HELP PLEASESSS MAKE YOU AS BRANLESTS

Answer:

113.1 cm³

Step-by-step explanation:

diameter = 2 X radius

Volume of sphere = (4/3) X π X r ³

= (4/3) π (3)³

= 36π

= 113.1 cm³ to nearest tenth

The correct 4-bit combination for the decimal number 9 is 1001. To explain it in a long answer, we need to understand binary representation. In binary, each digit can either be 0 or 1, and the value of the digit depends on its position.

The rightmost digit represents the value 2^0 (which is 1), the next digit to the left represents the value 2^1 (which is 2), the next represents 2^2 (which is 4), and so on. To convert decimal number 9 to binary, we can start by finding the highest power of 2 that is less than or equal to 9, which is 2^3 (which is 8). We can subtract 8 from 9, and the remainder is 1. This means the leftmost digit in the binary representation is 1.

We repeat the same process with the remainder, which is 1, and find the highest power of 2 that is less than or equal to 1, which is 2^0 (which is 1). We subtract 1 from 1, and the remainder is 0. This means the rightmost digit in the binary representation is 0. Thus, the binary representation of decimal number 9 is 1001, which is the correct 4-bit combination.

To know more about combination visit:-

https://brainly.com/question/30113947

#SPJ11

Answer:

Avg BC= 10.873 m

Step-by-step explanation:

See a picture

The value of angle x in the kite is 243 degrees.

The diagram above is a kite. The sum of angle in a kite is 360 degrees. Therefore, a kite kites have two sets of equivalent adjacent sides and one set of congruent opposite angles.

Therefore,

360 - 318 + 84 + 2y = 360

where

y are the inner congruent angles

Therefore,

42 + 84 + 2y = 360

2y = 360 - 126

2y = 234

divide both sides of the equation by 2

y = 234  /2

y = 117 degrees

Therefore,

x = 360 - 117

x = 243 degrees

learn more on kites here: https://brainly.com/question/31509858

#SPJ1

To calculate the probability that two people chosen at random were born during the same month of the year, we need to consider the total number of possible outcomes and the favorable outcomes.

There are 12 months in a year, so the total number of possible outcomes is 12 (one for each month).

Now, let's consider the favorable outcomes. To have two people born in the same month, we need to choose any one of the 12 months for the first person, and then the second person should also be born in the same month.

The probability that the second person is born in the same month as the first person is 1/12 since there is only one favorable outcome out of 12 possible outcomes.

Therefore, the probability that two people chosen at random were born during the same month of the year is 1/12 or approximately 0.0833 (rounded to four decimal places).

To learn more about Probability - brainly.com/question/31120123

#SPJ11

If the universal set is {0, 1, 2, 3, 4, 5, 6, 7, 8, 9} then (A ∪ B) ∩ C = {1, 3, 5}, A' U B = {0, 2, 4, 6, 7, 8, 9} and  (A ∩ C)' = {0, 2, 4, 6, 7, 8, 9}.

The universal set is {0, 1, 2, 3, 4, 5, 6, 7, 8, 9}

To find (A ∪ B) ∩ C, we first need to find A ∪ B and then find the intersection with C.

A ∪ B is the set of all elements that are in A or B, so:

A ∪ B = {1, 2, 3, 4, 5, 6, 8}

Now we need to find the intersection of A ∪ B and C:

(A ∪ B) ∩ C = {1, 3, 5}

Therefore, (A ∪ B) ∩ C = {1, 3, 5}.

b. A' is the complement of A, which means it is the set of all elements in U that are not in A.

A' = {0, 6, 7, 8, 9}

A' U B is the set of all elements that are in A' or B, so:

A' U B = {0, 2, 4, 6, 7, 8, 9}

Therefore, A' U B = {0, 2, 4, 6, 7, 8, 9}.

c. A ∩ C is the set of all elements that are in both A and C:

A ∩ C = {1, 3, 5}

(A ∩ C)' is the complement of A ∩ C, which means it is the set of all elements in U that are not in A ∩ C:

(A ∩ C)' = {0, 2, 4, 6, 7, 8, 9}

Therefore, (A ∩ C)' = {0, 2, 4, 6, 7, 8, 9}.

To learn more on Sets click:

https://brainly.com/question/8053622

#SPJ1

The probability density function on [0 1] is 36, the correct option is C.

We are given that;

Function f(x) = ke-^(3x+2)

Now,

The function f(x) = ke^(-3x+2) is a probability density function on [0 1] if and only if the integral of f(x) from 0 to 1 is equal to 1.

∫(0 to 1) ke^(-3x+2) dx = -1/3ke^(-3x+2) from 0 to 1 = -1/3ke^-1 + 1/3ke^2

For f(x) to be a probability density function, the above expression must be equal to 1. Therefore,

-1/3ke^-1 + 1/3ke^2 = 1

Solving for k gives us k = 36

Therefore, by probability the answer will be 36.

Learn more about probability here;

https://brainly.com/question/9326835

#SPJ1

The experimental probability that Sue will hit the bullseye on her next toss is 2/7.

We have,

The proportion of outcomes where a specific event occurs in all trials, not in a hypothetical sample space but in a real experiment, is known as the empirical probability, relative frequency, or experimental probability of an event.

Here, we have

Given: Sue is playing darts. So far, she has hit the bullseye 4 times and missed the bullseye 10 times.

We have to find the experimental probability that Sue will hit the bullseye on her next toss.

experimental probability = 4/(4+10) = 4/14 = 2/7

The next toss = P = 2/7

Hence,  the experimental probability that Sue will hit the bullseye on her next toss is 2/7.

To learn more about the experimental probability from the given link

brainly.com/question/8652467

#SPJ1

complete question:

Sue is playing darts. So far, she has hit the bullseye 4 times and missed the bullseye 10 times. What is the experimental probability that Sue will hit the bullseye on her next toss?

(i) (CUD-E) specified using set builder notation:

(CUD-E) = {x ∈ R | (x > 0 ∧ x ≤ 10) ∨ (x > 9 ∧ x ≤ 15) ∧ x ∉ {1, 2, 3}}

(ii) (CE) specified using interval notation and set operations concisely:

(CE) = (0, 10] ∩ {1, 2, 3} = {1, 2, 3}

(iii) (CDF) specified using the most concise notation:

(CDF) = (C ∩ D) ∩ F

(b) Proof using the element argument method:

Given: A and B are sets such that P(A) ≤ P(B).

To prove: A ≤ B.

Proof:

1. Let x be an arbitrary element in A.

2. Since x is in A, by definition, x is a subset of A. Hence, x ⊆ A.

3. Since x ⊆ A and A ≤ B, by the definition of ≤, x ⊆ B.

4. Therefore, x is a subset of B. Hence, x ∈ P(B), where P(B) is the power set of B.

5. Since x ∈ P(B), by definition, x is a subset of B. Hence, x ⊆ B.

6. Since x is an arbitrary element in A and x ⊆ B, by definition, A ≤ B.

7. Therefore, if P(A) ≤ P(B), then A ≤ B.

In this proof, we used the fact that if x is an element of A, then x is a subset of A. Also, if x is a subset of A and A ≤ B, then x is a subset of B. These properties are based on the definitions of subsets and the order relation between sets.

Learn more about set builder notation here:

https://brainly.com/question/30712666

#SPJ11

Models should be produced of the function C(x) = 10 + 2 x is 329.4 .

Cost of manufacturing is

C(x) = 10 + 2 x

Sale price in soles of each model is

P(x) = 20 - [tex]\frac{6x^{2} }{800}[/tex]

U(x) is the utility function

U(x) = x P(x) - C(x)

U(x) = x (20 - [tex]\frac{6x^{2} }{800}[/tex]  ) - (10 +2x)

U(x) = 20x - [tex]\frac{6x^{3} }{800}[/tex]   - 10 - 2x

U(x) = 18x - [tex]\frac{6x^{3} }{800}[/tex] - 10

U'(x) = 18 - 18x²/800

For maximum model U'(x) = 0

18 - 18x²/800 = 0

18x²/800 = 18

x² = 800

x = √800

x = 20√2

U(x) = 18(20√2 ) - [tex]\frac{6(20\sqrt{2} )^{2} }{800}[/tex] - 10

U(x) = 329.5

To know more about function click here :

https://brainly.com/question/21326461

#SPJ4

The question is in Spanish question in English :

The manufacturing costs of models are modeled to the following function. C(x) = 10 + 2x. The manufacturer estimates that the sale price in soles of each model is given by: P(x) = 20- 6x2/800 How many models should be produced?

Answer:

Step-by-step explanation:

Given two of three numbers correct, you want to find the correct value for the third number of 8 faces, 7 vertices, and 10 edges.

The relation between faces, vertices, and edges is ...

  F + V = E + 2

The given numbers are off by 3:

  8 + 7 = 15 ≠ 12 = 10 + 2

We can decrease the numbers of Faces or Vertices by 3, or we can increase the number of Edges by 3.

The numbers will be correct if we change to ...

#95141404393

We can expect approximately 9 rats to die after being injected with cancerous cells based on probability.

To answer your question, we will use the given probability and the number of rats injected to find the expected number of rats that would die.

1. The probability that a rat injected with cancerous cells will live is 0.8.
2. Therefore, the probability that a rat will die is 1 - 0.8 = 0.2 (since the sum of probabilities of all possible outcomes should be equal to 1).
3. We have 45 rats injected with cancerous cells.
4. To find the expected number of rats that would die, multiply the total number of rats by the probability of a rat dying: 45 rats * 0.2 = 9 rats.

So, we can expect approximately 9 rats to die after being injected with cancerous cells.

Learn more about probability here:

https://brainly.com/question/26760623

#SPJ11

By the Mean Value Theorem, there exists a value c in the interval [1,4] such that f'(c) is equal to the average rate of change of f on the interval [1,4], which is (f(4) - f(1))/(4-1).

We can start by computing f(4) and f(1):

f(4) = 5cos(2(4^2)) + ln(4+1) - 3 = -0.841 + 1.609 - 3 = -1.232

f(1) = 5cos(2(1^2)) + ln(1+1) - 3 = 2.531 - 0.693 - 3 = -1.162

Then, we can compute the average rate of change:

(f(4) - f(1))/(4-1) = (-1.232 - (-1.162))/3 = -0.023

To satisfy the conclusion of the Mean Value Theorem, we need to find a value c in the interval [1,4] such that f'(c) = -0.023. From the given expression for f'(x), we can see that there is no value of c that satisfies this equation, since f'(x) can never be negative. Therefore, there is no value of c that satisfies the conclusion of the Mean Value Theorem applied to f on the interval [1,4].

To learn more about mean value theorem click here :

brainly.com/question/15576742

#SPJ11

The exact length of the curve is 8/3 (5sqrt(26) - 1).

To find the length of the curve, we can use the arc length formula:

L = ∫[tex][a,b]sqrt(dx/dt)^2 + (dy/dt)^2 dt[/tex]

where a and b are the starting and ending values of the parameter t, and dx/dt and dy/dt are the derivatives of x and y with respect to t, respectively.

Plugging in the given equations, we get:

[tex]dx/dt = 24t[/tex]

[tex]dy/dt = 24t^2[/tex]

Therefore,

[tex](sqrt(dx/dt)^2 + (dy/dt)^2) = sqrt((24t)^2 + (24t^2)^2) = sqrt(576t^2 + 576t^4)[/tex]

Substituting these expressions into the arc length formula, we get:

L = ∫[tex][0,2]sqrt(576t^2 + 576t^4) dt[/tex]

We can factor out 576t^2 from the square root:

L = ∫[tex][0,2]sqrt(576t^2(1 + t^2)) dt[/tex]

And then simplify the expression inside the square root:

L = ∫[tex][0,2]24t sqrt(1 + t^2) dt[/tex]

This integral can be evaluated using the substitution[tex]u = 1 + t^2, du/dt = 2t, dt = du/2t:[/tex]

L = ∫[tex][1,5]12 sqrt(u) du[/tex]

Now we can use the power rule of integration to evaluate this integral:

[tex]L = [8/3 u^(3/2)]_1^5 = 8/3 (5sqrt(26) - 1)[/tex]

Therefore, the exact length of the curve is 8/3 (5sqrt(26) - 1).

Learn more about integration

brainly.com/question/31585464

#SPJ11

There is insufficient evidence to conclude that the mean blood pressure for women is different from the mean blood pressure for men. To determine whether the mean blood pressure for women is equal to the mean blood pressure for men, a t-test is conducted using the sample data of 16 women (group 1) and their respective brothers' blood pressures (group 2).

The null hypothesis states that the means are equal, and the alternative hypothesis suggests they are different. The test statistic is calculated, critical points are identified, and the null hypothesis is either accepted or rejected based on the test results.

To carry out the t-test, we first calculate the test statistic. The formula for the test statistic (t) in this case is:

t = (x1 - x2) / sqrt((s1^2 / n1) + (s2^2 / n2))

where x1 and x2 are the sample means, s1 and s2 are the sample standard deviations, and n1 and n2 are the sample sizes.

Given:

x1 = 119.4 (average blood pressure for women)

x2 = 121.2 (average blood pressure for men)

s2d = 25 (pooled sample variance)

n1 = n2 = 16 (sample sizes)

α = 0.05 (Type I error value)

Now, we can calculate the test statistic:

t = (119.4 - 121.2) / sqrt((25/16) + (25/16))

 = -1.8 / sqrt(3.125 + 3.125)

 = -1.8 / sqrt(6.25)

 = -1.8 / 2.5

 = -0.72

Next, we determine the relevant critical point(s) for the t-test. Since the sample size is small (n1 = n2 = 16), we refer to the t-distribution with degrees of freedom equal to n1 + n2 - 2 = 30 - 2 = 28. Using a significance level (α) of 0.05, the critical value for a two-tailed test is approximately ±2.048.

Since the absolute value of the test statistic (0.72) is less than the critical value (2.048), we fail to reject the null hypothesis.

Learn more about null hypothesis here:

brainly.com/question/19263925

#SPJ11

The correct answer is: Nicole’s rate is 45 mi/h, and Kim’s rate is 40 mi/h.

Nicole and Kim are driving towards each other at a combined speed of 170 miles in 2 hours, so their average speed is 85 miles per hour. Let's assume that Kim's speed is x miles per hour, then Nicole's speed is x+5 miles per hour.

So, the equation we get from their combined speed is:

x + (x+5) = 85

Simplifying the equation, we get:

2x + 5 = 85

2x = 80

x = 40

To learn more about  Speed click here

brainly.com/question/29077665

#SPJ11

The association in this graph can best be described as C. Negative linear.

A negative linear association is one that moves from the left to the right. In this kind of association, the predictor increases while the response decreases. The linear nature of this association is seen in the straight line formed from the plot.

A positive linear association would fall from the right towards the left side and a non-linear association will form a curve. So, the association in the table is negative linear.

Learn more about the negative linear association here:

https://brainly.com/question/30871880

#SPJ1

The probability that the average height of 3 young women is at most 63 inches is approximately 12.38%. Here option A is the correct answer.

To calculate the probability that the average height of 3 young women is at most 63 inches, we need to use the central limit theorem, which states that the distribution of the sample means of a sufficiently large sample from any population with a finite mean and variance will be approximately normally distributed.

Assuming the heights of young women follow a normal distribution, with a mean of μ and a standard deviation of σ, we can calculate the probability using the standard normal distribution table or a statistical software package.

First, we need to calculate the mean and standard deviation of the sample mean. The mean of the sample mean is equal to the population mean, μ, which we assume to be 65 inches. The standard deviation of the sample mean is equal to the population standard deviation divided by the square root of the sample size, which is 3 in this case. Assuming a standard deviation of 3 inches, the standard deviation of the sample mean is 3 / sqrt(3) = 1.73 inches.

Next, we need to calculate the z-score for a sample mean of 63 inches:

z = (63 - 65) / 1.73 = -1.16

Using the standard normal distribution table, we can find the probability that a z-score is less than or equal to -1.16. The probability is 0.1238, or approximately 12.38%.

To learn more about probability

https://brainly.com/question/32004014

#SPJ4

Complete question:

If we select 3 young women at random, what is the probability that their average height is shorter than / at most 63 inches (that is, they are at most 63 inches tall, on average)?

A - 12.38

B - 13.38

C - 15.48

D - 17.40

Answer:

51

Step-by-step explanation:

Sum of interior angles in a triangle is 180.

x + 90 + 39 = 180

x + 129 = 180

x = 180 - 129

x = 51

Answer:

51 degrees

Step-by-step explanation:

We are asked to find angle x.

To find angle x, we have to write an equation to find it.

We know that one angle is 39 degrees, and the other is 90 degrees because of the small box.  We also know that all 3 angles in a triangle have to add up to 180.

Here's the equation for this:

180=39+90+x

simplify

180=129+x

subtract 129 from both sides

51=x

So, angle x is 51 degrees.

Hope this helps! :)

The solutions of the quadratic equation x² - 7x = -12 are x = 3 or x = 4

From the question, we have the following parameters that can be used in our computation:

x² - 7x=-12

Express properly

So, we have

x² - 7x = -12

Add 12 to both sides

x² - 7x + 12 = 0

When factored, we have

(x - 3)(x - 4) = 0

Using the zero product property , we have

x - 3 = 0 or x - 4 = 0

Evaluate

x = 3 or x = 4

Hence, the solutions of the quadratic equation are x = 3 or x = 4

Read more about quadratic equation at

https://brainly.com/question/1214333

#SPJ1

Answer: y=x²+5x−24

Step-by-step explanation:

There are 10 boys in Mr. Johnson's class, and the total number of Students in the class is:10 + 15 = 25

If the ratio of boys to girls in Mr. Johnson's class is 2 to 3, this means that for every 2 boys, there are 3 girls. Let's represent the number of boys in the class as "b". Then we can set up the following proportion:2/3 = b/15

To solve for "b", we can cross-multiply:2 x 15 = 3 x b

30 = 3b

b = 10

Therefore, there are 10 boys in Mr. Johnson's class, and the total number of students in the class is:10 + 15 = 25

It's worth noting that we could have also found the number of girls in the class by using the ratio. Since the ratio of boys to girls is 2 to 3, this means that the total number of parts in the ratio is 2 + 3 = 5. To find the number of girls, we can divide the total number of students (25) by the total number of parts (5) and then multiply by the number of parts representing girls (3):(25/5) x 3 = 15

So we can see that there are indeed 15 girls in the class.

To know more about Students .

https://brainly.com/question/28521601

#SPJ11

The value of the measure of Arc CDE is,

⇒ Arc CDE = 128 degree

Since, An angle is a combination of two rays (half-lines) with a common endpoint. The latter is known as the vertex of the angle and the rays as the sides, sometimes as the legs and sometimes the arms of the angle.

Here, A circle is shown in figure.

And, By circle we have;

The measure of Arc CDE is,

⇒ Arc CDE = 128 degree

Thus, The value of the measure of Arc CDE is,

⇒ Arc CDE = 128 degree

Learn more about the angle visit:;

https://brainly.com/question/25716982

#SPJ1

Answer:

Step-by-step explanation:

a= 3(x+11)

B=9(x+8)

C=5(x+5)

D=3(3x+2)

[tex]6\sqrt{5} \ cis(\frac{11\pi}{6}) \div 3\sqrt{6} \ cis (\frac{\pi}{2} )[/tex] can be expressed in polar form as[tex]6\sqrt{5} \ cis(\frac{11\pi}{6}) \div 3\sqrt{6} \ cis (\frac{\pi}{2} )=\underline{\frac{\sqrt{30} }{3} } \ cis\ (\underline{\frac{4\pi}{3}})[/tex] . Therefore the values to be dragged in the box are [tex]\frac{\sqrt{30} }{3}[/tex]  and [tex]\frac{4\pi}{3}[/tex].

We have to express in polar form, polar form of complex number:

[tex]r(cos\theta+isin\theta) \rightarrow rcis\theta[/tex]

where, r = modulus of complex number

[tex]\theta[/tex] = argument of complex number

The division of two complex number, [tex]z=[/tex] [tex]r_{1} cis \theta_{1}[/tex] and [tex]x=[/tex] [tex]r_{2} cis \theta_{2}[/tex]

[tex]\frac{z}{x} = \frac{r_{1} }{r_{2} }\ cis(\theta_{1}- \theta_{2})[/tex]

Similarly, let a = [tex]6\sqrt{5} \ cis(\frac{11\pi}{6})[/tex]

                    b = [tex]3\sqrt{6} \ cis(\frac{pi}{2})[/tex]

[tex]\frac{a}{b}= \frac{6\sqrt{5} }{3\sqrt{6} } \ cis (\frac{11\pi }{6}- \frac{\pi}{2} )[/tex]

 [tex]= \frac{{\sqrt{2}}\times\sqrt{2}\times\sqrt{5} }{\sqrt{2} \times\sqrt{3} } \ cis(\frac{11\pi-3\pi}{6} )[/tex]

 [tex]=\sqrt{\frac{10}{3} }\ cis\ \frac{8\pi}{6}[/tex]

[tex]\frac{a}{b}= \sqrt{\frac{10}{3} } \ cis\ \frac{4\pi}{3}[/tex]

It can also be written as, [tex]\frac{a}{b}= \frac{\sqrt{30} }{3} \ cis\ \frac{4\pi}{3}[/tex]

⇒ [tex]6\sqrt{5} \ cis(\frac{11\pi}{6}) \div 3\sqrt{6} \ cis (\frac{\pi}{2} )= \frac{\sqrt{30} }{3} \ cis\ \frac{4\pi}{3}[/tex]

Comparing it with the question we get:

[tex]6\sqrt{5} \ cis(\frac{11\pi}{6}) \div 3\sqrt{6} \ cis (\frac{\pi}{2} )=\underline{\frac{\sqrt{30} }{3} } \ cis\ (\underline{\frac{4\pi}{3}})[/tex]

Therefore, the first blank is [tex]\frac{\sqrt{30} }{3}[/tex] and the second blank is [tex]\frac{4\pi}{3}[/tex].

Know more about polar form of complex number,

https://brainly.com/question/28967624

#SPJ1

In the context of the linear search algorithm, the time complexity in the worst-case scenario remains the same, whether the list is sorted or unsorted.

The linear search algorithm has a time complexity of O(n) in the worst case, which means that it takes n steps to search through a list of n elements.
Step-by-step explanation:
1. Start at the first element of the list.
2. Compare the current element with the target value.
3. If the current element is equal to the target value, return the index of the current element.
4. If the current element is not equal to the target value, move on to the next element.
5. Repeat steps 2-4 until you reach the end of the list or find the target value.
In the worst-case scenario, the target value is either at the end of the list or not present in the list. In both sorted and unsorted lists, the algorithm has to traverse the entire list to determine the result. Therefore, there is no asymptotic difference in the worst-case scenario between sorted and unsorted lists when using the linear search algorithm.

To know more about algorithm visit:

https://brainly.com/question/31936515

#SPJ11

The probabilities of hitting the next bat are  Mitchell = 5/12 and Travis= 9/20

From the question, we have the following parameters that can be used in our computation:

Mitchell hits 5 out of 12 times

Travis hits 9 out of 20 times

The probabilities of hitting the next bat is calculated as

P(Hit) = Hit/Total number of times

using the above as a guide, we have the following:

P(Mitchell Hit) = 5/12

P(Travis Hit) = 9/20

Hence, the probabilities of hitting the next bat are 5/12 and 9/20

Read more about probabilities at

https://brainly.com/question/31649379

#SPJ1

In a hypothesis testing context, before examining the data, one should typically decide whether the alternative hypothesis is one-sided or two-sided. This decision is based on the specific research question and the expected direction of the effect being tested.

It helps determine the appropriate statistical test and the formulation of the null and alternative hypotheses.

The computation of the p-value and the decision of whether or not to reject the null hypothesis are made after examining the data and conducting the statistical analysis. The p-value is a measure of the strength of the evidence against the null hypothesis, and it is compared to a predetermined significance level to make a decision. If the p-value is below the significance level, the null hypothesis is typically rejected in favor of the alternative hypothesis.

Therefore, the correct answer is (c) decided whether the alternative hypothesis is one-sided or two-sided.

To learn more about  Hypothesis - brainly.com/question/31319397

#SPJ11