Answer:
In ideal case, when no resistive forces are present then both the balls will reach the ground simultaneously. This is because acceleration due to gravity is independent of mass of the falling object. i.e. g = GM/R² where G = 6.67×10²³ Nm²/kg², M = mass of earth and R is radius of earth.
Let us assume that both are metallic balls. In such case, we have to take into account the magnetic field of earth (which will give rise to eddy currents, and these eddy currents will be more, if surface area will be more) and viscous drag of air ( viscous drag is proportional to radius of falling ball), then bigger ball will take slightly more time than the smaller ball.
Explanation:
In ideal case, when no resistive forces are present then both the balls will reach the ground simultaneously. This is because acceleration due to gravity is independent of mass of the falling object. i.e. g = GM/R² where G = 6.67×10²³ Nm²/kg², M = mass of earth and R is radius of earth.
Let us assume that both are metallic balls. In such case, we have to take into account the magnetic field of earth (which will give rise to eddy currents, and these eddy currents will be more, if surface area will be more) and viscous drag of air ( viscous drag is proportional to radius of falling ball), then bigger ball will take slightly more time than the smaller ball.
An ideal gas expands isothermally performing 4.30 x 10³ of work in the process. Calculate (a)
the change in internal energy of the gas, and (b) the heat absorbed during this expansion.
Answer:
The solution of the given query is explained below in the explanation portion.
Explanation:
Given value is:
Work,
⇒ [tex]W=4.30\times 10^3 \ J[/tex]
(a)
The change in the internal energy will be:
⇒ [tex]\Delta V=\frac{3}{2}nR(\Delta T)[/tex]
Throughout the isothermal procedure, The temperature will be constant "ΔT = 0".
then,
⇒ [tex]\Delta V = \frac{3}{2}nR(0)[/tex]
⇒ [tex]\Delta V = 0 \ J[/tex]
(b)
As we know,
⇒ [tex]\Delta V = Q-W[/tex]
On substituting the value, we get
⇒ [tex]0=Q-W[/tex]
On adding W both sides, we get
⇒ [tex]W=Q-W+W[/tex]
⇒ [tex]W=Q[/tex]
On substituting the given value of "W", we get
⇒ [tex]Q=4.30\times 10^3 \ J[/tex]
Why are fats and waxes solid at room temperature?
Answer:
Fats and waxes are solid at room temperature because they are made of saturated fatty acids. In contrast, oils are mostly unsaturated fatty acids. ... In contrast, unsaturated fatty acids have several kinks in their structure and therefore, are liquid at room temperature.
Put the following objects in order by their
weights with the heaviest first.
A) a glass bottle filled with air at atmo-
spheric pressure:
B) a glass bottle filled with helium at at-
mospheric pressure;
C) an empty glass bottle (vacuum inside).
?? Physics
Answer:
I Think its ABC
Explanation:
No air is the lightest
Helium is lighter than regular air that's why it goes up so then the regular air would be heaviest.
Which best describes what the observations have in common? They involve nuclear energy. They involve radiant energy. They involve changes in waves. They involve changes in energy.
Answer:
The answer is "They involve changes in energy".
Explanation:
Energy change is quite important in chemicals because nearly all reactions involve activation energy. They will learn and learn how to utilize different types of energy shifts in the steam cycle. A conversation about what drives chemical processes contributes to entropy and natural energy principles. It may shift from the shape of form. For example, chemicals might change to heat. Laser light can turn substances into power. Its energy can be changed into different kinds, but not wasted or produced.
Answer:
D
Explanation:
change in energy please give brainliest (edge 2021)
Choose the correct answer?
Answer:
B
Explanation:
4. Un móvil viaja en línea recta con una velocidad media de 1200 cm/s durante 9 s, y luego con velocidad media de 480 cm/s durante 7 s, siendo ambas velocidades del mismo sentido: a) ¿cuál es el desplazamiento total en el viaje de 16 s? B) ¿cuál es la velocidad media del viaje completo?
Answer:
A) El desplazamiento total del viaje es 14160 centímetros.
B) La velocidad media del viaje completo es 885 centímetros por segundo.
Explanation:
A) El desplazamiento es el producto de la velocidad media por el tiempo. El desplazamiento total es la suma de desplazamientos asociados a cada velocidad media, entonces:
[tex]x = \left(1200\,\frac{cm}{s}\right)\cdot (9\,s)+ \left(480\,\frac{cm}{s} \right)\cdot (7\,s)[/tex]
[tex]x = 14160\,cm[/tex]
El desplazamiento total del viaje es 14160 centímetros.
B) La velocidad media del viaje es el desplazamiento total dividido por el tiempo total, es decir:
[tex]\bar v = \frac{14160\,cm }{16\,s}[/tex]
[tex]\bar v = 885\,\frac{cm}{s}[/tex]
La velocidad media del viaje completo es 885 centímetros por segundo.
How will a ray of light traveling parallel to the principle axis of a concave mirror be reflected back
Answer:
It will be reflected to the principal focus of the concave mirror
Explanation:
This is because all rays parallel and close to the principal axis of a concave mirror get reflected to the principal focus of the mirror.
For a ray to be parallel to the mirror, it must be coming from an infinite distance.
So, using the mirror formula,
1/u + 1/v = 1/f where u = object distance from mirror, v =image distance form mirror and f =focal length of mirror.
Since u = infinite distance = ∞
1/u + 1/v = 1/f
1/∞ + 1/v = 1/f
0 + 1/v = 1/f
1/v = 1/f
v = f
So, the image is at the principal focus.
So, the ray of light parallel to the principal axis of the concave mirror is reflected to the principal focus of the concave mirror.
What will be the mass of a body at the center of the earth as compared to other places on
the earth?
Answer:
The mass of the object does not change by moving it to another place. ... At the center of the earth the net gravitational force is zero, so the weight will be zero, but its masses will remain same. Hence the mass at the centre of earth will be equl to 50 kg.
Explanation:
It's because the mass of the object doesn't change by moving it to next place.
What do scientists use satellites for?
(there is no science colum)
Answer:
NASA satellites help scientists study Earth and space. Satellites looking toward Earth provide information about clouds, oceans, land and ice. They also measure gases in the atmosphere, such as ozone and carbon dioxide, and the amount of energy that Earth absorbs and emits. And satellites monitor wildfires, volcanoes and their smoke.
Explanation:
Hope this helps! :) have a great day.
1. GPS
2. Internet
3. Weather forecast
4. Observation
5. Experiments
6. Discovery
The magnetic field of a bar magnet Select an answer and submit. For keyboard navigation, use the up/down arrow keys to select an answer. a Always points from north to south, whether we look outside the magnet or inside the magnet. b Always points from south to north, whether we look outside the magnet or inside the magnet. c Points from north to south outside the magnet, but south to north inside the magnet. d Points from south to north outside the magnet, but north to south inside the magnet.
Answer:
A: Always points from north to south, whether we look outside the magnet or inside the magnet
Explanation:
When we freely suspend a bar magnet, it's magnetic field will always rest in the north to south direction due to the fact that the Earth's magnetic south pole usually lies in the direction of the geographic north while the Earth's magnetic north pole usually lies in the direction of the geographic south.
Now, we all know that in magnets, like poles will repel and unlike poles will attract. What this now means is that the magnet will always point from the north to the south direction.
Which scenario did not include a chemical change?
Answer:
what scenario i dont understand
Explanation:
step by step explenation
list and describe the units of power
Answer:
On the other hand, power is a scalar quantity and is basically the amount of energy consumed per unit time which has no direction.
Horsepower HP 746 watts
Kilowatts kW 1×103W
Megawatts MW 1×106W
Gigawatts GW 1×109W
The S.I unit of power is Watt(W) which is joule per second.
What two types of tactical communication vary based on whether or not you speak?
Answer:
If you don't have autism/deaf/anything like that you should be able to speak
Explanation:
Answer:
Verbal and nonverbal
Explanation:
Took the test
What are the lower and upper fixed points of a laboratory thermometer in Celsius degrees?
The lower fixed point, or ice point, is the temperature of pure melting ice at normal atmospheric pressure. The upper fixed point, or steam point, is the temperature of pure boiling water at normal atmospheric pressure.
Derive formula of time period of S.H.M.
Answer:
it os shm and yea because of the smh
Explanation:
smh
14. A light bulb has a resistance of 8 ohms and a maximum current of 10 A How much voltage can
be applied before the bulb will break?
Answer:
80 volts.
Explanation:
From the question,
Applying Ohm's law
V = IR...................... Equation 1
Where V = Voltage, I = maximum current of the bulb, R = Resistance of the bulb.
Given: I = 10 A, R = ohms
Substitute these values into equation 1
V = 10×8
V = 80 volt.
Hence the voltage that can be applied is 80 volt.
An archer shoots an arrow 75 m distant target; the bull's-eye of the target is at the same height as the release height of the arrow. If d = 75 m and v = 37 m/s. At what angle must the arrow be released to hit the bull's-eye if its initial speed is 37 m/s?
Answer:
[tex]16.25^{\circ}[/tex]
Explanation:
R = Horizontal range of projectile = 75 m
v = Velocity of projectile = 37 m/s
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Horizontal range is given by
[tex]R=\dfrac{v^2\sin2\theta}{g}\\\Rightarrow \theta=\dfrac{\sin^{-1}\dfrac{Rg}{v^2}}{2}\\\Rightarrow \theta=\dfrac{\sin^{-1}\dfrac{75\times 9.81}{37^2}}{2}\\\Rightarrow \theta=16.25^{\circ}[/tex]
The angle at which the arrow is to be released is [tex]16.25^{\circ}[/tex].
A double slit produces a diffraction pattern that is a combination of single and double slit interference. Find the ratio of the width of the slits to the separation between them, if the first minimum of the single slit pattern falls on the fifth maximum of the double slit pattern. (This will greatly reduce the intensity of the fifth maximum.)
Answer:
The ratio of the width of the slits to the separation between them is 1:5
Explanation:
For this set of question
n = 1, m = 5
As we know for nth minimum
[tex]D sin\theta =n \lambda[/tex]
For mth Maximum
[tex]d sin\theta =m \lambda[/tex]
From the above two equations we get
[tex]Sin\theta = \frac{1*\lambda}{D} \\d * \frac{1*\lambda}{D} = 5 *\lambda\\\frac{D}{d} = \frac{1}{5}[/tex]
The ratio of the width of the slits to the separation between them is 1:5
john and kate live in the regions marked on the map. john experiences severe winters, with snowstorms and blizzards. in contrast, kate hardly ever experiences temperatures near or below freezing. which of the following statements explain the climate differences in these locations??
Answer:
A. Kate’s location is at a lower latitude.
C. Kate’s location absorbs sunlight that travels a shorter distance through the atmosphere.
Explanation:
^
Answer:
edmentum :-))
Explanation:
A 100 N force is applied to move an object a horizontal distance of 5 meters at constant speed in 10 seconds. How much power is done?
Answer:
50 W
Explanation:
Given :Force applied = 100 NDistance covered = 5 metresTime = 10 secondsTo find :
Power
Solution :For calculating power, we first need to know about the work done.
[tex] \bf \boxed{Work = Force \times displacement} [/tex]
Now, substituting values in the above formula;
Work = 100 × 5
= 500 Nm or 500 J
We know that,
[tex]\bf \boxed{Power=\dfrac{Work\:done}{Time\: taken}}[/tex]
Substituting values in above formula;
Power = 500/ 10
= 50 Nm/s or 50 W
Hence, power = 50 W .
Select all of the mixtures:
oxygen
gold
trail mix
soup
air
Answer:
trail mix, soup, and gold
hope this helps
have a good day :)
Explanation:
Answer:
1: gold 2: trail mix because its a combo of MnM's nuts rasins and whatever else might be in it lastly soup there can be anything in soup
Explanation:
may i be marked brainliest
A 10cm3 sample of copper has a density of 897g/cm3. What is the mass of the sample?
A 10cm³ sample of copper has a density of 897g/cm³. What is the mass of the sample ?
Answer:-Given:-Density of sample of copper is 897g/cm³.
Volume of sample of copper is 10cm³.
To Find:-The mass of the sample.
Solution:-We know,
[tex] { \boxed{\bf{\rm \red {Mass \: = \: Density \: × \: Volume}}}} [/tex]
So, Mass = 897g/cm³ × 10cm³
Mass = 8970 g
The mass of the sample is 8970 g. [Answer]How you work out efficiency?
Answer:
The work efficiency formula is efficiency = output / input, and you can multiply the result by 100 to get work efficiency as a percentage. This is used across different methods of measuring energy and work, whether it's energy production or machine efficiency.
Explanation:
Hope this helped!!!
Electrons move from negative to positive while the voltage flows ________ to _______ .
Answer:
positive to negative.
HELP ME PLEASEEEEEEEEEEEEEEE
Use the kinetic energy equation to explain why speed has a greater impact on kinetic energy than mass.
Answer:
KE = 1/2 M V^2 Equation to express kinetic energy
Since the result depends linearly on M and to the second power on V,
V has greater effect on the result.
Power is the rate at which...........is done or the rate at which........... is converted from one form to another .
Answer:
the answer is c I thought
A 30 kg box is pushed along a horizontal surface. The person pushing the box pushes with a constant force of 300 N directed at an angle of 30° below the horizontal. If the box starts from rest and reaches a speed of 5 m/s after only 2 seconds of pushing, find the force of friction acting on the box.
Answer:
aye son yall think if i keep answering these questions incorrectly.. they'll find out what im doing and take my li points back?
Explanation:
Clay bricks are used as building materials in construction. Do some research on specific heat capacities of brick, concrete, stone etc. and advise on what this means for society.
Answer:
It means it is the main building block material for society.
Specific heat is the amount of heat energy that causes a unit increase in temperature by required to be added to the unit mass of the substance. It can be measured by the heat capacity of a particular substance. The unit of specific heat is joule/kg/kelvin.
Material Specific heat capacity Thermal conductivity
Clay 1000 0.60
stone 1000 1.8
brick 800 0.73
concrete 1000 1.13
Advice on what this means for society:
Thermal interaction in between indoor and outdoor environments regulated by wall components.The structural and thermal properties influence the behavior of building and fabricating the bricks, stone and others. Clay Bricks are durable, and natural of stable value. A modern building must comply with numerous ecological and economic demands.Learn more about specific heats:
https://brainly.com/question/21041726
Scienctists agree that the world's climate is getting hotter. What do you think might happen as a result of this climate change?
Answer:
Bad things
Explanation:
Global warming has many terrible effects on people and the earth itself
such as, death, birth defects, asthmea, breathing conditions, increased diseases.
Amy pulls a spring with a spring constant k = 100 stretching it from its rest length of 0.10 m to 0.2
Answer:
Elastic potential energy E = 0.5 J
Explanation:
Let us assume we have to find the elastic potential energy stored in the spring.
Given: k = 100
change in the length of the spring x = 0.2-0.1 = 0.1 m
Elastic potential energy
E = [tex]\frac{1}{2} kx^2[/tex]
plugging the values we get
[tex]E = 0.5\times100\times0.1^2\\=0.5 J[/tex]
Hence, Elastic potential energy E = 0.5 J
Amy pulls a spring with a spring constant k = 100 N/m, stretching it from its rest length of 0.10 m to 0.20 m.
What is the elastic potential energy stored in the spring?
Answer: 0.5 J