Answer:
Algae-colored snow is a more common phenomenon. Single cellular algae can turn the usually white precipitation into an array of colors such as red, yellow, blue, and green. ... They contain chlorophyll, a green pigment that helps plants get energy from light, but also results in green-tinted ice-crystals.
I need help with this question
Option 3) a Soccer Ball
will travel the farthest distance.
Answer:
a bowling ball
pls follow me and Mark as brainliest and follow me to get free thanks to all your answers
Please answer this question correctly
Answer:
0.1m/s²
Explanation:
acceleration =(final velocity - initial velocity)÷time taken
acc=(2-0)÷20
av. acc=0.1m/s²
Besides gravity, what factor keeps the moon and Earth in orbit?
force
inertia
mass
distance
Answer:
interna
Explanation:
please mark as brainllest
A toaster has a resistance of 30 ohms. It draws 2A of current from the outlet. What is the potential difference ?
A. 60v
B. 2v
C. 15v
D.30v
Answer:
60V
Explanation: . V = IR = 1
30*2=60
Which of the following examples, would best represent the input energy and then
'wasted energy forms when watching TV.
A. Chemical, and then heat and electrical.
B. Chemical, and then heat, kinetic, sound
C. Electrical, and light, sound, heat
D. Electrical, and then sound and heat
Answer:
I think the answer is c electrical, and light , sound hewt
1. Since sleep is so important, we might wonder why people so often fail to get a sufficient amount
of sleep. What factors do you think are most important in preventing people from getting enough
sleep?
2. What factors prevent you from getting enough sleep in your own life?
3. How could factors that prevent people from getting enough sleep be addressed? If you were
designing an intervention to promote healthy sleep, what would you try to do?
4. Some careers involve regular sleep deprivation (e.g., flight attendants and jet lag: doctors and
night shifts). How does learning about sleep deprivation change your opinion about these
careers? Should they be regulated in some way, and if so, how?
Answer: 9/10
Explanation:
because it's really important and makes you energetic
Suppose that 6 J of work is needed to stretch a spring from its natural length of 28 cm to a length of 43 cm. (a) How much work is needed to stretch the spring from 33 cm to 38 cm
Answer:
Workdone = 0.67 Joules
Explanation:
Given the following data;
Workdone = 6J
Extension = 43 - 28 = 15cm to meters = 15/100 = 0.15m
The workdone to stretch a string is given by the formula;
Workdone = ½ke²
Where;
k is the constant of elasticity.
e is the extension of the string.
We would solve for string constant, k;
6 = ½*k*0.15²
6 = ½*k*0.0225
Cross-multiplying, we have;
12 = 0.0225k
k = 12/0.0225
k = 533.33N/m
a. To find the workdone when e = 33, 38.
Extension = 38 - 33 = 5 to meters = 5/100 = 0.05m
Workdone = ½*533.33*0.05²
Workdone = 266.67 * 0.0025
Workdone = 0.67 Joules
Therefore, the amount of work (in J) needed to stretch the spring from 33 cm to 38 cm is 0.67.
The tiny sparks are at a very high t__________
Explanation:
temperature o temperatura
1. Who helped Mendeleev ride 1200 miles to a university in Moscow only to be rejected?
Answer: that guy
Explanation:
The __________________ is the entire range of Electromagnetic Waves.
Absorption
Opaque
Electromagnetic Spectrum
Refraction
✧･ﾟ: *✧･ﾟ:* *:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:* *:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:* *:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:* *:･ﾟ✧*:･ﾟ✧
Answer:
I think its the electromagnetic spectrum
Sometimes referred to as the law of inertia. An object at rest stays at rest and an object in motionstays in motion with the same speed and in the same direction unless acted upon by an unbalanced force.
A Unbalanced force
B Newton's Second Law of Motion
С Newton's Third Law of Motion
D Newton's First Law of Motion
Answer:
D
Explanation:
Newtons first law states that if an object is at rest it will stay at rest only if an unbalanced force acts on it. As well as if an object is in motion it will stay in motion unless an unbalanced force acts on it.
Ps- The object will stay moving in the same speed and direction.
Answer:
D
Explanation:
I just know
Why won’t anyone help me please anybody help me I really need help .
Answer:
1➡️ this is the method of decomposition
2➡️ H2 and O2
3➡️ b
sorry if I am wrong
Please answer this question correctly
20 push ups
hope thats correct^^
as a person pushes a box across a floor, the energey from the person's moving arm is transfered to the box, and the box and the floor become warm during this processes what happens to energey?
a it is increased
b it is conversed
c it is decreased
d it is created
Visible light waves do not diffract as well as radio waves because _____
a. the energy of visible light is too high
b. the frequency of the light waves are too low
c. the wavelength of the light waves are too small
d. the speed of light waves is too slow
Visible light waves do not diffract as well as radio waves because the wavelength of the light waves are too small.
What is Wavelength?This is defined as the distance between corresponding points of two consecutive waves.
Light waves have a small wavelength which is why it doesn't diffract as well as radio waves thereby making option C the most appropriate choice.
Read more about Wavelength here https://brainly.com/question/10728818
On a sunny summer day, with the sun overhead, you can stand under a tree and look on the ground at the pattern of light that has passed through gaps between the leaves. You may see illuminated circles of varying brightness. Why are there circles, when the gaps between the leaves have irregular shapes
Answer:
he pattern is circular because the leaves have rounded spaces that when added at a great distance give a circular shape in far-field diffraction or Fraunhofer
Explanation:
When the sunlight reaches the trees it suffers a diffraction phenomenon if the leaves are close together,
This diffraction spectrum when we see it near the leaves has the shape of the edge of each leaf this diffraction is of the near field type, when we move away from the leaves the different patterns add up, resulting in a far field diffraction, this diffraction it has a characteristic shape, regardless of the details of the initial shapes.
In general, if the initial shapes are slits, the pattern is of the lines type, but if the pattern has circular or rounded characteristics, the resulting pattern is circles of different sizes depending on the space between the initial openings.
Consequently the pattern is circular because the leaves have rounded spaces that when added at a great distance give a circular shape in far-field diffraction or Fraunhofer
A rocket has a mass of 156,789 kg and is traveling at 45.6 m/s. How much kinetic energy does the rocket
possess?
Explanation:
K.E =1/2 mv^2
=1/2(156789)(45.6)^2
=78,394.5 × 2,079.36
=163,010,387.52 kg m/s
This should be your answer.
is anyone good at physics like Newton's Laws if so can you say yes and come to this post at 12:03 I will give you 50 points.
Answer:
Yep
Explanation:
A 12 volt battery will increase the potential energy of 4 coulombs of charge by _____ Joules.
Question 8 options:
16 J
3 J
.33J
48 J
Answer:
Explanation:
Given parameters:
Voltage = 12V
Quantity of charge = 4C
Unknown:
Potential energy = ?
Solution:
Within this circuit, the value of the potential energy can be found using the expression below:
Potential energy = [tex]\frac{1}{2}[/tex] c v²
c is the quantity of charge
v is the voltage
Potential energy = [tex]\frac{1}{2}[/tex] x 4 x 12² = 288J
If an object does not move, then you could say
A. The object had too much kinetic energy.
B. Only power was applied to the object.
C. No work was done on the object.
D. There were no forms of energy to be transformed.
Answer:
C
Explanation:
Because an object that is in motion stays in motion unless acted on by an intrivatal force
HELP URGENT WILL GIVW BRAINLIEST
Answer: IT IS C TRUST ME DID IT
Explanation: OK BYE GOOD LUCK
The floor on a dance hall can take a pressure of 3.5MPa before getting damaged. A lady of mass 60kg wears high heeled shoes. What is the smallest area of the sole of a heel she could wear such that it won't permanently damage the floor
Answer:
smallest area of the heel is 0.000168 m^2
Explanation:
Recall that pressure is defined as: Force / area. Therefore to reach a pressure of 3,500,000 Pa using a force: m * g = 60 kg * 9,8 m/s^2 = 588 N, one needs:
Area = 588 / 3500000 m^2 = 0.000168 m^2
Orchestra instruments are commonly tuned to match an A-note played by the principal oboe. The Baltimore Symphony Orchestra tunes to an A-note at 440 Hz while the Boston Symphony Orchestra tunes to 442 Hz. If the speed of sound is constant at 343 m/s, find the magnitude of difference between the wavelengths of these two different A-notes. (Enter your answer in m.)
Answer:
Δλ = 3*10⁻³ m.
Explanation:
At any wave, there exists a fixed relationship between the speed of the wave, the wavelength, and the frequency, as follows:[tex]v = \lambda* f (1)[/tex]
where v is the speed, λ is the wavelength and f is the frequency.
Rearranging terms, we can get λ from the other two parameters, as follows:[tex]\lambda = \frac{v}{f} (2)[/tex]
Since v is constant for sound at 343 m/s, we can find the different wavelengths at different frequencies, as follows:[tex]\lambda_{1} =\frac{v}{f_{1}} = \frac{343m/s}{440(1/s)} = 0.779 m (3)[/tex]
[tex]\lambda_{2} =\frac{v}{f_{2}} = \frac{343m/s}{442(1/s)} = 0.776 m (4)[/tex]
The difference between both wavelengths, is just the difference between (3) and (4):[tex]\Delta \lambda = \lambda_{1} - \lambda_{2} = 0.779 m - 0.776m = 3e-3 m (5)[/tex]
⇒ Δλ = 3*10⁻³ m.
Using a dish-shaped mirror, a solar cooker concentrates the sun's energy onto a pot for cooking. A cooker with a 1.2-m-diameter dish focuses the sun's energy onto a pot with a diameter of 25 cm What is the intensity at the base of the pot
Answer:
26500 W/m²
Explanation:
Given that:
The diameter of the dish d = 1.2 m
Assuming the Solar power P capture by the dish = 1300 W
The surface area of the pot is calculated by using the formula:
[tex]= \pi r^2[/tex]
[tex]\pi \dfrac{d^2}{4}[/tex]
where; the diameter = 25 cm
Area = [tex]\pi \dfrac{d^2}{4}[/tex]
Area = [tex]\pi \dfrac{0.25^2}{4}[/tex]
Area = 0.049 m²
The intensity is calculated by using the formula
I = power/area
I = 1300/0.049
I = 26530.6 W/m²
I ≅ 26500 W/m²
1. How long will it take a car to accelerate from 15.2 m/s to 23.5 m/s if the car
has an average acceleration of 3.2 m/s2 ?
Solving for:
Formula:
Substitute known values:
Number answer:
Unit answer
Answer:
I have no clue I'm really really really really really but like really sorry this is so hard
1) The cause of magnetism is
A. atoms forming “domains” that are arranged randomly
B. atoms forming "domains” that are arranged uniformly
C. atoms forming "dolomites” that are arranged randomly
D. atoms forming “dolomites” that are arranged uniformly
Answer:
I think it's A, I'm not sure though
Water boils to power a steam engine. Which statement best describes the changes in the water as it boils?
Option B
kskmsnsnsmjsjsn
Answer:
C. The potential energy of the particles increases as the intermolecular forces are overcome
Explanation:
Suppose that the air resistance a car encounters is independent of its speed. When the car travels at 15 m/s, its engine delivers 20 hp to its wheels. What is the power delivered to the wheels when the car travels at 30 m/s
Answer:
22.5 hp
Explanation:
The power delivered to an object is given by :
[tex]P=F\times v[/tex]
Where
F is force and v is velocity of the car.
For the same force, power is directly proportional to the velocity.
So,
[tex]\dfrac{P_1}{P_2}=\dfrac{v_1}{v_2}\\\\P_2=\dfrac{P_1v_2}{v_1}\\\\P_2=\dfrac{15\times 30}{20}\\\\P_2=22.5\ hp[/tex]
So, the new power is 22.5 hp.
A vertical beam of power intensity P (in Watts/m2 ) passes downward through a particular substance. The rate at which P decreases with respect to the thickness t (in meters) through which the beam has passed is proportional to P(t). The power intensity P at the top of the substance is 3,000 W/m2 . The power intensity P at a depth of 2.00 meters below the surface is 600 W/m2 . What is the power intensity P at a depth of 1.25 meters below the surface
Answer:
x = 1162.5 W/m²
Explanation:
Since, the power decrease is proportional to the depth of the beam. Therefore, interpolation can be used to find the intensity of power at a depth of 1.25 m. First we calculate the slope from know points:
[tex]Slope = \frac{\Delta y}{\Delta x} \\\\Slope = \frac{(1500 - 3000)\ W/m^{2}}{(2 - 0)\ m} \\\\Slope = -750\ W/m[/tex]
Now, we can find the unknown value by using this slope:
[tex]Slope = -750\ W/m = \frac{(600 - x)\ W/m^{2}}{(2 - 1.25)\ m}\\\\(-750\ W/m)(0.75\ m) = (600 - x)\ W/m^{2}\\x = 600\ W/m^{2} + 562.5\ W/m^{2}\\[/tex]
x = 1162.5 W/m² (Power intensity at depth of 1.25 m)
What is the difference between vector and velocity?
Answer:
Is the vector is(mathematics) a directed quantity, one with both magnitude and direction, the (soplink) between two points while velocity is (physics) a vector quant that denotes the rate of change of position with respect to time or a speed with the directional component.