How did the conflict or problem get more complicated? Identify at least two moments. in Amigo Brothers

Answers

Answer 1

In "Amigo Brothers," the conflict or problem gets more complicated when the two main characters, Felix and Antonio, realize that they may have to fight each other in the boxing tournament. This first moment occurs when they both win their semifinal matches and advance to the finals, setting up a potential conflict between their friendship and their desire to win the tournament. The second moment occurs when they are both training for the fight and realize that they are evenly matched, which adds another layer of complexity to the conflict. This is shown when the narrator describes how "they both knew that they were going to have to dig deep, to find something inside themselves that they had never found before" in order to win.

Related Questions

Answers

Answer:

Explanation:

In "Amigo Brothers," the conflict between Felix and Antonio becomes more complicated through various moments.

Firstly, the initial complication arises when both Felix and Antonio find out that they are competing in the same weight division of the Golden Gloves boxing tournament. This revelation intensifies the conflict as they realize that their paths might intersect and they could potentially face each other in the ring. This adds an extra layer of pressure and tension to their friendship.

Secondly, as the tournament progresses, the conflict deepens when Felix and Antonio begin to train separately. They start focusing on their individual strengths and strategies, which causes a divide between them. This separation not only affects their physical training but also strains their emotional connection. The boys find it challenging to balance their competitive spirit with the bond they share, leading to further complications in their friendship.

These moments of discovering their potential match-up and training separately create complexities within their relationship, highlighting the internal struggle they face in reconciling their friendship with the competitive nature of the boxing tournament.

For this application, you will write about the conflict within the story you read in this lesson, "Amigo Brothers." In one paragraph, answer the following questions:

What is the conflict in the story? (Or, what problem do the characters face?)
How did the conflict or problem get more complicated? Identify at least two moments.
How did the conflict resolve? (Or, how did the characters solve the problem?)

Answers

Answer:

Explanation:

In the short story "Amigo Brothers," the main conflict revolves around the friendship between two best friends and amateur boxers, Felix and Antonio. The problem they face is that they are both competing in the Golden Gloves boxing tournament, and if they win their respective weight divisions, they will have to face each other in the final match. The conflict becomes more complicated when the boys realize that their friendship might be at risk due to the intense competition. One moment that complicates the conflict is when Felix and Antonio start training separately and become distant from each other. Another moment is when they meet in the ring during the final match and must fight each other. However, the conflict ultimately resolves when they realize that their friendship is more important than winning the tournament. They decide to stop the fight and embrace, recognizing that their bond is stronger than any competition. By choosing their friendship over the conflict, they find a resolution that preserves their relationship and values.

Other Questions

noexplanation needed:) just answer!Incorporating a patient's cultural considerations, needs, and values O A. Is the least important component of Evidence Based Practice O B. Is optional, and is usually only practiced by advanced practi Students are comparing different tissues under the microscope. One student reports that mitosis was observed in cells of ground tissue. Was the student correct?A.No, because cells in permanent tissue do not divide, so mitosis would not be observed.B.No, because cells of some permanent tissues, such as collenchymas, can divide.C.Yes, because ground tissue is a permanent tissue that may divide under specialized conditions.D.Yes, because cells of some permanent tissues, such as sclerenchyma, can divide. An increase in income will result in a decrease in demand for a normal good an inferior good a substitute good a complementary good need helpWhich one of the following is an isomer of octane H.C. H C He HC H3C CH, HC H CH3 CH3 CH CH, , CH3 , CH, CH , CH3 H CH CH For the chemical reaction shown. 2HO(0)+ NH(1) 4HO(g) + N(g) determine how many grams of N are produced from the reaction of 8.13 g of HO2 and 6.48 g of NH4. - N produced An aquecus Mnf 2 solution is electrolyzed under 1 bar pressure using platinum electrodes. (a) Write the half-reactions predicted to occur at the anode and cathode, based on the standard cell potential (A) What is Whole-Exome Sequencing(WES)?(B)Discuss FIVE main steps in the WES workflow.(C) What is the difference between ChIP-Seq and WES in terms of their applications?(D) What analysis pipeline can be used to process exome sequencing data?(E) Give ONE limitation of WES compared to whole-genome sequencing(WGS) in identifying geneticvariants in the human genome. Two small spheres, with charges q = 2.6 x 10 *C and q = 7.8 x 10 C, are situated 4.0 m apart. They have the same sign. Where should a third sphere (q3 = 3.0 x 10-6C) be placed between the two so that q3 experiences no net electrical force? [6 marks] 1 2 4 m Variable Speed Motor Finally, a variable speed motor will be included in the design in Figure 2 so that the operator can adjust the blade speed to cut a wider variety of materials at different rates. This includes the ability to cut hardened steel that require blade speeds as low as 60 FPM. In addition, wood workpieces can be cutat faster rates, however, due to safety considerations the maximum blade speed should be no more than 3500 FPM Use the pulley diameters that you chose from the previous part and determine the minimum motor speed required for the blade to cut at 60 FPM with the transmission in tow and the maximum motor speed required to cut at 3500 FPM with the transmission in high. Show all of your work in the space provided and document your results in Table 3, Show your work Table 3: Variable Motor Upper/Lower Speeds Radians per second (rad/s) Revolutions per minute (RPM) Minimum motor speed Maximum motor speed Next, you will design the power transmission system for a multi-speed bandsaw to be used for cutting both soft materials (wood/plastic) and aluminum. To create curved cuts in wood, it is sometimes desired to work at lower blade speeds. In addition, lowering the blade speeds for some plastics may be beneficial to prevent the blade from getting too hot and melting the material. Harder materials, such as aluminum, require a slower cutting speeds. To allow for different cutting speeds, a three-speed transmission will be included in the design. Pulley 2 will have three different radii the belt can be moved to change the blade speed. You will need to choose an appropriate radius of Pulley 1. Pulley 2 will have three radii that need to be chosen to meet the below design specifications and to obtain the desired blade speeds. A block diagram of the bandsaw design is shown in Figure 3. Show all of your work on the next page and then fill out Table 2 that documents your results. As you carry out your analysis, be careful with units and make note if a radius or diameter is given. As a US company we will be using inches and feet units. Single Speed Design Specs: Idler/Drive Wheel Diameter: 26 inches Motor Speed: 1725 RPM Desired Blade Speed: o Wood (fast cut) 2200 100 FPM o Wood/Plastic (slow cut) 1000 100 FPM o Aluminum 600 + 50 FPM Available pulleys have diameters ranging between 1 inch and 20 inches. They are available in half inch size increments (1.0", 1.5", 2.0...20.0") . . Idler Wheel Blade Pulley 2 Pulley 1 3 Speed Transmition Motor Drive Wheel Figure 3 4 All the following are enzymatic actions during DNA replication except: O breaking, swiveling and reforming DNA ahead of the replication fork. O adding RNA nucleotides to the 3' end of the new daughter strand. O breaking hydrogen bonds between nitrogenous bases. O synthesising RNA primer. O joining neighbouring DNA fragments. Question 5 1 pts In prokaryotes which of these enzymes removes the RNA nucleotides at the 5' end of the Okazaki fragments and the leading strand and then replaces them with DNA nucleotides? DNA polymerase I. DNA polymerase III. ODNA ligase. O Topoisomerase. O Primase List ten different built-in functions and describe each with examples. 6. What happens if we don't assign a variable to an expression which evaluates a numerical value? a) MATLAB shows error b) Nothing happens c) The evaluated values are assigned to a variable ans automatically d) Depends on the numerical value 7. What does the Workspace show? a) Attributes of variables, functions from command window b) Attributes of variables, script files from command window c) Attributes of variables, script files, functions from command window d) Attributes of variables from command window Determine the following responses for the system described by the second order differential equation. 4x +32+ + 60x = f(t) 1. (a? > 4b) distinct, real roots: 8,53 *(t) = Cie"' + C + 2. (a? = 4b) repeated, real roots: 51, 51 x(1) = (C+1C2) + 3. (a = 0,6 > 0) imaginary roots: s = #jo, *(1) = C, sin or + C cos ar + w 4. (a 0,22 6. The Ames Test permits rapid screening for chemical carcinogens that are mutagens. The bacteria used for the Ames test are a special strain that lacks the ability to synthesize the amino acid ______a) glycine b) leucine c) phenylalanine d) histidine 7. The repetitive (TTAGGG) DNA-protein complexes at the ends of chromosomes, are crucial for the survival of cancer cells are maintained by the enzyme______. a) superoxide dismutase b) catalase c) reverse transcriptase d) telomerase 8. Kaposi's sarcoma is also known as a) Human papillomavirus b) Epstein-Barr virus c) Human herpesvirus- 8 d) Hepatitis B virus Select the item listed that is NOT a type of electrical transducer. o Resistance Pressure Transducer o Mechanical Pressure Transducer o Inductance Pressure Transducer o Differential Pressure Transducer quickly pleaseQ3) DOK 4 (4 Marks) In a fission reactor, develop a logical argument about what must be done to overcome the tendency of uranium-238 to absorb neutrons instead of undergoing fission. Using appropriate How is mitochondrial health related to healthy aging? What arethe problems and potential solutions? Evaluate the function for f(x) = x + 3 and g(x) = x 2. (fg)(9) (fg)(9) = T 3Evaluate the function for f(x) = x + 3 and g(x) = x 2. (f/g)(7) (f/g)(7) = X every climate region is unique and each has only one location on the planet group of answer choices false true EXPOUND & ANSWER THE QUESTION BRIEFLY AND GIVE INSIGHTS ANDCITE SOURCES ABOUT THE TOPIC. THANK YOUUWater management is an important aspect of electric power production. Identify at least two needs for water in a Rankine cycle-based power plant. Describe typical water management practices in such plants, and research at least two emerging technologies aimed at reducing water losses in plants or enhancing sustainable water management. : what is the cultural and/or spiritual impact of the orca decline - both on both indigenous and non-indigenous people?'