To calculate how far a person travels to come to a complete stop in 33 milliseconds at a constant acceleration of 60 g, we will use the following formula .
Where,d = distance travelled
a = acceleration
t = time taken
Given values area = 60 gg (where 1 g = 9.8 m/s^2) = 60 × 9.8 m/s^2 = 588 m/s2t = 33 ms = 33/1000 s = 0.033 s.
Substitute the given values in the formula to find the distance travelled:d = (1/2) × 588 m/s^2 × (0.033 s)^2d = 0.309 m Therefore, the person travels 0.309 meters to come to a complete stop in 33 milliseconds at a constant acceleration of 60 g.
To know more about acceleration visit :
https://brainly.com/question/2303856
#SPJ11
If the cutoff wavelength for a particular material is 697 nm considering the photoelectric effect, what will be the maximum amount of kinetic energy obtained by a liberated electron when light with a wavelength of 415 nm is used on the material? Express your answer in electron volts (eV).
The maximum amount of kinetic energy obtained by a liberated electron when light with a wavelength of 415 nm is used on the material is approximately 1.16667 x 10^-6 eV.
Max Kinetic Energy = Planck's constant (h) * (cutoff wavelength - incident wavelength)
Cutoff wavelength = 697 nm
Incident wavelength = 415 nm
Cutoff wavelength = 697 nm = 697 * 10^-9 m
Incident wavelength = 415 nm = 415 * 10^-9 m
Max Kinetic Energy =
= 6.63 x 10^-34 J s * (697 * 10^-9 m - 415 * 10^-9 m)
= 6.63 x 10^-34 J s * (282 * 10^-9 m)
= 1.86666 x 10^-25 J
1 eV = 1.6 x 10^-19 J
Max Kinetic Energy = (1.86666 x 10^-25 J) / (1.6 x 10^-19 J/eV)
= 1.16667 x 10^-6 eV
Learn more about kinetic energy here:
brainly.com/question/999862
#SPJ11
A spherical mirror is to be used to form an image 5.90 times the size of an object on a screen located 4.40 m from the object. (a) Is the mirror required concave or convex? concave convex (b) What is the required radius of curvature of the mirror? m (c) Where should the mirror be positioned relative to the object? m from the object
The mirror required is concave. The radius of curvature of the mirror is -1.1 m. The mirror should be positioned at a distance of 0.7458 m from the object.
Given,
Image height (hᵢ) = 5.9 times the object height (h₀)
Screen distance (s) = 4.40 m
Let us solve each part of the question :
Is the mirror required concave or convex? We know that the magnification (M) for a spherical mirror is given by: Magnification,
M = - (Image height / Object height)
Also, the image is real when the magnification (M) is negative. So, we can write:
M = -5.9
[Given]Since, M is negative, the image is real. Thus, we require a concave mirror to form a real image.
What is the required radius of curvature of the mirror? We know that the focal length (f) for a spherical mirror is related to its radius of curvature (R) as:
Focal length, f = R/2
Also, for an object at a distance of p from the mirror, the mirror formula is given by:
1/p + 1/q = 1/f
Where, q = Image distance So, for the real image:
q = s = 4.4 m
Substituting the values in the mirror formula, we get:
1/p + 1/4.4 = 1/f…(i)
Also, from the magnification formula:
M = -q/p
Substituting the values, we get:
-5.9 = -4.4/p
So, the object distance is: p = 0.7458 m
Substituting this value in equation (i), we get:
1/0.7458 + 1/4.4 = 1/f
Solving further, we get:
f = -0.567 m
Since the focal length is negative, the mirror is a concave mirror.
Therefore, the radius of curvature of the mirror is:
R = 2f
R = 2 x (-0.567) m
R = -1.13 m
R ≈ -1.1 m
Where should the mirror be positioned relative to the object? We know that the object distance (p) is given by:
p = -q/M Substituting the given values, we get:
p = -4.4 / 5.9
p = -0.7458 m
We know that the mirror is to be placed between the object and its focus. So, the mirror should be positioned at a distance of 0.7458 m from the object.
Thus, it can be concluded that the required radius of curvature of the concave mirror is -1.1 m. The concave mirror is to be positioned at a distance of 0.7458 m from the object.
to know more about mirror visit:
brainly.com/question/1160148
#SPJ11
Someone who is both nearsighted and farsighted can be prescribed bifocals, which allow the patient to view distant objects when looking through the top of the glasses and close objects when looking through the bottom of the glasses. Suppose a particular bifocal
prescription is for glasses with refractive powers +3D and -0.2D. a. What is the patient's near point? Support your mathematics with a clear ray
diagram.
b.
What is the patient's far point? Support your mathematics with a clear ray diagram.
a. The patient's near point is approximately 0.33 meters.
b. The patient's far point is approximately 5 meters.
a. The patient's near point can be determined using the formula:
Near Point = 1 / (Refractive Power in diopters)
Given that the refractive power for the top part of the bifocal glasses is +3D, the near point can be calculated as follows:
Near Point = 1 / (+3D) = 1/3 meters = 0.33 meters
To support this calculation with a ray diagram, we can consider that the near point is the closest distance at which the patient can focus on an object. When looking through the top part of the glasses, the rays of light from a nearby object would converge at a point that is 0.33 meters away from the patient's eyes. This distance represents the near point.
b. The patient's far point can be determined using the formula:
Far Point = 1 / (Refractive Power in diopters)
Given that the refractive power for the bottom part of the bifocal glasses is -0.2D, the far point can be calculated as follows:
Far Point = 1 / (-0.2D) = -5 meters
To support this calculation with a ray diagram, we can consider that the far point is the farthest distance at which the patient can focus on an object. When looking through the bottom part of the glasses, the rays of light from a distant object would appear to be coming from a point that is 5 meters away from the patient's eyes. This distance represents the far point.
Please note that the negative sign indicates that the far point is located at a distance in front of the patient's eyes.
learn more about "patient":- https://brainly.com/question/25960579
#SPJ11
if an eye is farsighted the image defect is:
a) distant objects image is formed in front of the retina
b) near objects image is formed behind the retina
c) lens of the eye cannot focus on distant objects
d) two of the above
If an eye is farsighted the image defect is that distant objects image is formed in front of the retina. Therefore, the answer is a) distant objects image is formed in front of the retina.
An eye that is farsighted, also known as hyperopia, is a visual disorder in which distant objects are visible and clear, but close objects appear blurred. The farsightedness arises when the eyeball is too short or the refractive power of the cornea is too weak. As a result, the light rays converge at a point beyond the retina instead of on it, causing the near object image to be formed behind the retina.
Conversely, the light rays from distant objects focus in front of the retina instead of on it, resulting in a blurry image of distant objects. Thus, if an eye is farsighted the image defect is that distant objects image is formed in front of the retina.
To learn more about retina visit;
https://brainly.com/question/15141911
#SPJ11
a helicopter drop a package down at a constant speed 5m/s. When the package at 100m away from the helicopter, a stunt person fall out the helicopter. How long he catches the package? How fast is he?
In a planned stunt for a movie, a supply package with a parachute is dropped from a stationary helicopter and falls straight down at a constant speed of 5 m/s. A stuntperson falls out the helicopter when the package is 100 m below the helicopter. (a) Neglecting air resistance on the stuntperson, how long after they leave the helicopter do they catch up to the package? (b) How fast is the stuntperson going when they catch up? 2.) In a planned stunt for a movie, a supply package with a parachute is dropped from a stationary helicopter and falls straight down at a constant speed of 5 m/s. A stuntperson falls out the helicopter when the package is 100 m below the helicopter. (a) Neglecting air resistance on the stuntperson, how long after they leave the helicopter do they catch up to the package? (b) How fast is the stuntperson going when they catch up?
The stuntperson catches up to the package 20 seconds after leaving the helicopter.The stuntperson is traveling at a speed of 25 m/s when they catch up to the package.
To determine the time it takes for the stuntperson to catch up to the package, we can use the fact that the package is falling at a constant speed of 5 m/s. Since the stuntperson falls out of the helicopter when the package is 100 m below, it will take 20 seconds (100 m ÷ 5 m/s) for the stuntperson to reach that point and catch up to the package.
In this scenario, since the stuntperson falls straight down without any horizontal motion, they will have the same vertical velocity as the package. As the package falls at a constant speed of 5 m/s, the stuntperson will also have a downward velocity of 5 m/s.
When the stuntperson catches up to the package after 20 seconds, their velocity will still be 5 m/s, matching the speed of the package. Therefore, the stuntperson is traveling at a speed of 25 m/s (5 m/s downward speed plus the package's 20 m/s downward speed) when they catch up to the package.
Learn more about Speed
brainly.com/question/17661499
#SPJ11
In a photoelectric effect experiment, a metal with a work function of 1.4 eV is used.
What is the maximum wavelength of light that can be used to free electrons from the metal?
Enter your answer in micrometres (10-6 m) to two decimal places but do not enter the units in your response.
The energy of a photon of light is given by
E = hc/λ,
where
h is Planck's constant,
c is the speed of light and
λ is the wavelength of the light.
The photoelectric effect can occur only if the energy of the photon is greater than or equal to the work function (φ) of the metal.
Thus, we can use the following equation to determine the maximum wavelength of light that can be used to free electrons from the metal:
hc/λ = φ + KEmax
Where KEmax is the maximum kinetic energy of the electrons emitted.
For the photoelectric effect,
KEmax = hf - φ
= hc/λ - φ
We can substitute this expression for KEmax into the first equation to get:
hc/λ = φ + hc/λ - φ
Solving for λ, we get:
λmax = hc/φ
where φ is the work function of the metal.
Substituting the given values:
Work function,
φ = 1.4 e
V = 1.4 × 1.6 × 10⁻¹⁹ J
= 2.24 × 10⁻¹⁸ J
Speed of light, c = 3 × 10⁸ m/s
Planck's constant,
h = 6.626 × 10⁻³⁴ J s
We get:
λmax = hc/φ
= (6.626 × 10⁻³⁴ J s)(3 × 10⁸ m/s)/(2.24 × 10⁻¹⁸ J)
= 8.84 × 10⁻⁷ m
= 0.884 µm (to two decimal places)
Therefore, the maximum wavelength of light that can be used to free electrons from the metal is 0.884 µm.
To know more about wavelength visit:
https://brainly.com/question/31143857
#SPJ11
1. In what pattern does electricity flow in an AC circuit? A. dash B. dots C. straight D. wave 2. How does an electron move in a DC? A. negative to positive B. negative to negative C. posititve to negative D. positive to positive 3. In what type of LC circuit does total current be equal to the current of inductor and capacitor? A. series LC circuit B. parallel LC circuit C. series-parallel LC circuit D. all of the above 4. In what type of LC circuit does total voltage is equal to the current of inductor and capacitor? A. series LC circuit B. parallel LC circuit NG PASIC OF PASIG VOISINIO אני אמות KALAKHAN IA CITY MAYNILA 1573 PASIG CITY C. series-parallel LC circuit D. all of the above 5. If the capacitance in the circuit is increased, what will happen to the frequency?? A. increase B. decrease C. equal to zero D. doesn't change
Answer:
1.) D. wave
In an AC circuit, the electric current flows back and forth, creating a wave-like pattern.
2.) A. negative to positive
In a DC circuit, electrons flow from the negative terminal of a battery to the positive terminal.
3.) A. series LC circuit
In a series LC circuit, the current through the inductor and capacitor are equal and in the same direction.
4.) B. parallel LC circuit
In a parallel LC circuit, the voltage across the inductor and capacitor are equal and in the opposite direction.
5.) B. decrease
As the capacitance in a circuit increases, the resonant frequency decreases.
Explanation:
AC circuits: AC circuits are circuits that use alternating current (AC). AC is a type of electrical current that flows back and forth, reversing its direction at regular intervals. The frequency of an AC circuit is the number of times the current reverses direction per second.
DC circuits: DC circuits are circuits that use direct current (DC). DC is a type of electrical current that flows in one direction only.
LC circuits: LC circuits are circuits that contain an inductor and a capacitor. The inductor stores energy in the form of a magnetic field, and the capacitor stores energy in the form of an electric field. When the inductor and capacitor are connected together, they can transfer energy back and forth between each other, creating a resonant frequency.
Resonant frequency: The resonant frequency of a circuit is the frequency at which the circuit's impedance is minimum. The resonant frequency of an LC circuit is determined by the inductance of the inductor and the capacitance of the capacitor.
Learn more about Electricity.
https://brainly.com/question/33261230
#SPJ11
5) A beaker contains 2 grams of ice at a temperature of -10°C. The mass of the beaker may be ignored. Heat is supplied to the beaker at a constant rate of 2200J/minute. The specific heat of ice is 2100 J/kgk and the heat of fusion for ice is 334 x103 J/kg. How much time passes before the ice starts to melt? (8 pts)
The time it takes for the ice to start melting is approximately 8.22 minutes.
To calculate the time before the ice starts to melt, we need to consider the heat required to raise the temperature of the ice from -10°C to its melting point (0°C) and the heat of fusion required to convert the ice at 0°C to water at the same temperature.
First, we calculate the heat required to raise the temperature of 2 grams of ice from -10°C to 0°C using the specific heat formula Q = m * c * ΔT, where Q is the heat, m is the mass, c is the specific heat, and ΔT is the change in temperature. Substituting the given values, we get Q1 = 2 g * 2100 J/kg°C * (0°C - (-10°C)) = 42000 J.
Next, we calculate the heat of fusion required to convert the ice to water at 0°C using the formula Q = m * Hf, where Q is the heat, m is the mass, and Hf is the heat of fusion. Substituting the given values, we get Q2 = 2 g * 334 x 10³ J/kg = 668000 J.
Now, we sum up the heat required for temperature rise and the heat of fusion: Q_total = Q1 + Q2 = 42000 J + 668000 J = 710000 J.
Finally, we divide the total heat by the heat supplied per minute to obtain the time: t = Q_total / (2200 J/minute) ≈ 322.73 minutes ≈ 8.22 minutes.
Therefore, it takes approximately 8.22 minutes for the ice to start melting when heat is supplied at a constant rate of 2200 J/minute.
learn more about heat of fusion here:
https://brainly.com/question/30403515
#SPJ11
For a certain choice of origin, the third antinode in a standing wave occurs at x3=4.875m while the 10th antinode occurs at x10=10.125 m. The wavelength, in m, is: 1.5 O None of the listed options 0.75 0.375
The third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m hence the wavelength is 0.75.
Formula used:
wavelength (n) = (xn - x3)/(n - 3)where,n = 10 - 3 = 7xn = 10.125m- 4.875m = 5.25 m
wavelength(n) = (5.25)/(7)wavelength(n) = 0.75m
Therefore, the wavelength, in m, is 0.75.
Given, the third antinode in a standing wave occurs at x3=4.875 m and the 10th antinode occurs at x10=10.125 m.
We have to find the wavelength, in m. The wavelength is the distance between two consecutive crests or two consecutive troughs. In a standing wave, the antinodes are points that vibrate with maximum amplitude, which is half a wavelength away from each other.
The third antinode in a standing wave occurs at x3=4.875m. Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x3 + λ/2. Let us assume that the 10th antinode in a standing wave occurs at x10=10.125m.
Let us assume that this point corresponds to a crest. Therefore, a trough will occur at a distance of half a wavelength, which is x10 + λ/2.
Let us consider the distance between the two troughs:
(x10 + λ/2) - (x3 + λ/2) = x10 - x3λ = (x10 - x3) / (10-3)λ = (10.125 - 4.875) / (10-3)λ = 5.25 / 7λ = 0.75m
Therefore, the wavelength, in m, is 0.75.
To know more about antinode visit
brainly.com/question/3838585
#SPJ11
What is the frequency of the most intense radiation emitted by your body? Assume a skin temperature of 95 °F. Express your answer to three significant figures.
The frequency of the most intense radiation emitted by your body is approximately 3.19 × 10^13 Hz.
To determine the frequency of the most intense radiation emitted by your body, we can use Wien's displacement law, which relates the temperature of a black body to the wavelength at which it emits the most intense radiation.
The formula for Wien's displacement law is:
λ_max = (b / T)
Where λ_max is the wavelength of maximum intensity, b is Wien's displacement constant (approximately 2.898 × 10^-3 m·K), and T is the temperature in Kelvin.
First, let's convert the skin temperature of 95 °F to Kelvin:
T = (95 + 459.67) K ≈ 308.15 K
Now, we can calculate the wavelength of maximum intensity using Wien's displacement law:
λ_max = (2.898 × 10^-3 m·K) / 308.15 K
Calculating this expression, we find:
λ_max ≈ 9.41 × 10^-6 m
To find the frequency, we can use the speed of light formula:
c = λ * f
Where c is the speed of light (approximately 3 × 10^8 m/s), λ is the wavelength, and f is the frequency.
Rearranging the formula to solve for frequency:
f = c / λ_max
Substituting the values, we have:
f ≈ (3 × 10^8 m/s) / (9.41 × 10^-6 m)
Calculating this expression, we find:
f ≈ 3.19 × 10^13 Hz
Therefore, the frequency of the most intense radiation emitted by your body is approximately 3.19 × 10^13 Hz.
Learn more about wavelength:
https://brainly.com/question/10750459
#SPJ11
As an electromagnetic wave travels through free space, its speed can be increased by: Increasing its energy. Increasing its frequency. Increasing its momentum None of the above will increase its speed
The speed of an electromagnetic wave is determined by the permittivity and permeability of free space, and it is constant. As a result, none of the following can be used to increase its speed.
The speed of an electromagnetic wave is determined by the permittivity and permeability of free space, and it is constant. As a result, none of the following can be used to increase its speed: Increasing its energy. Increasing its frequency. Increasing its momentum. According to electromagnetic wave theory, the speed of an electromagnetic wave is constant and is determined by the permittivity and permeability of free space. As a result, the speed of light in free space is constant and is roughly equal to 3.0 x 10^8 m/s (186,000 miles per second).
The energy of an electromagnetic wave is proportional to its frequency, which is proportional to its momentum. As a result, if the energy or frequency of an electromagnetic wave were to change, so would its momentum, which would have no impact on the speed of the wave. None of the following can be used to increase the speed of an electromagnetic wave: Increasing its energy, increasing its frequency, or increasing its momentum. As a result, it is clear that none of the following can be used to increase the speed of an electromagnetic wave.
To know more about electromagnetic visit
https://brainly.com/question/32967158
#SPJ11
A weather balloon is filled to a volume of 12.68 ft3 on Earth's surface at a measured temperature of 21.87 C and a pressure of 1.02 atm. The weather balloon is let go and drifts away from the Earth. At the top of the troposphere, the balloon experiences a temperature of -64.19 C and a pressure of 0.30 atm. What is the volume, in liters, of this weather balloon at the top of the troposphere? Round your final answer to two decimal places.
The volume of the weather balloon at the top of the troposphere is approximately 10.22 liters.
Explanation:
Step 1: The volume of the weather balloon at the top of the troposphere is approximately 10.22 liters.
Step 2:
To calculate the volume of the weather balloon at the top of the troposphere, we need to apply the ideal gas law, which states that the product of pressure and volume is directly proportional to the product of the number of moles and temperature. Mathematically, this can be represented as:
(P1 * V1) / (T1 * n1) = (P2 * V2) / (T2 * n2)
Here, P1 and P2 represent the initial and final pressures, V1 and V2 represent the initial and final volumes, T1 and T2 represent the initial and final temperatures, and n1 and n2 represent the number of moles (which remain constant in this case).
Given the initial conditions on Earth's surface: P1 = 1.02 atm, V1 = 12.68 ft3, and T1 = 21.87 °C, we need to convert the volume from cubic feet to liters and the temperature from Celsius to Kelvin for the equation to work properly.
Converting the volume from cubic feet to liters, we have:
V1 = 12.68 ft3 * 28.3168466 liters/ft3 ≈ 358.99 liters
Converting the temperature from Celsius to Kelvin, we have:
T1 = 21.87 °C + 273.15 ≈ 295.02 K
Similarly, for the final conditions at the top of the troposphere: P2 = 0.30 atm and T2 = -64.19 °C + 273.15 ≈ 208.96 K.
Rearranging the ideal gas law equation, we can solve for V2:
V2 = (P2 * V1 * T2) / (P1 * T1)
Substituting the values, we have:
V2 = (0.30 atm * 358.99 liters * 208.96 K) / (1.02 atm * 295.02 K) ≈ 10.22 liters
Therefore, the volume of the weather balloon at the top of the troposphere is approximately 10.22 liters.
Learn more about:
The ideal gas law is a fundamental principle in physics and chemistry that relates the properties of gases, such as pressure, volume, temperature, and number of moles. It is expressed by the equation PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.
In this context, we used the ideal gas law to calculate the volume of the weather balloon at the top of the troposphere. By applying the law and considering the initial and final conditions, we were able to determine the final volume.
The conversion from cubic feet to liters is necessary because the initial volume was given in cubic feet, while the ideal gas law equation requires volume in liters. The conversion factor used was 1 ft3 = 28.3168466 liters.
Additionally, the conversion from Celsius to Kelvin is essential as the ideal gas law requires temperature to be in Kelvin. The conversion formula is simple: K = °C + 273.15.
By following these steps and performing the necessary calculations, we obtained the final volume of the weather balloon at the top of the troposphere as approximately 10.22 liters.
#SPJ11
1.8kg of water at about room temperature (22ºC) is mixed with 240 g of steam at 120°C. Determine the final temperature of the water. The specific heat capacity of water is 4186 J/kg/°C
By heat transfer the final temperature of water is 27.85⁰C.
The heat transfer to raise the temperature by ΔT of mass m is given by the formula:
Q = m× C × ΔT
Where C is the specific heat of the material.
Given information:
Mass of water, m₁ = 1.8kg
The temperature of the water, T₁ =22°C
Mass of steam, m₂ = 240g or 0.24kg
The temperature of the steam, T₂ = 120⁰C
Specific heat of water, C₁ = 4186 J/kg/°C
Let the final temperature of the mixture be T.
Heat given by steam + Heat absorbed by water = 0
m₂C₂(T-T₂) + m₁C₁(T-T₁) =0
0.24×1996×(T-120) + 1.8×4186×(T-22) = 0
479.04T -57484.8 + 7534.8T - 165765.6 =0
8013.84T =223250.4
T= 27.85⁰C
Therefore, by heat transfer the final temperature of water is 27.85⁰C.
To know more about heat transfer, click here:
https://brainly.com/question/31065010
#SPJ4
A muon with a lifetime of 2 × 10−6 second in its frame of reference is created in the upper atmosphere with a velocity of 0.998 c toward the Earth. What is the lifetime of this muon as mea- sured by an observer on the Earth? 1.T =3×10−5 s 2.T =3×10−6 s 3.T =3×10−4 s 4.T =3×10−3 s 5.T =3×10−2 s
The lifetime of the muon as measured by an observer on Earth is approximately 3 × 10^−6 seconds (Option 2).
When the muon is moving at a velocity of 0.998c towards the Earth, time dilation occurs due to relativistic effects, causing the muon's lifetime to appear longer from the Earth's frame of reference.
Time dilation is a phenomenon predicted by Einstein's theory of relativity, where time appears to slow down for objects moving at high velocities relative to an observer. The formula for time dilation is T' = T / γ, where T' is the measured lifetime of the muon, T is the proper lifetime in its frame of reference, and γ (gamma) is the Lorentz factor.
In this case, the Lorentz factor can be calculated using the formula γ = 1 / sqrt(1 - (v^2 / c^2)), where v is the velocity of the muon (0.998c) and c is the speed of light. Plugging in the values, we find γ ≈ 14.14.
By applying time dilation, T' = T / γ, we get T' = 2 × 10^−6 s / 14.14 ≈ 1.415 × 10^−7 s. However, we need to convert this result to the proper lifetime as measured by the Earth observer. Since the muon is moving towards the Earth, its lifetime appears longer due to time dilation. Therefore, the measured lifetime on Earth is T' = 1.415 × 10^−7 s + 2 × 10^−6 s = 3.1415 × 10^−6 s ≈ 3 × 10^−6 s.
Hence, the lifetime of the muon as measured by an observer on Earth is approximately 3 × 10^−6 seconds (Option 2).
Learn more about muon here:
brainly.com/question/30549179
#SPJ11
Part A A stone is thrown vertically upward with a speed of 15.6 m/s from the edge of a cliff 75.0 m high (Figure 1). How much later does it reach the bottom of the cliff? Express your answer to three significant figures and include the appropriate units. + OI? f Value Units Submit Request Answer - Part B What is its speed just before hitting? Express your answer to three significant figures and include the appropriate units. Value Units Submit Request Answer - Part What total distance did it travel? Express your answer to three significant figures and include the appropriate units. + 2 123 Figure 1 of 1 Value Units Submit Request Answer Provide Feedback
The stone reaches the bottom of the cliff approximately 4.20 seconds later. The speed just before hitting the bottom is approximately 40.6 m/s.
Part A: To find how much later the stone reaches the bottom of the cliff, we can use the kinematic equation for vertical motion. The equation is:
h = ut + (1/2)gt^2
Where:
h = height of the cliff (75.0 m, negative since it's downward)
u = initial velocity (15.6 m/s)
g = acceleration due to gravity (-9.8 m/s^2, negative since it's downward)
t = time
Plugging in the values, we get:
-75.0 = (15.6)t + (1/2)(-9.8)t^2
Solving this quadratic equation, we find two values for t: one for the stone going up and one for it coming down. We're interested in the time it takes for it to reach the bottom, so we take the positive value of t. Rounded to three significant figures, the time it takes for the stone to reach the bottom of the cliff is approximately 4.20 seconds.
Part B: The speed just before hitting the bottom can be found using the equation for final velocity in vertical motion:
v = u + gt
Where:
v = final velocity (what we want to find)
u = initial velocity (15.6 m/s)
g = acceleration due to gravity (-9.8 m/s^2, negative since it's downward)
t = time (4.20 s)
Plugging in the values, we get:
v = 15.6 + (-9.8)(4.20)
Calculating, we find that the speed just before hitting is approximately -40.6 m/s. Since speed is a scalar quantity, we take the magnitude of the value, giving us a speed of approximately 40.6 m/s.
Part C: To find the total distance traveled by the stone, we need to calculate the distance covered during the upward motion and the downward motion separately, and then add them together.
Distance covered during upward motion:
Using the equation for distance covered in vertical motion:
s = ut + (1/2)gt^2
Where:
s = distance covered during upward motion (what we want to find)
u = initial velocity (15.6 m/s)
g = acceleration due to gravity (-9.8 m/s^2, negative since it's downward)
t = time (4.20 s)
Plugging in the values, we get:
s = (15.6)(4.20) + (1/2)(-9.8)(4.20)^2
Calculating, we find that the distance covered during the upward motion is approximately 33.1 m.
Distance covered during downward motion:
Since the stone comes back down to the bottom of the cliff, the distance covered during the downward motion is equal to the height of the cliff, which is 75.0 m.
Total distance traveled:
Adding the distance covered during the upward and downward motion, we get:
Total distance = 33.1 + 75.0
Rounded to three significant figures, the total distance traveled by the stone is approximately 108 m.
To know more about distance:
https://brainly.com/question/13034462
#SPJ11
The isotope, Cobalt 57, decays by electron capture to Iron 57 with a half life of 272 days. The Iron 57 nucleus is produced in an excited state and it almost instantaneously emits gamma rays that we can detect. Find the mean lifetime and decay constant for Cobalt 57. . 1st, convert half life from days to seconds. T1/2 = 272 days (in seconds) Tmean = T1/2/In2 (in days) X = 1/Tmean (decay constant) . . O 682 days, 2.05 x 10-6-1 O 392 days, 2.95 x 108 1 O 216 days, 4.12 x 10-851 O No answer text provided. Which scan has the most dangerous levels of radiation exposure? O No answer text provided. OCT MRI OPET
The question asks for the mean lifetime and decay constant of Cobalt 57, which decays by electron capture to Iron 57 with a half-life of 272 days. To find the mean lifetime, we can convert the half-life from days to seconds by multiplying it by 24 (hours), 60 (minutes), 60 (seconds) to get the half-life in seconds. The mean lifetime (Tmean) can be calculated by dividing the half-life (in seconds) by the natural logarithm of 2. The decay constant (X) is the reciprocal of the mean lifetime (1/Tmean).
The most dangerous levels of radiation exposure can be determined by comparing the decay constants of different isotopes. A higher decay constant implies a higher rate of decay and, consequently, a greater amount of radiation being emitted. Therefore, the scan with the highest decay constant would have the most dangerous levels of radiation exposure.
Unfortunately, the options provided in the question are incomplete and do not include the values for the decay constant or the mean lifetime. Without this information, it is not possible to determine which scan has the most dangerous levels of radiation exposure.
Learn more about electron :
https://brainly.com/question/12001116
#SPJ11
A beam of light reflects and refracts at point A on the interface between material 1 (n1 = 1.33) and material 2 (n2 = 1.66). The incident beam makes an angle of 40° with the interface. What is the angle of reflection at point A?
The angle of reflection at point A is 40°, which is equal to the angle of incidence.
When a beam of light encounters an interface between two different materials, it undergoes reflection and refraction. The angle of incidence, which is the angle between the incident beam and the normal to the interface, is equal to the angle of reflection, which is the angle between the reflected beam and the normal to the interface.
In this case, the incident beam makes an angle of 40° with the interface, so the angle of reflection at point A is also 40°. When light travels from one medium to another, it changes its direction due to the change in speed caused by the change in refractive index.
The law of reflection states that the angle of incidence is equal to the angle of reflection. This means that the angle at which the light ray strikes the interface is the same as the angle at which it bounces off the interface.
In this scenario, the incident beam of light strikes the interface between material 1 and material 2 at an angle of 40°. According to the law of reflection, the angle of reflection is equal to the angle of incidence, so the light ray will bounce off the interface at the same 40° angle with respect to the normal.
Learn more about reflection
brainly.com/question/30031394
#SPJ11
Suppose that you built the circuit given in Figure 3-2 of your lab instructions with slide wire of total length 7.7cm and try to experimentally determine the value of the unknown resistance Rx where Rc is 7.3. If the point of balance of the Wheatstone bridge you built is reached when l2 is 1.8 cm , calculate the experimental value for Rx. Give your answer in units of Ohms with 1 decimal.
In the circuit given in Figure 3-2 of your lab instructions with slide wire of total length 7.7cm, we need to experimentally determine the value of the unknown resistance Rx where Rc is 7.3.
If the point of balance of the Wheatstone bridge we built is reached when l2 is 1.8 cm, we have to calculate the experimental value for Rx.
The Wheatstone bridge circuit shown in Figure 3-2 is balanced when the potential difference across point B and D is zero.
This happens when R1/R2 = Rx/R3. Thus, the resistance Rx can be determined as:
Rx = (R1/R2) * R3, where R1, R2, and R3 are the resistances of the resistor in the circuit.
To find R2, we use the slide wire of total length 7.7 cm. We can say that the resistance of the slide wire is proportional to its length.
Thus, the resistance of wire of length l1 would be (R1 / 7.7) l1, and the resistance of wire of length l2 would be (R2 / 7.7) l2.
Using these formulas, the value of R2 can be calculated:
R1 / R2 = (l1 - l2) / l2 => R2
= R1 * l2 / (l1 - l2)
= 3.3 * 1.8 / (7.7 - 1.8)
= 0.905 Ω.
Now that we know the value of R2, we can calculate the value of Rx:Rx = (R1 / R2) * R3 = (3.3 / 0.905) * 7.3 = 26.68 Ω
Therefore, the experimental value for Rx is 26.7 Ω.
To know more about resistance visit:
https://brainly.com/question/32301085
#SPJ11
[5:26 pm, 13/05/2022] Haris Abbasi: a) The 10-kg collar has a velocity of 5 m/s to the right when it is at A. It then travels along the
smooth guide. Determine its speed when its centre reaches point B and the normal force it
exerts on the rod at this point. The spring has an unstretched length of 100 mm and B is located
just before the end of the curved portion of the rod. The whole system is in a vertical plane. (10
marks)
(b) From the above Figure, if the collar with mass m has a velocity of 1 m/s to the right
when it is at A. It then travels along the smooth guide. It stop at Point B. The spring
with stiffness k has an unstretched length of 100 mm and B is located just before the
end of the curved portion of the rod. The whole system is in a vertical plane. Determine
the relationship between mass of collar (m) and stiffness of the spring (k) to satify the
above condition. (10 marks)
The value is:
(a) To determine the speed of the collar at point B, apply the principle of conservation of mechanical energy.
(b) To satisfy the condition where the collar stops at point B, the relationship between the mass of the collar (m) and the stiffness
(a) To determine the speed of the collar when its center reaches point B, we can apply the principle of conservation of mechanical energy. Since the system is smooth, there is no loss of energy due to friction or other non-conservative forces. Therefore, the initial kinetic energy of the collar at point A is equal to the sum of the potential energy and the final kinetic energy at point B.
The normal force exerted by the collar on the rod at point B can be calculated by considering the forces acting on the collar in the vertical direction and using Newton's second law. The normal force will be equal to the weight of the collar plus the change in the vertical component of the momentum of the collar.
(b) In this scenario, the collar stops at point B. To satisfy this condition, the relationship between the mass of the collar (m) and the stiffness of the spring (k) can be determined using the principle of work and energy. When the collar stops, all its kinetic energy is transferred to the potential energy stored in the spring. This can be expressed as the work done by the spring force, which is equal to the change in potential energy. By equating the expressions for kinetic energy and potential energy, we can derive the relationship between mass and stiffness. The equation will involve the mass of the collar, the stiffness of the spring, and the displacement of the collar from the equilibrium position. Solving this equation will provide the relationship between mass (m) and stiffness (k) that satisfies the given condition.
To know more about mass:
https://brainly.com/question/11954533
#SPJ11
Three resistors, each having a resistance of 30 Q2, are connected in parallel with each other. What is the value of their effective resistance? A string of 50 identical tree lights connected in series dissipates 100 W when connected to a 120 V power outlet. What is the equivalent resistance of the string?
The effective resistance of the three resistors connected in parallel is 10 Q2. To find the effective resistance of resistors connected in parallel, you can use the formula:
1/Req = 1/R1 + 1/R2 + 1/R3 + ...
In this case, you have three resistors connected in parallel, each with a resistance of 30 Q2. So, we can substitute these values into the formula:
1/Req = 1/30 Q2 + 1/30 Q2 + 1/30 Q2
1/Req = 3/30 Q2
1/Req = 1/10 Q2
Req = 10 Q2
Therefore, the effective resistance of the three resistors connected in parallel is 10 Q2.
Learn more about resistance here : brainly.com/question/32301085
#SPJ11
All work/steps must be shown following the "Problem-Solving Procedure". Part II - Short Problems −4 points 1. Find the ' x ' and ' y ' components of the following vectors. a. F=67.9 N,38∘ b. v=8.76 m/s,−57.3∘ 2. Determine the 'polar coordinate' form of the following vector components. a. Ax=7.87 mAy=−8.43 m b. vx=−67.3 m/svy=−24.9 m/s
In problem 1, the x and y components of the vector F are found to be 50.19 N and 51.95 N, respectively. In problem 2, the polar coordinate form of vector A is determined to be 11.01 m at an angle of -48.92 degrees, while vector v is expressed as 76.46 m/s at an angle of -197.65 degrees.
In problem 1a, the vector force F, is given with a magnitude of 67.9 N and an angle of 38 degrees. To find the x and y components, we use the trigonometric functions cosine (cos) and sine (sin).
The x component is calculated as Fx = F * cos(θ), where θ is the angle, yielding Fx = 67.9 N * cos(38°) = 50.19 N. Similarly, the y component is determined as Fy = F * sin(θ), resulting in Fy = 67.9 N * sin(38°) = 51.95 N.
In problem 1b, the vector v is given with a magnitude of 8.76 m/s and an angle of -57.3 degrees. Using the same trigonometric functions, we can find the x and y components.
The x component is calculated as vx = v * cos(θ), which gives vx = 8.76 m/s * cos(-57.3°) = 4.44 m/s. The y component is determined as vy = v * sin(θ), resulting in vy = 8.76 m/s * sin(-57.3°) = -7.37 m/s.
In problem 2a, the vector components Ax = 7.87 m and Ay = -8.43 m are given. To express this vector in polar coordinate form, we can use the Pythagorean theorem to find the magnitude (r) of the vector, which is r = √(Ax^2 + Ay^2).
Substituting the given values, we obtain r = √((7.87 m)^2 + (-8.43 m)^2) ≈ 11.01 m. The angle (θ) can be determined using the inverse tangent function, tan^(-1)(Ay/Ax), which gives θ = tan^(-1)(-8.43 m/7.87 m) ≈ -48.92 degrees.
Therefore, the polar coordinate form of vector A is approximately 11.01 m at an angle of -48.92 degrees.In problem 2b, the vector components vx = -67.3 m/s and vy = -24.9 m/s are given.
Following a similar procedure as in problem 2a, we find the magnitude of the vector v as r = √(vx^2 + vy^2) = √((-67.3 m/s)^2 + (-24.9 m/s)^2) ≈ 76.46 m/s.
The angle θ can be determined using the inverse tangent function, tan^(-1)(vy/vx), resulting in θ = tan^(-1)(-24.9 m/s/-67.3 m/s) ≈ -197.65 degrees. Hence, the polar coordinate form of vector v is approximately 76.46 m/s at an angle of -197.65 degrees.
Learn more about force here ;
https://brainly.com/question/30507236
#SPJ11
An ideal gas with molecules of mass \( \mathrm{m} \) is contained in a cube with sides of area \( \mathrm{A} \). The average vertical component of the velocity of the gas molecule is \( \mathrm{v} \),
This equation relates the average vertical velocity to the temperature and the mass of the gas molecules.
In an ideal gas contained in a cube, the average vertical component of the velocity of the gas molecules is given by the equation \( v = \sqrt{\frac{3kT}{m}} \), where \( k \) is the Boltzmann constant, \( T \) is the temperature, and \( m \) is the mass of the gas molecules.
The average vertical component of the velocity of gas molecules in an ideal gas can be determined using the kinetic theory of gases. According to this theory, the kinetic energy of a gas molecule is directly proportional to its temperature. The root-mean-square velocity of the gas molecules is given by \( v = \sqrt{\frac{3kT}{m}} \), where \( k \) is the Boltzmann constant, \( T \) is the temperature, and \( m \) is the mass of the gas molecules.
This equation shows that the average vertical component of the velocity of the gas molecules is determined by the temperature and the mass of the molecules. As the temperature increases, the velocity of the gas molecules also increases.
Similarly, if the mass of the gas molecules is larger, the velocity will be smaller for the same temperature. The equation provides a quantitative relationship between these variables, allowing us to calculate the average vertical velocity of gas molecules in a given system.
Learn more about velocity here: brainly.com/question/30559316
#SPJ11
Consider a right angled triangle: h=Hyoptenuse a=Adjacent o=opposite Which of the following is true? O h²=o²+ a² 0 √h=√a+√o Oh=o+a Oo=a+h
The correct mathematical representation is h²=o²+ a² . Option A
How to determine the expressionFirst, we need to know that the Pythagorean theorem states that the square of the longest side of a triangle is equal to the sum of the squares of the other two sides of the triangle.
This is expressed as;
h² = o² + a²
Such that the parameters of the formula are given as;
h is the hypotenuse side of the trianglea is the adjacent side of the triangleo is the opposite side of the triangleLearn more about Pythagorean theorem at: https://brainly.com/question/343682
#SPJ4
The magnetic flux through a coil containing 10 loops changes
from 10Wb to −20W b in 0.02s. Find the induced voltage ε.
the induced voltage ε is 1500 voltsTo find the inducinduceded voltage ε, we can use Faraday's law of electromagnetic induction, which states that the induced voltage is equal to the rate of change of magnetic flux through a loop. Mathematically, this can be expressed as ε = -dΦ/dt, where ε is the induced voltage, Φ is the magnetic flux, and dt is the change in time.
Given that the magnetic flux changes from 10 Wb to -20 Wb in 0.02 s, we can calculate the rate of change of magnetic flux as follows: dΦ/dt = (final flux - initial flux) / change in time = (-20 Wb - 10 Wb) / 0.02 s = -1500 Wb/s.
Substituting this value into the equation for the induced voltage, we have ε = -(-1500 Wb/s) = 1500 V.
Therefore, the induced voltage ε is 1500 volts.
To learn more about flux click here:brainly.com/question/31607470
#SPJ11
Given
Feed flow rate, F=100 kg/hr
Solvent flow rate, S=120 kg/hr
Mole fraction of acetone in feed, xF=0.35
Mole fraction of acetone in solvent, yS=0
M is the combined mixture of F and S.
M is the combined mixture of F and S.
xM is the mole fraction of acetone in M
xM =(FxF + SyS)/(F+S)
xM =(100*0.35+120*0)/(100+120)
xM =0.1591
Since 99% of acetone is to be removed,
Acetone present in feed = FxF = 100*0.35=35 kg/hr
99% goes into the extract and 1% goes into the raffinate.
Component mass balance:-
Therefore, acetone present in extract=Ey1= 0.99*35=34.65 kg/hr
Acetone present in Raffinate=RxN=0.01*35=0.35 kg/hr
Total mass balance:-
220=R+E
From total mass balance and component mass balance, by hit trial method, R=26.457 kg/hr
Hence, E=220-26.457=193.543 kg/hr
Hence, xN = 0.35/26.457=0.01323
Hence, y1 =34.65/193.543 = 0.179
Equilibrium data for MIK, water, acetone mixture is obtained from "Mass Transfer, Theory and Applications" by K.V.Narayanan.
From the graph, we can observe that 4 lines are required from the Feed to reach Rn passing through the difference point D.
Hence the number of stages required = 4
4 stages are required for the liquid-liquid extraction process to achieve the desired separation.
Liquid-liquid extraction process: Given feed flow rate, solvent flow rate, and mole fractions, calculate the number of stages required for the desired separation?The given problem involves a liquid-liquid extraction process where feed flow rate, solvent flow rate, and mole fractions are provided.
Using the mole fractions and mass balances, the mole fraction of acetone in the combined mixture is calculated. Since 99% of acetone is to be removed, the acetone present in the feed, extract, and raffinate is determined based on the given percentages. Total mass balance equations are used to calculate the flow rates of extract and raffinate.
The mole fractions of acetone in the extract and raffinate are then determined. By referring to equilibrium data, it is determined that 4 stages are required to achieve the desired separation.
Learn more about liquid-liquid extraction
brainly.com/question/31039834
#SPJ11
How many electrons does carbon have? how many are valence electrons? what third-row element has the same number of valence electrons as carbon?
Carbon has 6 electrons. To determine the number of valence electrons, we need to look at the electron configuration of carbon, which is 1s² 2s² 2p². The third-row element that has the same number of valence electrons as carbon is silicon (Si).
In the case of carbon, the first shell (1s) is fully filled with 2 electrons, and the second shell (2s and 2p) contains the remaining 4 electrons. The 2s subshell can hold a maximum of 2 electrons, and the 2p subshell can hold a maximum of 6 electrons, but in carbon's case, only 2 of the 2p orbitals are occupied. These 4 electrons in the outermost shell, specifically the 2s² and 2p² orbitals, are called valence electrons. The electron configuration describes the distribution of electrons in the different energy levels or shells of an atom.
Therefore, carbon has 4 valence electrons. Valence electrons are crucial in determining the chemical properties and reactivity of an element, as they are involved in the formation of chemical bonds.
The third-row element that has the same number of valence electrons as carbon is silicon (Si). Silicon also has 4 valence electrons, which can be seen in its electron configuration of 1s² 2s² 2p⁶ 3s² 3p². Carbon and silicon are in the same group (Group 14) of the periodic table and share similar chemical properties due to their comparable valence electron configurations.
To learn more about, valence electrons, click here, https://brainly.com/question/31264554
#SPJ11
Carbon has 6 electrons in total, with 4 of them being valence electrons. Silicon is the third-row element that shares the same number of valence electrons as carbon.
Explanation:Carbon has 6 electrons in total. The electron configuration and orbital diagram for carbon are 1s²2s²2p¹, where the 1s and 2s orbitals are completely filled and the remaining two electrons occupy the 2p subshell. This means that carbon has 4 valence electrons.
The third-row element that has the same number of valence electrons as carbon is silicon (Si). Silicon also has 4 valence electrons.
Learn more about Electrons in Carbon here:https://brainly.com/question/33829891
#SPJ3
A diatomic ideal gas occupies 4.0 L and pressure of 100kPa. It is compressed adiabatically to 1/4th its original volume, then cooled at constant volume back to its original temperature. Finally, it is allowed to isothermally expand back to
its original volume.
A. Draw a PV diagram B. Find the Heat, Work, and Change in Energy for each process (Fill in Table). Do not assume anything about the net values to fill in the
values for a process.
C. What is net heat and work done?
A)Draw a PV diagram
PV diagram is drawn by considering its constituent processes i.e. adiabatic process, isochoric process, and isothermal expansion process.
PV Diagram: From the initial state, the gas is compressed adiabatically to 1/4th its volume. This is a curve process and occurs without heat exchange. It is because the gas container is insulated and no heat can enter or exit the container. The second process is cooling at a constant volume. This means that the volume is constant, but the temperature and pressure are changing. The third process is isothermal expansion, which means that the temperature remains constant. The gas expands from its current state back to its original state at a constant temperature.
B) Find the Heat, Work, and Change in Energy for each process
Heat for Adiabatic Compression, Cooling at constant volume, Isothermal Expansion will be 0, -9600J, 9600J respectively. work will be -7200J, 0J, 7200J respectively. Change in Energy will be -7200J, -9600J, 2400J.
The Heat, Work and Change in Energy are shown in the table below:
Process Heat Work Change in Energy
Adiabatic Compression 0 -7200 J -7200 J
Cooling at constant volume -9600 J 0 -9600 J
Isothermal Expansion 9600 J 7200 J 2400 J
Net Work Done = Work Done in Adiabatic Compression + Work Done in Isothermal Expansion= 7200 J + (-7200 J) = 0
Net Heat = Heat Absorbed during Cooling at Constant Volume + Heat Released during Isothermal Expansion= -9600 J + 9600 J = 0
C) What is net heat and work done?
The net heat and work done are both zero.
Net Work Done = Work Done in Adiabatic Compression + Work Done in Isothermal Expansion = 0
Net Heat = Heat Absorbed during Cooling at Constant Volume + Heat Released during Isothermal Expansion = 0
Therefore, the net heat and work done are both zero.
Learn more about work: https://brainly.in/question/22847362
#SPJ11
If an applied force on an object acts antiparallel to the direction of the object's movement, the work done on by the applied force is: Negative Cannot be determined by the problem. Positive Zero
If an applied force on an object acts antiparallel to the direction of the object's movement, the work done by the applied force is negative.
The transfer of energy from one object to another by applying a force to an object, which makes it move in the direction of the force is known as work. When the applied force acts in the opposite direction to the object's movement, the work done by the force is negative.
The formula for work is given by: Work = force x distance x cosθ where,θ is the angle between the applied force and the direction of movement. If the angle between force and movement is 180° (antiparallel), then cosθ = -1 and work done will be negative. Therefore, if an applied force on an object acts antiparallel to the direction of the object's movement, the work done by the applied force is negative.
Learn more about work done here:
https://brainly.com/question/32263955
#SPJ11
6. [-/1 Points] DETAILS SERPSE10 7.4.OP.010. At an archery event, a woman draws the string of her bow back 0.392 m with a force that increases steadily from 0 to 215 N. (a) What is the equivalent spring constant (in N/m) of the bow? N/m (b) How much work (in 3) does the archer do on the string in drawing the bow? 3. Need Help? Read It
The question asks for the equivalent spring constant of a bow and the amount of work done by an archer in drawing the bow. The woman draws the string of the bow back 0.392 m with a steadily increasing force from 0 to 215 N.
To determine the equivalent spring constant of the bow (a), we can use Hooke's Law, which states that the force exerted by a spring is directly proportional to its displacement. In this case, the displacement of the bowstring is given as 0.392 m, and the force increases steadily from 0 to 215 N. Therefore, we can calculate the spring constant using the formula: spring constant = force / displacement. Substituting the values, we have: spring constant = 215 N / 0.392 m = 548.47 N/m.
To calculate the work done by the archer on the string (b), we can use the formula: work = force × displacement. The force applied by the archer steadily increases from 0 to 215 N, and the displacement of the bowstring is given as 0.392 m. Substituting the values, we have: work = 215 N × 0.392 m = 84.28 J (joules). Therefore, the archer does 84.28 joules of work on the string in drawing the bow.
Learn more about Equivalent Spring constant:
https://brainly.com/question/30039564
#SPJ11
Two positively charged particles, labeled 1 and 2, with the masses and charges shown in the figure, are placed some distance apart in empty space and are then released from rest. Each particle feels only the electrostatic force due to the other particle (ignore any other forces like gravity). How do the magnitudes of the initial forces on the two particles compare, and how do the magnitudes of the initial accelerations compare? a4 and ay are the magnitudes of the accelerations of particle 1 and 2, respectively. F1 is the magnitude of the force on 1 due to 2; F2 is the magnitude of the force on 2 due to 1.
The magnitudes of the initial forces on the two particles are equal in magnitude but opposite in direction. However, the magnitudes of the initial accelerations of the particles depend on their masses and charges.
According to Coulomb's law, the magnitude of the electrostatic force between two charged particles is given by the equation:
F = k * (|q1 * q2|) / r^2
where F is the magnitude of the force, k is the electrostatic constant, q1 and q2 are the charges of the particles, and r is the distance between them.
Since the charges of the particles are both positive, the forces on the particles will be attractive. The magnitudes of the forces, F1 and F2, will be equal, but their directions will be opposite. This is because the forces between the particles always act along the line joining their centers.
Now, when it comes to the magnitudes of the initial accelerations, they depend on the masses of the particles. The equation for the magnitude of acceleration is:
a = F / m
where a is the magnitude of the acceleration, F is the magnitude of the force, and m is the mass of the particle.
Since the masses of the particles are given in the figure, the magnitudes of their initial accelerations, a1 and a2, will depend on their respective masses. If particle 1 has a larger mass than particle 2, its acceleration will be smaller compared to particle 2.
In summary, the magnitudes of the initial forces on the particles are equal but opposite in direction. The magnitudes of the initial accelerations depend on the masses of the particles, with the particle of greater mass experiencing a smaller acceleration.
Learn more about Coulomb's law.
brainly.com/question/506926
#SPJ11