Answer:
The SMRs can adjust their energy output using coolants and control rods.
Power plants can be built to fit locations with less demand or less space.
Explanation:
I think that it is but I am not sure.
Power plants can be built to fit locations with less demand or less space. The SMRs can adjust their energy output using coolants and control rods. The correct options are B and D.
What are SMRs?A wireless communications technology that competes with traditional cellular services. The base station equipment supplier is the transmitter licensee in an SMR system.
Power plants can be built to accommodate locations with low demand or limited space. Coolants and control rods allow SMRs to adjust their energy output.
These advanced reactors, which are expected to range in size from tens to hundreds of megawatts, can be used for power generation, process heat, desalination, or other industrial applications.
Light water or other non-light water coolants, such as a gas, liquid metal, or molten salt, may be used as a coolant in SMR designs.
Thus, B and D are correct options.
For more details regarding modularity, visit:
https://brainly.com/question/11797076
#SPJ2
* The cost of table salt and table sugar is Rs 15 per kg.
and Rs 69 per kg respectively calculate their cost per mole?
Cost per mole
Table salt : Rs 0.878
Table sugar : Rs 23.63
Further explanationGiven
Cost table salt (NaCl) = 15/kg
Cost table sugar(sucrose-C12H22O11) = 69/kg
Required
cost per mole
Solution
mol of 1 kg Table salt(NaCl ,MW= 58.5 g/mol) :
[tex]\tt mol=\dfrac{1000~g}{58.5}=17.09~mol=Rs~15\rightarrow 1~mol=Rs~0.878[/tex]
mol of 1 kg Table sugar(C12H22O11 ,MW= 342 g/mol) :
[tex]\tt mol=\dfrac{1000}{342}=2.92~mol=Rs~69\rightarrow 1~mol=Rs~23.63[/tex]
Is radium usually considered as part of the alkaline earth category in terms of chemistry?
Explanation:
Radium (atomic number 88) has similar properties to barium and is also in the Group 2 category. However, radium is a radioactive element and is generally under the category of radioisotopes in addition to being an alkaline earth metal, because it is not a stable element.
If molten sodium chloride is split by electrolysis, which reaction occurs at the anode?
2Cl2 (g) →2Cl− (l) + 2e−
2Cl− (l) →Cl2 (g) + 2e−
2Na (l) →2Na+ (l) + 2e−
2Na+ (l) + 2e−→2Na (l)
Answer: [tex]2Cl^-(l)\rightarrow 2e^-+Cl_2(g)[/tex]
Explanation:
Electrolysis of a subastance is breaking it into its constituents by the action of electrical current.
In the electrolysis of molten sodium chloride, sodium metal is produced at the cathode which is a negative electrode and chlorine gas produces as the anode which is a positive electrode.
[tex]2NaCl(l)\rightarrow 2Na^++2Cl^-[/tex]
At anode : [tex]2Cl^-(l)\rightarrow 2e^-+Cl_2(g)[/tex]
At cathode : [tex]2Na^+(l)+2e^-\rightarrow 2Na(l)[/tex]
2Cl- (l) → Cl2 (g) + 2e-
Which of the following statements explains the difference between a lease and a loan?
a. At the end of a loan the car belongs to you, but at the end of a lease, the car still belongs to the
lease company
b. At the end of a loan, the car still belongs to the lease company, but at the end of a lease the car
belongs to you.
c. A loan requires a large down payment at the beginning while a lease does not.
d. A lease requires a large down payment at the beginning while a loan does not.
Please select the best answer from the choices provided
Answer:
letter A is the answer
Explanation:
At the end of a loan the car belongs to you, but at the end of a lease, the car still belongs to the lease company.
What happens when you put an ice-pop outside? This is for the people who don’t know
Answer:
It melts
Explanation:
Answer:
It melts?
Explanation:
Use the graph to determine the instantaneous speed at 2 seconds.
What is the average speed over the entire trip?
Answer:
The instantaneous speed at 2 seconds =
3 m/s
The average speed over the entire trip is
2 m/s
Explanation:
Answer above is wrong and doesn't state anything about the answer, so this is the correct answer hope this helped! :)
Answer:
1.) 3 m/s 2.) 2 m/s
Explanation:
I hope this helps!!
is the lorax story relevant today society?
Answer:
well i would say yes because how the factory made the air bad and how they all were fighting just about a tree
Explanation:
Answer: LOL XD no because of CO/VID
Explanation: BRAINLIEST PLS LOL
Calculate the number of protons and neutrons for ²⁴Mg and 88Sr.
Answer:
12 protons and 12 neutrons are present in Mg and
38 protons and 50 neutrons are present in Sr
Explanation:
Answer:
For ²⁴Mg
1. Proton number = 12
2. Neutron number = 12
For ⁸⁸Sr:
1. Proton number = 38
2. Neutron number = 50
Explanation:
For ²⁴Mg:
1. Determination of the number of proton.
The atomic number of an element is simply defined as the number protons in the atom of the element. The atomic number of ²⁴Mg is 12 since no two elements have the same atomic number.
Atomic number = 12
Proton number = Atomic number
Proton number = 12
2. Determination of the Neutron number.
Mass number = 24
Proton number = 12
Neutron number =?
Mass number = Proton + Neutron
24 = 12 + Neutron
Collect like terms
Neutron = 24 – 12
Neutron number = 12
For ⁸⁸Sr:
1. Determination of the number of proton.
The atomic number of ⁸⁸Sr is 38.
Atomic number = 38
Proton number = Atomic number
Proton number = 38
2. Determination of the Neutron number.
Mass number = 88
Proton number = 38
Neutron number =?
Mass number = Proton + Neutron
88 = 38 + Neutron
Collect like terms
Neutron = 88 – 38
Neutron number = 50
What very specific property of mineral calcite allows geologists to quickly identify it in a mixture of other colorless minerals
Radio waves carry information from
A. antenna to antenna.
B. amplitude to frequency.
C. AM to FM.
D. space to Earth.
science question
soap making ingredients list (not harmful chemicals)
20 oz. coconut oil
10 oz. olive oil
9 oz. distilled water
essential oils
colorants (optional)
dried herbs or flowers (optional)
soap base accordingly
what is the value of log1.004?
Answer:
−0.60205999
Explanation:
ASAP pleaseeeeeeeeeeeeeeeeeeeeeee and Thankyou
When an atom becomes a negative ion, it
It becomes a positives atom. Since it loses electrons it has more of a positive charge than a normal atom.
A student uses a magnet to move a 0.25kg metal ball. The magnet exerts a force of 5N on the ball. What is the acceleration of the ball when it begins to move ?
Answer:
20 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]a = \frac{f}{m} \\ [/tex]
f is the force
m is the mass
From the question we have
[tex]a = \frac{5}{0.25} \\ [/tex]
We have the final answer as
20 m/s²Hope this helps you
This table shows the pH values of different solutions. A 2-column table with 4 rows. The first column labeled solution has entries W, X, Y, Z. The second column labeled p H has entries 6, 5, 1, 3. Which ranks the solutions from the strongest to weakest acid? W X Y Z Y W X Z W X Z Y Y Z X W
Answer:
D- Y -Z -X -W
:)
The solution with lowest pH are more acidic and those with higher pH values are basic. The given solutions can be ranked from the strongest to weakest acid as Y Z X W.
What is pH?pH of a solution is the measure of its H+ ion concentration. Mathematically it is the negative logarithm of H+ ion concentration of the solution. The acidic solutions contains more H+ ions.
A pH value of 7 represents a neutral solution. The pH above 7 is basic solution and a solution with pH below 7 is acidic in nature. A pH scale can be used to measure the range.
The pH of 1 and 3 indicates strong acidic solutions and 5 and 6 are weakly acidic . The lowest value of pH indicates highest acidity. Therefore, the correct order is Y Z X W.
To find more on pH, refer here:
http://brainly.com/question/2288405
#SPJ2
How many atoms are present in 1.4 grams of aluminum?
Answer: 3.2x10^23
Explanation:
Start by finding the molar mass of aluminum.
Then turn grams into moles by dividing grams of substance by molar mass. 1.4g÷26.98g
Then multiply that by 6.022x10^23 atoms. 0.0519x6.022x10^23
You can use dimensional analysis to solve this type of problem.
GIVING BRAINLIEST!
Please define the following in your own words:
law of conservation of matter
Answer:
Matter says that the amount of matter stays the same, even when matter changes form. Sometimes it may seem that matter disappears during a science experiment, but this law tells us that matter cannot magically appear or disappear, it simply changes from one form to another.
Explanation:
brainliest?
Answer: Hope this helps:)
The Law of Conservation of Mass dates from Antoine Lavoisier's 1789 discovery that mass is neither created nor destroyed in chemical reactions. In other words, the mass of any one element at the beginning of a reaction will equal the mass of that element at the end of the reaction. The law of conservation of matter states that in any given system that is closed to the transfer of matter, the amount of matter in the system stays constant. The law of conservation of matter says that in chemical reactions, the total mass of the products must equal the total mass of the reactants. French chemist A. Lavoisier laid the foundation to the scientific investigation of matter by describing that substances react by following certain laws. These laws are called the laws of chemical combination. Matter says that the amount of matter stays the same, even when matter changes form. Sometimes it may seem that matter disappears during a science experiment, but this law tells us that matter cannot magically appear or disappear, it simply changes from one form to another. Matter can change form through physical and chemical changes, but through any of these changes, the matter is conserved. The same amount of matter exists before and after the change—none is created or destroyed. This concept is called the Law of Conservation of Mass.
_____is the chemical bond formed when two atoms share electrons.
Answer:
covalent bond
Explanation:
Answer:
The covalent bond is the chemical bond formed when two atoms share electrons.
How many moles of oxide are in 0.050 g of Iron(III) oxide?
Answer:
0.00031311017345051
wich type of matter is always made up of only one kind of atom
Answer:
what is this for?
Explanation:
Answer:
Elements
Explanation:
"Elements are substances, forms of matter and gasses that are made up of only one type of atom."
Panico. (2012, September). The Atomic Model and Matter. Retrieved December 15, 2020, from https://odysseyk12.org/hs/teachers/panico/pdf/atoms/atoms.html
(oh no)
What is the mass of silicon when there are 1.8 x 10^21 atoms of silicon?
Answer:
Mass = 0.084 g
Explanation:
Given data:
Mass of silicon = ?
Number of atoms of silicon = 1.8 × 10²¹ atom
Solution:
Avogadro number:
The given problem will solve by using Avogadro number.
It is the number of atoms , ions and molecules in one gram atom of element, one gram molecules of compound and one gram ions of a substance. The number 6.022 × 10²³ is called Avogadro number.
1 mole = 6.022 × 10²³ atoms
1.8 × 10²¹ atom × 1 mole / 6.022 × 10²³ atoms
0.299× 10⁻² mol
0.00299 mol
Mass of silicon:
Mass = number of moles × molar mass
Mass = 0.00299 mol × 28.1 g/mol
Mass = 0.084 g
The partial symbol for a particular ion is 26M2+ What are the number of electrons contained in one ion
Answer:
24
Explanation:
26-2=24 because when an atoms loses 2 electrons it gains 2+ charge
Balance equation PLEASSEEE HELPPP MEEE
Answer:
2AgNO₃ + MgCl₂ ⇒ 2AgCl + Mg(NO₃)₂
Explanation:
Match both sides of the equation. practice practice
Is a bell pepper a substance
How many oxygen atoms are there in
Fe203?
Answer:3 oxygen atoms.
Explanation: Each formula unit of Fe2O3 contains 2 atoms of iron and 3 atoms of oxygen (technically they are ions, but that doesn't matter).
"Indicate in each whether the following electron configurations correspond to an atom in its ground state, excited state, or is impossible."
a. [tex]{1s}^{2} {2s}^{2} {2p}^{4} [/tex]
b. [tex] {1s}^{2} {2s}^{2} {2p}^{3} {2d}^{1} [/tex]
c. [tex] {1s}^{2} {2s}^{2} {2p}^{3}{3s}^{1} [/tex]
d. [tex] {1s}^{2} {2s}^{1} {2p}^{2} [/tex]
e. [tex] {1s}^{2} {2s}^{2} {2p}^{1} [/tex]
f. [tex] {1s}^{2} {2s}^{3} [/tex]
Please, I really need help. I don't know what to do...
Answer:
Explanation:
Firstly, let's define what ground and excited state electronic configuration.
Ground state electronic configuration is when the electrons of the atom are in there lowest possible energy level while excited state electronic configuration is when electron(s) have moved to a higher energy level. Examples of these are provided in the options
a. 1s²2s²2p⁴ - This is a ground state electronic configuration (of oxygen) because the electrons are in there lowest possible energy level.
b. This option is not displaying (it is displaying something like an image that isn't loading)
c. 1s²2s²2p³3s¹ - We can see from this that an electron jumped from 2p energy level to 3s (p energy level ought to be completely filled with 6 electrons before another electron moves to the next energy level) meaning the electron is in it's excited state thus this is an excited state electronic configuration (of oxygen).
d. 1s²2s¹2p² - We can see from this also that an electron jumped from the 2s energy level to the 2p energy level (making it 2p² instead of 2p¹ in the ground state). The 2s energy level should ordinarily have 2 electrons. Thus, this is an excited state electronic configuration (of boron).
e. 1s²2s²sp¹ - This is a ground state electronic configuration (of boron) since all the electrons are in there lowest possible energy level.
f. 1s²2s³ - This configuration is impossible because the s energy level should only contain a maximum of 2 electrons, thus impossible to have 3 electrons in the s energy level
How do the physical and chemical properties of wood contribute to the function of the synthetic products made of wood?
Wood's tensile strength is reduced. Another risk factor for the strength of the wood is the loading time. The rigidity of wood is affected by temperature.
What is wood?Wood is one of the most common and useful natural materials. It is the main tissue that supports and conducts nutrients in trees and other plants. Wood comes in a variety of colours & grain patterns and is produced by numerous botanical species, comprising both gymnosperms & angiosperms.
Its wood's tensile strength is reduced. Another risk factor for the strength of the wood is the loading time. The rigidity of wood is affected by temperature. Unfavourable weather and unexpected temperatures will have an impact on the wood's strength. Among its attributes are mechanical, chemical, and physical qualities.
Therefore, wood's tensile strength is reduced. Another risk factor for the strength of the wood is the loading time.
To know more about wood, here:
https://brainly.com/question/10967023
#SPJ2
what is the octet rule?
Answer:
the octet rule is a chemical rule of thumb that reflects the observation that main group elements and bonds and such a way that each has a electrons in its valence shell giving the same electronic configuration as noble gas
A heat energy of 645 J is applied to a sample of glass with a mass of 28.4 g. Its temperature increases from –11.6 °C to 15.5 °C. Calculate the specific heat of glass.
Answer:838J/kg/K
Explanation:
use : Q= mS◇ T