Help me with my Science, Part 1 and 2 please this has to be done by tomorrow

Answer:

Dilute the sample

Explanation:

The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.

However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.

The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.

At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.

Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.

Learn more about proteins here:

https://brainly.com/question/30986280

#SPJ 6

The number of atoms of Hg in 4.5 mole sample has been given as [tex]\rm 2.7099\;\times\;10^2^4[/tex]. Thus, option A is correct.

The number of atoms in a mole of sample has been given by Avogadro number. Avogadro number has been a constant and has been given the value of [tex]\rm 6.023\;\times\;10^2^3[/tex].

The number of atoms in a mole of sample has been given as:

[tex]\rm 1\;mole=\;6.022\;\times\;10^2^3[/tex]

The given sample has been consisted of 4.5 moles of Hg. Thus, the number of atoms in the sample has been given by:

[tex]\rm 1\;mole\;Hg=\;6.022\;\times\;10^2^3\;atoms\\4.5\;mol\;Hg=4.5\;\times\;6.022\;\times\;10^2^3\;atoms\\4.5\;mol\;Hg=27.099\;\times\;10^2^3\;atoms[/tex]

The scientific notation has been the short hand used for writing the numbers. The short hand for atoms in 4.5 moles of Hg has been [tex]\rm 2.7099\;\times\;10^2^4[/tex].

Thus, the number of atoms of Hg in 4.5 mole sample has been given as [tex]\rm 2.7099\;\times\;10^2^4[/tex]. Thus, option A is correct.

For more information about the number of atoms, refer to the link:

https://brainly.com/question/20672430

Answer:

4.50000 moles

Explanation:

This is dimensional analysis. If there is 163.59 grams in 1 mole of this compound then the converse is true: in 1 mole of this compound there is 163.59 grams --> 1 mol/163.59 grams.

Now that you have your conversion factor:

736.155 grams * (1 mol/163.59 grams) is your equation.

When you multiply these together, grams cancel and you end up with the desired mole-based answer:

4.50000 moles (The extra zeros are to make up for the 6 significant figures in 736.155, feel free to omit them if necessary.)

(pls give brainliest if this helped)

Answer:

C.

Explanation:

Answer:

because of the location of the 6 the answer is 6 cent

Answer:

Hundredths

Explanation:

$6 times 1/$100. The 0 is tenths, the 6 is hundredths and the 1 is thousandths.

Answer:

Skittles are coated with sugar and food coloring. When you add warm water to the Skittles, the sugar and food coloring start to dissolve. They have similar amounts coated on them so they dissolve at similar speeds and stay in their lanes.

The sugar is moving to areas of water with lower sugar concentration. If the water is poured in the center, this is happening for each Skittle at relatively the same speed.

Explanation:

Answer:

6.6242 x 10 ^ 24

Explanation:

This is the correct answer because you know there is 11 oxygen moles in 1 mole of sugar so using dimensional analysis you can solve it. You start will 11 moles of oxygen, and multiply by Avogadro's number(6.022 x 10 ^23) to get the amount of atoms. I don't see it as an answer, but I am confident in this, so I would ask your teacher specifically.

Hope this helps!

Answer:

between metal and nonmetal ions

Explanation:

Answer:

I think it's A but I might be wrong

Explanation:

Answer:

C.  Bending sheet metal.

Explanation:

The metal is still intact.  No change in chemical bonds have occurred.

Burning a candle is converting wax into heat, CO2 and carbon soot.

A rusting bicycle is converting goof iron, Fe, into iron oxide (rust, Fe2O3)

Toasting bread is more difficult to define.  If the bread is just warmed, then it is physical.  If it is toasted (browned/burned), then a few surface molecules have been converted into tasty carcinogens, my favorite poison.

Answer: c

Explanation:

Answer:

tendinitis.

carpal tunnel syndrome.

osteoarthritis.

rheumatoid arthritis (RA)

fibromyalgia.

bone fractures.

Given what we know about Herbig-Haro (HH) objects, we can confirm that they are born from the collision between a jet from a star and clouds of interstellar matter.

Therefore, we can confirm that option b, which states, "where a jet from a star in the process of being born collides with (and lights up) a nearby cloud of interstellar matter", is the correct choice for the question pertaining to Herbig-Haro (HH) objects.

To learn more about interstellar space visit:

https://brainly.com/question/7106246

Given that the volume and mass of a substance are not defining properties, it is entirely possible for two samples with different volumes and mass to be the same substance.

Therefore, since the volume and mass of a substance are not defining properties of a substance, we can confirm that it is entirely possible for two samples with different volumes and mass to be the same substance.

To learn more about properties of elements visit:

https://brainly.com/question/11838894?referrer=searchResults

The frequency of the X - ray is [tex]7.95 \times 10^{28} \ Hz[/tex].

The given parameters:

The frequency of the wave is calculated as follows;

[tex]E = hf\\\\f = \frac{E}{h} \\\\[/tex]

where;

Substitute the given parameters;

[tex]f = \frac{E}{h} \\\\f = \frac{5.27 \times 10^{-5} }{6.626 \times 10^{-34}} \\\\f = 7.95 \times 10^{28} \ Hz[/tex]

Thus, the frequency of the X - ray is [tex]7.95 \times 10^{28} \ Hz[/tex].

Learn more about frequency of radiation here: https://brainly.com/question/13400312

Answer:

A. Motors and generators are opposite processes

Explanation:

B, C, and D are wrong because, the term electrical generator is used to describe a range of devices that convert mechanical energy into electricity. A motor converts electrical energy into mechanical, which is the opposite process to the electrical generator.

Answer

16g

Percent by mass=  mass of solute/mass of solution * 100

Explanation: work out the equation

The mass of nitric acid required to make the given solution is 0.0627 g.

The given parameters:

The hydrogen ion (H⁺) concentration of the nitric acid is calculated as follows;

[tex]H^+ = 10^{-pH}\\\\H^+ = 10^{-2.4}\\\\H^+ = 0.00398[/tex]

The molarity of the nitric acid is calculated as follows;

[tex]= 0.00398 \ H^+ \times \frac{1 \ M \ HNO_3}{1 \ H^+} \\\\= 0.00398 \ M[/tex]

The number of moles of the nitric acid is calculated as follows;

[tex]moles = M\times L\\\\moles = 0.00398\ M \ \times \ \frac{250 \ mL}{1000} \\\\moles = 9.95 \times 10^{-4} \ mol.[/tex]

The molar mass of nitric acid is calculated as;

[tex]HNO_3 = (1) \ + (14) \ + (16 \times 3) = 63 \ g/mol[/tex]

The mass of the nitric acid contained in the calculated number of moles is calculated as;

[tex]mass = moles\ \times \ molar \ mass\\\\mass = 9.95\times 10^{-4} \ mol. \ \times \ 63 \ g/mol\\\\mass = 0.0627 \ g[/tex]

Thus, the mass of nitric acid required to make the given solution is 0.0627 g.

Learn more about molarity of acids here: https://brainly.com/question/13864682

Answer:

yes

Explanation:

Answer:

Yes

Explanation:

Albert Einstein is often cited as one of the most influential scientists of the 20th century. His work continues to help astronomers study everything from gravitational waves to Mercury's orbit

Answer:

Explanation:

3× 22+2×32+ 6×16=

66+64+96=236

It requires one electron to complete its octet

The Lewis dot model of an atom has seven dots. The statement true about atom is,

So, option C is correct one.

The electron/electrons present in valence shell is called valence electrons. Each atoms require eight electrons to complete their octet or valence shell.

To learn more about Lewis dot model here.

https://brainly.com/question/17735032

#SPJ2

Answer:

A dam like structure used to capture energy from masses of water moving in or out of a bay of rivers due to tidal force is called tidal barrage.

Explanation:

It may help you to solve question.

Answer:

The oxidation number for sulfur in SO2 is +4.

Explanation:

To find the oxidation number of sulfur, it is simply a matter of using the formula SO2 and writing the oxidation numbers as S = (x) and O2 = 2(-2) = -4. Using the rule and adding the oxidation numbers in the compound, the equation becomes x +(-4 ) = 0. Solving for x, it is evident that the oxidation number for sulfur is +4.

Answer:

116.64 g

Explanation:

74.23÷14 This is # of moles .

# of moles for co = 5.302

Then mass of co2 = 116.64

The reactant that has been present in excess in the reaction has been NaCl. Thus, option B is correct.

The balanced chemical equation has been:

[tex]\rm NaCl\;+\;AgNO_3\;\rightarrow\;NaNO_3\;+\;3\;AgCl[/tex]

From the balanced equation, for complete utilization of 1 mole of sodium chloride, 1 mole of silver nitrate has been used.

The moles of can be given as:

[tex]\text Moles\;=\;\dfrac{m}{mwt}[/tex]

Where, mass of Silver nitrate, [tex]m=10\;\text g[/tex]

Molecular mass of silver nitrate, [tex]mwt=168\9.87\;\text {g/mol}[/tex]

Substituting the values, moles of silver nitrate has been:

[tex]\rm Moles \;AgNO_3=\dfrac{10}{169.87} \\Moles \;AgNO_3=0.058\;mol[/tex]

Mass of sodium chloride, [tex]m=4\;\text g[/tex]

Molecular mass of sodium chloride, [tex]mwt=58.44\;\text {g/mol}[/tex]

Substituting the values, moles of sodium chloride has been:

[tex]\rm Moles\;NaCl=\dfrac{4}{58.44}\\Moles\;NaCl=0.068\;mol[/tex]

From the balanced chemical equation,

[tex]\rm 1\;moles\;AgNO_3=1\;moles\;NaCl\\0.058\;mol\;AgNO_3=0.058\;mol\;NaCl[/tex]

Since, the available moles of NaCl has been 0.06 mol, and used NaCl has been 0.05 mol. Thus, NaCl has been the excess reactant.  Hence, option B is correct.

For more information about the excess reactant, refer to the link:

https://brainly.com/question/25685654

Answer:

B- NaCl

Explanation:

if this helped could you put this as the brainiest

Answer:

NH4I

..................

I hope it helps

Answer:Ammonium Iodide is a chemical compound with a formula Explanation: nh4l

Locomotion and movement are brought about by skeletal and muscular system of the body. It’s a coordinated event of the skeletal and muscular system brought by contraction and relaxation of muscles.

Locomotion occurs with help of specialised muscles, muscular and non-muscular by nature.

It involves the interaction of muscles (tendons and ligaments) and skeletal joints and cartilage

Locomotion is a voluntary action which require involvement of the nervous system.

In muscles actin and myosin protein forms cross bridges, consuming ATP.

Hence, to bring about locomotion skeletal and are responsible.

Learn more about locomotion.

https://brainly.com/question/13343069    

#SPJ2