Answer:
No
Explanation:
Please let me know if my answer is correct
Mary is allergic to cats. Mary's friend, Sue, has a roommate who has cats. Whenever Mary visits Sue, Mary sneezes even before she enters Sue's house. Mary's sneezing persists even after Sue's roommate and his cats have moved out. After a while, Mary stops sneezing before she enters Sue's house. The point at which Mary's sneezing stopped is an example of _____.
Answer: Extinction
Explanation: Extinction simply means cessation. A condition whereby an action or behavior exhibited by an individual or organism eventually stops. In psychological parlance, extinction is usually attributed to the discontinuance of a certain behavior usually due to non - reinforcement or eventual absence of the conditioned stimulus.
In the scenario above, the point at which Mary stopped sneezing is called extinction which is due to the removal of the cat which is the cause of Mary's sneezing behavior.
A girl runs up the down escalator in the mall. If the escalator is moving with a
velocity of 24 m/min and the girl is running with a velocity of 30 m/min, how far up the escalator can she go in 4 minutes?
A. 10 m
B. 30 m
C. 48 m
D. 24 m
Answer:
D. 24 m
Explanation:
Running up - velocity + 30 m/min
Escalator 's moving down velocity - 24 m/min
Sum velocity (30 - 24) = 6 m/min
6 m/min * 4 min = 24 m
The graph below shows the conservation of energy for a skydiver jumping out
of a plane and landing safely on the ground. Which energy is represented by
line B?
A. Elastic energy
B. Kinetic energy
C. Light energy
D. Potential energy
Answer:
The correct option is:
B) Kinetic Energy
Explanation:
We know that if a body is placed at a certain height, it possesses Potential Energy, which is represented by 'mgh'. In this case, when the skydiver is present in the plane, before jumping, he has potential energy as he is at height 'h'.
As Kinetic energy is given as '(1/2)mv²' dependent on velocity of the object, when the skydiver jumps of the plane, his height starts decreasing, which decreases his Potential Energy. As energy can neither be created or destroyed, but is converted to one form or another, all this Potential energy starts to convert into Kinetic energy. As Potential Energy decreases with distance, Kinetic energy increases. Hence, line B represents Kinetic Energy.
what are three reasons we should be concerned about the current rapid extinction rate
Answer:
1. Possibility of all life being wiped out
2. Ecosystem being imbalanced.
3. Loss of one species triggers the lost of others as the food chain will collapse.
Answer:
a
Explanation:
Why does the pattern of colors repeat in a thin soap film? Please use 2 content related sentences. (ref: p.522-530)
Answer: The pattern of colors that repeat in a thin soap film is a result of the interference of light waves reflecting off the front and back surfaces of the film. The specific colors seen are determined by the thickness of the film, with different wavelengths of light being reflected or refracted at different angles, creating the characteristic rainbow pattern.
Why is this equation wrong?
Answer:
It is not possible to find the square root in such a way
Explanation:
What are data?
A. Pieces of information recorded in an experiment
B. Sources that summarize a primary source
C. Educated guesses about the outcome of an experiment
D. Variables that are adjusted by the experimenter
SUBNIIT
Answer:
Data is pieces of information recorded in an experiment because data are individual pieces of factual answer recorded and used for the analysis
Explanation:
I hope this will help you :)
"We the people of the United States, in order to form a more perfect union, establish justice, insure domestic tranquility, provide for the common defense, promote the general welfare, and secure the blessings of liberty to ourselves and our posterity, do ordain and establish this Constitution for the United States of America." - The United States Constitution According to the Preamble, which action would be allowed by The Constitution?"We the people of the United States, in order to form a more perfect union, establish justice, insure domestic tranquility, provide for the common defense, promote the general welfare, and secure the blessings of liberty to ourselves and our posterity, do ordain and establish this Constitution for the United States of America." - The United States Constitution According to the Preamble, which action would be allowed by The Constitution? A) helping businesses pay their workers less B) giving Congress the power to create courts C) granting government the power to seize people's property D) securing the rights of the wealthy over the rights of the poor
The correct answer is B) Giving Congress the power to create courts
Explanation:
One of the principles the Constitution mentions in the preamble is Justice, this is mentioned in "We the people of the United States, in order to form a more perfect union, establish justice..." According to this, a priority is to make the country have justice, which is possible through courts, laws, among others. In this context, the action that would be allowed is "Giving Congress the power to create courts" because this might ensure the justice principle is applied in the U.S.
A camera lens focuses on an object 75.0 cm from the lensThe image forms 3.50 cm behind the lens. What is the magnification of the image?
Answer:
7/150
Explanation:
The following data were obtained from the question:
Object distance (u) = 75cm
Image distance (v) = 3.5cm
Magnification (M) =..?
Magnification is simply defined as:
Magnification (M) = Image distance (v)/ object distance (u)
M = v /u
With the above formula, we can obtain the magnification of the image as follow:
M = v/u
M = 3.5/75
M = 7/150
Therefore, the magnification of the image is 7/150.
Answer:
-0.0466
Explanation:
A car has a mass of 8000 kg and a kinetic energy of 24,000 J. What is its
speed?
A. 1.7 m/s
B. 2.4 m/s
C. 6 m/s
D. 3 m/s
Answer:
2.4
Explanation:
48,000/8000=6
square root of 6 = 2.44948974278
so 2.4
AnswerB.2.4m/s
Explanations;
24000=1/2×8000×v^2
24000/4000=v^2
√ 6.=v
v=2.4
What is the energy conversion in a hair dryer?
A. Heat energy to electric and mechanical energy
B. Potential energy to electric and kinetic energy
C. Electric energy to heat and kinetic energy
D. Light energy to mechanical and electric energy
Answer:
C.Electrical energy to heat and kinetic energy
Waves that collide with a barrier will reflect at an angle equal to the angle of incidence.
True
False
Answer:
True
Explanation:
This is a fundamental concept in physics dealing with the nature of waves where when the waves collide with a barrier such as wall or some form of surface will reflect at an angle equal to the angle of incidence.
Calculate the orbital radii for the first six principal quantum numbers
Answer:
Explanation:
Formula for calculating radius is
r=.529A x n^2 where A=10^-10m
So put n=1,2,3,4............
An overhead projector lens is 32.0 cm from a slide (the object) and has a focal length of 30.1 cm. What is the magnification of the image? (Unit=cm) PLS HELP
Answer: M = 14.3
Explanation:
Given the following :
Object distance (u) = 32cm
Focal length (f) = 30.1 cm
Magnification = image distance (v) / object distance (u)
Recall ; 1/f = 1/u + 1/v
1/30.1 = 1/32 + 1/v
1/v = 1/30.1 - 1/32
1/v = (32 - 30.1) / 963.2
1/v = 2.1 / 963.2
1/v = 0.0021802
v = 1/0.0021802
v = 458.66666 cm
Therefore, Magnification 'M' = v / u
M = 458.66666 / 32
M = 14.333333
M = 14.3
Answer:
M = -15.8
Explanation:
object distance = 32cm
focal length = 30.1 cm
To find M we first need to find di or image distance
I will use the equation: 1/f = 1/di + 1/do
By changing the equation to 1/f - 1/di = 1/do we get 0.0019725
equation with numbers plugged in:
1/30.1 - (1/32) = 0.0019725
To change 1/do to do we divide 1 by 0.0019725
You should get 506.97
Now use the equation
M = -(di/do)
M = -(506.97/32)
You should get M = -15.8
in a car how does an airbag minimize the force acting on a person during a collision
Answer:
It increases the time it takes for the person to stop.
Explanation:
Answer:
It increases the time it takes for the person to stop.
Explanation:
hydrogen bonding is a strong attractive force. T OR F
Answer:
F
Hope it helps you!
A scientist adds different amounts of salt to 5 bottles of water. He then measures how long it takes for the water to boil. what is the dependent variable in this experiment?
A 51-kg woman runs up a vertical flight of stairs in 5.0 s. Her net upward displacement is 5.0 m. Approximately, what average power did the woman exert while she was running?
Answer:
510
Explanation:
Power= Rate of doing work i.e work done\time
=force*displacement\time
=mass*g*d\t
=51*10*5/5
=510watt
A person on a merry-go-round is constantly accelerating away from the center?
true or false
That statement is false. It's exactly the opposite direction.
In circular motion, the "centripetal" force ... and therefore the centripetal acceleration ... points TOWARD the center.
Answer:
False
Explanation:
Took The Quiz
How many ohms of resistance must be present in a circuit that has 240 volts and a current of 15 amps?
ОА.
3,600 ohms
О В.
16 ohms
230 ohms
D. 0.063 ohms
Answer:
16 ohms
Explanation:
V= I ⋅ R
where, V is the net potential difference in the circuit, I is the current in the circuit and R is the net resistance of the circuit.
In this case, V = 240 volts, I = 15 amperes.
240 = 15 ⋅ R
⇒ R = 240/ 15 = 16 ohms
Answer:
b-16ohms
Explanation:
If you are using online learning/PLATO the answer is proven to be B-16 ohms
____________ interference occurs when two waves are out of phase
[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Wave Optics.
Whenever the waves are out of phase they form a DESTRUCTIVE interference.
thus,
Destructive Interference occurs when two waves are out of phase.
Given the resistivities below, which material is best described as an insulator?
A. 4.5 22•m
B. 2.8 x 10-8
12.m
C. 1.7 x 10-8 2•m
D. 3.2 x 108 2.m
Answer: D) 3.2 × 10^8
Explanation: Insulators are best described as materials which are poor conductors of electricity and hence do not allow passage of electricity through them. Resistivity are hence used to describe property or characteristic of a material which does not allow the flow or passage of electric current.
In summary, materials which high resistivity values are referred to as Insulators. Conversely, those with low resistivity or high conductivity values are called conductors while those with intermediate values are named semiconductors.
In the question given above, the material with a resistivity value of 3.2 × 10^8 - - - has a very high resistivity value (320000000Ω), the other options given have very low resistivity values ; 0.0000000017, etc and are most likely to be conductors due to their excessively low resistivity values.
The diagram illustrates the evolution of the universe, starting from the big bang. Each concentric circle represents a stage in the evolution as stated by the big bang theory. The arrows illustrate the changes that happened after the big bang and leading up to the stage where gases were formed that later led to the formation of stars and galaxies. Choose the inaccurate statements on the diagram.
Answer: The two correct answers are Universe became more dense and universe became less transparent.
Explanation: I took the test and those are correct
The incorrect statements on the diagram universe became more dense Universe became less transparent.
What is the universe?The universe is the whole cosmic system of matter and energy. The Earth, the Sun, the Moon, the planets, and the stars along with the dust, gases, and rocks form the universe.
The big bang is the theory that explains how the universe began. It says that the universe began with just a single point. It went on expanding and stretched to grow as large as possible. It is still now expanding.
The diagram (attached) illustrates the evolution of the universe, starting from the big bang. Each concentric circle represents a stage in the evolution as stated by the big bang theory.
Thus, the inaccurate statements on the diagram universe became more dense Universe became less transparent.
Learn more about the universe.
https://brainly.com/question/9724831
#SPJ5
An airplane with a total mass of 850 kg has an engine malfunction, causing it
to provide a constant horizontal force of 4000 N. The pilot, who has a mass
of 80 kg, decides to eject from the airplane. With the reduced total mass,
what is the new approximate acceleration of the airplane?
A. 3.1 m/s2
B. 5.2 m/s2
C. 2.8 m/s2
D. 3.7 m/s2
Answer:
B
Explanation:
If the pilot, who has a mass of 80 kg, decides to eject from the airplane. With the reduced total mass,then the new approximate acceleration of the airplane will be 5.2 m/s²
What is Newton's second law?
Newton's Second Law states that The resultant force acting on an object is proportional to the rate of change of momentum.
The mathematical expression for Newton's second law is as follows
F = m*a
where F represents the force applied
m is the mass of the object
a is the acceleration of the object
The initial acceleration of an airplane with a total mass of 850 kg has an engine malfunction, causing it to provide a constant horizontal force of 4000 N.
F =m*a
4000 N = 850×a
a= 4.7 m/s²
An acceleration of airplane when the pilot, who has a mass of 80 kg, decides to eject from the airplane. With the reduced total mass,
the horizontal force is the same 4000 N, now the total reduced mass the airplane is 770 kg
F =m*a
4000 =770×a
a = 5.2 m/s²
Learn more about Newton's second law, here
brainly.com/question/13447525
#SPJ2
Referring to the above diagram, how high will the ball rise on the right-hand incline?
0 cm
7 cm
15 cm
no way to tell
a toy airplane is flying at a speed of 8 m/s with an acceleration of 0.9 m/s^2. How fast is it flying after 2 seconds? A)9.8 m/s B)8.1 m/s C)5.2 m/s D)3.6 m/s
Answer:
A) 9.8m/s this answer is correct.
The acceleration is increasing by 0.9m/s^2 .
so, in each second it will increase by 0.9m/s^2.
Therefore, in 2 second
0.9 * 2
= 1.8m/s
Now,
8 + 1.8
= 9.8m/s
The general kinematic equations of motion for vertical displacement can also be simplified significantly. Write the simplified
equation for y in this case. Explain how you have been able to simplify it from this general displacement equation:
Answer:
Δy = v₀t + (1/2)gt²
where g = 9.81 m/s if the body is moving downwards and g = -9.81 m/s if the body is moving upwards
Explanation:
The general kinematic equation for horizontal displacement is gives as:
Δx = v₀t + (1/2)at²
Where
Δx = change in the x direction
v₀ = initial velocity
t = time
a = acceleration
If the body is vertically instead of horizontally, Δx is changed to Δy
Δy = v₀t + (1/2)at²
For a vertical moving body, the acceleration it experiences is the gravitational accerelation of the earth 'g'
So the equation becomes:
Δy = v₀t + (1/2)gt²
where g = 9.81 m/s if the body is moving downwards and g = -9.81 m/s if the body is moving upwards
The general kinematic equations of motion for vertical displacement is written as [tex]h = v_0_yt - \frac{1}{2} gt^2[/tex].
The general kinematic equations of motion for vertical displacement is written as follows;
[tex]h = v_0_yt - \frac{1}{2} gt^2[/tex]
where;
h is the vertical displacement of the object[tex]v_0_y[/tex] is the initial vertical velocity of the objectg is the acceleration due to gravityt is the time of motion of the objectThus, the general kinematic equations of motion for vertical displacement is written as [tex]h = v_0_yt - \frac{1}{2} gt^2[/tex].
Learn more about vertical displacement here: https://brainly.com/question/2289543
an inclined plane makes work easier by increasing the distance and decreasing the____.
Answer:
force
Explanation:
Answer:
force
Explanation:
You push a cart with mass 15 kg forward , giving it an acceleration of 3 m/s ^ 2 . How much force did you apply ? O A. 0.2N O B. O 18N O D. 45 N
Answer: force = mass x accelegation
Explanation: 15x3 = 45 N
Answer:
A
Explanation:
In which of the following situations or places would you want to reduce the
force of friction?
I A. Skiing down a hill during a race.
B. Walking down a steep hill.
C. Sitting in the bed of a pickup truck while it turns a corner
D. In the axle of the wheels while you ride your bicycle.
Answer:
D
Explanation:
The correct answer would be in the axle of the wheels while you ride your bicycle.
Options A, B, and C requires that the forces of friction is increased in order to have more control.
However, option D requires that there is a minimal frictional force in the axle of the wheels of a bicycle while riding so that a little effort would be required to keep the bicycle moving.
The lesser the friction, the lower the effort that would be needed to keep the bicycle moving and vice versa.