Answer:
The catapult works when the potential energy stored in a stretched rubber band is converted to kinetic energy when it snaps back to its loose shape, moving the catapult arm—and the projectile! ... The kinetic energy of the catapult will give the projectile a force moving up and away from the catapult.
Explanation:
Who wants to do my missing physics work
Answer:
WHAT IF I HATE PHYSICS ?What is the electrical force between 91 and 92? Recall
that k = 8.99 * 109 Nom?
2 m
9, +6 C
9,=-40
+1 m +
O 4.3 x 1010 N
q = +3 C O 3,5 x 1010 N
O -5.4 x 1010 N
O -5.8 x 10101
Answer:
F = 5.39 x 10¹⁰ N
Explanation:
The electrical force between q₁ and q₂ can be calculated by Coulomb's Law:
[tex]F = \frac{kq_1q_2}{r^2}\\\\[/tex]
where,
F = electrical force = ?
k = Coulomb Constant = 8.99 x 10⁹ Nm²/C²
q₁ = first charge = +6 C = 6 C
q₂ = -4 C = 4 C
r = distance between charges = 2 m
Therefore,
[tex]F = \frac{(8.99\ x\ 10^9\ N.m^2/C^2)(6\ C)(4\ C)}{(2\ m)^2}\\\\[/tex]
F = 5.39 x 10¹⁰ N
Answer:
C on edge
Edge2021
What variables must be known to determine the observed frequency of a wave?
Answer:
The frequency, 'f', of a wave is given by the speed, 'v' of the wave and the wavelength, λ, of the wave
f = v/λ
The frequency, 'f', of a wave is also given by the inverse of the period, 'T', of the wave which is the time it takes the wave to complete an oscillation or a cycle
f 1/T
Therefore, the variables to be known to determine the frequency of a wave includes either, the velocity and the wavelength of the wave or the period of oscillation (the wave cycle) of the wave
Explanation:
What do you call the material or "stuff" that a wave travels through
A medium
B wave
C decibel
D doppler
what is reflection of light question mark write the laws of reflection of light
Answer:
Reflection of light means the bouncing back of light in another direction after hitting a smooth polished surface
laws of reflection1) Angie of incidence is equal to the angle of reflection
2) The nornal ray, reflected ray and the incident ray all lie in the same plane
Scott is making a chart to show the difference between chemical reactions and nuclear reactions. Which part of his chart is incorrect? Chemical Reaction Nuclear Reaction Line 1 Happens in the nucleus of atoms Happens between atoms Line 2 Forms new compounds Forms new atoms and radioactive particles Line 3 Involves small amounts of energy Involves large amounts of energy
Answer:
The incorrect part of the chart is;
Line 1
Chemical [tex]{}[/tex] Reaction [tex]{}[/tex] Nuclear Reaction
Line 1 Happens in the nucleus of atoms [tex]{}[/tex] Happens between atoms
Explanation:
The given chart can be presented as follows;
Chemical Reaction [tex]{}[/tex] Nuclear Reaction
1. Happens in the nucleus of atoms [tex]{}[/tex] Happens Between atoms
2. Forms new compounds [tex]{}[/tex] Forms new atoms
3. Involves small amounts of energy [tex]{}[/tex] Involves large amounts of energy
From the above chart, line 1 is incorrect because a chemical reaction happens between the valence electrons of the reacting atoms while a nuclear reaction is the reaction that takes place between the nucleus of two or more atoms or the nucleus of an atom and a subatomic particle to produce one or more than new nuclide of a new atom with a change in the mass of the nucleus being represented by the large amount of energy in the reaction. Therefore, a nuclear reaction takes place in the nucleus of an atom, forms new atoms and involves large amounts of energy
The correct arrangement is presented as follows;
Chemical Reaction [tex]{}[/tex] Nuclear Reaction
1. Happens Between atoms [tex]{}[/tex] Happens in the nucleus of atoms
1. Explain how applied heat works between and at critical temperatures.
2. Explain how a refrigerator works to cool down warm objects that would otherwise be i
temperature.
3. Fill in the chart below to identify the name of the process that explains the state of cha
indicated, the states of matter being changed, or the points at which the process occu
Answer:
More heat is required for the change of state.
Explanation:
Applied heat works at critical temperatures because at this point more heat is needed by the substance in order to change the state of substance. At critical temperatures, the substance can't melt if no more heat energy is given to the substance. A refrigerator works to cool down warm objects by absorbing heat from the inside portion of the fridge and provides cool air which cools the inner side of the fridge. The point at which a solid changes into a liquid state is called melting point while on the other hand, the point at which a liquid changes into a gaseous state is known as boiling point of a substance.
how far will an automobile move if 168000 j of work is created by 2000 n of force
Answer:
Distance = 84 meters
Explanation:
Given the following data;
Work done = 168,000 Joules
Force = 2,000 Newton
To find the distance covered by the automobile, we would use the formula;
[tex] Workdone = force * distance [/tex]
Substituting into the formula, we have;
[tex] 168000 = 2000 * distance [/tex]
[tex] Distance = \frac {168000}{2000} [/tex]
Distance = 84 meters
state the Newton's law of cooling
Explanation:
Newton's law of cooling (or heating) states that the temperature of a body changes at a rate proportional to the difference in temperature between the body and its surroundings. It is a reasonably accurate approximation in some circumstances. dTdt=−k(T−T0), where k is a positive constant.
Answer:
Q=h.A.(T(t)-Tenu)
Explanation:
explain newton's second law of motion
Answer: Newtons second law of motion: the acceleration of an object is directly related to the net force and inversely related to its mass. ... So, the force/mass ratio (from the equation acceleration = force/mass) is the same for each. Therefore, the acceleration is the same and they reach the ground at the same time.
Explanation:
Hope this helps you! Have a good day!
Answer:
Newton's second law states that the acceleration of an object is directly related to the net force and inversely related to its mass. ... So, the force/mass ratio (from the equation acceleration = force/mass) is the same for each. Therefore, the acceleration is the same and they reach the ground at the same time.
Example:Newton's Second Law of Motion says that acceleration (gaining speed) happens when a force acts on a mass (object). Riding your bicycle is a good example of this law of motion at work. Your bicycle is the mass. Your leg muscles pushing pushing on the pedals of your bicycle is the force.
Explanation:
~Hope this helps
11 points!!!
what happened when glucose reacts with air?
draw the graph of the cooling curve of Naphtalene; hence discuss the cooling curve of Nephtalene
Answer:
soory but i cant under stand it proper can explain
What happens to the magnetic force as an object gets further away from the magnetic field?
How can we create a new element by combining all the other elements
Answer:
In order to create a new element you have to change the number of protons in a nucleus.
A 110 kg fire-fighter descends down a pole. He experiences 530N of
friction.
d. Determine the fire-fighters weight
e. Draw an FBD
f. Determine the Fnet
a rectangular tank measures 12.5 metres long 10.0 wide and 2.0 metre high calculate the mass of the water in the tank when it is full the density of water 1000 kg per metre cube assume the measurement are internal
Answer:
250000kg
Explanation:
Mass =density * volume
Density=1000kg/m³
Volume=l*w*h
12.5*10.0*2.0=250m³
Mass=1000 *250
=250000kg
The diagram below shows a 1.0 x 105newton truck at rest on a hill that makes an angle of 8.0° with the
horizontal. What is the component of the truck's weight parallel to the hill? (hint: the weight was already
calculated, also you can use the work area to help you solve this.]
Answer:
[tex]it \: is \: mg \sin(8.0 \degree) \\ = 1.0 \times 10 {}^{5} \times \sin(8.0 \degree) \\ = 9.9 \times 10 {}^{4} newtons[/tex]
The component of the truck's weight parallel to the hill is 13,917.31 N.
The given parameters:
Weight of the truck, W = 1.0 x 10⁵ NInclination of the hill, θ = 8⁰The component of the truck's weight parallel to the hill is calculated as follows;
[tex]W_x = mg \times sin(\theta)\\\\W_x = W \times sin(\theta)\\\\W_x = 1\times 10^5 \times sin(8)\\\\W_x = 13,917.31 \ N[/tex]
Thus, the component of the truck's weight parallel to the hill is 13,917.31 N.
Learn more about parallel forces here: https://brainly.com/question/9719731
You are allowed to change the number of molecules of each substance by adding coefficients in front of the formulas.
True
False
Answer:
This is false.
Explanation:
No; you cannot change the formulas of individual substances because the chemical formula for a given substance is characteristic of that substance. What you can do, however, is to change the number of molecules that react or are produced.
As a projectile travels down its trajectory path, it covers _____.
A. more distance each second
B. a distance that depends on how it was dropped
C. the same amount of distance each second
D. less distance each second
Answer:
it is C.
definitely C
Explanation:
if I am right.
plz help me out and give brainliest
3) El motor de una moto le imprime una velocidad de 90 km/h al aplicar sobre ella una fuerza de 240 N. ¿Cuál es la potencia de la moto en vatios?
Answer:
P = 6000 W
Explanation:
The given question is "The motor of a motorcycle gives it a speed of 90 km / h when a force of 240 N is applied to it. What is the power of the motorcycle in watts?"
Given that,
Speed of a motorcycle, v = 90 km/h = 25 m/s
Force applied to the motorcycle, F = 240 N
We need to find the power of the motorcycle. We know that,
Power = Fv
So,
P = 240 N × 25 m/s
= 6000 W
So, the required power of the motorcycle is equal to 6000 W.
4
12. The term, bullet, is often incorrectly applied to the:
a. primer, which includes primer powder, gunpowder, the bullet, and the
casing material that holds them all together.
b. cartridge, which includes primer powder, gunpowder, the bullet, and the
casing material that holds them all together.
c. anvil, which includes primer powder, gunpowder, the bullet, and the casing
material that holds them all together.
d. headstamp, which includes primer powder, gunpowder, the bullet, and the
casing material that holds them all together.
Answer:
B. Cartridge, which includes primer powder, gunpowder, the bullet, and the
casing material that holds them all together.
Explanation:
It is right trust me.
A 4 kg mass is moving at 8 m/s collides with a 2 kg mass moving at 5 m/s.
After the collision, both objects stick together, what is the velocity of the
two cars? *
Answer:
V = 7 m/s
Explanation:
Given that,
Mass 1, m₁ = 4 kg
Speed of the object 1, v₁ = 8 m/s
Mass 2, m₂ = 2 kg
Speed of object 2, v₂ = 5 m/s
After the collision, both objects stick together. Let V be the common velocity. Using the conservation of linear momentum to find it.
[tex]m_1v_1+m_2v_2=(m_1+m_2)V\\\\V=\dfrac{m_1v_1+m_2v_2}{m_1+m_2}\\\\V=\dfrac{4(8)+2(5)}{4+2}\\\\V=7\ m/s[/tex]
So, the velocity of two cars is 7 m/s.
How do the gravitational potential energy and the kinetic energy of the ball change as the ball rolls down the ramp?
Explanation:
The gravitational potential energy is given by :
P = mgh
The kinetic energy of an object is given by :
[tex]K=\dfrac{1}{2}mv^2[/tex]
As the ball reaches the bottom of the ramp, its potential energy decreases and kinetic energy increases.
It imply that, when the ball at the top most height, its gravitational potential energy is maximum and zero kinetic energy and when ball reaches the bottom of the ramp, it will have maximum kinetic energy and zero potential energy.
A construction worker drops a hammer from a 15 m high building. How fast is it going before it hits the ground?
Answer:
12.1 m/s
Explanation:
v^2-u^2=2as
v^2-0=g(15)
Fishing boats use sonar to locate schools of fish. What characteristic of sound is most important for this application of sonar?
Sound waves reflect off some surfaces
Sound waves diffract around corners
Sound waves interfere when they overlap
Sound waves spread out from a source
Answer:
A sonar device sends pulses of sound waves down through the water. When these pulses hit objects like fish, vegetation or the bottom, they are reflected back to the surface. The sonar device measures how long it takes for the sound wave to travel down, hit an object and then bounce back up.
A body falling freely on the moon the acceleration due to gravity there is 1.7 m/s2.
a. its displacement at t = 3s
b. the time for it to reach a speed of 25 m/s
c. the time required for it to fall 300 m
d. its speed after falling 70 m
Answer:
a) 7.65 m
b) 14.71s
C) 15.43 m/s
Explanation:
a) s = ut + 0.5at²
s= ?
u = 0
t = 3s
a = 1.7 m/s²
s = 0 + 0.5 × 1.7 × 3²
s = 7.65 m
b) v = u + at
v = 25m/s
u = 0 m/s
a = 1.7 m/s ²
t = ?
v=at
t = v / a
t = 25 / 1.7
t = 14.71s
c) v² = u² + 2as
s = 70m
a = 1.7m/s²
u = 0 m/s
v = ?
v² = 2as
v = √238
v = 15.43 m/s
explain why at the atomic level, conductors move charge easily and insulators do not
What is the wavelength of a sound wave that has a speed of 340 m/s and a frequency of 880 Hz?
Answer:
Explanation:Wave length of a sound wave = speed / frequency1) 340 m/s / 880 Hz
Answer:
0.386m
Explanation:
Speed
Wavelength = -----------------
Frequency
340m/s
Wavelength = -------------- = 0.386m
880 Hz
what is the best thermal insulator? aluminum copper steel or glass
Answer:
Copper is a better heat conductor than glass. In general, we think of metals as good conductors. In fact, metals vary widely in their conductivity but, overall, they are better conductors of heat than most liquids and gasses. Other solids also vary in their capability to conduct heat.
Explanation:
The best thermal insulator is glass. The correct option is D.
What is thermal insulator?The prevention of heat transfer between surfaces that are in thermal contact or within a radiative influence zone is known as thermal insulation.
In addition to using the right item forms and materials, specially engineered technologies or processes can also be used to provide thermal insulation.
The term "thermal insulation" refers to the various ways we try to prevent heat from transferring from one object to another.
These two items could be the inside and outside of exterior walls in residential structures or the hot and cold faces of processing equipment in industrial settings.
Glass has a very small amount of unpaired electrons that are not in use, making it a good electrical insulator. Extremely strong electron interactions hold the atoms of glass together.
Thus, the correct option is D.
For more details regarding thermal insulator, visit:
https://brainly.com/question/23812426
#SPJ2
What force can be seen when North Pole is brought near to South Pole
Answer:
Explanation:
The answer is magnetic force
Answer:
Magnetic forces which causes attraction between the two poles