How is the A He related to the A Hof a reaction?​

Answer:

Explanation:

Near the earth's surface where gravity is approximately 10 m/s² downward

v = u + at

v = 5 + (-10)(1) = -5 m/s

so it has the same speed but in the opposite (downward) direction.

The instantaneous velocity of the object is -4.8 m/s and is directed downwards.

Instantaneous velocity is defined as the rate of change of position for a given interval of time. And it also represents the direction.

Here,

The object is freely falling.

So, the acceleration of the object is the acceleration due to gravity.

a = g = 9.8 m/s²

Initial velocity of the object, u = 5 m/s  (upward velocity)

Time given, t = 1

Using the first equation of motion,

v = u + at

v = 5 + (-9.8) x 1  

( negative sign is due to it is directed downwards which is opposite to u)

v = -4.8 m/s

That means the instantaneous velocity is directed downwards.

Hence,

The instantaneous velocity of the object is -4.8 m/s and is directed downwards.

To learn more about instantaneous velocity, click:

https://brainly.com/question/2273637

#SPJ3

Answer:

Energy is converted from other forms, not created

Explanation:

The ball has a decrease in potential energy which allows the kinetic energy, and therefore speed, to  increase

Answer:

Explanation:

Only force in the direction of motion does work

The force acts in the x direction

The x change of position was 6 m

W = Fd = 12(6) = 72 J

The work done by the given force during this displacement is determined as 120 J.

The work done on the object is calculated as follows;

W = Fd

where;

d = √(6² + 8²)

d = 10 m

W = 12 x 10

W = 120 J

Learn  more about work done here: https://brainly.com/question/25573309

#SPJ6

If it takes 4.4 Newton to lift 1 pound, then to lift 2 pounds the force required will be equal to 8.8 Newton.

A force in physics is an input that has the power to change an object's motion. A mass-containing object's velocity can vary, or accelerate, as a result of a force. Intuitively, a push or a pull can also be used to describe forces.

Being such a vector quantity, a force does have magnitude and direction. The SI unit metric newton is used to measure it (N). The letter F stands for force.

According to Newton's second law's original formulation, an object's net force is equal to the speed that its momentum is changing over time.

As per the given data in the question,

It takes 4.4 N to lift 1 pound,

Let the total force required to lift 2 pounds is x.

x = (4.4 × 2)/1

x = 8.8 N

To  know more about Force:

https://brainly.com/question/13191643

#SPJ2

Answer:

2560J

Explanation:

By definition the kinetic energy can be calculated in the following way:

K = (mv²)/2 = 80kg·(8.0m/s)²/2 = 2560 J

Answer:

is there any questions

Answer:

What is your question???

Explanation:

Answer:

1110111010010110

Explanation:

I am not able to upload the working out using the sum of weights method sorry

Answer:

Answers A and D are the correct solution.

Explanation:

Both pots have the same mass and the same velocity vector.

the only difference between A and D is the selection of the reference frame positive direction.

The equation (A) and equation (D) correctly model the momentum of the two-cactus system.

The product of a particle's mass and velocity is called momentum. Being a vector quantity, momentum possesses both magnitude and direction.

According to Isaac Newton's second equation of motion, the force applied on a particle is equal to the time rate of change of momentum.

Given that: mass of each cactus: m = 5 kg.

And they slide down a sagging shelf in the same direction with the same speed.

In equation (A), both velocities of two cacti are in positive direction whereas, in equation (B), both velocities of two cacti is in negative direction.  Hence, equation (A) and equation (D) correctly model the momentum of the two-cactus system.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ2

Answer:

Newton's second law

Explanation:

Answer:

FA = 2FB

Force on spring A is twice the Force on spring B

Explanation:

F = kx

FB = (kB)x

FA = (kA)x

FA= (2kB)x

FA = 2(kB)x

FA = 2FB

The force [tex]F_A[/tex] needed to stretch spring A is going to be twice as much as the force [tex]F_B[/tex] needed to stretch spring B.

Explanation:

We know that the spring constants are related as

[tex]k_A = 2k_B[/tex]

The force [tex]F_A[/tex] needed to stretch spring A is given by

[tex]F_A = -k_Ax[/tex]

Also, the force [tex]F_B[/tex] needed to stretch spring is

[tex]F_B = -k_Bx[/tex]

Taking the ratio of the forces, we get

[tex]\dfrac{F_A}{F_B} = \dfrac{-k_Ax}{-k_Bx} = \dfrac{k_A}{k_B}[/tex]

Since [tex]k_A = 2k_B,[/tex] the equation above becomes

[tex]\dfrac{F_A}{F_B} = \dfrac{2k_B}{k_B} = 2[/tex]

or

[tex]F_A = 2F_B[/tex]

This shows that since the spring constant of spring A is twice as large as that of spring B, the force needed is going to be twice as large.

Answer:

Cellular respiration that uses oxygen is called ​Cellular respiration

Explanation:

Without oxygen, it's call fermentation.

a) Sketches of all possible pv-diagrams for the cycle are attached below

b) The work W[tex]_{ac}[/tex] for the process Ca is : 2462.8  J

Given data :

Amount of heat flowing out = 800 J

Ta = 200 K

Tb = 300 K

R = 800

B) Determine the work W for the process Ca

Wₐs = -pdv

       = - [ pVb - pVa ] ---- ( 1 )

note : pVb = nRTb ,  pVa = nRTa

Equation ( 1 ) becomes

= -nR [ Tb - Ta ]

= - 2(8.314 ) [ 300 - 200 ]

= - 1662.87

given that W[tex]_{bs}[/tex] = 0 which is isochonic

dv = 0 ( cyclic process ) = d∅ - dw

∴ 0 = 800 - ( Wₐs  +  W[tex]_{ac}[/tex] )

Therefore : W[tex]_{ac}[/tex] = 800 + 1662.8 = 2462.8  J

Hence we can conclude that the work W for the process Ca = 2462.8  J

Learn more about Pv diagrams : https://brainly.com/question/25401637

Answer:

[tex]v^2=\frac{T}{M}[/tex]

where v = transverse wave velocity, T = tension in the string, M = mass per unit length.

Explanation:

Dimensional analysis is where you just look at the units and see how they fit within each other.

In this case, all relationships are made using the MLT comparisons, where M stands for Mass, L stands for Length, and T stands for time.

For example, for velocity, we know the SI unit for velocity is [ms⁻¹] which is L¹T⁻¹, we can do the same thing for tension = [N = Kgms⁻²] = M¹L¹S⁻², and for the mass per unit length which we can think of as [Kgm⁻¹] = M¹L⁻¹.

If you play around a little with the powers, you can find a relationship:

[tex]v^2=\frac{T}{M}[/tex]

since:

[L¹T⁻¹]² = L²T⁻² = M¹L¹T⁻² ÷ M¹L⁻¹ = M¹⁻¹L¹⁻⁽⁻¹⁾T⁻² = M⁰L²T⁻² = L²T⁻²

Answer:

Explanation:

Do you mean 7 x 10⁻⁵² seconds? Who can even measure that small a time period?

If that time is incorrect, just redo the math with the correct time to get the force.

An impulse will cause a change of momentum

FΔt = mΔv

F = mΔv/Δt

F = 2(0 - 6)) / (7 x 10⁻⁵² - 0)

F = - 1.7 x 10⁵² N

The magnitude of that force would pretty much crush any rock it hit.

The density of the metal is ρ = 8.0g/cm³.

The measure of material how densely it is packed together is called density. As the mass per unit volume, it has that definition. Symbol for density: D or Formula for Density: When is the density, m is the object's mass, and V is its volume, the equation is: = m/V.

Because it enables us to predict which compounds will float and which will sink in a liquid, density is a crucial notion. As long as an object's density is lower than the liquid's density, it will often float.

To the given equation we have :

mass of the bar = 256g

volume of metal bar = 32cm³

So according to the formula of density

ρ = m/V

So, putting values

ρ = 256g /32cm³

ρ = 8.0g/cm³

To know more about volume :

https://brainly.com/question/28058531

#SPJ1

Answer:

a is 750 second

b is 2 hour

The time it takes for the train to travel 30,000m and 50,000m is 750seconds and 1250 seconds, respectively.

The speed is the distance covered by an object at a particular time. Therefore, it is the ratio of distance and time.

[tex]\rm{Speed = \dfrac{Distance}{Time}[/tex]

A train travels at 40m/s. Now, the time it takes to travel the given distance is,

A.) 30,000m

Speed = Distance / Time

Time = Distance / Speed

Time = 30,000m / 40m/s

Time = 750 seconds

B.) 50 km

1 km = 1000m

50 km = 50 × 1000m = 50,000 m

Speed = Distance / Time

Time = Distance / Speed

Time = 50,000m / 40m/s

Time = 1250 seconds

Hence, the time it takes for the train to travel 30,000m and 50,000m is 750seconds and 1250 seconds, respectively.

Learn more about Speed here:

https://brainly.com/question/15100898

#SPJ2

The characteristics of the RLC circuit allow to find the result for the capacitance at a resonance of 93.5 Hz is:

A series RLC circuit reaches the maximum signal for a specific frequency, called the resonance frequency, this value depends on the impedance of the circuit.

            [tex]Z^2 = R^2 + ( wL - \frac{1}{wC} )^2[/tex]  

Where Z is the impedance of the circuit, R the resistance, L the inductance, C the capacitance and w the angular velocity. The negative sign is due to the fact that the current in the capacitor and the inductor are out of phase.

In the case of resonance, the impedance term completes the circuit as a resistive system.

           [tex]wL - \frac{1}{wC} = 0 \\w^2 = \frac{1}{LC}[/tex]  

Indicate that the inductance L = 1.6 H and the frequency f = 93.5 Hz.

Angular velocity and frequency are related.

         w = 2π f

Let's  substitute.

          [tex]C = \frac{1}{L ( 2 \pi f)^2 }[/tex]  

Let's calculate.

         [tex]C = \frac{1}{1.6 \ ( 2\pi \ 93.5)^2}[/tex]  

         C = 1.8 10⁻⁶ F

In conclusion with the characteristics of the RLC circuits we can find the result for the capacitance at a 93.5 Hz resonance is:

Learn more about serial RLC circuits here: brainly.com/question/15595203

Answer:

a) 5000

b) 40m/s this is the right answers

Explanation:

but no so so sure

The magnitude of the gravitational force the planet exerts on Satellite 2 is  1/2F.

We recall that from Newton's law of universal gravitation, the gravitational force is given by;

F =G m1m2/r^2

m1 and m2 are the respective masses

r is the distance of separation.

Let the mass of the planet be M and the mass of the satellite be m. The distance of separation is r.

For satellite 1;

F = GmM/(2r)^2

F = GmM/4r^2

For satellite 2;

F2= G2mM/r^2

Hence, the magnitude of the gravitational force the planet exerts on Satellite 2 is  1/2F.

Learn more about gravitational force: https://brainly.com/question/24783651

Answer:

9sqrt4

Explanation:

Assuming you mean 6.0i m/s and (-2.0i + 4.0j) m/s^2:

The maximum positive x coordinate is when the time is 3 seconds, because the horizontal velocity will be zero, and therefore will be a turning point, where after that point the x coordinate will only be more negative.

After 3 seconds the x coordinate is 6*3+1/2*-2*3^2=9, and the y coordinate will be 1/2*4*3^2=18.

The distance from the origin is sqrt(9^2+18^2) = 9*sqrt(1+4)

At the instant the particle achieves its maximum positive x coordinate, the displacement is 4.03 m.

The displacement of the particle is calculated as follows;

v² = u² + 2as

where;

a = √(2² + 4²) = 4.47 m/s²

0 = u² + 2as

s = -u²/2a

s = -(6²)/(2 x 4.47)

s = -4.03 m

Thus, at the instant the particle achieves its maximum positive x coordinate, the displacement is 4.03 m.

Learn more about displacement here: https://brainly.com/question/321442

#SPJ6

Answer:

19.3m/s

Explanation:

Use third equation of motion

[tex]v^2-u^2=2gh[/tex]

where v is the velocity at halfway, u is the initial velocity, g is gravity (9.81m/s^2) and h is the height at which you'd want to find the velocity

insert values to get answer

[tex]v^2-0^2=2(9.81m/s^2)(38/2)\\v^2=9.81m/s^2 *38\\v^2=372.78\\v=\sqrt[]{372.78} \\v=19.3m/s[/tex]

Answer:

we already are.

Explanation:

God created us, and we are the descendants of Abraham. if you want to choose to live against it, you'll be doing something similar to fighting a current. gods love is unfathomable. he is the only true God, and is our father in heaven.

Answer:

V= A ω      maximum KE of object in SHM

V2 / V1 = .958     ratio of amplitudes since ω is constant

KE2 / KE1 = 1/2 m V2^2 / (1/2 m V1^2) = (V2 / V1)^2

KE2 / KE1 = .958^2 = .918

So KE2 = .918 KE1 and .082 = 8.2% of the energy is lost in one cycle

Answer:

There always is an acceleration in a curvilinear motion, as the velocity vector changes, so always.

Answer:

C.

Explanation:

Visual constancy is a key mechanism that allows the perception to remain.the same even as images change

#CARRYONLEARNING

Visual constancy is  important because it allows perceptions to remain the same even as images change.

Constancy phenomenon describes how people and animals tend to perceive familiar objects as having a constant shape, size, colour, or location regardless of adjustments to distance, illumination, or perspective. Instead of responding to the real stimulus, the impression has a tendency to adapt to the object as it is or is imagined to be.

The ability to recognise things in a variety of situations, which appear to be "taken into account" throughout a process of mental rebuilding of the known image, is a result of perceptual constancy. For instance, snow appears white in both the dim moonlight and the 800,000-fold brighter day. Reduced contextual cues that help with object identification and limited experience with the object both affect perceptual constancy.

Learn more about constancy here:

https://brainly.com/question/16926291

#SPJ2

The conventions for the current allow to find the result for which is the direction of the current the is circuit is:

Current is the movement of electrons in a circuit per unit time.

In an electrical circuit the electrons that have a negative charge leave the negative electrode towards the positive electrode, by convention the current goes in the opposite direction from the positive electrode towards the negative electrode.

When analyzing the given circuit, the current leaves the positive pole at the top of the battery and moves through the blue wire, reaches the light bulb and moves the red wire and reaches the negative pole of the battery.

In conclusion using the conventions for the current we can find the result for which is the direction of the current the is circuit is:

Learn more about electric current here: brainly.com/question/996480