Explanation:
The purpose of this seven-page lab report is to use simple and fractional distillation to purify volatile liquids. The boiling points were obtained from the distillate collected drops and the efficiency of the two methods of purification were compared. The introduction experiment, data, conclusion
What is a magnet?(2 points)
O A tool used to help determine if certain materials are magnetic
O A tool used to help determine if certain materials have a large mass
O A tool used to help determine if materials are the color blue
O A tool used to help determine if materials use the force of gravity
What is one element that is not found in the human body, air, or the universe ?
Explanation:
For the moment we have analyzed the physical point of view. For many, the most common way to analyze your body is through the chemical elements.
This increases the number of building blocks to more than four particles, but considering that the number of atoms in a 70 kilogram body is 7,000 quadrillion (you write a 7 followed by 27 zeros), it is still quite simple that we can count the 99.95% of your body weight with only seven elements.
The provocative alternative theories to the Big Bang that state that the universe has no limits
You may have heard that most of our body is water. It may seem unlikely given how solid our bodies feel, but most of you are made of cells filled with water.
There is enough structure that you are unlikely to slide down the drain, but you do have a lot of water. About 60 percent of your body is water, even your bones are roughly 30% water.
Two skeletons sitting on the beach.
IMAGE SOURCE, GETTY IMAGES
Caption,
The bones have 30% water in their composition.
Knowing that water is made up of hydrogen and oxygen (H2O), it seems clear to point out that the elements most present in the body are hydrogen and oxygen.
But there is also much of the most versatile of atoms, carbon. All life we know incorporates water and is based on carbon structures.
Since carbon atoms weigh 12 times more than hydrogen atoms, carbon ranks second by weight behind oxygen.
The thing would be like this: we have 65% oxygen, 18% carbon and 10.2% hydrogen.
If we add a small amount of nitrogen (3.1%), a pinch of calcium for those bones (1.6%), 1.2% of phosphorus, 0.25% of potassium and sulfur and smaller percentages of sodium, magnesium and chlorine, we already reached 99.95
Pcl3+H2O=H3PO3+Hcl=?
Answer:
PCl3 + 3H2O → HPO(OH)2 + 3HCl. Phosphorus(III) chloride react with water to produce phosphorous acid and hydrogen chloride.
Explanation:
Answer:
the answer is stop studying,enjoy your life,party all night,bite like a dog and purr like a cat thats it
Explanation:
i dunno
why does glucose more soluble in water comparing to benzoic acid?
Answer:
Because it desolves in water very well
Solution X is saturated at 40 g per 100 g of water. If 45 g of X is
dissolved in 150 g of water, will the solution be saturated,
unsaturated, or supersaturated?
Answer:
unsaturated
Explanation:
Consider this reaction: HCO3− + H2S → H2CO3 + HS− Which is the Bronsted-Lowry base? H2S HCO3- HS– H2CO3
Answer:
hco3
Explanation: bc i said so
The force needed to overcome the attraction among molecules at the surface of a liquid is called?
Answer:
The type of force is known as cohesive force
PLEASE PLEASE PLEASE HELP ME
*URGENT*
Pls hurry!
BEST ANSWER GETS BRAINLIEST!
Instructions
Balance each equation.Be sure to show off your lists! Remember you cannot add or place off coefficients in the middle of a chemical formula.
Example
2Na + MgF2 —-> 2NaF + 2Mg
Na= 2. Na=2
Mg= 1. Mg=1
F= 2. F=2
3. Cl₂ + 2KI --> 2KCl + I₂
Cl = 2 Cl = 2
K = 2 K = 2
I = 2 I = 2
4. 2NaCl --> 2Na + Cl₂
Na = 2 Na = 2
Cl = 2 Cl = 2
5. 4Na + O₂ --> 2Na₂O
Na = 4 Na = 4
O = 2 O = 2
6. 2Na + 2HCl --> H₂ + 2NaCl
Na = 2 Na = 2
H = 2 H = 2
Cl = 2 Cl = 2
7. 2K + Cl₂ --> 2KCl
K = 2 K = 2
Cl = 2 Cl = 2
Which binary molecular compound includes an element with five atoms of one element?
Answer:
For example, N2O4 is referred to as dinitrogen tetroxide, not dinitrogen tetraoxide, and CO is called carbon monoxide, not carbon monooxide.
...
Binary molecular (covalent) compounds.
Prefixes used in chemical nomenclature
prefix number of atoms
tetra- 4
penta- 5
hexa- 6
Explanation:
PLEASE HELPPPP!!!!
WILL MARK BRAINLEST!!!
Answer:
90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love you
Boiling water at sea level is hotter than boiling water in the
mountains.
1. Molecules are held together by:
a, ionic bonds
b. covalent bonds
c. both a and b
A: ionic bond, you know why becasue it is
K + Br2 → KBr
Identify a covalently bonded molecule in the reaction above that is a
REACTANT.
Answer: A covalently bonded molecule in the reaction
[tex]K + Br_{2} \rightarrow KBr[/tex] is [tex]Br_{2}[/tex].
Explanation:
A bond formed by sharing of electrons between two or atoms is called a covalent bond.
For example, bromine is a group 17 element and it has 7 valence electrons. It needs one more electron to complete its octet.
So, when one bromine atom chemically combines with another bromine atom then sharing of electrons takes place which leads to the formation of [tex]Br_{2}[/tex] molecule.
Hence, in the equation [tex]K + Br_{2} \rightarrow KBr[/tex]; [tex]Br_{2}[/tex] reactant is a covalently bonded molecule. A covlent bond is formed by two or more non-metal atoms that chemically combine together.
In a chemical equation, reactants are written on the left side and products are written on right side.
Thus, we can conclude that a covalently bonded molecule in the reaction
[tex]K + Br_{2} \rightarrow KBr[/tex] is [tex]Br_{2}[/tex].
how much 0.100 m h2so4 are needed to make 25.0 ml of 0.00500 m solution
Answer:
3) 1.25
Explanation:
I had the same question and somehow got it right :)
The new volume will be determined by molarity and which will be 1.25 ml.
What is volume?The volume of an object is just a measurement of how much space it takes up.
What is Molarity?
The molality refers to the moles of a solute in relation to the mass of the solvent, whereas the molarity refers to the moles of a solute in based on the volume of the solution. It can be denoted by M.
The formula of Molarity is
[tex]M_{1} V_{1} =M_{2}V_{2}[/tex]
where, M is molarity and V is volume.
Calculation of volume.
It is given that,[tex]M_{1} = 0.1 M, M_{2} =0.0025 M.[/tex]
Now, puts the value of given data in molarity equation.
[tex]M_{1} V_{1} = M_{2} V_{2}[/tex]
[tex]V_{1} = M_{2} V_{2} /M_{1}[/tex]
[tex]V_{1}[/tex] = 0.005×25/0.1 = 1.25 ml
Therefore, the correct answer will be option 3.
To know more about molarity and volume click here.
https://brainly.com/question/20366625.
#SPJ2
Substances that are physical combinations of two or more different types of matter are known as
Answer:
A mixture!
Explanation:
Mixtures are a substance made of combining two or more different kinds of matter :)
Hope this helped!
How could renewable energy sources be used to heat and cool a house?
Find the number of grams of calcium chloride needed to prepare 500.0ml of a 4.0m solution
Answer:
222 g
Explanation:
First we convert 500.0 mL to L:
500.0 mL / 1000 = 0.500 LThen we use the definition of molarity to calculate how many calcium chloride moles are required:
Molarity = moles / litersMolarity * liters = moles4.0 M * 0.500 L = 2.00 molNow we convert 2.00 moles of calcium chloride into grams, using its molar mass:
2.00 mol * 111 g/mol = 222 gA gas occupies 40.0 mL at 150 K. What volume does it occupy at 300 K,
assuming pressure is constant? *
Answer:
.08 L or 80 ml
Explanation:
Use the equation V/t = V/t.
.04L / 150K = V / 300K
.04 / 150 * 300 = V
.08 L or 80 ml
Aluminum chloride, AlCl3, is an inexpensive reagent used in many industrial processes. It is made by treating scrap aluminum with chlorine according to the following equation. Please balance the equation.
__2_ Al (s) + 3___ Cl2(g) _2___ AlCl3(s)
If you start with 3.11 g of Al and 5.32 g of Cl2, which reagent is limiting? How many grams of AlCl3 can be produced? During an experiment you obtained 5.57 g of AlCl3, what was your percent yield?
Answer:
Cl₂ the limiting reactant.
6.67g of AlCl₃ can be produced.
83.5% is percent yield
Explanation:
Based on the reaction:
2 Al + 3Cl₂ → 2AlCl₃
2 moles of aluminium react with 3 moles of chlorine.
To solve this question we must find the moles of each reactant in order to find limiting reactant. With limiting reactant we can find theoretical yield. Percent yield is:
Actual yield (5.57g) / Theoretical yield * 100
That means if we find theoretical yield we can find percent yield:
Moles Aluminium: 26.98g/mol
3.11g * (1mol / 26.98g) = 0.115 moles Al
Moles Chlorine: 70.90g/mol
5.32g * (1mol / 70.90g) = 0.075 moles Cl₂
For a complete reaction of 0.075 moles of Cl₂ are required:
0.075 moles Cl₂ * (2mol Al / 3mol Cl₂) = 0.050 moles of Al
As there are 0.115 moles of Al, Aluminium is the excess reactant and Cl₂ the limiting reactant.
Moles AlCl₃ and mass: 133.34g/mol
0.075 moles Cl₂ * (2mol AlCl₃ / 3mol Cl₂) = 0.050 moles of AlCl₃
0.050 moles of AlCl₃ * (133.34g / mol) =
6.67g of AlCl₃ can be producedPercent yield:
5.57g / 6.67g * 100 =
83.5% is percent yieldExplain why the CO2 from your breath had the effect on the pH of water that it did. Explain any anomalies in your experiment.
Explanation:
As atmospheric CO2 levels increase due to anthropogenic causes, dissolved CO2 also increases, which in turn decreases the pH of water. When water becomes saturated with CO2, it not only reduces the ocean's pH, but depletes the calcium carbonate sources as well ³⁵
NaOH dissociation equation
Answer:
This can be represented by the chemical equation: NaOH H2O→ OH- + Na.
Complete the following reaction.
14N+ on →?C+1H
18C
14
1 C
18C
Answer: The complete reaction is as follows.
[tex]^{14}_{7}N + ^{1}_{0}n \rightarrow ^{14}_{6}C + ^{1}_{1}H[/tex]
Explanation:
When nucleus of two or more atoms are bombarded together then it leads to the formation of new particles with new identity. This type of reaction are called nuclear reaction.
For example, [tex]^{14}_{7}N + ^{1}_{0}n \rightarrow ?C + ^{1}_{1}H[/tex]
Here, nitrogen atom when bombarded with a neutron then it is forming hydrogen and a carbon atom.
As total atomic mass on reactant side is (14 + 1) = 15
So, the atomic mass of carbon formed on product side is (15 - 1) = 14.
The number of protons holded by this carbon atom is (7 - 1) = 6.
Therefore, we can conclude that the complete reaction is as follows.
[tex]^{14}_{7}N + ^{1}_{0}n \rightarrow ^{14}_{6}C + ^{1}_{1}H[/tex]
How many structural isomers does C5H12 have?
a. two
b. three
c. one
d. five
Answer:
three structural isomers
Pentane (C5H12) is an organic compound with five carbon atoms. Pentane has three structural isomers that are n-pentane, Iso-pentane (methyl butane) and neopentane (dimethylpropane).
Would a burning candle have potential or kinetic energy?
Answer:
When the candle is lit and burning, it has kinetic energy.
Explanation:
please smash brainliest on my doorstep
draw the structure of ethoxyethane
Answer:
i couldnt draw it but here is a picture
Explanation:
Deduce the differences that exist in the reaction represented by the diagrams. anyone??
Answer:
The one on the left has more products than reactants and is endothermic
The one on the right has more reactants than products and is exothermic
Explanation:
Endothermic: Energy is absorbed
Exothermic: Energy is released
What is the pH of a .00034 M of HCl solution?
3.5
5.3
3.0
5.0
Answer:
pH = 3.5
Explanation:
HCl is a strong acid, so we can use this little formula to find the pH of the solution:
pH = -log[H3O+]
(where H3O+ is the strong acid, HCl)
So we just plug in the molarity for the concentration of the acid...
pH = -log(0.00034)
Solve.
pH = 3.468521083
And apply sig. figs....
pH = 3.5
Two ways that salinity can increase
Which property typically indicates strong intermolecular forces are present in a liquid? A) low heat of vaporization B) low critical temperature C) low vapor pressure D) low boiling point E) low melting point
Answer:
C) low vapor pressure
Explanation:
Vapor pressure refers to the pressure created by the vapor produced at a given temperature in a closed container. The pressure created as a result of the production of vapor above the liquid in a closed container. Vapor pressure works as the result of the force of the intermolecular force. When a liquid does evaporates easily it exemplifies that it has low vapor pressure. When the liquid evaporates easily and quickly, it exemplifies that it has high vapor pressure.
Statement that express the property of intermolecular forces that is been exhibited by liquid is C: low vapor pressure.
Intermolecular forces can be regarded as forces that is found between molecules. One of the property of this intermolecular forces can be seen in liquid which low vapour pressure.Vapour pressure is used in knowing the liquid to change into the gaseous state, it is at that point that liquid will reach i.e equilibrium pressure when in closed container.
Therefore, option C is correct.
Learn more
https://brainly.com/question/2693029?referrer=searchResults
Please help me. Question is post on photo.
Answer:
London Dispersion Only
Explanation:
BF3 is non polar and nonpolar molecules only have london disperion forces