Answer:
By closely observing the sedimentary rock and the presence of organic materials and mineral grains in sedimentary rocks
Explanation:
The rock cycle explains how the three types of rock are formed over time from each other.
To use a sedimentary rock to prove that the rock cycle is a valid scientific model is by, closely observing the sedimentary rock. when the sedimentary rock is closed observed the principle of superposition will be seen ( i.e. younger segments deposited on top ), the presence of organic materials and mineral grains that can be found in Igneous or Metamorphic rocks can also be seen and this shows that Sedimentary rocks pass through the rock cycle. hence this proves that the rock cycle is a valid scientific model overtime
Which is an example of a chemical change?
A. heating a block of ice to form liquid water
B. heating a tungsten wire until it glows brightly
C. adding sugar crystals to water to form a clear, colorless liquid
D. passing an electric current through water to form hydrogen and oxygen
Answer:
D. passing an electric current through water to form hydrogen and oxygen
Explanation:
only one that's not just a physical change.
19) Which one of the following statements describes a chemical property of hydrogen gas?
A) Hydrogen gas has a density of 0.00009 g/cm’ at STP.
B) Hydrogen gas burns in air.
C) Hydrogen gas has a boiling point of 20. K at standard pressure.
D) Hydrogen gas is colorless.
object with a mass of 30 kg is observed to accelerate at the rate of 4 m/s2. Calculate the force required
Determine from the balanced chemical reaction if
the derived mole ratio is correct or incorrect.
2FeBr3 + 3Na2S → Fe2S3 + 6NaBr
2 moles FeBra
3 moles Na2S
Answer:
Correct
Explanation:
According to the balanced chemical reaction, 2 mol FeBr3 are consumed for every 3 mol Na2S consumed.
A balanced equation obey the law of conservation of mass. The coefficients are the numbers which are added to balance the chemical equation. Here the given mole ratio is correct.
What is a balanced equation?An equation in which the number of atoms of reactants and products on both sides of the equation are balanced is defined as the balanced chemical equation. The coefficients which are added in front of the formula of each component represents the number of the species.
A molar ratio denotes the ratio between the amounts in moles of any two compounds involved in a balanced chemical reaction. By comparing the coefficient of each component, the mole ratio can be determined.
Here for the given reaction, for every 3 moles of Na₂S consumption 2 moles of FeBr₃ is also consumed. So the molar ratio of Na₂S to FeBr₃ is 2/3. Molar ratios are used as the conversion factors between products and reactants in many chemistry problems.
To know more about mole ratio, visit;
https://brainly.com/question/29095152
#SPJ7
Sulfuric acid reacts with aluminum hydroxide by double replacement producing aluminum sulfate and water Write chemical reaction. If 30 g of sulfuric acid reacts with 25 g of aluminum hydroxide, identify the limiting reactant?
Answer: [tex]H_2SO_4[/tex] is the limiting reagent.
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
The balanced chemical equation is:
[tex]3H_2SO_4(aq)+2Al(OH)_3(aq)\rightarrow Al_2(SO_4)_3(aq)+6H_2O(l)[/tex]
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} H_2SO_4 =\frac{30g}{98g/mol}=0.31moles[/tex]
[tex]\text{Moles of} Al(OH)_3=\frac{25g}{78g/mol}=0.32moles[/tex]
According to stoichiometry :
3 moles of [tex]H_2SO_4[/tex] require = 2 moles of [tex]Al(OH)_3[/tex]
Thus 0.31 moles of [tex]H_2SO_4[/tex] will require=[tex]\frac{2}{3}\times 0.31=0.21moles[/tex] of [tex]Al(OH)_3[/tex]
Thus [tex]H_2SO_4[/tex] is the limiting reagent as it limits the formation of product and [tex]Al(OH)_3[/tex] is the excess reagent.
helllllppppppp pleaseeeeeee
help asap i don’t understand at all lol
Answer:
a, to reduce air bubbles
Explanation:
all its asking, is what is the purpose of the cover. and a is the most reasonable out of all of them, even though none of them make any sense.
Lunar Eclipse. Choose ALL that apply
Question 1 options:
Earth casts its shadow on the moon
The moon turns dark
Light from the sun is blocked
Earth is directly between the moon and sun
Question 2 (0.5 points)
Solar Eclipse: Choose ALL that apply
Question 2 options:
The Earth is directly between the moon and sun
Earth casts a shadow on the moon
Moon moves between the sun and Earth
The moon blocks out the light of the sun and casts a shadow onto the Earth
In this exercise we have to use the knowledge of lunar eclipse to identify the alternatives that correspond to this effect, as follows:
Light from the sun is blockedEarth is directly between the moon and sunWhat is lunar eclipse?A lunar eclipse happens when the Earth is between the Moon and the Sun, at times when they are aligned. Depending on the position of the Moon, it is total, partial or penumbral. Different stages of a lunar eclipse on a full moon night.
Now, use the knowledge of solar eclipse to identify the alternatives that correspond to this effect, as follows:
Moon moves between the sun and EarthThe moon blocks out the light of the sun and casts a shadow onto the EarthWhat is the definition of solar eclipse?Solar eclipse is an astronomical phenomenon that occurs when the Moon is positioned between the Earth and the Sun, hiding the light emitted by the star towards the planet.
See more about eclipse at brainly.com/question/25105283
Can someone double check my work? (Ideal Gas Law Equation)
I am solving for the amount of moles in two gases.
For one, it was 4.75mL at 0.5C (273.65K) and 1.2atm.
n=(1.2*4.75)/(0.0821/273.65)=(5.7/22.456)=0.25361653 moles
For the other gas, it was 4.6mL at 0.5C and 1.2atm.
n=(1.2*4.6)/(0.0821/273.65)=(5.52/22.456)=0.24581403 moles
Please double check these for any errors in math or whatever. Thank you.
I did not see any errors, i may be wrong but what i can see is that it is correct
2N2 + 502 --> 2N205
Based on the above reaction, if 7 moles of Ny react completely, how many moles of Oz must also react?
ASAP LOOK AT PICTURE
Answer:
wait are you talking about the bottom question??
Covert 50oC to k
(I’ll mark you as brainlister)
Answer:
323 K
Explanation:
To convert Celcius to kelvin first you need to remember this equation:
C + 273 = K (K = kelvin and C = celsius)
Next, you substitute with what you have given:
50 + 273 = K
Solve the equation by adding 50 and 273
k = 323
is copper an elementary substance or a compound?
What is the pH of an aqueous solution that has a hydroxide ion concentration of 1.0 x 10^-5 M?
Answer:
pH = 9
Explanation:
pOH = -log[OH-] = -log(1.0 x10^-5) = 5
pOH + pH = 14
pH = 14 - 5 = 9
4. A girl walked for 30 minutes. She noticed that she traveled farther in the first 15 minutes of
her walk than in the second 15 minutes,
What can she conclude about her walk?
A she walked over many hills
B
her average speed was faster during the first part of her walk
C. she walked in two different directions
D. she was walking at a constant speed
El etanol combustiona con el oxigeno produciendo dióxido de carbono gaseoso y agua: En un proceso se hacen reaccionar 450.2 g de dioxígeno con 998. 2 g de etanol . a) ¿Cuál de los reactivos es el limitante? b) Calcule la masa de dióxido de carbono que se formará c) ¿ Cuanto del reactivo en exceso quedará sin reaccionar?
Answer:
uh oh stinky uh oh stinky
is it true or false?
Answer:
The rainforest is teeming with animals and insects, so you would hear humming. Frogs and birds make some of the loudest rainforest sounds.
howler monkeys, are the loudest so i think that its false cause lost of animals are there but some can be quiet
Can someone please help me with the right answer? I only have one more attempt :(
Calcium carbonate decomposes into
calcium oxide and carbon dioxide.
The mass of calcium carbonate that
decomposes is 57 g. At the end of
the experiment, the mass of the
products were only 45 g. What can
we conclude from this information?
Answer:
The mass of carbon dioxide formed is 12g.
Which of the following have London dispersion forces?
a. methane
b. carbon tetrachloride
c. bromine trifluoride
d. all of the above
NH₄⁺(aq)+NO₃⁻(aq) → NH₄NO₃(s)
How much energy is released when 3 moles of NH₄+ react?
1) -25.69 kJ
2) -51.38 kJ
3) -77.07 kJ
4) -102.76 kJ
The graphic represents the Milky Way galaxy.
Which label best represents the location of our solar system within the milky way galaxy?
A
B
C
D
Answer:
planets,meteoroids and asteroids
Explanation:
1. When _____
are added or removed from an atom, _____
is formed
Answer:
1.) protons or electrons 2.) ion
Explanation:
Name
12. A chemist places a piece of solid magnesium in an aqueous solution of copper (II)
sulfate and notices a reaction. Pieces of solid copper dropped out of the solution as a
precipitate and magnesium sulfate was formed.
a) Give a balanced formula equation (with state symbols) for this reaction (3 marks)
Answer:
Explanation: Mg(s) + CuSO4 (aq) -> Cu(s) + MgSO4 (aq)
A water solution containing an unknown quantity of a
nonelectrolyte solute is found to have a freezing point of
–0.23°C. What is the molal concentration of the solution?
Answer:
The molal concentration of the solution is approximately 0.124 molal
Explanation:
The given parameters are;
The reduced freezing point of the water = -0.23°C
For freezing point depression of a solution, we have;
[tex]\Delta T_f[/tex] = [tex]K_f[/tex]· b·i
Where;
[tex]\Delta T_f[/tex] = The freezing point depression
[tex]K_f[/tex] = Cyroscopic constant (The freezing-point depression constant) = 1.86° Cm⁻¹ for water
b = The molality of the solution
i = van't Hoff factor = 1
Therefore;
[tex]\Delta T_f[/tex] = [tex]T^{\circ}_f - T_f[/tex]
Where;
[tex]T^{\circ}_f[/tex] = The freezing point of pure water = 0°C
[tex]T_f[/tex] = The freezing point of the solution = -0.23°C
∴ [tex]\Delta T_f[/tex] = [tex]T^{\circ}_f - T_f[/tex] = 0°C - (-0.23°C) = 0.23 °C
From, [tex]\Delta T_f[/tex] = [tex]K_f[/tex]· b·i, we have;
0.23°C = 1.86°C/m × b × 1
∴ b = (0.23°C/1.86°C/m) ≈ 0.124 molal
Therefore, the molal concentration of the solution, b ≈ 0.124 molal.
HELP!! 30 POINTS!!!! What does the energy graph look like for this reaction??
C3H8+5O2 -> 3CO2+4H2O
I have the data, I just need to know how to make the graph, please!!
total enthalpy of reactants= -103.85
total enthalpy of products= =-2147.81
=-2043.96 kJ/mol exothermic reaction
Answer:
Bottle Nose Dolphin ummmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
A beaker contains a sample of water with a mass of 325 grams. The water in the beaker
is boiled and weighed again after it cools. The new mass of the water is 305 grams. In
this example of the conservation of matter in physical changes,
A. the mass is less after it cools because water has less mass as a gas.
B. the mass of the water was 305 grams and the mass of the water vapor was 20 grams.
C. the process of boiling destroyed 20 grams of the water and left 305 grams of water.
D. the heat energy created by boiling water makes up the rest of the mass.
Answer: a
Explanation:
Bc I just did it and yeah
Which of the following can be used as lubricant
Answer:
Explanation:
B is the ans
pls mark BRAINLIEST
A plastic bag containing 2.2 L of gas at
1.0 atm pressure is cooled from 30°C to
0 °C. What will be the volume of the gas?
Answer: The volume of the gas is 1.98 L.
Explanation:
To calculate the final volume of the system, we use the equation given by Charles' Law. This law states that volume of the gas is directly proportional to the temperature of the gas at constant pressure.
Mathematically,
[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]
where,
[tex]V_1\text{ and }T_1[/tex] are the initial volume and temperature of the gas.
[tex]V_2\text{ and }T_2[/tex] are the final volume and temperature of the gas.
We are given:
[tex]V_1=2.2L\\T_1=30^oC=(30+273)K=303K\\V_2=?\\T_2=0^0C=(0+273)K=273K[/tex]
Putting values in above equation, we get:
[tex]\frac{2.2}{303}=\frac{V_2}{273}\\\\V_2=1.98L[/tex]
Thus the volume of the gas is 1.98 L
Height
O
Genetic
O Environmental
O Both
Answer:
its both because your hight can change if u do exercises
Hope it helped.
Colin decided to investigate soil erosion by water. He measured rates of erosion on
model hills made of soil, rock, and sand. Which of the following was the test
(independent) variable?
Answer:
i just had a test on this with 2 attempts and got it wrong on both but i do know that the answer is not...
the steepness of the models hillside
or
the rate of erosion on the hills
so the answer is either...
the amount of water sprayed on the hills
or
the type of material used to construct the model hills
but i think its the amount of water sprayed on the hills...i hope i helped a lil ;)
Explanation: