Answer:
A.
by explaining the patient’s chart
B.
by nodding at what the patient says
C.
by multitasking while speaking with the patient
D.
by writing down instructions for the patient to follow
Are the options.
Explanation:
How do you calibrate an electronic analytical balance
Explanation:
For the calibration process, use a weight that is 50% of the scale's capacity for accurate calibration. Weights less than 10% can result in inaccuracy. Make sure that the scale doesn't have any weights placed on it and nothing is rubbing against the scale or the platform.
Determine the number of molecules of C2CI4 contained in 73.1g of C2CI4
Answer:
2.35x10²³ molecules of C2Cl4 are present
Explanation:
To solve this question we must convert, as first, the mass of C2Cl4 to moles using its molar mass (C2Cl4 = 165.83g/mol). Then, using Avogadro's number we can find the number of molecules:
Moles C2Cl4:
73.1g * (1mol / 165.83g) = 0.441 moles C2Cl4
Molecules:
0.441 moles C2Cl4 * (6.022x10²³molecules / 1mol) =
2.35x10²³ molecules of C2Cl4 are presentTo obtain pure lead, lead (II) sulfide is burned in an atmosphere of pure oxygen. The products of the reaction are lead and sulfur trioxide (SO3). Write a balanced chemical equation for this process. How many grams of lead will be produced if 2.54 grams of PbS is burned with 1.88 g of O2? Express your answer to the correct number of significant figures. Be sure to show all steps completed to arrive at the answer. (Hint: be sure to work the problem with both PbS and O2).
Answer: 2.20 g Pb
They gave us the masses of two reactants and asked us to determine the mass of the product. We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.
Mᵣ: 239.27 32.00 207.2
2PbS + 3O₂ ⟶ 2Pb + 2SO₃
m/g: 2.54 1.88
When calcium forms an ion that has the same number of outer electrons as which noble gas?
1. neon
2. helium
3. argon
4. krypton
BRAINLIEST FOR HELP ASAP!!!!
What is the maximum number of moles of NaCl that can be produced from the reaction of 5.6 mol Na and 4.7 mol CI2?
2Na + Cl2 —> NaCl
What is the limiting reactant?
What is the excess reactant?
Answer:
Explanation:
Na + Cl2 —> NaCl
What is the ph of a HCl solution with a concentration of 2.51x10^-5M
Answer:
pH = 4.6
Explanation:
As hydrochloric acid (HCl) is a strong acid, the molar concentration of H⁺ species is the same as the molar concentration of the HCl solution. In other words:
[H⁺] = 2.51x10⁻⁵ MWith the information above in mind we can calculate the pH:
pH = -log[H⁺]pH = -log(2.51x10⁻⁵ M)pH = 4.6What property characterizes a spontaneous redox reaction?
A. A positive oxidation potential for the oxidation half-reaction
B. A positive reduction potential for the reduction half-reaction
C. A positive sum of the two half-reactions' standard potentials
D. A negative sum of the two half-reactions' standard potentials
Answer: C
Explanation:
Just took it :)
A positive sum of the two half-reactions' standard potentials is a property characterizes a spontaneous redox reaction. Hence, option C is correct.
What is spontaneous redox reaction?Spontaneous reactions are reactions in which no external force is applied to proceed with the reaction.
A spontaneous redox reaction maybe a sort of reaction during which there usually the discharge of energy where the electrons are transferred from anode to cathode and this is also known as the electrochemical cells equation the reactions result in the generation of electricity.
Redox reactions are reactions in which loss or gain of electrons occur between an atom.
In other words redox reaction between Zn and Cu²⁺ is spontaneous this is due to the difference in potential energy between these two substance.
A positive sum of the two half-reactions' standard potentials is a property characterizes a spontaneous redox reaction. Hence, option C is correct.
Learn more about spontaneous redox reaction, Here:
https://brainly.com/question/24297398
#SPJ5
For two acids of equal concentration, the stronger acid has-
What is the percentage of oxygen in C6H1206?
number of oxygen : 6
number of whole atoms in molchol :
6 + 12 + 6 = 24
Percentage of oxygen = n o o / n o a i m × 100
P o o = 6 / 24 × 100
P o o = 1/4 × 100
P o o = % 25
[tex]\huge{ \mathrm{ \underline{ Answer} \: \: ✓ }}[/tex]
Mass of elements in [tex]\mathrm{C_6H_{12}O_6}[/tex] are :
O = [tex]16 u[/tex]C = [tex]12 u[/tex]H =[tex] 1 u[/tex]Total mass of [tex]\mathrm{C_6H_{12}O_6}[/tex] is :
[tex](12u \times 6) + (1u \times 12) +( 16u \times 6)[/tex][tex]72u + 12u + 96u[/tex][tex]180u[/tex]Total Mass of Oxygen in [tex]\mathrm{C_6H_{12}O_6}[/tex] is :
[tex]16u \times 6[/tex][tex]96u[/tex]Percentage of Oxygen by mass in [tex]\mathrm{C_6H_{12}O_6}[/tex] is :
[tex] \boxed{ \frac{total \: \: mass \: \: of \: \: oxygen}{total \: \: mass \: of \: glucose } \times 100 } [/tex]
[tex] \dfrac{96u}{180u} \times 100[/tex][tex] \dfrac{32u}{3u} \times 5[/tex][tex] \dfrac{160u}{3u} [/tex][tex]53.33 \: \%[/tex]_____________________________
[tex]\mathrm{ ☠ \: TeeNForeveR \:☠ }[/tex]
Many scientists are studying tiny particles called nanoparticles, Which best
describes how the scientists are probably trying to learn about these
particles?
Answer:
By experimenting
Explanation:
What is the IUPAC name for the following compound?
a. benzenecarbonitrile
b. benzenecyanide
c. phenylcyanide
d. cyanophenyl
Answer:
Option a. Benzenecarbonitrile
Explanation:
You are not providing the picture of the compound. However, I manage to find the picture of it, so I'm gonna answer this with the picture. Its attached here at the end.
As for the IUPAC name of this compound, it would be Benzenecarbonitrile, or simply, benzonitrile.
This compound has the molecular formula C₆H₅CN. It receives this name over the other ones, because this is a aromatic cyanide, and aromatic cyanide has nitriles behavior, (Strength of the nitrogen over the carbon), therefore, this group has priority over the whole molecule. As the principal chain is the benzene, the carbonitrile is the radical of the group, and when cyano groups are as radical and not as principal chains, it has a behavior of nitrile, and it's named as nitrile. therefore, option b, cannot be the name.
phenylcyanide is naming the phenyl as radical, but the benzene is the principal group in this compound, and the cyanide is the radical. It happens the same thing with cyanophenyl.
Hope this helps
It is July in Georgia and you buy a balloon at the grocery store for a friend's birthday.
It is cold inside in the store, but when you go outside, it is very hot. What happens
to the volume of the balloon as the temperature changes from cold to hot?
Help meee
Answer:
it is cold inside in the store
concentrated phosphoric acid is90% H3PO4 by mass and the remaining mass is water. The molarity of H3PO4 is 12.2M at temperature (a) what volume (mL) of this solution is needed to make a 1.00L solution of 1.00M phosphoric acid?
Answer:
82.0 mL
Explanation:
Step 1: Given data
Concentration of concentrated acid (C₁): 12.2 MVolume of concentrated acid (V₁): ?Concentration of dilute acid (C₂): 1.00 MVolume of dilute acid (V₂): 1.00 LStep 2: Calculate the required volume of the concentrated acid
We want to prepare a dilute solution from a concentrated one. We can calculate the volume of the concentrated acid using the dilution rule.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 1.00 M × 1.00 L / 12.2 M = 0.0820 L = 82.0 mL
When 1 mol of a nonvolatile, nondissociating solute is dissolved in 3 mol of volatile solvent, the ratio of vapor pressure of the solution to that of the pure solvent (at the same temperature) is approximately:________
Answer:
[tex]\frac{P_{solution}}{P_{solvent}^{vap}} =0.75[/tex]
Explanation:
Hello there!
In this case, since the solvation of a nonvolatile-nondissociating solute in a volatile solvent is modelled via the Raoult's law:
[tex]P_{solution}=x_{solvent}P_{solvent}^{vap}[/tex]
Thus, we can calculate the ratio of the vapor pressure of the solution to that of the pure solvent, mole fraction, as shown below:
[tex]x_{solvent}=\frac{P_{solution}}{P_{solvent}^{vap}} =\frac{n_{solvent}}{n_{solute}+n_{solvent}}[/tex]
Thus, we plug in the moles of solvent and solute to obtain:
[tex]\frac{P_{solution}}{P_{solvent}^{vap}} =\frac{3}{3+1}\\\\ \frac{P_{solution}}{P_{solvent}^{vap}} =0.75[/tex]
Regards!
What answer is it and how ? please help !!!!!! ill mark brainlyest if right
Answer:
The answer is B
Brainliest please!
Predict whether S for each reaction would be greater than zero, less than zero, or too close to zero to decide.
a. H2(g)+Cl2(g)→2HCl(g)
b. 2H2O2(l)→2H2O(l)+O2(g)
c. CO(g)+3H2(g)→CH4(g)+H2O(g)
d. CH4(g)+2O2(g)→CO2(g)+2H2O(g)
e, 2SO3(g)→2SO2(g)+O2(g)
Answer:
a. Too close to zero.
b. Higher than zero.
c. Lower than zero.
d. Too close to zero.
e. Higher than zero.
Explanation:
The entropy of a reaction, S, is positive when the disorder of the system increases. That is:
Solid → Liquid → Gas S>0
When S<0, the disorder decreases:
Gas → Liquid → Solid S<0
Thus:
a. H2(g)+Cl2(g)→2HCl(g)
2 moles of gas produce 2 moles of gas:
S too close to zero.
b. 2H2O2(l)→2H2O(l)+O2(g)
A liquid is producing a gas:
S>0
c. CO(g)+3H2(g)→CH4(g)+H2O(g)
4 moles of gas produce 2 moles of gas, the disorder decreases:
S<0
d. CH4(g)+2O2(g)→CO2(g)+2H2O(g)
3 moles of gas produce 3 moles of gas:
S too close to zero.
e, 2SO3(g)→2SO2(g)+O2(g)
2 moles of gas produce 3 moles of gas.
S>0
A solid sample is hit with a hammer and breaks into jagged, irregular shards. What type of solid was it? A) molecular solid b) network solid c) ionic solid d)metallic solid
I honestly don't know the answer
WHAT CAN YOU LEARN OR (LEARNING GOAL) ABOUT MITOSIS AND CELL CYCLE?
Explanation:
At the end of mitosis, the new daughter cells contain the same number of chromosomes as the parent cell. Mitosis enables cellular growth and repair in multicellular organisms.
What is the biggest problem with radioactive waste?
O A. It cannot be recycled.
B. There is a large amount of it.
O C. It has a very long half-life.
O D. It generates a lot of heat.
Explanation:
It has a very long half-life.
The biggest problem with radioactive waste is that it has a very long half-life.
Sound waves with a large distance between A and B would be sound waves that have a large
es
and produce loud sounds.
Answer:
Wavelength
Explanation:
Pls give me Brainliest
Convert 25 degrees Celsius to Farenheit.
Answer:
(25°C × 9/5) + 32 = 77°F
Explanation:
hope this helps
Answer:
Im 98% sure it's 77 F
Calculate the specific heat of a substance given that 49 joules of heat is required to raise the temperature of 25.0 g of the substance from 92.6 ºC to 99.4 ºC.
Answer:
0.29 J/g.°C
Explanation:
Step 1: Given data
Added heat (Q): 49 JMass of the substance (m): 25.0 gInitial temperature: 92.6 °CFinal temperature: 99.4 °CStep 2: Calculate the temperature change (ΔT)
ΔT = 99.4 °C - 92.6 °C = 6.8 °C
Step 3: Calculate the specific heat of the substance (c)
We will use the following expression.
Q = c × m × ΔT
c = Q / m × ΔT
c = 49 J / 25.0 g × 6.8 °C = 0.29 J/g.°C
In the acetylene torch, acetylene gas (C2H2) burns in oxygen to produce carbon dioxide water and energy. How many moles of CO2 are formed from the reaction with 1.20 moles of C2H2?
Given the following equation
2C2H2(g) + 502(g) = 4CO2(g) + 2H2O(g)
Answer: 2.40 moles of [tex]CO_2[/tex] will be formed in the reaction.
Explanation:
Given values:
Moles of [tex]C_2H_2[/tex] = 1.20 moles
The given chemical equation follows:
[tex]2C_2H_2+5O_2\rightarrow 4CO_2+2H_2O[/tex]
By the stoichioemetry of the reaction:
If 2 moles of [tex]C_2H_2[/tex] produces 4 moles of carbon dioxide
Then, 1.20 moles of [tex]C_2H_2[/tex] wil produce = [tex]\frac{4}{2}\times 1.20=2.40mol[/tex] of carbon dioxide
Hence, 2.40 moles of [tex]CO_2[/tex] will be formed in the reaction.
Ammonia will decompose into nitrogen and hydrogen at high temperature. An industrial chemist studying this reaction fills a 5.0L flask with 4.5 atm of ammonia gas, and when the mixture has come to equilibrium measures the amount of nitrogen gas to be 1.1 atm. Calculate the pressure equilibrium constant for the decomposition of ammonia at the final temperature of the mixture. Round your answer to 2 significant digits.
Answer:
Kp = 7.4727
Explanation:
Let's write the balanced equilibrium reaction:
2NH₃ <-------> N₂ + 3H₂ Kp = ??
Now, if we want to calculate the Kp, we need to write an ICE chart with this reaction, which is the following:
2NH₃ <-------> N₂ + 3H₂
I. 4,5 0 0
C. -2x +x +3x
E. 4,5-2x x 3x
According to this chart, the Kp expression should be:
Kp = (PH₂)³ * (PN₂) / (PNH₃)² (1)
The value of x, we already know it because the problem states that the amount of nitrogen gas is 1.1 atm, so replacing this value into (1) we have:
Kp = (3*1.1)³ * (1.1) / (4.5 - (2 * 1.1))²
Kp = 39.5307 / 5.29
Kp = 7.4727Hope this helps
Write the structure of all possible peptides containing these amino acids: Asp, Glu, Gln Use single letter abbreviations and capital letters only; i.e. GYR, not Gly-Tyr-Arg. If there are fewer than 6 peptides, leave an appropriate number of answer boxes empty. fill in the blank 1 , fill in the blank 2 , fill in the blank 3 , fill in the blank 4 , fill in the blank 5 , fill in the blank 6
Answer:
QED, EDQ, DQE, EQD, DEQ, QDE
Explanation:
The structure of all possible peptides that contain the given amino acids are :
QED, EDQ, DQE, EQD, DEQ, QDE
where : Asp is represented by the letter code D
Glu is represented by the letter code E
Gln is represented by the letter code Q
Note : when three amino acids combine they form what is known as tripeptide ( i.e. contains two peptide linkages ) while a peptide linkage is been formed by the combination of a carboxyl group of an amino acid and the amino group of different amino acid
1. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:a) -CH3
b) -CH2OH
c) -CH2NH2
d) -CH2BR2. Arrange the following groups in order of decreasing priority that would allow you to determine E/Z, or R/S. Provide a string of letters (e.g. abcd) as an answer with the highest priority listed first, lowest priority last:a) -F
b) -CH2OH
c) -CHO
d) -CH3
Answer:
1. CH₂Br > CH₂OH > CH₂NH₂ > CH₃
2. -F > -CHO > - CH₂OH > CH₃
Explanation:
The arrangement of the above atom is due to their atomicity and electronegativity of the given compounds.
From (1) we will realize that Bromine (Br) possesses the greatest priority because its atomic number is the highest. This is followed by oxygen (O) in CH₂OH since atomic no 8 is higher than that of Nitrogen N(7). Lastly, CH₃ has the only hydrogen attached to it with the atomic no of (1)
In the second part of the question>
The electronegativity of an element increases across the period and down the group. Fluorine is highly electronegative and contains the highest atomic number of oxygen in -CHO. The oxygen (O) in -CHO has a double bond which gives an edge over the (O) in CH₂OH. Lastly, CH₃ contains a substituted hydrogen atom
What volume is occupied by 2.0 mol of gas at 3.0 atm
and 27 °C?
At which temperature is water in its gas phase (water vapor)?
Group of answer choices
-40
40
140
12 moles of sodium into grams
Answer:
12 moles sodium= 275.87724000000003 grams
Explanation:
1 moles sodium = 0.043497607849056.
Help Anyone! What would be the correct answer to this question?