Answer:
2
b= they are grouped differently, but all the atoms are still there.
What volume is occupied by 2.33 miles of an ideal gas at 0.953 atm and 44°C
Answer:
6663.6
Explanation:
All changes in phase (solid-liquid-gas) are
Answer:
States of matter
Explanation:
Three states of matter
If the football indoors had a volume of 5.33 L at 21degrees celsuis, what is the volume of the football outside where the temp is 10C (temp must be in K) MUST SHOW WORK
Answer:
5.13 L
Explanation:
From the question given above, the following data were obtained:
Initial volume (V₁) = 5.33 L
Initial temperature (T₁) = 21 °C
Final temperature (T₂) = 10 °C
Final volume (V₂) =?
Next, we shall convert celsius temperature to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 21 °C
Initial temperature (T₁) = 21 °C + 273
Initial temperature (T₁) = 294 K
Final temperature (T₂) = 10 °C
Final temperature (T₂) = 10 °C + 273
Final temperature (T₂) = 283 K
Finally, we shall determine the final volume. This can be obtained as follow:
Initial volume (V₁) = 5.33 L
Initial temperature (T₁) = 294 K
Final temperature (T₂) = 283 K
Final volume (V₂) =?
V₁/T₁ = V₂/T₂
5.33 / 294 = V₂ / 283
Cross multiply
294 × V₂ = 5.33 × 283
294 × V₂ = 1508.39
Divide both side by 294
V₂ = 1508.39 / 294
V₂ = 5.13 L
Thus, the new volume of the football is 5.13 L
describe each of the three states of matter (solid, liquid, gas)
Explanation:
In a solid particles are firmly together and are stuck in a regular pattern
in a liquid particles still touch but arent in a fixed pattern
in a gas particles move quickly in all directions
Which of the following represents the molecules of one compound and
atoms of one element?
Answer:
i think its b.c but I'm not sure
Answer:
A
Explanation:
A is element as all of them look the same
b is mixture of atoms
C is mixture of atoms and compounds
D is just atoms
E is mixture of element and compound
Indicate which aqueous solution has the highest boiling point elevation. (Kb for water = 0.512 °C/m)
Answer:
carbon tetrachloride
Explanation:
Boiling point elevation of a liquid or a compound is defined as the boiling point of a liquid that is that will be higher when some other other compound is added. It means that the solution has a higher boiling point than the solvent. When a non volatile solute is added to the pure solvent like water, it results in the highest boiling point elevation.
Carbon tetrachloride, Kb = 5.03°C/m shows highest boiling point elevation when it is used to make a 0.10 m non - electrolyte solution.
How is a calorimeter used in this experiment different from the ones used to find the energy content of a snack
Answer:
Kindly check the explanation section.
Explanation:
PS: Note that enough information are not being provided and we do not know the experiment this question is all about. However, some information are provided below which is going to aid in solving when you get access to the main question.
The determination of the heat transferred from one substance to another is one of the important aspect in science. The method in which this heat is being measured is known as calorimetry and the instrument used in this technique is known as the calorimeter.
When the energy content of a snack is needed to be calculated, there is the need use a type of instrument known as bomb calorimeter.
Most of the calorimeters used by students are not so expensive like the used in the industries. Most of these calorimeters operates at a constant pressure while the Bomb Calorimeter operates at constant volume.
If 0.0015 moles of NaOH is dissolved in 11 L of water, what is the pH of the
solution?
Answer:
pH = 10.15
Explanation:
NaOH is a strong base so it dissolves completely.
Calculate your [OH-] first by dividing the moles of OH- by the volume.
0.0015 mol OH- / 11 L = 0.00014
Then, calculate the pOH:
pOH = -log[OH-] = -log(0.00014) = 3.85
pOH + pH = 14, so pH = 14 - pOH = 14 - 3.85 = 10.15
It is more logical to believe that the complex life sustaining processes of the sun-Earth system were created because they Choose... on one another.
A. rely
B. orbit
C. breathe
D. spin
If 95 grams of Iron are needed to react with sulfur, how many grams of sulfur are involved in this reaction?
2 Fe + 3 S=Fe2S3
Answer:
82 g S
Explanation:
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 81.6 grams of sulfur are involved in this reaction.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number.
2 Fe + 3 S[tex]\rightarrow[/tex]Fe[tex]_2[/tex]S[tex]_3[/tex]
mass of iron = 95 grams
Molar mass of iron=55.8450 g/mol
number of moles of iron =Given mass÷ Molar mass of iron
number of moles of iron=95÷ 55.8
number of moles of iron=1.70 moles
The mole ratio between iron and sulfur is 2:3
moles of sulfur = (3/2) moles of iron
moles of sulfur = (3/2)×1.70
moles of sulfur=2.55 moles
Mass of sulfur= number of moles of sulfur× Molar mass of sulfur
=2.55× 32
=81.6g
Therefore, 81.6 grams of sulfur are involved in this reaction.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ2
Sodium bicarbonate (NaHCO3), also known as baking soda, is used to relieve heartburn, sour stomach, or acid indigestion by neutralizing excess stomach acid. When used for this purpose, it is said to belong to the group of medicines called antacids.
How many atoms are found in two molecules of sodium bicarbonate?
Answer:
NaHCO3 = No. of atoms in one molecule is 1 sodium + 1 Hydrogen + 1 carbon + 3 oxygens = 6 atoms per molecule.
We double it for two molecules, so 12 Molecules!
Explanation:
Hope i helped, Brainliest would be appreciated!
Have a nice day!
-Aadi x
2.00g of Copper wire was added to 50.0 mL of a 0.050M solution of Silver Nitrate. The reaction
produced solid silver and aqueous copper II Nitrate. The silver precipitate was collected and
dried. It was determined that the mass of the silver precipitate was 0.24 g. Use this information
to determine the theoretical yield, limiting reactant, and percent yield.
Answer:
See explanation
Explanation:
Now, the equation of the reaction is;
Cu(s) + 2AgNO3(aq) --------> Cu(NO3)3 (aq) + 2Ag(s)
Number of moles of silver precipitate = 0.24/108 g/mol= 0.0022 moles
Number of moles of AgNO3 = 50/1000 * 0.050 = 0.0025 Moles
If 2 moles of AgNO3 yields 2 moles of Ag
Then 0.0025 moles of AgNO3 yields 0.0025 * 2/2 = 0.0025 moles of Ag
Number of moles of Cu = 2.00g/63.5 g/mol = 0.03 moles
If 1 mole of Cu yields 2 moles of Ag
0.03 moles of Cu yields 0.03 moles * 2/1 = 0.06 moles of Ag
Hence AgNO3 is the limiting reactant
Theoretical yield of Ag = 0.0025 moles of Ag * 108 = 0.27 g
Actual yield of Ag = 0.24 g
Percent yield = actual yield/theoretical yield * 100
Percent yield = 0.24/0.27 * 100
Percent yield = 88.8%
A student asks why the ashes from a fire have much lower mass than the wood that was burned. Which of the following is the correct answer to the student's question?
Answer:
It have lower mass because much of the ashes came from the burned wood. (ashes were like little parts of the wood). plus most of the fuel was turned in to fire (light and heat energy) so yeah ash is just the left over.
Explanation:
This is agree or disagree I need help ASAP!!
Answer:
disagree
sometimes they attract
Explanation:
Answer:
Explanation:
2. Agree
3. Agree
4. Agree
5. agree
6. disagree
If im wrong its because im tired lol
HELP ME ASAP PLZZ 21 POINTS
Answer:
A, D, F
Explanation:
Cold currents usually go along with Earth's rotation while the warm waters are subjected to the coriolis effect and go in a direction against Earth's rotation.
Biomes are characterized by temperature, precipitation, and the plant and animal communities that live there.
True or false?
i need help i have a homework assignment to finish and this is the last question help please and thank u
show the path to the formation of sodium calcium and aluminum bases please help me
Answer:
i hope this helps :)
Explanation:
please mark brainlest
Answer:
dunno
Step-by-step explanations:
You and a friend are swimming at your grandparent's house one toasty
summer afternoon. You have music playing through the Bluetooth speaker
on the pool deck, but every time you go underwater, you can hear the
noise, but you cannot understand the words of the song. What would
explain this phenomenon? *
Sound waves travel faster in a gas than they do in a liquid, which is why you cannot
understand the words,
Sound waves travel faster in a liquid than a gas, our ears are just not designed to
translate the faster moving waves,
Sound waves cannot travel at all in a liquid, which is why you cannot understand the
words and it's a miracle you can even hear the music at all,
Sound waves travel at the same speed regardless of the medium; your grandfather is
turning the music on and off when you go underwater and the noise you hear is the
song stuck in your head,
Answer:
Sound waves travel faster in a liquid than a gas, our ears are just not designed to translate the faster moving waves.
Explanation:
Sound waves are mechanical waves which travel through vibrating the medium (the "stuff") they're traveling through. This means they actually move faster through materials that are more dense, and will move more quickly through liquid than gas, and a solid than a liquid. However, our ears are adapted to "translating" sound waves in air rather than water, so we don't understand the music well when the waves move through the water.
A similar idea explains why our vision is blurry underwater; light waves travel at a different speed (slower, not faster!) in water and our eyes perceive this change in speed as blurriness.
People should be more concerned about the global water budget than the local water budget.
True
Or false
Use the Word Correctly in a Sentence
Ion
Ohio Achievement Test Coach Science, Grade 5
10. Bob first blows whistle hard. Then he blows the same whistle gently. What
changed when Bob blew the whistle the second time?
POSTTEST
A pitch
B. volume
C. pitch and volume
D. frequency
Which 0.1 M solution has a pH greater than 7?
w
1. C6H1206
2.CH3COOH
3.КСІ
4.KOH
Answer:
4) KOH
Explanation:
Trust
0.1 M KOH has a pH greater than 7.
What is pH?
The pH of a solution is a measure of hydrogen ion (H+) concentration, which is, a measure of acidity.
What is POH?The pOH of a solution is measure of hydroxide ions (OH).which is a measure of basicity.
The pH of
CH3COOH is 2.88..КСІ is 7KOH is 12∴According to the question the pH greater than 7 is KOH
Learn more about pH here: https://brainly.com/question/172153
#SPJ#
The following statements were stated by a politician who was paid by the nuclear energy lobby in a debate in favor of nuclear energy:
a. Nuclear energy doesn’t produce a byproduct because the atoms disappear.
b. Nuclear energy produces no polluting gas in its reaction.
c. Nuclear energy does not contribute to global warming.
d. Nuclear energy has low mining and transportation effects on environment.
Which statement is false and should not be used to argue in favor of nuclear energy?
A) Statement A
B) Statement C
C) Statement D
D) Statement B
Answer:
d
Explanation:
the best state ment is d lol
what is the molar mass of.
3 moles of iodine, 5 moles of gold, and 2.5 moles of potassium
Answer:
choices?
Explanation:
how much atomic mass does Osmium have
Answer:
190.23g
Explanation:
Osmium is element number 76 on the periodic table, with the atomic symbol "Os." The atomic mass of any element is listed underneath the atomic symbol. Osmium has an atomic mass of 190.23 grams.
please help there is a pic and marking brain list
Answer:
3
Explanation:
Carbon dioxide and oxygen are both ___ found in the air.
Answer:
gases
Explanation:
Answer:
the Carbondioxed and oxygen are both a gass found in the air
A rock collection comes from which part of Earth?
A. atmosphere
B. biosphere
C. geosphere
D. hydrosphere
Answer:
c
Explanation:
I looked the answer up it said it was geosphere
Answer:
the answer is geosphere
Explanation:
i hope it helps you
Convert the following problems:
a 96 kg to g
b 15 cL to kL
c 188 dL to L
d 3600 m to km
e 234 K to °C
f 43 °C to °F
i would really appreciate the help on this, I'm kinda struggling
Answer:
a.) 96000 g
b.) 0.00015 kL
c.) 18.8 L
d.) 36 KM
e.) -39.15 C
f.) 109.4 F
Explanation:
To turn kg to g, multiply the value by 1000
To Turn CL to KL, divide the volume value by 10000
To turn dl to l, divide volume by 10
to turn m to km, multiply meter value by 0.001 or divide by 1000
To convert c to f, multiply the temperature in degrees Celsius by 2, and then add 30
i hope this helps : )