat or light or even sound.
Other explanations are given below.
Explanation:
An exothermic reaction is a chemical reaction in which energy is given out to the surroundings in the form of heat or light or even sound. In exothermic reactions, the energy content of the products are lower than that of the reactants and this excess energy is therefore released as the reaction proceeds towards formation of products.
Combustion of fuel is an exothermic reaction because the process involves the release of energy in the form of heat and light to the surroundings as the reactants (usually a fuel and oxygen) which are at a higher energy state combine to give the products which are at a lower energy state (usually CO₂ and water).
An example of a fuel is the gas propane found in cooking gas. It combines with oxygen found in air to produce the heat that is used to cook our foods.
Other examples of exothermic reactions include
1.Lighting firewood: In this process, wood which is a mixture of gaseous fuels like methane and solid fuel like charcoal combine with oxygen found in air to produce carbon (iv) oxide and water vapor while releasing heating the process.
2. Lighting a match: The head of safety matches are made of potassium chlorate, mixed with sulfur, fillers and glass powder. The side of the box contains red phosphorus, binder and powdered glass. When the match is struck, the friction generates heat which causes a small amount of red phosphorus to be converted to white phosphorus, which then ignites spontaneously in air. The heat produced initiates the decomposition of potassium chlorate to give oxygen and potassium chloride. The sulfur catches fire and ignites the wood which also burns in the air to release carbon (iv) oxide an water.
3. Burning of coal: Coal is solid carbon which combines with oxygen in air when ignited to produce carbon (iv) oxide and water vapor while also releasing heat and light energy.
Calculate the number of grams of HNO3 which must be added to 31.5 g of H20 to prepare a 0.950 m solution.
Answer:
1.89g of HNO3
Explanation:
Data obtained from the question include:
Mass of water = 31.5 g
Molality of HNO3 = 0.950 m
Mass of HNO3 =.?
Next, we shall determine the number of mole of HNO3 in the solution.
Mass of water = 31.5 g = 31.5/1000 = 0.0315 Kg
Molality of HNO3 = 0.950 m
Number of mole of HNO3 =..?
Molality is simply defined as the mole of solute per unit kilogram of solvent (water) i.e
Molality = mole /kg of water
With the above formula, the mole of HNO3 can be obtained as follow:
Molality = mole /kg of water
0.950 = mole of HNO3 /0.0315
Cross multiply
Mole of HNO3 = 0.950 x 0.0315
Mole of HNO3 = 0.03 mole
Finally, we shall convert 0.03 mole of HNO3 to grams. This is illustrated below:
Molar mass of HNO3 = 1 + 14 + (16x3) = 63g/mol
Mole of HNO3 = 0.03 mole
Mass of HNO3 =..?
Mole = mass /molar mass
0.03 = mass of HNO3 /63
Cross multiply
Mass of HNO3 = 0.03 x 63
Mass of HNO3 = 1.89g
Therefore, 1.89g of HNO3 is needed to prepare the solution.
What are the periodic trends of ionic radii? Check all that apply. Ionic radii tend to increase down a group. Ionic radii tend to decrease across a period. Anionic radii tend to increase across a period. Cationic radii tend to decrease across a period. Ionic radii increase when switching from cations to anions in a period.
Answer:
What are the periodic trends of ionic radii? Check all that apply.
*Ionic radii tend to increase down a group.
Ionic radii tend to decrease across a period.
Anionic radii tend to increase across a period.
*Cationic radii tend to decrease across a period.
*Ionic radii increase when switching from cations to anions in a period.
Answer:
- Ionic Radii Tend To Increase Down A Group.
- Cationic Radii Tend To Decrease Across A Period.
- Ionic Radii Increase When Switching From Cations To Anions In A Period.
Explanation:
i got it correct on edge
Which of the following is a correct observation when water is added to quick lime?
A .Vigorous bubbling and a hissing sound both.
B .Slow bubbling with no sound.
C .Vigorous bubbling with evolution of heat and a hissing sound.
D. No change.
Answer:
c
Explanation:
thw observation of water that is added
Gold and Platinum are found in free state in nature-Give reason.
what is the volume occupied by 4 grams of oxygen at room temperature
Answer:
volume of O2 = 3000cm³
Explanation:
no. of moles= mass of oxygen (g)/molar mass of oxygen(g/mol)
= 4/32
=0.125
volume of oxygen= no. of moles × 24000 cm³ (or 24dm³)
= 0.125 × 24000 cm³
=3000cm³ (or 3dm³)
Write the state symbol for chlorine at room temperature.
Cl2 (___)
Explanation:
The element " chlorine" is a yellowish-green gas at room temperature
The state symbol for Chlorine at room temperature is (g). It has been present in the gaseous state at room temperature.
Chlorine has been a halogen element with an atomic number 17. The element has 7 valence electrons that made it acquire 1 electron in order to attain the stable noble gas configuration. Hence, Chlorine has been a reactive element.
The chlorine has been present as a diatomic molecule at room temperature. It has nonpolar covalent bonds. The melting and boiling point of an element decides the state of the element. The chlorine has been a simpler molecule and is present in the gaseous state at room temperature.
For more information about the chlorine, refer to the link:
https://brainly.com/question/14962130
Magnesium reacts with fluorine to form magnesium fluoride. Which diagram shows the correct arrangement of electrons in the product?
Answer:
Diagram B shows the correct arrangement of electrons in the product.
Magnesium reacts with fluorine to form magnesium fluoride two electrons of magnesium are transferred to the 2 atoms of fluorine and fluorine is the most electronegative element of the periodic table. Option C is correct.
What is electronegativity?Electronegativity is the tendency or power of an atom to attract the electrons from the metals they are mostly nonmetals and want to complete their octave too.
The most electronegative elements of the periodic table are oxygen, nitrogen, and fluorine, as they are always willing to complete the octave, and fluorine will take electrons from magnesium.
Therefore, Option C is correct if the 2 atoms of fluorine and fluorine are the most electronegative element of the periodic table. Magnesium reacts with fluorine to form magnesium fluoride two electrons of magnesium are transferred.
Learn more about electronegativity, here:
https://brainly.com/question/17762711
#SPJ6
What did the photoelectric experiment demonstrate?
A. Light can heat metal enough to produce electricity.
B. Light can deposit electrons on a metal surface.
C. Light can cause electrons to be released from the surface of a
metal.
D. Light can make metal atoms move around, producing electricity.
ASAP!!!!
Answer: C. Light can cause electrons to be released from the surface of a metal
Explanation:
select all the correct answers. Which conditions are required for nuclear fusion to begin? The gas cloud must be very dense. Gravitational attraction must stop. Atoms must be stripped of their electrons. Helium atoms must break down into hydrogen. Temperatures must exceed 14 million Kelvin.
Answer:
The gas cloud must be very dense.Temperatures must exceed 14 million Kelvin
Nuclear fusion is the process in which atomic nuclei come together to form heavier nuclei, releasing large amounts of energy in the process. The correct statements are The gas cloud must be very dense, Atoms must be stripped of their electrons, and Temperatures must exceed 14 million Kelvin.
For fusion to occur, certain conditions must be met. The gas cloud or plasma must be dense enough to allow for a sufficient number of collisions between atomic nuclei. Gravitational attraction, on the other hand, is necessary to bring the atomic nuclei close enough together for the strong nuclear force to overcome the electrostatic repulsion between positively charged nuclei.
Atoms must be stripped of their electrons because, in a plasma state, the atoms are ionized, meaning they have lost or gained electrons and exist as charged particles.
Hence, the correct statements are The gas cloud must be very dense, Atoms must be stripped of their electrons, and Temperatures must exceed 14 million Kelvin.
Learn more about nuclear fusion here:
https://brainly.com/question/14019172
#SPJ 2
0.035 moles of a compound are found in an erlen meyer flask. Determine its mass molecular weight of the compound if the mass is 3.5 g.
Answer:
100
Explanation:
M = mass/ number of mole
M = 3.5 g/0.035 mol = 100 g/mol - molar mass
Aqueous hydrobromic acid will react with solid sodium hydroxide to produce aqueous sodium bromide and liquid water . Suppose 34. g of hydrobromic acid is mixed with 11.4 g of sodium hydroxide. Calculate the maximum mass of water that could be produced by the chemical reaction
Answer:
5.13g of H2O.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
HBr(aq) + NaOH(aq) —> NaBr(aq) + H2O(l)
Next, we shall determine the masses of HBr and NaOH that reacted and the mass of H2O produced from the balanced equation.
This is illustrated below:
Molar mass of HBr = 1 + 80 = = 81g/mol
Mass of HBr from the balanced equation = 1 x 81 = 81g
Molar mass of NaOH = 23 + 16 + 1 = 40g/mol
Mass of NaOH from the balanced equation = 1 x 40 = 40g
Molar mass of H2O = (2x1) + 16 = 18g/mol
Mass of H2O from the balanced equation = 1 x 18 = 18g
Thus, from the balanced equation above,
81g of HBr reacted with 40g of NaOH to produce 18g of H2O.
Next, we shall determine the limiting reactant. This is illustrated below:
From the balanced equation above,
81g of HBr reacted with 40g of NaOH.
Therefore, 34g of HBr will react with = (34 x 40)/81 = 16.79g of NaOH.
From the calculations made above, we can see that it will take a higher mass (i.e 16.79g) of NaOH than what was given (i.e 11.4g) to react completely with 34g of HBr.
Therefore, NaOH is the limiting reactant and HBr is the excess react.
Finally, we can determine the maximum mass of H2O produced as shown below.
In this case the limiting reactant will used because it will produce the maximum mass of H2O since all of it is consumed in the reaction.
The limiting reactant is NaOH and the maximum mass of H2O produced can be obtained as follow:
From the balanced equation above,
40g of NaOH reacted to produce 18g of H2O.
Therefore, 11.4g of NaOH will react to produce = (11.4 x 18)/40 = 5.13g of H2O.
Therefore, the maximum mass of H2O produced from the reaction is 5.13g.
Simplify :: 3/8 + 7/2 + (-3/5) + 9/8 + (-3/2) + 6/5
Answer:
4.1/ [tex]\frac{41}{10}[/tex]
Explanation
Do the calculation carefully because this calculation has negative term.
I hope you will understand.
3/8 + 7/2 + (-3/5) + 9/8 + (-3/2) + 6/5
31/5+(-3/5)+(-3/2)
41/10
4.1
One intresting note is that bleach has a lower measured pH than given based on its color. Why is that? (Hint: what is bleach used for)
It is used for cleaning and other use. Higher pH means stronger base.
A 0.4647-g sample of a compound known to contain only carbon, hydrogen, and oxygen was burned in oxygen to yield 0.01962 mol of CO2 and 0.01961 mol of H2O. The empirical formula of the compound was found to be C3H6O2
Answer:
The essence including its given problem is outlined in the following segment on the context..
Explanation:
The given values are:
Moles of CO₂,
x = 0.01962
Moles of water,
[tex]\frac{y}{2} =0.01961[/tex]
[tex]y=2\times 0.01961[/tex]
[tex]=0.03922[/tex]
Compound's mass,
= 0.4647 g
Let the compound's formula will be:
[tex]C_{x}H_{y}O_{z}[/tex]
Combustion's general equation will be:
⇒ [tex]C_{x}H_{y}O_{z}+x+(\frac{y}{4}-\frac{z}{2}) O_{2}=xCO_{2}+\frac{y}{2H_{2}O}[/tex]
On putting the estimated values, we get
⇒ [tex]12\times x=1\times y+16\times z=0.4647[/tex]
⇒ [tex]12\times 0.01962+1\times 0.03922+16\times z=0.4647[/tex]
⇒ [tex]0.27466+16z=0.4647[/tex]
⇒ [tex]z=0.01187[/tex]
Now,
x : y : z = [tex]0.01962:0.03922:0.01187[/tex]
= [tex]\frac{0.01962}{0.0118}:\frac{0.03922}{0.0188}:\frac{0.0188}{0.0188}[/tex]
= [tex]1.6:3.3:1.0[/tex]
= [tex]3:6:2[/tex]
So that the empirical formula seems to be "C₃H₆O₂".