Answer:Hola UwU
Most chemical reactions involve the breaking and formation of chemical bonds. It takes energy to break a chemical bond but energy is released when chemical bonds are formed. If more energy is released than consumed, then the chemical reaction evolves heat and is said to be exothermic.
Explanation:Adios~ UnU haha
Describe the structure and bonding in graphite.
Answer:
In graphite, each carbon atom is covalently bonded to 3 other carbon atoms. ... These extra electrons are delocalised, or free to move, in the area between layers of carbon atoms. As these electrons are free to move they are able to carry charge and thus graphite can conduct electricity.
Explanation:
Graphite has a layered structure, with each layer consisting of a two-dimensional hexagonal lattice of carbon atoms. Within each layer, carbon atoms are covalently bonded in a flat, trigonal planar arrangement, forming strong σ bonds.
What is graphite?In graphite, carbon atoms are arranged in a flat, hexagonal lattice within each layer, forming strong covalent σ bonds. These layers are stacked on top of each other, held together by weaker van der Waals forces, which allow for easy slippage.
The presence of π bonds between the carbon atoms in each layer results in delocalized π electrons above and below the plane, creating a "sea" of mobile electrons. This delocalization gives graphite its remarkable properties, including electrical conductivity and lubrication.
Read more about graphite here: https://brainly.com/question/27860158
#SPJ6
newborn reflexes... A. are consciously controlled behaviors B. are unique to each individual newborn C. have little impact on development D. contribute to infant survival
Answer:
The correct answer to the following question will be Option B.
Explanation:
To survive, newborns don't require reflexes. Even though their perceptions were already improving performance, they don't rely on visual stimulation because it was too abstract for them so you can't even guess whose stimulus they're going comes to choosing.The reflexes between each child are special. Each one of them has its own.For instance, its action has always been designed to suck quickly.
Some other choices being made aren't linked to the circumstance. The second Scenario would have been the right choice.
Electrical potential is the amount of energy that is available to do what?
A.
attract atoms to each other
B.
move atoms from one half cell to another half cell
C.
move electrons from anode to cathode
D.
move electrons from cathode to anode
C.
move electrons from anode to cathode
Step-by-step Explanation
Electrical potential is the amount of energy that is available to move electrons from anode to cathode
Answer:
move electrons from anode to cathode
Explanation:
Plato
What conclusion did Rutherford draw from his gold-foil experiment? A. Almost all the mass of an atom is concentrated in the nucleus. B. Atoms contain three different subatomic particles. C. Electrons are tiny particles that carry a negative charge. D. The mass of a proton is nearly equal to the mass of a neutron.
Answer:
A. Almost all of the mass is concentrated in the nucleus.
Explanation:
Because when he shot the alpha particles towards the atoms, most passed through (which meant atom is mostly empty space), but some bounced back and such (which meant mass is concentrated in the nucleus.)
The reason they bounced is because alpha particles are postive and nucleus is positive as well, and we know positives don't attract, rather they repel thus they bounced.
A blacksmith heated an iron bar to 1445 °C. The blacksmith then tempered the metal by dropping it into 42,800 mL of
water that had a temperature of 22.00 °C. The final temperature of the system was 45.00°C. What was the mass of
the iron bar? (Hint: Density of water is 1.00 g/mL) The specific heat capacity for iron is 25.01 J/mol°C.
Answer:
6626 g
Explanation:
Given that:
Density of water = 1.00 g/ml, volume of water = 42800 ml.
Since density = mass/ volume
mass of water = volume of water * density of water = 42800 ml * 1 g/ml = 42800 g
Initial temperature of water = 22°C and final temperature of water = 45°C.
specific heat capacity for water = 4.184 J/g°C
ΔT water = 45 - 22 = 23°C
For iron:
mass = m,
specific heat capacity for iron = 0.444 J/g°C
Initial temperature of iron = 1445°C and final temperature of water = 45°C.
ΔT iron = 45 - 1445 = -1400°C
Quantity of heat (Q) to raised the temperature of a body is given as:
Q = mCΔT
The quantity of heat required to raise the temperature of water is equal to the temperature loss by the iron.
Q water (gain) + Q iron (loss) = 0
Q water = - Q iron
42800 g × 4.184 J/g°C × 23°C = -m × 0.444 J/g°C × -1400°C
m = 4118729.6/621.6
m = 6626 g
Which consists of only one type of atom?
Answer:
A chemical element
Explanation:
A chemical element consists of only one type of atom.
The initial temperature of a bomb calorimeter is 28.50°C. When a chemist carries out a reaction in this calorimeter, its temperature decreases to 27.45°C. If the calorimeter has a mass of 1.400 kg and a specific heat of 3.52 J/(gi°C), how much heat is absorbed by the reaction?
Answer:
D. 5,170 J
Explanation:
A sample of gas is found to occupy a volume of 900cm^3 at 27 degree Celsius, calculate the temperature at which it will occupy a volume of 300cm^3, provided the pressure is kept constant.
Answer:
Explanation:
Here, V1=900cm3, V2=300cm3
T1=(27+273)K=300K, T2=?
Applying Charles's law,
V1T1=V2T2
∴T2=V2T1V1=300cm3×300K900cm3=100K
=100−273=−173∘C
Hope this helps
plz mark as brainliest!!!!!!
A chemist dissolves 0.9 g of an unknown monoprotic (one acidic H) acid in water. She finds that 14.6 mL of 0.426 M NaOH are required to neutralize the acid.
Answer:
144.7 g/mol would be the molar mass of the monoprotic acid
Explanation:
We can find the molar mass of the monoprotic acid from the data showed in the excersie. As every titration we can say that:
mEq acid = mEq base
mEq acid = 14.6 mL . 0.426 M
mEq acid = 6.2196 mEq
mEq = Volume (mL) . N = mass (g) / (EQ / 1000), where the EQ is the:
Molar weight / valence. For this case, as the acid is a monoprotic one, we assume Molar Weight = EQ
6.2196 mEq = 0.9 g / (EQ / 1000)
6.2196 mEq . EQ/1000 = 0.9 g
EQ = 0.9 g / 6.2196×10⁻³ = 144.7 g/mol
Jack tries to place magnets on his refrigerator at home, but they won’t stick. What could be the reason?
Answer:
The reason might be that the material that the fridge is made out of is not magnetic, meaning that it's not attracted to metal.
what is the mass of 1.5 mol of aluminum?
Answer:
40.47 g Al
Explanation:
In 1 mol of Al, there are 26.98 grams of Al, so Al is 26.98 g/mol.
Simply multiply 1.5 by 26.98 to get your answer.
When sugar is added to a sugar solution, the sugar does not dissolve. Which
term describes the original sugar solution?
O A. Semisaturated
O B. Supersaturated
C. Saturated
D. Unsaturated
Answer:Supersaturated
Explanation:The answer is supersaturated because supersaturation is a solution that contains more than the maximum amount of solute that is capable of being dissolved at a given temperature. It is supersaturated because there is already a sugar solution and adding another sugar is more than the maximum amount of solute.
Representa la unión iónica entre los siguientes átomos: 1) Bromo y Potasio 2) Calcio y Oxígeno 3) Cloro y Magnesio 4) Sodio y Flúor 5) Aluminio y Nitrógeno Ayuda por favoor
Answer:
a. KBr
b. CaO
c. MgCl₂
d. NaF
e. NH₃
Explanation:
a. 2K + Br₂ = 2KBr
b. 2Ca + O₂ = 2CaO
c. Mg + Cl₂ = MgCl₂
d. 2Na + F₂ = 2NaF
d. N₂ + 3H₂ = 2NH₃
Why does a perfume bottle burst when placed inside the flame?
Answer:
Explanation:
It is because they contain ethyl alcohol and they are inflammable. The perfume contains alcoholic substances like the ethyl alcohol or the ethanol. After reaching the flash point,the combustion of ethanol takes place inside the bottle and the internal combustion created pressure causes explosion.
Hope this helps
plz mark as brainliest!!!!!!!
Answer:
because they contain ethyl alcohol and they are inflammable.
Which refers to the force that one massive object exerts to attract another object? velocity gravity acceleration newton
Answer:
gravity is the correct answer to the given question .
Explanation:
The gravity is the gravitational force due to the gravitational the solar system as well as the other body of dimensional object to its center point. The gravitational force maintains all the planetary systems in the orbit over the sun.We can called gravitational force as the universal force .
The gravitational force attracts the huge object for grabbing the another object.All the other option are not attracting the another object that's why these are incorrect option .Answer:
the answer is b gravity :)
Explanation:
u got this :)
HELP! 10 points rewarded, plus, best answer gets BAINLIEST!!
Answer:
4.08 grams
Explanation:
Essentially, we're looking for the mass of HCl that "matches" 3.26 grams of magnesium hydroxide.
First, convert 3.26 grams of [tex]Mg(OH)_2[/tex] into moles by dividing by the molar mass. The molar mass of [tex]Mg(OH)_2[/tex] is 24.3 + 16 * 2 + 1 * 2 = 58.3 g/mol. So, 3.26 grams is equal to:
3.26 g ÷ 58.3 g/mol = 0.0559 mol [tex]Mg(OH)_2[/tex]
Notice that from the chemical equation, magnesium hydroxide and hydrochloric acid (HCl) have a ratio of 1 to 2. In other words, for every 0.0559 moles of [tex]Mg(OH)_2[/tex], there are 0.0559 * 2 = 0.112 moles of HCl.
Finally, convert moles of HCl to grams by multiplying 0.112 by the molar mass, which is 1 + 35.45 = 36.45 g/mol:
0.112 mol HCl * 36.45 g/mol = 4.08 g HCl
The answer is thus 4.08 grams.
~ an aesthetics lover
Explain how to arrange the following in increasing order of atomic size/radius: Al, C, Si
Answer:
C, Si, Al
Explanation:
We use periodic trends to help us find the atomic radii. The trend for atomic radii on the Periodic Table of Elements is down and to the left. So whichever elements are furthest to the left and farthest down have the largest atomic radii.
1) In 1.31 g of a chloride of titanium, there is 0.528 g of titanium. What is the empirical formula of this titanium chloride?
Answer:
TiCl2
Explanation:
Mass of the chloride of titanium= 1.31 g
Mass of titanium= 0.528 g
Therefore mass of chlorine = 1.31-0.528 = 0.782 g
To determine the empirical formulae of the titanium chloride, divide the mass of each element by its relative atomic mass and divide through by the lowest ratio.
Ti- 0.528/48 = 0.011, Cl- 0.782/35.5 = 0.022
Ti- 0.011/0.011 , Cl- 0.022/0.011
Ti- 1, Cl-2
Hence the required empirical formula is TiCl2
DUE IN 30 MINUTES!!! (please keep it short if you can, if not its ok.) What is the molar mass of Pb(SO4)2? Explain how you calculated this value. (4 points)
Answer:
399
Explanation:
Pb(SO4)2 contains 1 atom of Pb, 2 atoms of S and 8 atoms of O. So, atomic mass of Pb(SO4)2 is 207 + 64 + 128 = 399 u. Therefore, molar mass of Pb(SO4)2 is 399 g/mol.HOPE THIS helps. Good Luck
Answer:
The molar mass of Pb(SO₄)₂ is 399.32.
Explanation:
To find the molar mass of Pb(SO₄)₂, you have to find the molar mass of each individual element that makes up the compound.
Let's start by figuring out how many of each element is present in the compound.
Pb (lead) - 1
S (sulfur) - 2
O (oxygen) - 8
(SO₄)₂ is a polyatomic ion. It is written in parentheses followed by a subscript of 2. This means that there are two sulfate ions in the compound. So, the number of sulfur atoms and oxygen atoms doubles. (1 × 2 = 2) and (4 × 2 = 8).
Next, look up the molar mass of each element on a periodic table and multiply it by the number of atoms present.
Pb - 207. 2 × 1 = 207. 2
S - 32.06 × 2 = 64.12
O - 16.00 × 8 = 128
Lastly, add up them all together to get the molar mass.
207. 2 + 64.12 + 128 = 399.32
Which refers to the density of the medium’s particles at the compression of a sound wave? A.amplitude B.pitch C.volume D.wavelength
Answer:
A is the answer.
Explanation:
The sound wave is a longitudinal wave which travels in the form of compression and rarefaction . The point where the particles are closer to each other is called compression and the point where the particles are far apart from each other is called rarefaction.
Answer:
Amplitude
Explanation:
Amplitude describes the displacement of the medium's particles. The higher the amplitude, the more dense it is, and the lower the amplitude, the less dense it is.
Pitch is incorrect because it describes the sound
Volume is incorrect because it describes the sound.
Wavelength is incorrect because it describes the distance between a period of a wave.
What mass of nickel (Ni) is in a 2.4 Kg sample of propanol if the concentration is 20 ppb ? (atomic mass of Ni = 58.69)
Answer:
The mass of nickel is 48μg
Explanation:
Parts per billion is a way to describe small concentrations and is defined as the ratio between μg of solute and kg of solvent.
If a solution of nickel in propanol is 20ppb, contains 20μg of nickel in 1 kg of propanol.
Thus, a sample of 2.4kg of propanol will contain:
2.4kg × (20μg nickel / 1kg) = 48μg nickel
The mass of nickel is 48μgConsider an electrochemical cell based on the spontaneous reaction 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+. If the zinc ion concentration is kept constant at 1 M, and the chlorine ion concentration is decreased from 1 M to 0.001 M, the cell voltage should:
Answer:
there is an increase by 0.18 V in the cell voltage.
Explanation:
The given equation of the reaction can be well written as
[tex]2AgCl_{(s)} + Zn _{(s)} \to 2Ag_{(s)} + 2 Cl^- _{(aq)}+ Zn^{2+}_{(aq)}[/tex]
By application of Nernst Equation ; we have the expression
[tex]E_{cell} = E^0- \dfrac{0,059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
here in the above equation;
n = number of electrons transferred in the equation of the reaction
n = 2
Also;
[tex]E^0 = E_{cathode} - E_{anode}[/tex]
[tex]E^0 = E_{Ag^+/Ag} - E_{Zn^+/Zn}[/tex]
[tex]E^0 = +(0.80 \ V) - (-0..76 \ V)[/tex]
[tex]E^0 = (0.80 \ V +0..76 \ V)[/tex]
[tex]E^0 = 1.56 \ V[/tex]
If the zinc ion concentration is kept constant at 1 M; we have:
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log (1)[/tex]
Since log(1) = 0
Therefore;
[tex]E_{cell} = 1.56\ V[/tex]
When the chlorine ion concentration is decreased from 1 M to 0.001 M; we have;
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[1*0.001^2}]})[/tex]
[tex]E_{cell} = 1.56 - 0.0295 \ * \ log ({[1*10^{-6}}]})[/tex]
[tex]E_{cell} = + 1.737 \ V[/tex]
The change in voltage = [tex]E_{cell} - E^0[/tex]
=( 1.737 - 1.56 )V
= 0.177 V
≅ 0.18 V
Thus; from the following observation; there is an increase by 0.18 V in the cell voltage.
The voltage of the cell increased by 0.18 V.
The equation of the reaction is; 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+
We know that;
E°cell = 1.36 - (-0.76) = 2.12 V
If the cells are both at 1M concentration the Ecell = E°cell = 2.12 V
When the concentration of Cl- decreased from 1 M to 0.001 M
Ecell = E°cell - 0.0592/n log Q
Substituting values;
Ecell = 2.12 V - 0.0592/2 log (1 × (0.001)^2)
Ecell = 2.298 V
Increase in voltage = 2.298 V - 2.12 V = 0.18 V
Learn more: https://brainly.com/question/165414
what is meant by amoeba and what is the name of its parts
Answer:
amoeba is the unicellular organism which can be seen by only microscope but not with our nacked eyes
Answer:
An amoeba often called an amoeboid, is a type of cell or unicellular organism which has the ability to alter its shape, primarily by extending and retracting pseudopods Amoebae do not form a single taxonomic group; instead, they are found in every major lineage of eukaryotic organisms. Amoeboid cells occur not only among the protozoa, but also in fungi, algae, and animals.
name of parts of ameoba
3 parts – the cytoplasm, plasma membrane and the nucleus. The cytoplasm can be differentiated into 2 layers – the outer ectoplasm and the inner endoplasm. The plasma membrane is a very thin, double-layered membrane composed of protein and lipid molecule
i hope this will help you
Halogens are active non metal
Answer:
True
Explanation:
They are actively non metals due to their electron configuration and number of valence electrons
Lipase is a protein that helps the body break down fats in foods. Lipase is best classified as which type of protein? an enzyme an antibody a structural protein a binding protein.
Its for edg please answer quickly if you can
Answer:
an enzyme
Explanation:
just took it on edge
Lipase is an enzyme protein which contains amino acids that helps the body break down fats in foods.
What is an amino acid?Amino acids are defined as the substances which are considered to be the monomers of proteins.Every amino acid has the same structure consisting of a central carbon which is bonded to an amino group , carboxyl group and a hydrogen.
Each amino acid also has another atom or a group of atoms bonded to the alpha carbon which are also known as the R group or the variable group of the side chain.There are 20 common amino acids present in natural proteins and each amino acid has the same backbone.
The sequence and number of amino acids determines protein's shape,size and also its function. Each amino acid is attached to the other by a covalent bond formed by a dehydration reaction.
Learn more about amino acids,here:
https://brainly.com/question/15687833
#SPJ6
Jack tries to place magnets on his refrigerator at home, but they won’t stick. What could be the reason?
Answer:
The body of the refrigerator isn’t made of magnetic material.
Explanation:
Same reason why a magnet doesn't stick to a paper or a plastic is the reason behind why Jack's refrigerator is acting out because may be it isn't made of magnetic materials like iron, steel etc, but rather made up of non magnetic things like porcelain, wood etc.
20
What is the name of this compound?
OH
CH3-CH3 -CH 2 -CH2-CH-CH2
Isohexyl alcohol
hexyl alcohol
tert-hexyl alcohol
sec-hexyl alcohol
tret-hexyl alcohol
Explanation:
its formula is CH3-CH3-CH2-CH2-CH-CH2
What atom should be balanced last when balancing hydrocarbon combustion
reactions?
A. The oxygen atoms
B. The carbon atoms
C. Any of the three
D. The hydrogen atoms
Answer:
A. The oxygen atoms
Explanation:
A hydrocarbon combustion reaction consist of carbon, hydrogen and oxygen. In balancing the hydrocarbon combustion reaction at first carbon and hydrogen atoms are balanced and at last oxygen atoms are balanced.
Oxygen atoms are balanced at the end because oxygen atom stand alone as O2 and easier to balance than hydrogen and carbon.
Hence, the correct option is "A".
A glass cup of orange juice is found to have pOH of 11.40. Calculate the concentration of the hydrogen ions in the juice.
Answer: The concentration of hydrogen ion is 2.5 x 10∧-3.
Explanation:
It is well known that; pH + pOH = 14
∴ pH + 11.40 = 14
pH = 14 -11.40 = 2.60
Remember that,
pH = - Log [ H+ ]
2.60 = - log [H+]
To get the hydrogen ion concentration, we take the anti-log of 2.60.
[H+] = Antilog 2.60 = 2.5 x 10∧-3.
Considere uma molécula de glicose (C6H12O6) e indique: a-) O número de átomos de carbono_____________________ b-) O número de átomos de hidrogênio __________________ c-) O número de átomos de oxigênio ___________________ d-) Quantos átomos teremos ao todo se tivermos 8 moléculas dessa substância? _______ e-) Quantos átomos teremos de cada elemento com 20 moléculas de glicose
Answer:
Considere uma molécula de glicose (C6H12O6) e indique: a-) O número de átomos de carbono = 6 b-) O número de átomos de hidrogênio = 12 c-) O número de átomos de oxigênio = 6d-) Quantos átomos teremos quando descubro se temos 8 moléculas dessa substância?
48 oxigênio, 48 carbono e 96 hidrogênio e-) Quantos átomos de cada elemento teremos com 20 moléculas de glicose?
160 de oxigênio e carbono e 240 de hidrogênio.
Explanation:
A glicose é uma das moléculas mais usadas no organismo humano, pois é uma molécula em que sua decomposição é muito mais fácil que os aminoácidos, portanto, eles produzem como produto a moeda de energia que é ATP mais facilmente do que outros alimentos .
A glicose não é encontrada apenas em alimentos açucarados, isso é um mito, na verdade é a unidade de carboidratos (de assados a doces)