Answer:
The first two
Wavelength is measured from crest to crest. Amplitude is from trough to crest or crest to trough
The thermite reaction ,
Fe2O3(s)+2Al(s)⟶2Fe(s)+Al2O3(s),ΔH∘=−851.5kJ/mol
is one of the most exothermic reactions known. Because the heat released is sufficient to melt the iron product, the reaction is used to weld metal under the ocean. How much heat is released per mole of Al2O3produced? How does this amount of thermal energy compare with the energy released when 2 mol of protons and 2 mol of neutrons combine to form 1 mol of alpha particles?
Answer:
Explanation:
1) The ΔH shows the heat of reaction of the reaction illustrated in the question and the negative sign shows the reaction is an exothermic reaction, meaning heat is released in this reaction. The amount of heat released in this reaction is 851.5 kilojoules per mole of Al₂O₃ produced.
2) The thermal energy of this reaction is however very low when compared to the energy released when 2 moles of protons and 2 moles of neutrons combine to form 1 mole of alpha particles. This is because, the reaction illustrated in the (1) above is a normal chemical reaction while the one that involves the protons and neutrons (as described in this section 2) is a nuclear reaction which involves large amount of energy. Nuclear reactions usually involve way larger amount of energy than ordinary chemical reactions.
A sample of gas occupies a volume of 571.5 mL at 0.944 atm and 10 oC. Determine the pressure of this sample at 1.183 L and 32 oC.
Answer:
0.491 atm
Explanation:
Initial volume V1 = 571.5 mL = 0.5715 L
Initial Pressure P1 = 0.944 atm
Initial Temperature T1 = 10 oC + 273 = 283 K (Converting to kelvin units)
Final Temperature T2 = 32 oC + 273 = 305K (Converting to kelvin units)
Final volume V2 = 1.183 L
Final Pressure P2 = ?
These parameters related by the combined gas law;
P1V1 / T1 = P2V2 / T2
Mke P2 subject of formular;
P2 = P1 V1 T2 / V2 T1
P2 = 0.944 * 0.5715 * 305 / 1.183 * 283
P2 = 0.491 atm
PLEASE HELP
This picture represents a model of:
Question 5 options:
Oxygen
Calcium
Boron
Neon
Answer:
The picture represents oxygen.
Explanation:
There are two notable ways you can figure this out:
1) Since there are eight protons, you can automatically know that you are looking for an element with an atomic number of 8. This is because the atomic number is the number of protons in an atom.
2) You can also note the number of electrons on the outer shell. These are called valence electrons. You can then see that the element has 6 valence electrons. Beginning with Lithium on the periodic table and count by ones going from left to right in period 2 of the periodic table until you get to 6. What element is that? It is indeed oxygen.
Answer:
Oxygen
Explanation:
Neons contain 8 protons and 10 ELECTRONS
Boron contains 5 protons an 5 electrons
calcium contains 20 electrons an 0 protons
How can you increase the gravitational potential energy (GPE) of an empty shoe box on the middle shelf of a bookcase?
Answer:
Add Items to it
Explanation:
Lol I took the test. Sorry If I'm incorrect
Answer:
add items to the box to increase its mass on the self it is on
Explanation: :p
Which two factors often determine the type of rock that is formed by a process?
A.The type of material that is present at the beginning of the process
B.The amount of time the process of rock formation takes
C.The season in which the rock formation process ends
D.Whether the process takes place north or south of the equator
Answer:
A and B
Explanation:
Trust me I just did it on a p e x
Answer: he’s correct it’s d and b for me but it’s the same answers
Explanation:
Help please! I’ll give brainliest!
Calculate the percent composition of Carbon in the
compound shown below. Record your answer with two
decimal places.
C18H18010
Answer:54.82%
Explanation:
Percentage of carbon = mass of carbon in that compound/ mass of the compund *100
216/394*100 = 54.82%
What does it mean for a gene to be active?
Answer: You should be able to find the answer on the internet
Using the van der waals equation, the pressure in a 22.4 L vessel containing 1.50 mol of chlorine gas at 0.00 c is____________atm. (a= 6.49L^2-atm/mol^2, b=0.0562 L/mol)
A. 1.50
b. 0.676
c. 0.993
d. 1.48
e. 1.91
Answer:
D. 1.48atm
Explanation:
Van der waals equation is given as:
(P +an²/v²) (v - nb) = nRT
Where;
P = pressure (atm)
V = volume (L)
R = gas constant (0.0821 Latm/molK)
a and b = gas constant specific to each gas
T = temperature (K)
n = number of moles
According to the given information; V = 22.4L, T = 0.00°C (273.15K), R = 0.0821 Latm/molK, a = 6.49L^2-atm/mol^2, b = 0.0562 L/mol, n = 1.5mol
Hence;
(P + 6.49 × 1.5²/22.4²) (22.4 - 1.5×0.0562) = 1.5 × 0.0821 × 273.15
(P + 6.49 × 2.25/501.76) (22.4 - 0.0843) = 33.638
(P + 0.0291) (22.316) = 33.638
22.316P + 0.649 = 33.638
22.316P = 33.638 - 0.649
22.316P = 32.989
P = 32.989/22.316
P = 1.478
P = 1.48atm
In a chemical reaction, [_____] are the substances present after the reaction.
Answer:
Products
Explanation:
which of the following is the best definition for volume
a. solids are the only matter with volume
b. all energy has volume
c. volume is the three-dimensional size of an object
d. gases do not have volume
Answer:
C
Explanation:
I hope that helps!!! it kinda gave you the answer though
Sodium carbonate reacts with silver nitrate according to the following balanced equation: Na2CO3 (s) + 2 AgNO3 (aq) → Ag2CO3 (s) + 2 NaNO3 (9) If 3.60 g of Na2CO3 is allowed to react with 5.14 g of AgNO3, what mass of Na2CO3 will remain at the end of the reaction?
a) 2.01 g
b) 1.54 g
c) 0.423 g
d) 0.0150 g
e) 0g
Answer:
a) 2.01 g
Explanation:
Na₂CO₃ (s) + 2AgNO₃ (aq) → Ag₂CO₃ (s) + 2NaNO₃First we convert 0.0302 mol AgNO₃ to Na₂CO₃ moles, in order to calculate how many Na₂CO₃ moles reacted:
0.0302 mol AgNO₃ * [tex]\frac{1molNa_2CO_3}{2molAgNO_3}[/tex] = 0.0151 mol Na₂CO₃So the remaining Na₂CO₃ moles are:
0.0340 - 0.0151 = 0.0189 moles Na₂CO₃Finally we convert Na₂CO₃ moles into grams, using its molar mass:
0.0189 moles Na₂CO₃ * 106 g/mol = 2.003 g Na₂CO₃The closest answer is option a).
How do I cook eggs? Please tell me
What is the mass of H2SO4 in a 38.2-cm3 sample of concentrated sulfuric acid that has a density of 1.84 g/cm3 and consists of 98.3% H2SO4
Answer:
69.09 g
Explanation:
First we calculate the mass of the sample of concentrated H₂SO₄, using the given volume and density:
Mass = density * volumeMass = 1.84 g/cm³ * 38.2 cm³ = 70.288 gThere are 70.288 grams of solution, of which 98.3% is H₂SO₄. Thus the H₂SO₄ mass is:
70.288 g * 98.3/100 = 69.09 gTaking into account the definition of density and percentage by mass, the mass of H₂SO₄ in a 38.2 cm³ sample of concentrated sulfuric acid is 69.09 grams.
Definition of densityBut first you must know the definition of density. Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space.
In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance. Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
[tex]density=\frac{mass}{volume}[/tex]
Mass of solutionIn this case, you know that:
Density= 1.84 [tex]\frac{g}{cm^{3} }[/tex]
Volume= 38.2 cm³
Replacing in the definition of density:
[tex]1.84 \frac{g}{cm^{3} }=\frac{mass}{38.2 cm^{3} }[/tex]
Solving:
mass= 1.84 [tex]\frac{g}{cm^{3} }[/tex]×38.2 cm³
mass= 70.288 g
So, the mass of the solution is 70.288 grams.
Definition of percentage by massThe percentage by mass expresses the concentration and indicates the amount of mass of solute present in 100 grams of solution.
In other words, the percentage by mass of a component of the solution is defined as the ratio of the mass of the solute to the mass of the solution, expressed as a percentage.
The percentage by mass is calculated as the mass of the solute divided by the mass of the solution, the result of which is multiplied by 100 to give a percentage. This is:
[tex]percentage by mass=\frac{mass of solute}{mass of solution}x100[/tex]
Mass of H₂SO₄In this case, you know:
percentage by mass=98.3%
mass of solute= ?
mass of solution= 70.288 grams
Replacing in the definition of percentage by mass:
[tex]98.3=\frac{mass of solute}{70.288 grams}x100[/tex]
Solving:
[tex]\frac{98.3}{100} =\frac{mass of solute}{70.288 grams}[/tex]
[tex]0.983=\frac{mass of solute}{70.288 grams}[/tex]
0.983× 70.288 grams= mass of solute
69.09 grams= mass of solute
The mass of H₂SO₄ in a 38.2 cm³ sample of concentrated sulfuric acid is 69.09 grams.
Learn more about
density:
brainly.com/question/952755?referrer=searchResults
brainly.com/question/1462554?referrer=searchResults
percentage by mass:
brainly.com/question/18646836?referrer=searchResults
17. Which of the following represent the correct net ionic equations from the double replacement reaction of
calcium nitrate and potassium phosphate?
a. Caaq) + PO43- (aq) → CaPO4(s)
b. Q Ca2+ (aq) + 3 PO43- (aq) → Caz(PO4)3(S)
c. 3 Ca2+ (aq) + 2 PO.3(aq) → Caz(PO4)2(S)
d. 2 NO3(aq) + Ca2+
+ Ca(NO3)2(S)
Answer:
D. 2 NO3(aq)+Ca2+
Explanation:
Reaction of calcium nitrate and potassium phosphate produce calcium phosphate and potassium nitrate. The net ionic equation for this is written as : [tex]3 Ca^{2+} (aq) +2PO_{4} ^{3-} (aq) \rightarrow Ca_{3}(PO_{4} )_{2} (s)[/tex]. Thus option C is correct.
What is double displacement reaction?
In a double displacement reaction, two species or groups in reactant side are displaced in the products.
In a balanced chemical equation, all the reactants have to be in proper stochiometric ratio and the states of all species are mentioned in brackets.
In an ionic equation all the ions and charges are balanced both side and the number of each elements on both side too. The net ionic equation represents the formation of a solid product from its ions.
The balanced molecular equation and complete ionic equation are written for the given reaction below:
[tex]3 Ca (NO_{3})_{2} (aq)+ 2K_{3} PO_{4} (aq) \rightarrow Ca_{3}(PO_{4} )_{2} (s) + 6 KNO_{3}(aq)[/tex]
[tex]3 Ca^{2+} (aq) +6 NO_{3}^{-} + (aq)+ 6K^{+} + (aq) 2PO_{4} ^{3-} (aq) \rightarrow Ca_{3}(PO_{4} )_{2} (s) + 6 NO_{3}^{-} (aq)+ 6K^{+} (aq)[/tex]
Now when the same species on both side is cancelled, then the net ionic equation is written as:
[tex]3 Ca^{2+} (aq) +2PO_{4} ^{3-} (aq) \rightarrow Ca_{3}(PO_{4} )_{2} (s)[/tex]
Therefore, the correct et ionic equation is option c.
To learn more about ionic equations, refer the link below:
https://brainly.com/question/15467511
#SPJ2
Can someone help me with number 5:/
So to answer this question first let's decribe precision vs accuracy.
Precision in this case means exact and accurate; in this scenario all of the dots next to each other mean that it is highly precise.
Whereas Accuracy means aiming for the middle of the circle in this case. Thus the accuracy is low, but the precision is high.
TLDR: It is highly precise but not accurate.
Look up "Accuracy vs. Precision: What’s the Difference?" for a better detailed example and solution.
can someone explain this better and simpiler?
Response:
Sorry but I think you forgot to attach or include something, thanks for the points tho!
Other:
Brainliest? Thanks!
Which of thes statements about heating up land and water is true
Answer:
b its radiant energy that heats up the earth.
Explanation:
Answer:
The answer is D
Explanation:
Heat from the Earth's core and radiation from the Sun is transferred to the surface of the Earth by conduction. The warm land and water radiates infrared, some of which is absorbed by the atmosphere, adding to its thermal energy.
What is stoochiometry?
Answer:
Stoochiometry is the quantitative relation between the number of moles ( and therefore mass ) of various products and reactants in a chemical reaction.Explanation:
I hope l helped you. Please follow me. ❤❤❤explain how to convert the moles to litters and litters to moles
How do we write a formula for those combinations of atoms?
Answer:
please follow me
Explanation:
hope it helps.......
Help! What is the the correct number for the product of this particular reaction?
Answer: synthesis, decomposition, single-displacement, double-displacement, combustion and acid-base reactions.
Explanation:
3. Gasoline, coal, batteries, and logs all have chemical energy. When they burn that chemical energy will be transformed into energy.
Answer:
Thermal energy
Explanation:
When gasoline, coal, batteries and logs are all burn they transform chemical energy to thermal energy.
The chemical energy is the energy held between chemical chains and bonds within an atom.
When they combust, they release thermal energyChemical energy is a potential energy. The thermal energy is a kinetic energyIt increase the average motion of the particles in the mediumThe breaking bond when produces heat which is a form of thermal energy.What must be known for the rate constant to be calculated from the rate law?
A. The temperature at the beginning if the reaction
B. The reaction rate at known product concentrations
C. The reaction rate at known reaction concentrations
D. The activation energy the reaction must overcome
Answer:
C. The reaction rate at known reaction concentrations
Explanation:
The rate of a reaction is the measure of the speed of a chemical reaction. To find the rate constant of a reaction, the concentration of the reactants must be known.
Reaction rate is directly proportional to the concentration of the reactants. The quantitative relationship between the rate of a reaction and the concentrations of reactants is expressed as the rate law. From this we can deduce the rate constant.Answer:
C. ApE x Approved
Explanation:
Trust
Xenon tetrafluoride has two sets of lone pairs of electrons. What should be the relative positions of the two sets of lone pairs?Why?
Answer: Two equatorial positions so as to minimize the repulsion.
Explanation:
Formula used for calculating number of electrons :
[tex]\frac{1}{2}[V+N-C+A][/tex]
where,
V = number of valence electrons present in central atom = 8
N = number of monovalent atoms bonded to central atom = 4
C = charge of cation = 0
A = charge of anion = 0
Now we have to determine the hybridization of the [tex]XeF_4[/tex] molecule.
[tex]\frac{1}{2}[8+4-0+0]=6[/tex]
Bond pair electrons = 4
Lone pair electrons = 2
The number of electrons are 6 that means the hybridization will be [tex]sp^3d^2[/tex] and the electronic geometry of the molecule will be octahedral.
The molecular geometry will be square planar as two alternate positio ns will be occupied by lone pair of electrons so as to minimize the repulsion.
pls help I I alot of HELP
Answer:
They need more oxhygen to fraction to incresse
Explanation:
according to the big bang theory, which describes the universe before the actual big bang occurred?
Answer:
the answer is hot,dense points; each smaller than an atom
Explanation:
the big bang theory was proposed to suggest the expansion of the universe by describing the origin of all components of the universe and its planetary bodies. its suggested that the whole universe was in a state of high temperature and highly dense points (which were smaller than atoms) but continuously expanded by cooling down which gave rise to the formation of subatomic particles, atoms, etc.
btw I found this on brainly
A 1.00 g sample ofNH4N03 is decomposed in a bomb calorimeter. The temperature increases by 6.12 oc. What is the molar heat of decomposition of NH4N0.1
This question is incomplete, the complete question is;
A 1.00 g sample of NH4NO3 is decomposedin a bomb calorimeter. The temperature increases by 6.12°C. What is the molar heat of decomposition for ammonium nitrate?
Molar mass, NH4NO3 80.0 g/mol
Calorimeter Constant 1.23 kJ/°C
Answer:
the molar heat of decomposition for ammonium nitrate is - 602.4 kJ/mol
Explanation:
Given that;
change in temperature ΔT = 6.12 °C
Calorimeter Constant C = 1.23 kJ/°C
Molar mass, NH4NO3 = 80.0 g/mol
we know that;
Heat gained by the calorimeter (Q1) = Heat lost by the decomposition of NH4NO3 (Q2)
Q1 = C × ΔT
Q1 = (1.23 kJ/K) × (6.12 K) = 7.53 kJ
Q value we get becomes negative since we are talking about reaction and not calorimeter
hence
Q1 = - 7.53 kJ
now
1 g NH4NO3 decomposed, - 7.53 kJ of heat is released
so if 80 g which is 1 mol NH4NO3 decompose, the heat will be;
(80 g/mol x -7.53 kJ) / 1 g = - 602.4 kJ/mol
Therefore the molar heat of decomposition for ammonium nitrate is - 602.4 kJ/mol
What nuclide undergoes fission to form molybdenum-103, atomic number 42, tin-131, atomic number 50, and two neutrons?
Element symbol: _______ mass number: _______
Answer:
The correct answer is Pu, 234.
Explanation:
In the given case, let us consider the reactant as X. Now the mass number (balanced) on both the sides will be,
Mass of X = Mass of Molybdenum + Mass of Tin + Mass of neutrons
M = 1 * 103 + 1 * 131 + 2 * 0
M = 234
Now the atomic number (balanced) on both the sides,
Atomic number of X = Atomic number of Molybdenum + Atomic number of Tin + Atomic number of neutrons
A = 1*42 + 1*50 + 2*1
A = 94
The atomic number 94 is for the element Plutonium, whose symbol is Pu. Thus, the reactant is 234-Pu.
In a climatological sense, dryness is a function of both annual rainfall and ________.
This a geology question.
Answer:
In a climatological sense, dryness is a function of both annual rainfall and evaporation