Answer:
i think it wil be 567489
Explanation:
ik im right :)
How many moles are present when there are 1.00.1026 molecules of water?
Answer: 1.00×10^26=1000×10^23
1000×10^23/6.022×10^23=166.05×10^23 moles of water.
HOPE IT HELPS ☺️
PLEASE MARK AS BRAINLIEST
Explanation:
On a very hot day, could you cool your kitchen by leaving the refrigerator door open?
a. Yes, but it would be very expensive.
b. Yes, but only if the humidity is below 50%.
c. No, the refrigerator would exhaust the same amount of heat into the room as it takes out of the room.
d. No, the heat exhausted by the refrigerator into the room is more than the heat the refrigerator takes out of the room
Answer:c
Explanation:
On a very hot day, No, the refrigerator would exhaust the same amount of heat into the room as it takes out of the room.
What is refrigerator?Eliminating heat from a body but also bringing it down to the lowest temperature actually is the technique of refrigeration. The refrigeration process is carried out in refrigerators.
Therefore, keeping the doorway of an electrical refrigerator open won't help cool the room. In actuality, the refrigerator raises the temperature of the room by removing heat from the freezing compartments as well as rejecting it to the air in the room.
To know more about refrigerator.
https://brainly.com/question/13150661
#SPJ3
CH4 Structural formulas
Explanation:
Methane = CH4(formula)
Why sucrose gives negative Benedict test?
Answer:
Sucrose contains two sugars (fructose and glucose) joined by their glycosidic bond in such a way as to prevent the glucose isomerizing to aldehyde, or the fructose to α-hydroxy-ketone form. Sucrose is thus a non-reducing sugar, which does not react with Benedict's reagent.
Explanation:
Answer:
Sucrose contains two sugars (fructose and glucose) joined by their glycosidic bond in such a way as to prevent the glucose isomerizing to aldehyde, or the fructose to α-hydroxy-ketone form. Sucrose is thus a non-reducing sugar, which does not react with Benedict's reagent.
Explanation:
please give me brainlist and follow
What do melting, evaporation, and sublimation have in common?
Explanation:
Sublimation describes a solid turning directly into a gas. Melting, on the other hand, occurs when a solid turns into a liquid. Water can, under the right circumstances, sublimate, though it usually melts at temperatures above 0 degrees Celsius or 32 degrees Fahrenheit. Carbon dioxide (CO2), however, is very different. The conditions that determine whether CO2 melts or sublimates are both temperature and atmospheric pressure.
Consider the Fischer ester synthesis of methyl benzoate from benzoic acid and methanol in the presence of sulfuric acid as a catalyst. A reaction was performed in which 3.8 g of benzoic acid was reacted with excess methanol to make 2.0 g of methyl benzoate. Calculate the theoretical yield and percent yield for this reaction.
Answer:
48.8%
Explanation:
The reaction has a 1:1 mole ratio so;
Number of moles of benzoic acid reacted = mass/molar mass = 3.8 g/122.12 g/mol = 0.03 moles
So;
0.03 moles of methyl benzoate is formed in the reaction
Mass of methyl benzoate formed = 0.03 moles * 136.15 g/mol = 4.1 g
percent yield = actual yield/theoretical yield * 100/1
percent yield = 2.0 g/4.1 g * 100 = 48.8%
what prediction can i make about malaria
Answer:
A disease caused by a plasmodium parasite, transmitted by the bite of infected mosquitoes.
The severity of malaria varies based on the species of plasmodium.
Symptoms are chills, fever, and sweating, usually occurring a few weeks after being bitten.
People traveling to areas where malaria is common typically take protective drugs before, during, and after their trip. Treatment includes antimalarial drugs.
Explanation:
Which simple machine is best used to split apart an object
A. A screw
B. A lever
C. A wedge
D. A pulley
Answer:
its A screw :))) your welcome
How many levels are in the classification system?
A: 7
B: 2
C: 4
D: 6
Answer:
7
Explanation:
There are seven major levels of classification: Kingdom, Phylum, Class, Order, Family, Genus, and Species.
So, the answer is option A.
Please help on question 7 and 8, i really need help and this is for marks! I only have 9 min left i will mark brainliest to whoever gives the best answer!
Answer:
I'm going to go with conduction
Explanation:
At first I thought it was combustion but I read the problem incorrectly. It seems like the liquid boils after you put them on the hot plate.
It's most likely conduction because heat and energy is being transferred into the liquid from the hot plate
Determine if the following statements are true or false. True Standard reduction potential is an intensive property True Reduction takes place at the anode True The half reaction with the lower standard reduction potential will be at the cathode in a galvanic cell True The half reaction with the higher standard reduction potential will be at the cathode in a galvanic cell
Answer:
Standard reduction potential is an intensive property---- True
Reduction takes place at the anode ----- False
The half reaction with the lower standard reduction potential will be at the cathode in a galvanic cell ------false
The half reaction with the higher standard reduction potential will be at the cathode in a galvanic cell ------ True
Explanation:
An intensive property is a property of a substance which is inherent in it and part of its nature. It does not depend on the amount of substance present in the substance. Standard reduction potential is an intensive property.
In a galvanic cell, oxidation takes place at the anode and reduction takes place at the cathode. At the anode, the electrode potential is more negative (an oxidation) while at the cathode the reduction potential is less negative (a reduction).
Reduction potential is an intensive property of cell, reduction takes place at cathode of galvanic cell, the half reaction with the lower standard reduction potential will be at the anode in a galvanic cell and half reaction with the higher standard reduction potential will be at the cathode in a galvanic cell.
What is Galvanic cell?
Galvanic cell is also known as voltaic cell, and in this cell electric current is originated from spontaneous redox reaction.
In the galvanic cell, anode is a negatively charged electrode in which oxidation process takes place and value of electrode potential is more negative. Cathode is a positively charged electrode in which reduction process takes place and electrode potential is less negative. And intensive property is not depends on the amount of substance.
Hence, correct statements are true, false, false and true.
To know more about galvanic cell, visit the below link:
https://brainly.com/question/20487966
which type of neuron carries impulses from the brain?
Answer:
Using my searching skills, the answer is motor neurons.
Explanation:
Motor neurons carry impulses from the brain and spinal cord to muscles or glands.
does anyone know the answer to this
A student pours 800.0 mL of a 3.000 molar solution of sodium hydroxide into a 2.00 liter volumetric flask and fills the flask up with water. What is the new molarity of the solution?
5 points
12.00 M
1.20 M
14.00 M
0.0750 M
describe an example of abiotic conditions and give an example.
Answer:
Abiotic does not mean dead. It means never alive.
Examples of abiotic factors are rocks. weather
Explanation:
because
Help me please I’m struggling very bad
Answer:
Answer in explanation below!
Explanation:
Box 1 : Eukarya - this is the domain of organisms that have cells enclosed within a nuclear envelope
Box 2: Protista - any eukaryotic organism that is not an animal, plant or fungus
Box 3: Fungi - they can be single celled ( unicellular ) or multicellular
Box 4: Eubacteria - they are prokaryotic microorganisms
I hope this helps, good luck!
Answer:
I answered on the other thread! <3
Explanation:
The worst feeling is when you are hurting so badly inside but not a single tear comes out.
Anyone relate?
I know i can.
Answer:
chemistry wow
Explanation:
Aqueous hydrochloric acid HCl will react with solid sodium hydroxide NaOH to produce aqueous sodium chloride NaCl and liquid water H2O. Suppose 15.7 g of hydrochloric acid is mixed with 27. g of sodium hydroxide. Calculate the maximum mass of sodium chloride that could be produced by the chemical reaction.
Answer:
25.155 gram
Explanation:
HCl(aq.) + NaOH(aq.) ⇒ NaCl + H2O
According the above equation equal number of moles of reactant are producing same number of moles of products.
Now, no. mole of HCl = 15.7/(1+35.5) = 0.43 moles
no. of moles of NaOH = 27/(23+16+1) = 0.675 moles
Since the amount of sodium hydroxide exceeds the amount of hydrochloric acid, the maximum amount of each substance participating in the reaction is HClν ν 0.43 moles .Therefore, the maximum amount of NaCl that can be produced is as follow
= (23+35.5)×0.43 = 25.155 gram
Help plzz pick on the picture
Put the following experimental steps for the Acid-Base Equilibria (HCL and NaOH) in the correct order:
a. Perform a scout colorimetric titration. of diluted vinegar with NaOH.
b. One pair performs a careful colorimetric titration of diluted vinegar with NaOH and the other pair performs a potentiometic titration of diluted vinegar with NaOH.
c. Perform a scout colorimetric titration of HCl with NaOH.
d. One pair performs a careful colorimetric titration of HCl with NaOH and the other pair performs a potentiometic titration of HCl with NaOH.
e. Dilute a solution of commercial vinegar to prepare it for titration.
Answer:
e. Dilute a solution of commercial vinegar to prepare it for titration.
a. Perform a scout colorimetric titration of diluted vinegar with NaOH.
b. One pair performs a careful colorimetric titration of diluted vinegar with NaOH and the other pair performs a potentiometric titration of diluted vinegar with NaOH.
c. Perform a scout colorimetric titration of HCL with NaOH.
d. One pair performs a careful colorimetric titration of HCL with NaOH and the other pair performs a potentiometric titration of HCL with NaOH.
Explanation:
Titration is a process in which acid and base are introduced together to determine unknown concentration of acid or base. This is also known as neutralization reaction. The chemical process form salt and water as by products because acid molecules react with base molecules.
The experimental steps for the Acid-Base Equilibria in the correct order is e, a, b, c and d.
What is titration?Titration is a process in which we determine the concentration of any unknown acid and base by titrating them with the standard known concentration of base or acid.
In potentiometric titration, in the place of indicator potential difference is used across the analyte of electrolytic solution. And in colorimetric titration, absorbance of light is measured by the solution. Process of method which is involved in the titration is:
e. Dilute a solution of commercial vinegar to prepare it for titration.
a. Perform a scout colorimetric titration of diluted vinegar with NaOH.
b. One pair performs a careful colorimetric titration of diluted vinegar with NaOH and the other pair performs a potentiometric titration of diluted vinegar with NaOH.
c. Perform a scout colorimetric titration of HCL with NaOH.
d. One pair performs a careful colorimetric titration of HCL with NaOH and the other pair performs a potentiometric titration of HCL with NaOH.
Hence correct sequence is e, a, b, c and d.
To know more about titration, visit the below link:
https://brainly.com/question/12162076
Please help. ASAP!
What most likely happens when water loses heat?
It changes into ice.
It changes into vapor.
Its temperature increases.
Its temperature remains constant.
Answer:
It changes into ice.
Explanation:
solid form of water. When water vapor in the atmosphere cools down, it will condense and change back into liquid water, forming clouds
Answer:
It changes into ice,
Explanation:
Because if it's hot it would melt or evaporate, but if it's LOSING heat it would mean the opposite, and the only one that supports this is that "it changes into ice". Hope this helped, sorry i wasn't on for some time
Compare and contrast the way energy can transfer from one object to another.
Answer:
Energy is transferred from the hotter object to the cooler one, and the difference in temperature between them decreases.Explanation
A 20.06-mL sample of hydrochloric acid solution requires 25.00 mL of 0.149 M sodium hydroxide for complete neutralization. What is the concentration of the original hydrochloric acid solution?
Answer:
The concentration of the original hydrochloric acid solution is - 0.1856 M
Explanation:
Lets calculate-:
Neutralization reaction follows dilute principle
[tex](N_1)(V_1)=(N_2)(V_2)[/tex] For titration between NaOH and HCl
[tex](M_1)(V_1)_H_C_l=(M_2)(V_2)_N_a_O_H[/tex]
Putting the given values ,
[tex]M_1\times 20.06ml=0.149M\times25.0ml[/tex]
[tex]M_1_H_C_l=\frac{0.149\times25.0}{20.06}[/tex]
= 0.1856 M
Hence , the concentration of hydrochloric acid solution is 0.1856 M.
The electron affinity of an element is positive if energy is absorbed during the process of accepting an electron and negative if energy is released during the process. Using the electron configuration of the atom or ion undergoing the addition of an electron, predict whether the electron affinity will be positive or negative for the following reactions, and classify them accordingly.
Atom or ion Electron configuration
Ne 1s22s22p6
Br 1s22s22p63s23p64s23d104p5
Na 1s22s22p63s1
Mg 1s22s22p63s2
Cl 1s22s22p63s23p6
Answer:
See explanation
Explanation:
Ne is a noble gas. It already has an octet of electrons hence, the electron affinity of neon is negative.
Br is a halogen, halogens need one electron to complete their octet. The electron affinity for bromine is negative.
Sodium is a metal that has only one electron in its outermost shell. The electron affinity of sodium is positive.
Magnesium is a metal having two electrons in its outermost shell. The electron affinity of magnesium is positive.
Chlorine is another halogen, energy is released when an electron is added to chlorine hence the electron affinity of chlorine is negative.
Is wrought iron substitutional or interstitial?
Answer:
interstitial is correct my child
Explanation:
3. Which of the following describes the author's purpose in the text? R1.6
A.
to encourage students not to think about money when they're
choosing a degree or career to pursue
B. to stress the importance of viewing college as a way to develop jobs
skills, as well as determine what is important to you
C. to discourage students from pursuing careers in business, as people
are generally dissatisfied with their lives
D. to encourage students to pursue careers that help other people, as
they are usually the most enjoyable and meaningful
Answer:
B
Explanation:
I took the assessment
Suggest two observations that would be made when rubidium is added to cold water.
Answer:
1. Rubidium metal reacts very rapidly with water to form a colorless basic solution of rubidium hydroxide (RbOH) and hydrogen gas (H2).
2. Rubidium sinks because it is less dense than water. It reacts violently and immediately, with everything leaving the container. Rubidium hydroxide solution and hydrogen are formed.
plz help me with this question
Cars rust because when metal comes into contact with water or some sort of water form, it will make the surface wet. If the metal is wet for too long, it will start to soak up the water, therefore making it rusty. The salt will also rust a car. It does this because the mix of carbon dioxide and oxygen in the salt will eat away at the car, making it rust faster. Hope this helps!
What is the molarity of a 3.00 L solution that contains 0.400 mol FeCl3?
1.20 M
0.266 M
7.50 M
0.133 M
Answer: 0.133 mol/l
Explanation: molality = concentration = 0.400 mol/3.0 l
Which factor has the greatest effect on object X remaining in its orbit?
A:The size of Earth compared to object X
B:The gravitational force between the Earth and object X
C:The gravitational force between the Sun and object X
D: The magnetic field between the Sun and object X.
Explanation:
Stop cheating and use your brains kiddos