help me please like right now as soon as possible write the answer in terms of pi and round the answer to the nearest hundredths place I will give branliest

Answer:

1

Step-by-step explanation:

First of all we use the "law of sines"

to get the measure/length we need the opposing angle of it of the side, now in this case the missing side is x

and its opposing angle is missing so using common sense, the sum of angles in the triangle is 180°

180°=70°+51°+ x

x = 180°-121°

=59°

Using law of sines:

(sides are represented by small letters/capital letters are the angles)

a/sinA= b/sinB= c/sinC

We have one given side which is "9"

so,

9/sin70= x/sin59

doing the criss-cross method,

9×sin59=sin70×x

9×sin59/sin70=x

x=8.2 (answer 1)

I hope this was helpful <3

Since cosine is negative and a is in quadrant III, we know that sine is positive. We can use the Pythagorean identity to solve for sine:

sin^2(a) + cos^2(a) = 1

sin^2(a) + (-5/9)^2 = 1

sin^2(a) = 1 - (-5/9)^2

sin^2(a) = 1 - 25/81

sin^2(a) = 56/81

Taking the square root of both sides:

sin(a) = ±sqrt(56/81)

Since a is in quadrant III, sin(a) is positive. Therefore:

sin(a) = sqrt(56/81) = (2/3)sqrt(14)

In the given triangle, α is equal to 67.36°.

What is a triangle's definition?

A triangle is a two-dimensional closed geometric form that has three sides, three angles, and three vertices (corners). It is the most basic polygon, produced by joining any three non-collinear points in a plane. The sum all angles of a triangle is always 180°. Triangles are classed according to their side length (equilateral, isosceles, or scalene) and angle measurement (acute, right, or obtuse).

Now,

Using Trigonometric functions

We can use the sine function

So,

Sin α=Perpendicular/Hypotenuse

Sin α = 12/13

α=67.36°

Hence,

           The value of α will be 67.36°.

To know more about triangles visit the link

brainly.com/question/2773823

#SPJ1

It depends on the rotational speed of the wheel. To calculate this speed, we need to know the angular velocity of the wheel.

The maximum speed of a point on the outside of the wheel, 15 cm from the axle, if we assume that the wheel is rotating at a constant rate, we can use the formula v = rω, where v is the speed of the point on the outside of the wheel, r is the radius of the wheel (15 cm in this case), and ω is the angular velocity of the wheel. Therefore, the maximum speed of a point on the outside of the wheel would be directly proportional to the angular velocity of the wheel.
The formula to calculate the maximum linear speed (v) is:
v = ω × r
where v is the linear speed, ω is the angular velocity in radians per second, and r is the distance from the axle (15 cm, or 0.15 meters in this case).
Once you have the angular velocity (ω) of the wheel, you can plug it into the formula and find the maximum speed of a point on the outside of the wheel.

Learn more about rotational speed here: brainly.com/question/17025846

#SPJ11

Answer:

a 1053

b 250

multiply 650 by 1.62 for part a.

for part b divide by 1.62 since pound is less than dollar

hope this helps :)

Mambo needs to save R2,322.06 per month to reach her retirement goal of R1,000,000 in 40 years, assuming an annual interest rate of 8% compounded monthly.

Using the formula for the future value of an annuity, we can solve for the monthly payment Mambo needs to make:

[tex]FV = P * [(1 + r/n)^{(nt)} - 1]/(r/n)[/tex]

where FV is the future value, P is the monthly payment, r is the annual interest rate, n is the number of times interest is compounded per year, and t is the number of years.

Given that Mambo has 40 years until retirement, and the interest rate is 8% per year compounded monthly, we can substitute these values into the formula:

[tex]FV = 1,000,000 \\P = ?\\r = 0.08\\n = 12\\t = 40 \\1,000,000 = P * [(1 + 0.08/12)^(12*40) - 1]/(0.08/12)[/tex]

Solving for P, we get:

P = 2,322.06

To know more about annual interest rate, here

brainly.com/question/30573341

#SPJ4

--The complete Question is, Mambo is 25 years old and currently earns R5595 per month. She wants to retire at age 65 and wishes to have R1,000,000 by then. Assuming Mambo can invest her savings at an annual interest rate of 8%, compounded monthly, how much should she save each month to reach her retirement goal?--

Rounding the result off to the nearest 10th, the lateral surface area of the cylinder is 822 inches².

Surface area is the total area of the exposed surfaces of a three-dimensional object. It is measured in square units such as square centimeters (cm2) or square meters (m2). Surface area is an important concept in mathematics, science, and engineering, as it is the total area that determines properties such as friction, heat transfer, and fluid dynamics. For example, a larger surface area can increase the rate of heat transfer and allow for more efficient cooling. Similarly, a larger surface area can increase the friction between two objects, allowing them to grip better. Surface area is also important in chemistry, as it affects the amount of gas or liquid that can be absorbed or released by a given object.

The cylinder has a radius of 11 inches and a height of 12.5 inches. To find the lateral surface area of a cylinder, the formula used is A = 2πrℎ, where r is the radius and h is the height of the cylinder. After plugging in the values, the lateral surface area of the cylinder is 821.75 inches². Rounding the result off to the nearest 10th, the lateral surface area of the cylinder is 822 inches².

To know more about surface area click-
brainly.com/question/16519513
#SPJ1

The length of chord XY is 5√2.

What is the length of the chord?

It is described as the line segment that connects any two points on the circle's circumference without going through the circle's center. As a result, the diameter is the chord of a particular circle that is the longest and goes through its center. In mathematics, determining the chord's length can be crucial at times.

Here, we have

Given: A circle with center O and radius 5 has a central angle XOY. X and Y are points on the circle. ​If the measure of arc XY is 90 degrees.

We have to find the length of chord XY.

∠XOY = 90°

OX = OY = 5

We draw a perpendicular from the center to chord XY bisect XY at D.

Now, since OD bisects ∠XOY

∠XOD = ∠YOD = 90°/2 = 45°

Now, in ΔXOD

sin45° = XD/OX

1/√2 = XD/5

5/√2  = XD...(1)

In ΔYOD

sin45° = YD/OY

5/√2  = YD...(2)

Adding (1) and (2), we get

XD + YD = 5/√2 + 5/√2

XY = 5√2

Hence, the length of chord XY is 5√2.

To learn more about the length of the chord from the given link

https://brainly.com/question/26094865

#SPJ1

Answer:

f(x) is the blue graph, g(x) is the red graph.

x^2 - 3x + 17 - (2x^2 - 3x + 1) = 16 - x^2

16 - x^2 = 0 when x = -4, 4

So the area between these two graphs is (using the TI-83 graphing calculator):

fnInt (16 - x^2, x, -4, 4) = 85 1/3

Step-by-step explanation:

Again, using similar triangle ratios

7.2 m  is to 2.4 m  

     as   AB is to  12.0 m

7.2 / 2.4  = AB/12.0    Multiply both sides of the equation by 12

12 *   7.2 / 2.4   = AB = 36.0 meters

Answer: there is only one number

Answer:

Solo hay un número primo que se puede escribir como suma de dos números primos y también como diferencia de dos números primos.

Espero haber ayudado :D

The current in the circuit when the resistance is 12 ohms is 40 amps.

What is fraction?

A fraction is a mathematical term that represents a part of a whole or a ratio between two quantities.

We can use the inverse proportionality formula to solve this problem, which states that:

current (in amps) x resistance (in ohms) = constant

Let's call this constant "k". We can use the information given in the problem to find k:

24 amps x 20 ohms = k

k = 480

Now we can use this constant to find the current when the resistance is 12 ohms:

current x 12 ohms = 480

current = 480 / 12

current = 40 amps

Therefore, the current in the circuit when the resistance is 12 ohms is 40 amps.

To learn more about fraction from the given link:

https://brainly.com/question/10354322

#SPJ1

Therefore , the solution of the given problem of unitary method comes out to be during the 4-second period, the tram's elevation changed by 3 metres every second.

To complete the assignment, use the iii . -and-true basic technique, the real variables, and any pertinent details gathered from basic and specialised questions. In response, customers might be given another opportunity to sample expression the products. If these changes don't take place, we will miss out on important gains in our knowledge of programmes.

Here,

By dividing the overall elevation change (12 metres) by the total time required (4 seconds),

it is possible to determine the change in the tram's elevation every second. We would then have the average rate of elevation change per second.

=> Elevation change equals 12 metres

=> Total duration: 4 seconds

=>  12 meters / 4 seconds

=> 3 meters/second

As a result, during the 4-second period, the tram's elevation changed by 3 metres every second.

To know more about unitary method  visit:

https://brainly.com/question/28276953

#SPJ1  

Answer:

see the images and explanation

Step-by-step explanation:

for the graph:

the domain 0 < x < 5

the range for each functions:

g(x) = 2x + 1

g(x) = y  ,   1 < y < 11

h(x) = 2x + 2 ,  2 < y < 12

The probability of picking one bolt and one nut is 1/2 or 50%.

To find the probability that one is a bolt and one is a nut, we need to use the formula for calculating the probability of two independent events happening together: P(A and B) = P(A) × P(B)

Let's first calculate the probability of picking a bolt from the box:

P(bolt) = number of bolts / total number of parts = 3/6 = 1/2

Now, let's calculate the probability of picking a nut from the box:

P(nut) = number of nuts / total number of parts = 3/6 = 1/2

Since the events are independent, the probability of picking a bolt and a nut in any order is:

P(bolt and nut) = P(bolt) × P(nut) + P(nut) × P(bolt)

P(bolt and nut) = (1/2) × (1/2) + (1/2) × (1/2)

P(bolt and nut) = 1/2

Therefore, the probability of picking one bolt and one nut is 1/2 or 50%.

Learn more about  probability

https://brainly.com/question/30034780

#SPJ4

the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

To find the probability that one chosen part is a bolt and the other chosen part is a nut, we need to use the formula for probability:

Probability = (number of desired outcomes) / (total number of outcomes)

There are two ways we could choose one bolt and one nut: we could choose a bolt first and a nut second, or we could choose a nut first and a bolt second. Each of these choices corresponds to one desired outcome.

To find the number of ways to choose a bolt first and a nut second, we multiply the number of bolts (3) by the number of nuts (3), since there are 3 possible bolts and 3 possible nuts to choose from. This gives us 3 x 3 = 9 total outcomes.

Similarly, there are 3 x 3 = 9 total outcomes if we choose a nut first and a bolt second.

Therefore, the total number of desired outcomes is 9 + 9 = 18.

The total number of possible outcomes is the number of ways we could choose two parts from the box, which is the number of ways to choose 2 items from a set of 6 items. This is given by the formula:

Total outcomes = (6 choose 2) = (6! / (2! * 4!)) = 15

Putting it all together, we have:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 18 / 15
Probability = 1.2

However, this answer doesn't make sense because probabilities should always be between 0 and 1. So we made a mistake somewhere. The mistake is that we double-counted some outcomes. For example, if we choose a bolt first and a nut second, this is the same as choosing a nut first and a bolt second, so we shouldn't count it twice.

To correct for this, we need to subtract the number of outcomes we double-counted. There are 3 outcomes that we double-counted: choosing two bolts, choosing two nuts, and choosing the same part twice (e.g. choosing the same bolt twice). So we need to subtract 3 from the total number of desired outcomes:

Number of desired outcomes = 18 - 3 = 15

Now we can calculate the correct probability:

Probability = (number of desired outcomes) / (total number of outcomes)
Probability = 15 / 15
Probability = 1

So the probability that one chosen part is a bolt and the other chosen part is a nut is 1, or 100%. This makes sense because if we choose two parts at random, we must get one bolt and one nut since there are three of each in the box.

learn more about probability

https://brainly.com/question/30034780

#SPJ11

The probability that Julian will roll a 3 on the next roll is approximately 16.67%. The probability of rolling a 3 on a normal 6-sided die is independent of the previous rolls. This means that regardless of the outcomes of Julian's previous rolls, the probability remains the same.

Explanation

On a 6-sided die, there is 1 favorable outcome for rolling a 3 (the number 3 itself) out of 6 possible outcomes (1, 2, 3, 4, 5, and 6).

To find the probability, you can use the formula:

Probability = (Number of favorable outcomes) / (Total number of outcomes)

In this case:

Probability of rolling a 3 = 1 (favorable outcome) / 6 (total outcomes)

Probability of rolling a 3 = 1/6 ≈ 0.1667 or 16.67%

So, the probability that Julian will roll a 3 on the next roll is approximately 16.67%.

To learn more about probability : brainly.com/question/27292589

#SPJ11

The profit function of the company is given by P(x)=-4x^3 + 32x^2 - 64, where x is the number of toys sold in hundreds, and P(x) is the profit in thousands of dollars.

The key features of the graph of the profit function are the following:

The degree of the polynomial function is 3, which means that the graph is a cubic curve.

The coefficient of the leading term is negative (-4), which means that the graph opens downwards.

The coefficient of the quadratic term is positive (32), which means that the graph is concave up.

The y-intercept of the graph is -64, which means that the company will incur a loss of $64,000 if it does not sell any toys.

It should be noted that to find the maximum profit, we need to evaluate the profit function at x = 5.33:

P(5.33) = -4(5.33)^3 + 32(5.33)^2 - 64 = 23.78

Therefore, the maximum profit that the company can make is $23,780.

In summary, the graph of the profit function reveals that the company will incur a loss if it does not sell any toys, but it can make a profit if it sells at least some toys. The profit function has a cubic shape that opens downwards, indicating that the profit decreases as the number of toys sold increases beyond a certain point. The maximum profit occurs at x = 5.33, where the profit is $23,780.

Learn more about graph on;

https://brainly.com/question/19040584

#SPJ1

Step-by-step explanation:

+ 1.25

every new term is the previous term + 1.25.

with starting value -1.75

f(n) = 1.25n - 1.75

The two column proof is written as follows

Statement                                                           Reason

MA = XR                                           given (opposite sides of rectangle)

MK = AR                                           given (opposite sides of rectangle)

arc MA = arc RK                               Equal chords have equal arcs

arc MK = arc AK                               Equal chords have equal arcs

An arc is a portion of the circumference of a circle, and a chord is a line segment that connects two points on the circumference.

If two chords in a circle are equal in length, then they will cut off equal arcs on the circumference. This is because the arcs that the chords cut off are subtended by the same central angle.

Learn more on circle theorem at:

https://brainly.com/question/6240879

#SPJ1

The MAD of the hourly wages given would be $ 0.48. The range would be $ 2.00. Q1 would be $8.25. Q3 would then be $9.25. The IQR would be $1.00

Calculate the MAD:

First, find the mean of the data set:

mean = (sum of all values) / (number of values)

mean = (8.25 + 8.50 + 9.25 + 8.00 + 10.00 + 8.75 + 8.25 + 9.50 + 8.50 + 9.00) / 10

mean = 88.00 / 10 = 8.80

Then, find the mean of these absolute deviations:

MAD = (sum of absolute deviations) / (number of values)

MAD = (0.55 + 0.30 + 0.45 + 0.80 + 1.20 + 0.05 + 0.55 + 0.70 + 0.30 + 0.20) / 10

MAD = 4.10 / 10 = 0.41

Calculate the range:

range = maximum value - minimum value

range = 10.00 - 8.00 = 2.00

Find Q1 and Q3:

{8.00, 8.25, 8.25, 8.50, 8.50, 8.75, 9.00, 9.25, 9.50, 10.00}

Q1 is the median of the lower half, and Q3 is the median of the upper half.

Lower half: {8.00, 8.25, 8.25, 8.50, 8.50}

Upper half: {8.75, 9.00, 9.25, 9.50, 10.00}

Q1 = median of lower half = 8.25

Q3 = median of upper half = 9.25

Calculate the IQR:

IQR = Q3 - Q1

IQR = 9.25 - 8.25 = 1.00

Find out more on MAD at https://brainly.com/question/3250070

#SPJ1

For a percentage data of students who play the different game and win the prize, the expected amount to pay for prizes for that booth by the carnival committee is equals to the $218.70.

We have a booth of school carnival in past years, The percentage of students win a stuffed toy = 22%

The percentage of students win a jump rope = 16%

The percentage of students win a t-shirt

= 6%

The winning amount for stuffed toy game = $ 3.60

The winning amount for jump rope game = $1.20

The winning amount for t-shirt game

= $7.90

The remaining students do not win a prize. Now, total number of students play the game at the booth = 150

So, number of students who win stuffed toy = 22% of 150 = 33

Number of students who win jump rope = 16% of 150 = 24

Number of students who win stuffed toy

= 6% of 150 = 9

For determining the expected pay using the simple multiplication formula. Total expected pay for prizes for that booth is equals to the sum of resultant of multiplcation of number of students who play a particular game into pay amount for that game. That is total excepted pay in dollars = 3.60 × 33 + 1.20 × 24 +7.90 × 6

= 218.7

Hence required value is $218.70.

For more information about percentage, visit:

https://brainly.com/question/843074

#SPJ4

The correct statement regarding the null hypothesis is: the null hypothesis claims the opposite of what the researcher believes.

The null hypothesis is the claim that no relationship exists between two sets of data or variables being analyzed. The

null hypothesis is that any experimentally observed difference is due to chance alone, and an underlying causative

relationship does not exist, hence the term "null".

In research, the null hypothesis is a statement of no effect or no relationship between variables, while the alternative

hypothesis represents the effect or relationship the researcher is interested in demonstrating.

The purpose of statistical testing is to determine whether there is enough evidence to reject the null hypothesis in

favor of the alternative hypothesis.

for such more question on null hypothesis

https://brainly.com/question/25263462

#SPJ11

To compute the covariance matrix of the variables in the data, the "matrix-operation" which should be used is ([tex]X^{t}[/tex] × X)/n.

The "Covariance" matrix is defined as a symmetric and positive semi-definite, with the entries representing the covariance between pairs of variables in the data.

The "diagonal-entries" represent the variances of individual variables, and the off-diagonal entries represent the covariances between pairs of variables.

Step(1) : Compute the transpose of the centered data matrix X, denoted as [tex]X^{t}[/tex]. The "transpose" of a matrix is found by inter-changing its rows and columns.

Step(2) : Compute the "dot-product" of [tex]X^{t}[/tex] with itself, denoted as [tex]X^{t}[/tex] × X.

The dot product of two matrices is computed by multiplying corresponding entries of the matrices and summing them up.

Step(3) : Divide the result obtained in step(2) by the number of samples in the data, denoted as "n", to get the covariance matrix.

This step scales the sum of the products by 1/n, which is equivalent to taking the average.

So, the covariance matrix "C" of variables in "centered-data" matrix X can be expressed as: C = ([tex]X^{t}[/tex] × X)/n.

Learn more about Covariance Matrix here

https://brainly.com/question/30481066

#SPJ4

The given question is incomplete, the complete question is

Let X be a matrix of centered data with a column for each field in the data and a row for each sample. Then, not including a scalar multiple, how can we use matrix operations to compute the covariance matrix of the variables in the data?

Event "X or Y": A, B, C, E, G. Event "X and Y": C. The complement of event X: D, E, F, G.

The sample space for this problem is {A, B, C, D, E, F, G}, since there are seven tiles labeled with the first seven letters of the alphabet.

Event X: The letter selected comes before "D". Outcomes in this event are A, B, and C.

Event Y: The letter selected is found in the word "CAGE". Outcomes in this event are A, C, E, and G.

Event "X or Y": Outcomes in this event are any outcomes from event X along with any outcomes from event Y. So the outcomes in the event "X or Y" are A, B, C, E, and G.

Event "X and Y": The outcomes in the event "X and Y" are the outcomes from event Y that also occur in event X. So the only outcome in the event "X and Y" is C.

The complement of event X: The complement of event X is the event consisting of all possible outcomes not in the event X. So the outcomes in the complement of event X are D, E, F, and G.

To know more about complement of event:

https://brainly.com/question/30212841

#SPJ4

--The given question is incomplete, the complete question is given

" A tile is selected from seven tiles, each labeled with a different letter from the first seven letters of the alphabet. The letter selected will be recorded as the outcome. Consider the following events. Event X: The letter selected comes before "D". Event Y: The letter selected is found in the word "CAGE". Give the outcomes for each of the following events. If there is more than one element in the set, separate them with commas.

(a) Event "X or Y":

(b) Event "X and Y":

(c) The complement of the event X: "--

Step-by-step explanation:

hope this will help you Thanks

The probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen.

To find the probability that a randomly selected carton has a puncture or a smashed corner, we can use the formula:

P(puncture or smashed corner) = P(puncture) + P(smashed corner) - P(puncture and smashed corner)

where P(puncture) is the probability of a carton having a puncture, P(smashed corner) is the probability of a carton having a smashed corner, and P(puncture and smashed corner) is the probability of a carton having both a puncture and a smashed corner.

Substituting the given probabilities into the formula, we get:

P(puncture or smashed corner) = 0.03 + 0.06 - 0.014

P(puncture or smashed corner) = 0.076

Therefore, the probability that a randomly selected carton has a puncture or a smashed corner is 0.076, or 7.6%.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

Answer:

14

Step-by-step explanation:

c = 2[tex]\pi r[/tex]

c = 2[tex]\pi[/tex]7

x = 14[tex]\pi[/tex]

Helping in the name of Jesus.