Answers
Answer:
Be: Helium--------Loses-------4--------Be2+
B: Helium--------Loses--------5--------B5
N: Helium--------Gain---------7--------N3−
O: Lithium---------Gain--------8-------O2−
F: Neon--------electrically neutral-------9---------F-
Explanation:
Hope this helps:)
Related Questions
what does MA 2 means?
Answers
Answer:
Master-at-Arms Petty Officer 2nd Class. MA2. Machine Accountant Second Class (Naval Rating) Copyright 1988-2018 AcronymFinder.com, All rights reserved.
Explanation:
How is the nuclear structure of an atom similar to the non-nuclear structure?
Answers
Answer:
It has shells of protons and neutrons.
Explanation:
The nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
What is an atom?An atom consists of a central nucleus that is usually surrounded by one or more electrons.
The total number of neutrons plus protons in the same both before and after the nuclear process, although the total number of protons and the total number of neutrons may be different before and after.
Hence, the nuclear structure of an atom is similar to the non-nuclear structure because has shells of protons and neutrons.
Learn more about the atoms here:
https://brainly.com/question/1566330
#SPJ2
example of physical property
Answers
Answer:
Color. I thinkkk.
Phyiscal properties are defined as properties that can be measured or observed without changing the chemical nature of the substance.
Some examples of phsyical properties are:
- Color
- Density
- Volume
- Mass
- Boiling or Melting Points
The number of shovels and cost per 1000 kg for
Ca(OH)2
Answers
Answer:500
Explanation:
NEEEDDDD HELP ASAP PLZ PLZ PLZ PLZ PLZ HELP ME
Answers
Answer:
[tex]ns^2[/tex]
Explanation:
How much heat is required to melt 42.0 grams of water at 0*C?
Hurry...
Answers
Answer:
Heat required to melt 42 g if ice is 13,860 J
Explanation:
The amount of heat required to melt grams of water at 0°C is given as follows;
The mass of the ice (water), m = 42 g
The latent heat of fusion of ice Δ[tex]H_f[/tex]= 330 J/g
Therefore, heat required to melt 42 grams is given as follows;
Heat required to melt ice = Mass of the ice, m × The specific latent heat of fusion of the ice, Δ[tex]H_f[/tex]
Heat required to melt 42 g if ice = m × Δ[tex]H_f[/tex] = 42 g × 330 J/g = 13,860 J
Heat required to melt 42 g if ice = 13,860 J.
When the first periodic table of the elements was published, the elements were arranged by atomic mass. Although
several elements seemed out of order, later discoveries showed the order to be correct.
Which event most likely helped the development of the periodic table?
O Scientists changed the atomic masses to better fit the pattern.
O Scientists refused to consider other ways to organize the elements.
O New technology was developed that modified the masses.
O New information changed the understanding of the atom's structure.
ANSWER ASAP
Answers
Is this correct?
If the temperature is below the melting point the substance is a solid
If the temperature is above the boiling point the substance is a gas
If the temperature is in between the boiling and melting points the substances a liquid.
Answers
If the normal melting point of a substance is below room temperature, the substance is a liquid at room temperature.
If both the normal melting point and the normal boiling point are above room temperature, the substance is a solid.
Which of the following suggests a chemical change took place? *
A.The substance is smaller than it was before the change took place.
B.A new substance has formed.
C.The substance looks the same as it did before the change took place.
D.The substance has been shaken up.
Answers
Answer:
A
Explanation:
Because it got smaller so that mean it had a chemical reaction
Which is the best way to determine if an object is made of pure silver?
O Determine the solubility of the object.
O Test to see if the object is chemically reactive.
Determine the density of the object and compare the known density of pure silver.
O Compare the mass of the silver object to the mass of a piece of pure silver.
Answers
Answer:
The correct option is;
Determine the density of the object and compare the known density of pure Silver
Explanation:
The density of the object is found by finding the weight of the object, and then finding the volume (of water) the object displaces when it is immersed (in water)
The density is then fond by dividing the weighed mass by the volume the object displaces when immersed
Compare the result of the measured density with that of pure silver. If the two have density, as well as other similar physical characteristics, then the object is likely to be pure silver.
hello nice ppl(ɔ◔‿◔)ɔ ♥
Answers
Answer:
Hi
Explanation:
How has your brainly experience been so far? Are you liking?
Answer:
Thx you are sooo noice
Explanation:
UwU U3U
A brief explanation to this question: "Why are neon signs/fireworks different colors? Please help me. Do not look up internet
Answers
Answer:
when lit, the atoms of different chemical compounds inside the firework absorb energy, when the electrons fall back to lower energy levels, they give off colored light. Depending upon the chemical used, different colors are produced. neon lights or signs are glass tubes filled with neon gas. When the light is plugged in, the electrical energy causes the electrons of neon to jump to higher energy levels, when they go to lower levels, colored light is given off. The neat thing is that the neon never gets used up. The only thing that gets used up is the electricity. The electrons don't get destroyed and can be used over and over again jumping levels. Neon glows with an orange light, but you know that neon signs can be lots of different colors. The variations come when different gases other than neon are used such as argon, or krypton or when the tube is painted so that with the light produced it produces a certain color.
Explanation:
After being excited by high levels of electrical energy (as in neon signs) or heat energy, various elements and molecules will emit their own specific colors of light.
What are basis behind fireworks?Metals burn in a variety of colors. When a copper compound is lit, for example, the flame is blue-green.
Calcium burns red, while potassium burns purple. Metals are combined to produce various colors in fireworks.
The appearance of each firework is determined by the type of stars it contains, as well as the size and quantity of these pellets.
Some stars contain metal salts, which produce brilliant colors, while others contain a variety of chemical compounds that produce dazzling light effects such as strobing, sparkling, and others.
Various elements and molecules will emit their own specific colors of light after being excited by high levels of electrical energy (as in neon signs) or heat energy (as in the fireworks).
Thus, the neon signs or fireworks provide different colors.
For more details regarding fireworks, visit:
https://brainly.com/question/16737516
#SPJ2
There are seven petals on that flower.
O
qualitative
quantitative
Answers
This time the answer is quantitive because the mentions numbers
Hope this helps!
Does changing the number of neutrons affect the atomic number?
Answers
Answer:
awsdxcvawsd
Explanation:
Answer:If you change the number of neutrons in an atom, you get an isotope of the same element. The addition of a neutron can make an atom radioactive. When you change the number of protons in an atom, you will change the atom from one element to a different element.
Explanation:
Jakasia needed to find the volume of a plastic container in L to see if the 170 L of
solution that she had would fit inside. She knew that one side was 2.5 ft, the
height of the box was 60 cm, and width of the box was 0.8 m. Use dimensional
analysis to determine if Jakasia's solution will fit in the container.
Answers
Answer:
The solution will fit into the container.
Explanation:
The following data were obtained from the question'
Volume of solution = 170 L
Length of container (L) = 2.5 ft
Height of container (H) = 60 cm
Width of container (W) = 0.8 m
Volume of container (V) =?
Next, we shall express the length, height and breadth I the same unit of measurement. In this case, we shall all in centimetres (cm).
For the length:
1 ft = 30.48 cm
Therefore,
2.5 ft = 2.5 ft × 30.48 cm / 1 ft
2.5 ft = 76.2 cm
Thus the length is 76.2 cm
For the width:
1 m = 100 cm
Therefore,
0.8 m = 0.8 m × 100 cm / 1 m
0.8 m = 80 cm
Thus, the width of the container is 80 cm.
Next, we shall determine the volume of the container as follow:
ength of container (L) = 76. 2 cm
Height of container (H) = 60 cm
Width of container (W) = 80 cm
Volume of container (V) =?
Volume = length × width × height
Volume = 76.2 × 80 × 60
Volume = 365760 cm³
Finally, we shall convert 365760 cm³ to litre (L). This can be obtained as follow:
1000 cm³ = 1 L
Therefore,
365760 cm³ = 365760 cm³ × 1 L/ 1000 cm³
365760 cm³ = 365.76 L
Therefore, the volume of the container is 365.76 L
Since the volume of the container (i.e 365.76 L) is bigger than the volume of the solution (i.e 170 L), therefore, the solution will fit into the container.
Plz help! The best answer will be marked as brainliest!
Make a funny sentence for the beneficial or great uses of magnesium
Here is an example for Mercury, it HAS to for Magnesium
¨I have a long history of use in fluorescent lighting so I can light up any room ¨
Answers
I heard Magnesium and Oxygen were going out.
So I was like, "OMg!"
Arrange the following elements in order of increasing ionization energy
Picture of elements included.
Answers
Ionization Trend: First ionization energy will increase left to right across a period and increase bottom to top of a family (column).
A) Sr, Be, Mg are all in column 2 of the periodic table. Based on the first ionization rule above, from increasing to decreasing energy, the order is: Be, Mg, Sr
B) Bi, Cs, Ba are all in the same row of the periodic table. Based on the first ionization rule above, from increasing to decreasing energy, the order is: Bi, Ba, Cs
C) Same rule as above. Order is: Na, Al, S
The elements in increasing order of ionization energy will be:
a) Be, Mg, Sr
b) Bi, Ba, Cs
c) Na, Al, S
Ionization energy trend:Ionization Trend: First ionization energy will increase left to right across a period and decrease bottom to top of a family (column).
A) Sr, Be, Mg are all in column 2 of the periodic table. Based on the first ionization rule above, from increasing to decreasing energy, the order is: Be, Mg, Sr
B) Bi, Cs, Ba are all in the same row of the periodic table. Based on the first ionization rule above, from increasing to decreasing energy, the order is: Bi, Ba, Cs
C) Similarly, Order is: Na, Al, S
Find more information about Ionization energy here:
brainly.com/question/1445179
how do i know if they are congruent
Answers
Which type of reaction has the general formula of AB + CD→ AD + CB
Answers
Answer:
Double replacement reactions
Explanation:
CD are two reactant compounds, while AB and CB are two product compounds that results from the reaction, in this type of reaction B and D change places
Phenolphthalein turns litmus paper what color?
Answers
Litmus paper and Phenolphthalein are both indicators. This means they will change colour in the presence of an acid or a base.
Litmus paper turns blue in a base and remains red when it is in contact with an acid or neutral solution. Phenolphthalein turns pink in a base, but is coluorless in an acid or neutral solution.
In a sample of 400 lithium atoms, it is found that 30 atoms are lithium-6 (6.015 amu) and
370 atoms are lithium-7 (7.016 amu). What is the average atomic mass?
Answers
Answer:
667.3
Explanation:
how long does it take to find out that you just want to stuff your face in chocolate
Answers
Answer:
no to long
Explanation:
thanks for the points
1. A charged group of covalently bonded atoms is known as
Answers
Quais são os três tipos de tecidos musculares? E)celulas,estriado esqueletico, estriado liso. B)esttiadi esqueletico, liso, estriado cardiaco c)estriado liso, estriado esqueletico, estriado cardíaco. D)liso, celulas, esteiado cardíaco. ESSA PERGUNTA E DE CIENCIAS MAS NAO TEM VIENCIAS ALI PRA ESCOLHER;-;.
Answers
Answer:
c)estriado liso, estriado esqueletico, estriado cardíac
Explanation:
Los 3 tipos de tejido muscular filho cardíaco, liso y esquelético.
O músculo esquelético é responsável pelo movimento dos tons e das outras estruturas. La contracción del músculo cardíaco permite que o corazón bombee sangre. Los músculos lisos permitem que os alimentos se muevan a través del tracto digestivo y también ayudan al cuerpo a absorvedor los nutrientes.
10.0 J of energy is required to increase the temperature of 1 g of water by 10oC. What is this value in calories? In kcal?
Answers
10 J = 2.39 cal = 2.39 x 10⁻³ kcal
Further explanationThe joule is one unit of energy. energy itself can be expressed in units such as calories, BTU, kg⋅m²s⁻²
An example of energy calculation is the calculation of heat in heat transfer
Heat can be calculated using the formula:
Q = mc∆T
Q = heat, J
m = mass, g
c = specific heat, joules / g ° C
∆T = temperature difference, ° C / K
10 J if we convert into calories and kcal
[tex]\tt 1~J= 0.239~cal\\\\10~J=2.39~cal\\\\2.39~cal=2.39\times 10^{-3}~kcal[/tex]
Analyzing a blood sample usually involves which type of separation method?
screening
distillation
centrifugation
filtration
Answers
Answer:
the answer is b
Explanation:
i just did quizz
Which of the following is a mineral?
coal
ling
glass
brick
salt
Answers
11. How many moles are in 7.14 X 10 35
molecules of 02?
Answers
Answer:
The answer is 1.186 × 10¹² molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
From the question
N = 7.14 × 10^35 molecules of O2
We have
[tex]n = \frac{7.14 \times {10}^{35} }{6.02 \times {10}^{23} } \\ [/tex]
We have the final answer as
1.186 × 10¹² molesHope this helps you
A skittish squirrel is climbing vertically on a tree. Its
motion is shown on the following graph of vertical
position y vs. time t.
6
5+
3
2+
1
→t(s)
2
3
4
5
6
7
8
9
What is the instantaneous speed of the squirrel at time
t=2 s?
Answers
Answer: 1
Explanation:
Answer:
-0.1
Explanation:
What is the relationship between ionization energy and
electronegativity based on these cards?
Answers
Answer: here u go
Explanation:
The ionization energy can be thought of as a kind of counter property to electronegativity in the sense that a low ionization energy implies that an element readily gives electrons to a reaction, while a high electronegativity implies that an element strongly seeks to take electrons in a reaction.
Answer: Ionization energy is the energy required to remove an electron from a neutral atom in its gaseous phase.
Explanation: Conceptually, ionization energy is the opposite of electronegativity. The lower this energy is, the more readily the atom becomes a cation.