Answer:
They don’t ‘represent’ anything, they are properties of the wave.
Depending on the type of wave, we experience them as various phenomena. For example, with a sound wave we experience frequency (or wavelength, which is just another way to describe the same property) as the pitch of the sound. We experience amplitude as the loudness of the sound, although due to the characteristics of the ear, frequency also effects perceived loudness.
If the wave is a light wave, we experience the frequency (wavelength) as the colour of the light, and the amplitude as the brightness of the light.
For many waves, we don’t perceive them at all (e.g. radio waves).
For ocean waves, frequency is the time for each peak or trough to reach us, and amplitude is how tall the wave is.
Pam is running in a race at 3.3 m/s and accelerates at a rate of 3 m/s for the last 15 meters. How fast is she running when she crosses the finish line?
Answer:
Pam's velocity when she crosses the finish line is 10 m/s.
Explanation:
Given;
initial velocity of Pam, u = 3.3 m/s
acceleration of Pam, a = 3 m/s²
last distance covered, d = 15 m
let her final velocity = v
Apply the following kinematic equation to determine Pam's final velocity;
v² = u² + 2ad
v² = 3.3² + 2(3)(15)
v² = 10.89 + 90
v² = 100.89
v = √100.89
v = 10 m/s
Therefore, Pam's velocity when she crosses the finish line is 10 m/s.
A bear fells from 10m long grass
From where the bear is
Susan gently pushes the tip of her finger against the eraser on her pencil and the pencil does not move. Which of the
following figures best illustrates the interaction of forces between Susan's finger and her pencil?
Answer: D. ➡️⬅️
Explanation: I just knew the answer ;)
Why is diffraction used in soil profiles?
Answer:X-ray diffraction (XRD) is the technique most heavily relied on in soil mineralogical analysis. X-ray diffraction is a technique that provides detailed information about the atomic structure of crystalline substances. It is a powerful tool in the identification of minerals in rocks and soils.
Explanation:
XRD is used to identify the minerals composing clay-rich, hydrothermally altered rocks that occur on several Cascade volcanoes. Such rocks are believed to play an important role in the generation of large landslides and mudflows. XRD is used to analyze saline minerals, including borates.
a light ray reflects with an angle of 65 degrees what is the angle of refraction?
A. 65 degrees
B. 90 degrees
C. 32.5 degrees
D. 25 degrees
brainliest if correct
Answer:
A
Explanation:
Khalid has been studying the gravitational attraction between three pairs of objects. The table shows the distance between each pair and the gravitational attraction between them relative to the other pairs. Which two objects have the greatest
gravitational force, Explain Your Answer?
Answer:
Explanation:
Probably the most famous force of all is gravity. We humans on earth think of gravity as an apple hitting Isaac Newton on the head. Gravity means that stuff falls down. But this is only our experience of gravity. In truth, just as the earth pulls the apple towards it due to a gravitational force, the apple pulls the earth as well. The thing is, the earth is just so massive that it overwhelms all the gravity interactions of every other object on the planet. Every object with mass exerts a gravitational force on every other object. And there is a formula for calculating the strengths of these forces, as depicted in the diagram below:
Diagram of gravitational forces between two spheres
Diagram of gravitational forces between two spheres
Let’s examine this formula a bit more closely.
F refers to the gravitational force, the vector we ultimately want to compute and pass into our applyForce() function.
G is the universal gravitational constant, which in our world equals 6.67428 x 10^-11 meters cubed per kilogram per second squared. This is a pretty important number if your name is Isaac Newton or Albert Einstein. It’s not an important number if you are a ProcessingJS programmer. Again, it’s a constant that we can use to make the forces in our world weaker or stronger. Just making it equal to one and ignoring it isn’t such a terrible choice either.
m_1m
1
m, start subscript, 1, end subscript and m_2m
2
m, start subscript, 2, end subscript are the masses of objects 1 and 2. As we saw with Newton’s second law (\vec{F} = M\vec{A}
F
=M
A
F, with, vector, on top, equals, M, A, with, vector, on top), mass is also something we could choose to ignore. After all, shapes drawn on the screen don’t actually have a physical mass. However, if we keep these values, we can create more interesting simulations in which “bigger” objects exert a stronger gravitational force than smaller ones.
\hat{r}
r
^
r, with, hat, on top refers to the unit vector pointing from object 1 to object 2. As we’ll see in a moment, we can compute this direction vector by subtracting the location of one object from the other.
r^2r
2
r, squared refers to the distance between the two objects squared. Let’s take a moment to think about this a bit more. With everything on the top of the formula—G, m_1m
1
m, start subscript, 1, end subscript, m_2m
2
m, start subscript, 2, end subscript—the bigger its value, the stronger the force. Big mass, big force. Big G, big force. Now, when we divide by something, we have the opposite. The strength of the force is inversely proportional to the distance squared. The farther away an object is, the weaker the force; the closer, the stronger.
Hopefully by now the formula makes some sense to us. We’ve looked at a diagram and dissected the individual components of the formula. Now it’s time to figure out how we translate the math into ProcessingJS code. Let’s make the following assumptions.
We have two objects, and:
Each object has a PVector location: location1 and location2.
Each object has a numeric mass: mass1 and mass2.
There is a numeric variable G for the universal gravitational constant.
Given these assumptions, we want to compute a PVector force, the force of gravity. We’ll do it in two parts. First, we’ll compute the direction of the force \hat{r}
r
^
r, with, hat, on top in the formula above. Second, we’ll calculate the strength of the force according to the masses and distance.
Remember when we figured out how to have an object accelerate towards the mouse? We're going to use the same logic.
Define Initial velocity.
Answer:
Initial velocity is defined as the velocity at time t=0.
Its Unit is m/s.
represented by u.
calculated by using formula.
v=u+at
u=v-at.
Answer:
Initial velocity is the velocity which the body has in the beginning of the given time period
Hope it helps
-------☆ﾟ.･｡ﾟᵴɒƙυᴚᴀ_ƨȶäᴎ❀
Hi, I'm stuck on the problem: Consider a resistor (R=1000 kΩ) and a capacitor (C=1μF) connected in series. This configuration is connected in series to a battery with an emf of 10 V. Find the maximum voltage in [V] across the capacitor. Find the maximum charge on the capacitor in [µC]. How long will it take until the capacitor has a potential difference of 5 V?
Answer:
Following are the responses to the given choices:
Explanation:
The maximum pressure is 10 V from across condenser.
The highest charge mostly on condenser.
[tex]vc = 10\times 1\ mf\\\\[/tex]
[tex]= 10^{-5}\ C[/tex]
The time it takes for the condenser to be 5 V different.
[tex]time = ln_2 \times 1000 \times 1mf[/tex]
[tex]=0 .69 \times 10^{-3}\ sec[/tex]
Which geologic events occur most often at this mid-oceanic ridge plate
boundary? *
2 points
Mid-oceanic ridge
plate boundary
Shelf
Sea level
Patella
Plate 2
Continental
crust
Rigid mantle
Asthenosphere
magnetic pole reversals and cooling of ocean water
hydrospheric pollution and adiabatic heating
earthquakes and volcanic eruptions
Answer: Earthquakes and Volcanic eruptions
Explanation:
You did not attach a picture however, this should be the correct answer.
Mid-oceanic ridge plate boundaries such as the Mid-Atlantic Ridge form as a result of plate separating at the boundary. This leads to earthquakes due to the forces of tension acting on the plates.
When this happens, the mantle is exposed and therefore there will be volcanic eruptions as the lava comes to the surface as magma. When this magma cools it creates new seafloors and underwater mountains.
True or False. Can Metalloids conduct electricity under certain conditions?
can metalloids conduct electricity under certain conditions?
true
Suppose you take
a short piece of wire that is not
attached to anything and move it up and down in a
magnetic field. Explain whether or not a current will be
induced, and why.
Answer:
a current will be induced.
Explanation:
Answer:
Explanation:Sample Response: A current will not be induced because the wire is not part of a closed circuit. The electrons have no place to flow to.
What did you include in your response? Check all that apply.
A current will not be induced.
The wire is not part of a closed circuit.
An astronaut lands on an alien planet. He places a pendulum (L = 0.200 m) on the surface and sets it in simple harmonic motion, as shown in this graph.
(a) What is the period and frequency of the pendulum’s motion?
(b) How many seconds out of phase with the displacements shown would graphs of the velocity and acceleration be?
(c) What is the acceleration due to gravity on the surface of the planet in? Determine the number of g-forces.
Show any necessary calculations.
If a person has the genotype Rr for hair where red is dominant to blue, what phenotype would this person have?
the person's phenotype would be red hair. phenotype is what you see on the outside, genotype is what the dna says. <3
Violet light (410 nm) and red light (685 nm) pass through a diffraction grating with d = 3.33 x 10-6 m. What is the angular separation between them for m = 2?
Answer:10.03
Explanation:
right on acellus
Why can elastic band particles stay together
Answer:
The particles are held rigidly in place by all the other particles around them so they can't slip past one another or move apart. This gives solids a fixed shape and a fixed volume.
~Chapter Name: Heats and its effects ~
(Collecting Information)
how does a veterinary doctor (a doctor who treats animals) find out the body temperature of domestic animals or birds?
Go to the nearest veterinary clinic and find out
(I don't have a clinic near it miles away so pls help)
Answer:
Either orally or rectally
Explanation:
(I didn't visit the vet clinic, I just searched it up)
It depends on the animal. You can't check a birds temperature with a thermometer because it will rupture its cloaca gland but you can check its poop.
Answer:
thermometer is used by veterinary doctors to find out the temperature of domestic animals .
A mother has the genotype Bb for brother green eyes, the months did heterozygous hair, what is the genotype of the father ?
Assuming brown hair (B) color is completely dominant over blond hair (b), then the father's genotype must be bb.
How does a recessive allele “show up” to be seen?
Answer:
Recessive alleles only show their effect if the individual has two copies of the allele.
Explanation:
Dominant and Recessive Alleles If your allele pair is FF or Ff, you will have freckles. The only way you can escape a freckled face is to inherit the recessive gene from each parent, giving you the ff allele pair. In general, recessive alleles show up in your phenotype only if you have two of them.
An iron atom (Fe) has 26 protons in it. If the atom has 20 electrons in it, explain what type of charge it has and how you can tell.
Answer:
The iron atom has a positive charge, making it a cation.
Explanation:
The atom has a nucleus, where the protons and neutrons, which are the subatomic particles with the highest mass, are located. Practically all the mass of the atom is concentrated in the nucleus.Protons have a positive electrical charge, while neutrons have no charge.
Electrons move around the nucleus with other negatively charged particles.
An iron atom (Fe) has 26 protons and 20 electrons in it. That is, there are 6 more protons than electrons. As mentioned, protons are positively charged. So the iron atom has a positive charge, making it a cation.
How are wave properties and energy related?
EXPLAIN
Answer:
The higher the amplitude, the higher the energy. To summarise, waves carry energy. The amount of energy they carry is related to their frequency and their amplitude. The higher the frequency, the more energy, and the higher the amplitude, the more energy.
I need help
With this
Answer:
dfvgxbcjnhmv,kbl
Explanation:
fvgbnhjmk
If a=15 m/s², m=2 kg, F=? *
30 N
30kg
30 m/s²
7.5 N
Answer:
F = 30 N
Explanation:
Cold packs are designed to become very cold when activated. When the pack is activated, a chemical reaction occurs to make the temperature of the cold pack decrease. What must be true of this chemical reaction? (2 points) The reaction releases energy to its surroundings. The reaction releases energy to its surroundings. The products and reactants have the same amount of energy. The products and reactants have the same amount of energy. The products have less energy than the reactants. The products have less energy than the reactants. The reaction absorbs energy from its surroundings.
Answer:
The reaction absorbs energy from its surroundings.
Explanation:
An endothermic reaction is any reaction in which energy is absorbed by the reaction system.Thus implies that energy is withdrawn from the environment A cold pack's function is based on an endothermic chemical reaction.
The absorption of energy by the reaction system means that the environment feels cool in an endothermic reaction.This manifests in a decrease in the temperature of the cold pack.
You have viewed multiple unknown astronomical objects in this lab activity. In all tests, what was your test variable (independent variable)?
The amount of an element in each object
The type of elements in each spectrum
The astronomical object viewed by the spectrometer
Answer:
Could you give information about the lab
Explanation:
Answer:
The spectrum of each astronomical object
Explanation:
I took the test and got it right
The atomic number is equal to the number of _________ in the atom.
Question 8 options:
protons
protons and neutrons
neutrons
protons, neutrons, and electrons
Answer:
Proton
Explanation:
Atomic number, the number of a chemical element in the periodic system, whereby the elements are arranged in order of increasing number of protons in the nucleus. Accordingly, the number of protons, which is always equal to the number of electrons in the neutral atom, is also the atomic number.
can someone help me pls
Answer: food, female water
Explanation:
Can I have brainliest
Answer : dog horse cat lion deer moose tiger cheetah hippopotamus zebra rabbit penguin dolphin shark fish
Explanation:
(b) The cylinder shown in figure 2 is fitted with a freely sliding piston containing an ideal gas of mass 13g and volume 1.0×10⁴ cm⁵ . The tempreture of the gas is 25°C and it is initially at atmospheric pressure.
(i) The gas is heated to a Tempreture of 400°C . what is the new volume of the gas?
Answer:
22600 cm³ (3 s.f.)
Explanation:
Please see the attached picture for the full solution.
Nanotechnology is currently used in electronics for
organ repair, data storage, and wires.
organ repair, quantum dots, and carriers.
data storage, OLEDs, and wires.
carriers, OLEDs, and skin transplants.
Answer:
data storage, OLEDS, and wires
Explanation:
Nanotechnology is currently used in electronics for data storage, OLEDs, and wires. Option C is correct.
What is nanotechnology?Nanotechnology is the near-atomic manipulation of matter to create new structures, materials, and gadgets.
The technique offers scientific improvement in a variety of fields, including medical, consumer goods, energy, materials, and manufacturing.
Nanotechnology is currently used in electronics for data storage, OLEDs, and wires.
Hence, option C is correct.
To learn more about the nanotechnology, refer;
https://brainly.com/question/11946759
#SPJ2
How come we can see orange? In simple words.
Answer:
When sunlight shines through an orange solution, the violet, blue and green wavelengths are absorbed. The other colors pass through.
Which wave has the lowest amplitude?
Wave D has the lowest amplitude. The highest point of a wave is called amplitude.
What is amplitude?The distance between from the crest of a wave to the next crest is known as the amplitude. It is denoted by a.
The standard equation for the SHM is found as;
[tex]\rm y = asin \omega t[/tex]
Where, a represent the amplitude of the wave.
In the wave D it is observed that the distance from center axis to the highest point of the wave is smallest. Hence, wave D has the lowest amplitude.
To learn more about the amplitude, refer to the link;
https://brainly.com/question/8662436
#SPJ2
Answer:
To summarize what the expert answer said, it's the last box.
Explanation: