HELP PLZ I will give you 10 points

An electric field of 3 × 1016 Newtons over Coulombs. is needed to create a spark in the air. If the charged particles in the field are separated by a distance of 1 mm, how many coulombs of charge are needed for a spark? (Round to the nearest whole number.)

Answer:

140.8/2.54=55.43 inches

Answer:

133225

Explanation:

Answer:

a) wind power system, turbines powered, solar power system

b) the possibility of creating jobs for the local workforce and of maintaining the environment without damaging it.

Explanation:

In a grassland system it may not have great changes in height or mountain system where it is easy to represent a river, therefore a hydroelectric power system is not very feasible.

a) You can have several alternative energy systems.

* If there is a fairly constant air current, a wind power system could be implemented.

* If there is a river with an acceptable flow, a generation system can be implemented with turbines powered by the river flow.

* Another system is a solar power system

b) To select any of the possible systems proposed, the current and future energy requirements of the region must be analyzed.

The amount of energy that each proposal can supply

Analyze the installation costs and the economic benefits of a given system.

Study the possible problems for the maintenance of each system.

A great advantage of these systems is the possibility of creating jobs for the local workforce and of maintaining the environment without damaging it.

The most plausible renewable energy source in a grassland is wind energy.

Renewable energy refers to energy that is obtained from wind, water biomass or underground heat. All of these sources of energy are inexhaustible and hold great prospect to solving the current energy deficit is many parts of the world.

In grasslands, the most plausible renewable source of energy is wind. Winds are abundant in grasslands . It is more plausible than hydroelectric power because it does not create any adverse environmental impact. It is the cleanest energy source.

Learn more about renewable energy: https://brainly.com/question/4038933

The weight of the pail and sand necessary to start the pumpkin moving in this case is less than 11 N.

The force of friction acting on the pumpkin depends on the weight of the pumpkin and the coefficient of static friction.

F = μW

where;

The weight of the pumpkin is calculated as follows;

W = mg

where;

W = 1.8 kg  x  9.8 m/s²

W = 17.64 N

The static friction force preventing the pumpkin from moving is calculated as follows;

F = μW

F = 0.55 x 17.64 N

F = 9.7 N

Thus, the minimum force required to move the pumpkin is 9.7 N which is less than 11 N.

Learn more about static friction force here: https://brainly.com/question/13680415

#SPJ1

The complete question is blow:

Suppose the coefficient of static friction is 0.55 rather than 0.61. is the weight of the pail and sand necessary to start the pumpkin moving in this case greater than, less than or equal to 11 N? calculate the required weight. mass of the pumpkin is 1.8 kg.

Answer:

Magnetic induction cannot be done in a wood because it is not a magnetic person like iron , nickel,and cobalt

Answer:

False

Explanation:

The mass of an object is normally known as the weight of the object. but mass is the amount of matter in the object. Weight is the force exerted on an object by gravity

Answer: False

Explanation: mass is the amount of matter in an object

Answer:

58,800 Joules

Explanation:

I used the formula for Potential energy which is PE = mgh

200 kg x 9.8 m/s^2 x 30 m = 58,800 J

At the very tops of the rollercoaster is maximum PE which is 58,800 J and 0 J of KE, but at the very bottom is maximum KE (kinetic energy) which is 58,800 Joules but 0 J of PE. This is because energy can not be destroyed ONLY converted

Answer:

C    Don't worry if you thought it was D. I almost answered that.

Explanation:

Remark

You can get this just by learning the vocabulary.

Efficiency = Work Out / Work In * 100%

Work in = 30J      That's you swinging the hammer.

Work out = 10 J    That's how much of the hammer's work gets to the nail.

Efficiency = (10/30)*100

Efficiency = 1/3 * 100

Efficiency = 33%

Answer:

I think its 40%, pls correct me if I am wrong :(

Explanation:

Answer:

a. confounding variables.

Explanation:

An experiment can be defined as an investigation which typically involves the process of manipulating an independent variable (the cause) in order to be able to determine or measure the dependent variable (the effect).

This ultimately implies that, an experiment can be used by scientists to show or demonstrate how a condition causes or gives rise to another i.e cause and effect, influence, behavior, etc in a sample.

In an experiment , the variable being manipulated by an experimenter is known as an independent variable while the dependent variable is the event expected to change when the independent variable is manipulated.

A confounding variable can be defined as a variable that generally influences both the independent and dependent variable in an experiment or research study. Thus, it creates an association between the two variables in an experiment.

Hence, when conducting research, confounding variables are unintentional factors that creep into your experiment and have the potential to affect or even spoil your results.

Explanation:

Given that,

Vector a = 4i+3j

Vector b = -13i+7j

We need to find the magnitude and direction of (a+b). So,

(a+b) = (4i+3j) + (-13i+7j)

= (4i-13i)+(3j+7j)

= -9i+10j

Magnitude of (a+b).

[tex]|a+b|=\sqrt{(-9)^2+10^2} \\\\=13.45[/tex]

Direction of (a+b),

[tex]\tan\theta=\dfrac{10}{-9}\\\\\theta=\tan^{-1}(\dfrac{-10}{9})\\\\\theta=-48.01^{\circ}[/tex]

Hence, this is the required solution.

Answer:

In a transverse wave, the particles are displayed perpendicular to the direction the wave travels . in a longitudinal wave the particles are are displayed parallel to the direction the wave travels. an example of longitudinal waves in compressions moving along a slinky.

Answer:The skater has the lowest amount of kinetic energy at the top of the track and lowest potential energy at the lowest point of the track. Kinetic energy is the speed a object is going, and potential energy is the energy a object has when its not moving. While the skater moves up the ramp the potential energy increases, and the kinetic energy decreases because it slows down while moving up the ramp. Hope this helps have a nice day ❤️

Explanation:

First recognize that the total energy of the skater is conserved: this means that the total energy of the skater is constant. The total energy (E) consists of the kinetic energy (KE) and gravitational potential energy (Ug).

E=KE+Ug

Now we know that the gravitational potential energy depends on the distance from the zero of potential (or in simpler terms: how high the skater is from the ground). Now, we are ready to answer the question.

The skater possesses the most KE at point B: remember total energy is a constant and at point B the skater has the least amount of potential energy (since they are at their lowest point above the ground). This means that the skater must have more kinetic energy at point B.

Similarly, at points A and C, the skater possesses the most potential energy since they are at their highest point above the ground.

As the skateboarder moves then it will have the maximum kinetic energy at the lower most portion of the track and will have the zero potential energy at the same point and at the maximum height of the track the skater will have maximum potential energy and zero kinetic energy.

As the skater moves on the track his kinetic and potential energy converts into each other but the total energy remains constant.

Total Energy = KE+PE

At maximum height the kinetic energy will totally convert into the potential energy and becomes zero.and the potential energy becomes maximum at this point.

At Max height (Total energy=Max Potential energy)         KE=0

Similarly at the lower most portion of the track the Potential energy completely convert into the kinetic energy and becomes zero. And kinetic energy becomes max at this point.

At lower point  (Total energy= Max Kinetic Energy)         PE=0

Thus the skater will have the most kinetic energy at the lower most point of the track and least potential energy at the same point.

To know more about energy follow

https://brainly.com/question/1634438

Answer:

10.2 km

Explanation:

Displacement is the shortest distance from your original position after movement.

Now, the Zambeef delivery truck moves 18 km north and then 10 km east and then 16 km south.

This means that vertically the truck is 2km short of the 18 km he travelled north..

So we can find the displacement using pythagoras theorem..

Let d be the distance from the current position to the initial position.

Thus;

d² = 2² + 10²

d² = 4 + 100

d = √104

d ≈ 10.2 km

I have attached a diagram showing the direction of this displacement

Answer:

reversing the current

Explanation:

Answer:

B. Its virtual and behind the mirror.

Explanation:

Answer:  (B) Virutal, (D) Upright, (E) Smaller.  

Explanation:

Edge Physics B

Answer:

C?

Explanation:

There's 2 different atoms, Ca and F. Unless it's counting the whole thing... then three? (Ca + 2 F atoms)

Answer:

A. coal, oil, natural gas

Explanation:

this is because those three are related to fossil fuels.

Answer:

A:Coal,Oil,Natural gas

Explanation:

that pfp tho

Answer:

A....It is a crime sene

Explanation:

Answer:

3kg sledgehammer swung at 1.5 m/s

Explanation:

Small Sledgehammer:

Mass:3.0

Velocity:1.5

MASS×VELOCITY=MOMENTUM

3.0×1.5= 4.5 (momentum)

Large Sledgehammer:

Mass:4.0

Velocity:0.9

4.0×0.9=3.6 (momentum)

higher momentum is the smaller Sledgehammer.

Answer:

Sound waves have to travel through solids, gases, and liquids. Sound waves vibrate through the air in matter. Molecules in solids are packed tightly. This allows sound to travel faster through a solid than gas.

Answer:6.91 Nm

Explanation:

further from I didn't know the answer

Answer:

it might be b, good luck

Explanation:

not too sure

Answer:

A: 0.83 Hz

Explanation:

Frequency can be calculated in a multitude of ways. The one way that is going to help you solve this problem is (# of times/seconds)

so you would divide 85 swings/102 seconds

= 5/6 or 0.8333 Hz

so your answer is A