help plzzzzzzzzzzzzzzzzz​

Answer:

0.963158 maybe just put 0.96

Explanation:

732mmhg to atm is 0.963158 i looket it up sorry if I am wrong

The probability density function is nonnegative everywhere, and its integral over the entire space is equal to the terms "probability distribution function" and "probability function" .

In probability theory, a probability density function (PDF), or density of a continuous random variable, is a function whose value at any given sample (or point) in the sample space (the set of possible values taken by the random variable) can be interpreted as providing a relative likelihood that the value of the random variable would be equal to that sample.

Probability density is the probability per unit length, in other words, while the absolute likelihood for a continuous random variable to take on any particular value is 0 (since there is an infinite set of possible values to begin with), the value of the PDF at two different samples can be used to infer, in any particular draw of the random variable, how much more likely it is that the random variable would be close to one sample compared to the other sample.

Learn more about probability density function,here:

https://brainly.com/question/30403935

#SPJ2

Answer: Neutral Xe atom

Answer:

1050-452 = 598, the liquid is more than the ammonium chloride so it is the majority

Answer:

Combustion

Explanation:

An exothermic reaction is defined as a reaction that releases heat and has a net negative standard enthalpy change. Examples include any combustion process, rusting of iron, and freezing of water.

Combustion is a type of exothermic chemical reaction that generates light and heat in most cases, and occurs fairly quickly.

An exothermic reaction is one that when it occurs releases energy in the form of heat or light to the environment.

Therefore, we can conclude that combustion is an example of an exothermic reaction that releases large amounts of heat, which can lead to fire.

Learn more about an exothermic reaction here: https://brainly.com/question/14969584

The molarity of the NaOH solution is 0.03 M

We'll begin by calculating the mole of the KHP

Mole = mass /molar mass

Mole of KHP = 0.212 / 204.22

Mole of KHP = 0.001 mole

Next, we shall determine the molarity of the KHP solution

Molarity = mole / Volume

Molarity of KHP = 0.001 / 0.05

Molarity of KHP = 0.02 M

Finally , we shall determine the molarity of the NaOH solution

KHP + NaOH —> NaPK + H₂O

From the balanced equation above,

From the question given above, the following data were obtained:

MaVa / MbVb = nA / nB

(0.02 × 50) / (Mb × 35) = 1

1 / (Mb × 35) = 1

Cross multiply

Mb × 35 = 1

Divide both side by 35

Mb = 1 / 35

Mb = 0.03 M

Thus, the molarity of the NaOH solution is 0.03 M

Complete question:

See attached photo

Learn more about titration: https://brainly.com/question/25866669

Answer:

Cu(OH)₂

Explanation:

Hope that helps

Answer: The chemical formula is Cu(OH)₂

Answer:

The soda or the egg?

Explanation:

The soda will gain but the egg will lose it may take a while though

Answer:

Gains Weight UwU

Explanation:

The Coriolis Effect (Core-nol-e-us)

Answer:

109.5°

Explanation:

Pls Cross Check It, If It Correct

Answer:

The answer is letter D. 0./75 mol

Explanation:

Explanation: It's a 3.0 M solution so 1 litre of solution contains 3 moles of NaOH. 250 ml of solution therefore contains 0.25 x 3 = 0.75 moles of NaOH.

Answer: false

Explanation:

f this helps typically an element wont have a 2 next to it, to see if something is an element or compound check for the element on the periodic table and see if the structure or name matches the one given to you on the question. for example here it is Co2 on the periodic table it's simply written as Co

co2 or carbon dioxide is a  compound not an element, you can even check this on the periodic table

Answer:

true

Explanation:

co2 is carbon dioxide

Hope this helps.

Answer:

mole

Explanation:

Since Sodium Chloride is ionic, it cannot be considered a molecule as per the definition of a molecule requires each of its components to be bonded together.

The formula mass of a compound is the mass of its one molecule. Since molecule is the basic unit of a compound. Thus, the relative formula mass in grams is the mass of one molecule.

Sodium fluoride is an ionic compound formed by the combination of sodium and fluorine by loss of one electron from sodium to fluorine. The  formula mass of fluorine is calculated from the atomic masses of sodium and fluorine.

Atomic mass of fluorine is 19 g/mol and mass of sodium is 23 g/mol. Here only one sodium and one fluorine is present. Hence the formula mass is 23+ 19 = 42.

This is the mass of one unit of NaF. Thus mass of one sodium fluoride molecule. Where as its molar mass may differ from the formula mass. Since the molar mass is the mass of one mole of the compound NaF. One mole of compound contains 6.02 × 10²³ molecules.

To refer more on formula mass, find the link:

https://brainly.com/question/28647347

#SPJ2

The emf of the cell as written is calculated to be  0.014 V.

Using the Nernst equation;

Ecell = E°cell - 0.0592/n log Q

We must note that  E°cell = 0 because the anode and cathode are composed of the same type of metal.

Now;

Substituting values, we have;

Ecell = 0 -  0.0592/3 log (0.50 M)/(0.10 M)

Ecell = 0.014 V

Learn more: https://brainly.com/question/15394851

Answer:

cardiac muscle

Explanation:

because they help the heart to pump blood to all parts of the body

Answer:

Muscle is also very important to everyone because we need our muscles to survive. The HEART is the strongest muscle in our body and is always looking to get stronger. Muscles enable us to be active and exercise. Our strength comes for our muscles and how much they are used.

Explanation:

By decomposing 157g of NaCl, approximately 1.35 moles of chlorine can be produced.

To determine the number of moles of chlorine that could be produced by decomposing 157g of NaCl, we need to use the molar mass of NaCl and apply stoichiometry.

The molar mass of NaCl is the sum of the atomic masses of sodium (Na) and chlorine (Cl), which is approximately 22.99 g/mol + 35.45 g/mol = 58.44 g/mol.

Now, we can calculate the number of moles of NaCl:

Moles of NaCl = Mass of NaCl / Molar mass of NaCl

Moles of NaCl = 157 g / 58.44 g/mol

Moles of NaCl ≈ 2.69 mol

According to the balanced equation 2NaCl → 2Na + Cl₂, we can see that for every 2 moles of NaCl, we produce 1 mole of Cl₂.

Therefore, using the stoichiometric ratio, we can calculate the number of moles of chlorine produced:

Moles of Cl₂ = (Moles of NaCl / 2) × 1

Moles of Cl₂ = 2.69 mol / 2

Moles of Cl₂ ≈ 1.35 mol

Thus, by decomposing 157g of NaCl, approximately 1.35 moles of chlorine can be produced.

Learn more about chlorine from the link given below.

https://brainly.com/question/19460448

#SPJ2

Answer:

your question is not very clear but I think the answer is either

Primary (non-rechargeable)

Secondary (rechargeable) or

Lithium-ion battery.

Rechargeable li-ion button cell.

Answer:

b

Explanation:

Answer:

option D 17proton ,17electron and 18 neutrons

Answer:

Thermosphere

Explanation:

More specifically the ionosphere, since the ionosphere is the lower part of the thermosphere.

Hope this helps!

Explanation:

brain and heart froce acts between two chloramine

Answer:

Dispersion, Hydrogen-bonding, and Dipole forces act between two chloramine (NH2CI) molecules.

Explanation:

Dispersion is exerted between all molecules. Chloramine is polar, therefore dipole forces are present. The molecular geometry of chloramine (NH2Cl) is a trigonal pyramidal, therefore hydrogen-bonding forces are present.

Answer:

Erosion.

Explanation:

It can be as small as a grain of sand or as large as a boulder. Sediment moves from one place to another through the process of erosion. Erosion is the removal and transportation of rock or soil. Erosion can move sediment through water, ice, or wind.

If It takes 60mL of 0.20M of sodium hydroxide (NaOH) to neutralize 25 mL of carbonic acid ([tex]H_2CO_3[/tex]), then the concentration of the carbonic acid is 0.24M

The reaction between NaOH solution and [tex]H_2CO_3[/tex] is written below

[tex]2NaOH + H_2CO_3 \rightarrow Na_2CO_3 + 2H_2O[/tex]

Volume of NaOH, [tex]V_B[/tex] = 60 ml

Volume of [tex]H_2CO_3[/tex], [tex]V_A=25 ml[/tex]

Molarity of [tex]H_2CO_3[/tex], [tex]C_A=?[/tex]

Molarity of NaOH, [tex]C_B=0.20M[/tex]

Number of moles of [tex]H_2CO_3[/tex], [tex]n_A=1[/tex]

Number of moles of NaOH, [tex]n_B=2[/tex]

The mathematical equation for neutralization reaction is:

[tex]\frac{C_AV_A}{C_BV_B} =\frac{n_A}{n_B}[/tex]

Substitute  [tex]C_B=0.2 M[/tex],  [tex]n_A=1[/tex],  [tex]n_B=2[/tex],  [tex]V_B[/tex] = 60ml, and  [tex]V_A=25 ml[/tex] into the equation above in order to solve for [tex]C_A[/tex]

[tex]\frac{C_A \times 25}{0.2 \times 60}=\frac{1}{2} \\\\50C_A=12\\\\C_B=\frac{12}{50} \\\\C_B=0.24M[/tex]

Therefore, the concentration of the carbonic acid is 0.24M

Learn more here: https://brainly.com/question/25943090

Answer:

About 58%.

Explanation:

We first need to write the balanced chemical equation:

[tex]\displaystyle \text{CH$_4$(g)} + 2\text{O$_2$(g)} \longrightarrow \text{CO$_2$(g)} + 2\text{H$_2$O(g)}[/tex]

We are given that 0.809 g of carbon dioxide was produced from the reaction of 0.80 g of methane and 2.1 g of oxygen gas. We want to calculate the percent yield of carbon dioxide.

First, determine the limiting reagent. We can convert each initial mass to the mass of carbon dioxide using stoichiometry. The molar mass of methane is 16.05 g/mol and the molar mass of carbon dioxie is 44.01 g/mol. From the equation, every one mole of carbon dioxide is produced from every one mole of methane and every two moles of oxygen gas.

0.80 g of methane will (theoretically) produce:

[tex]\displaystyle \begin{aligned} 0.80 \text{ g CH$_4$} &\cdot \frac{1 \text{ mol CH$_4$}}{16.05 \text{ g CH$_4$}} \cdot \frac{1 \text{ mol CO$_2$}}{1 \text{ mol CH$_4$}} \cdot \frac{44.01 \text{ g CO$_2$}}{1 \text{ mol CO$_2$}} \\ \\ & = 2.2 \text{ g CO$_2$}\end{aligned}[/tex]

2.1 g of oxygen gas will (theoretically) produce:

[tex]\displaystyle \begin{aligned} 2.1 \text{ g O$_2$} & \cdot \frac{ 1 \text{ mol O$_2$}}{32.00 \text{ g O$_2$}} \cdot \frac{1 \text{ mol CO$_2$}}{2 \text{ mol O$_2$}}\cdot \frac{44.01 \text{ g CO$_2$}}{1 \text{ mol CO$_2$}} \\ \\ & = 1.4 \text{ g CO$_2$} \end{aligned}[/tex]

Hence, oxygen gas is the limiting reagent. A maximum of 1.4 g of carbon dioxide can be produced.

To calculate the percent yield, we divide the actual yield by the theoretical yield. The actual yield was 0.809 g and the theoretical yield is 1.4 g. Hence:

[tex]\displaystyle \begin{aligned} \%\text{Yield} & = \frac{\text{Actual}}{\text{Theoretical}} \times 100\% \\ \\ & = \frac{(0.809\text{ g CO$_2$})}{(1.4\text{ g CO$_2$})} \times 100\% \\ \\ & = 58\%\end{aligned}[/tex]

In conclusion, the percent yield of carbon dioxide is about 58%.

There are 2 electrons in the overlapping region.

Chlorine is the second member of the halogen group which are form of family of elements that resemble one another very closely.

The electronic configuration of chlorine shows the arrangement of chlorine electrons within it's atom.

At the outer most shell of the atom is seven electrons, therefore requires only one electron each to attain the octet arrangement.

The overlapping of the orbitals indicates the chemical bond formed by sharing of electrons between atoms called covalent bonding.

To complete it's outer most shell, it will need to share electron with another chlorine atom.

Therefore, there are 2 electrons in the overlapping region.

Learn more here:

https://brainly.com/question/16396974

Answer:

730 N

Explanation:

force =mass ×acceleration

force= 73kg×10m/s

F=730N

Answer:

huh

Explanation: