HELP ME IM NOT GOOD THAT THIS :))))

HELP ME IM NOT GOOD THAT THIS :))))

Answers

Answer 1
Phosphorus the third one

Related Questions

Shanika is an engineer at an amusement park who is experimenting with changes to the setup for a magnetic roller coaster ride. In one ride, there are two identical roller coaster cars (orange and green) that start on opposite sides of a large magnet located at the center of a station. Shanika wants to get the largest increase in potential energy she can by moving one car one space to the left or the right.


Shanika can move the orange car to point A or point B, or she can move the green car to point C or point D. Which movement should she make? Why will that movement result in the largest increase in potential energy? Describe the magnetic force that will act on the roller coaster car she moves.

Answers

Answer:

I believe it might be point A since the question ask what will result in the ln a largest increase in potential energy

Explanation:

point A since the question ask what will result in the ln a largest increase in potential energy

What are the types of energy ?

The energy can be defined as  ability to work or produce action and / or movement and manifests itself in many different ways, such as body movement, heat, electricity, etc.

The different types of energy include Kinetic energy which is associated with the movement of bodies. Potential energy which is  stored by virtue of a body's position relative to its surface is also called gravitational potential energy.

Thermal Energy or Heat can be defined as the energy  associated with the kinetic energy of the molecules that make up an element, it can be manifested if there is a temperature difference between two bodies.

Chemical energy released or formed from chemical reactions, Solar energy from sunlight. This form of energy is used to generate electricity through photovoltaic plates, for example.

For more details regarding energy, visit

brainly.com/question/28869293

#SPJ2

Two carts, A and B, are connected by a spring and sitting at rest on a track. Cart A has a mass of 0.4 kg and Cart B has a mass of 0.8 kg. The spring is released and causes the two carts to push off from each other. Which of the following correctly compares the motion and forces acting on the two carts?

A. Cart A experiences a greater force but has the same speed as Cart

B. Cart A experiences a greater force and has a greater speed after the recoil.

C. Both carts experience the same force but Cart A has a greater speed after the recoil.

D. Both carts experience the same force and have the same speed after the recoil.

Answers

Both carts experience the same force but Cart A has a greater speed after the recoil.

The given parameters;

Mass of the cart A = 0.4 kgMass of the cart B = 0.8 kg

Apply the principle of conservation of linear momentum to determine the velocity of the carts after collision;

[tex]m_Av_0_A\ + m_Bv_0_B = m_Av_f_A \ + m_Bv_f_B\\\\the \ initial \ velocity \ of \ both \ carts = 0\\\\0.4(0) + 0.8(0) = 0.4v_f_A + 0.8v_f_B\\\\0 = 0.4v_f_A + 0.8v_f_B\\\\0.4v_f_A = -0.8v_f_B\\\\v_f_A= \frac{-0.8 v_f_B}{0.4} \\\\v_f_A = - 2 \ v_f_B \ \ m/s[/tex]

According to Newton's third law of motion, action and reaction are equal and opposite. The force exerted on cart A is equal to the force exerted on cart B but in opposite direction.

[tex]F_A = -F_B[/tex]

Thus, the correct statement that compares the motion and forces acting on the two carts is "Both carts experience the same force but Cart A has a greater speed after the recoil."

Learn more about conservation of linear momentum here: https://brainly.com/question/7538238

which statement is not correct about force.

A, force causes deformation
B, force xauses accleration
C, if there is no force, there is no motion
D, force emerges due to interaction.​

Answers

Answer:

c

Explanation:

without force motion won't take place

2. What do aerospace engineers do? (1 point)
O design dams
O design machines
O design planes
O design cars

Answers

aerospace engineers design planes
They Design planes yeah

the system shown above is released from rest. if friction is negligible, the acceleration of the 4.0 kg block sliding on the table shown above is most nearly

Answers

The acceleration of the first block (4 kg) is -9.8 m/s².

The given parameters:

Mass of the first block, m₁ = 4.0 kgMass of the second block, m₂ = 2.0 kg

The net force on the system of the two blocks is calculated as follows;

[tex]m_2 g - T = m_1 a[/tex]

where;

T is the tension in the connecting string due weight of the first block

[tex]m_2 g - m_1 g = m_1 a\\\\a = \frac{m_2 g - m_1g}{m_1} \\\\a = \frac{g(m_2 - m_1)}{m_1} \\\\a = \frac{9.8(2-4)}{2} \\\\a = -9.8 \ m/s^2[/tex]

Thus, the acceleration of the first block (4 kg) is -9.8 m/s².

Learn more about net force on two connected blocks here: https://brainly.com/question/13539944

what is the potential energy of a 2kg plant that is on a windowsill 1.3 m high?

what is the kinetic energy of a 7.26 kg bowling ball that is rolling at a speed of 2 m/s

an apple as 6 J of energy. the apple sits on a counter 3 m high. what is the mass of the apple/

Answers

Answer:

25.48

Explanation:

Which statement most completely describes a Lewis electron dot diagram? A.
a representation of the electrons that form bonds in a molecule
B.
a representation of the total number of electrons in an element, compound, or ion
C.
a representation of the total number and arrangement of electrons in an element, compound, or ion
D.
a representation of the arrangement of valence electrons in an element, compound, or ion

Answers

Answer:

D.

Explanation:

it is indeed a representation of how the valence electrons in an element,coumpound, or ion are arranged.

to ensure you i was just quized on this and D is the correct anwser

A representation of the arrangement of valence electrons in an element, compound, or ion -  statement most completely describes a Lewis electron dot diagram. Hence, option (D) is correct.

What is Lewis electron dot diagram?

If the compound's molecular formula is known, electron dot structures or Lewis dot formulas can be drawn.

It describes the type of bond and the placement of the atoms within the molecule that are joined together. In honor of American chemist Gilbert Newton Lewis, molecules are depicted as having a Lewis electron dot structure or simply a Lewis structure.

Lewis dot structures, also known as electron dot structures, are schematics that show the interatomic chemical bonds in a molecule. Additionally, they show how many lone pairs there are overall in each of the atoms that make up the molecule. Common names for Lewis dot structures include electron dot structures and Lewis structures. Lewis described an acid as an electron pair acceptor, while a base is an electron pair giver.

Learn more about  Lewis electron dot diagram here:

https://brainly.com/question/19093827

#SPJ2

what is the magnitude of the force exerted on the bottom of the bottle?

Answers

My answer is in the pic
Help me and mark as brainliest plz

Halpinium metal (Jh(s)) can lose electrons via the photoelectric effect. The binding energy for Jh is 2.25x10-19 J. If a photon having an energy of 4.52x10-19 J strikes the surface of halpinium, calculate the de Broglie wavelength (in nm) of the electron that is ejected.

Answers

The relationship of the photoelectric effect and the de Broglie expression allows us to find the result for the wavelength of the ejected electrons is:

Wavelength of de Broglie is λ= 1.03 10⁻⁹m

The photoelectric effect was explained by Einstein assuming that the light rays behave like particles called photons, therefore the

                 [tex]E_{photon} = K + \Phi[/tex]  

where [tex]E_{photon}[/tex] is the energy of the photon given by the Planck relation, K is the kinetic energy of the ejected electrons and Ф the work function of the material.

The Planck relationship states that the energy of the photons is proportional to the frequency.

            [tex]E_{photon} = h f[/tex]

Where h is Planck's constant and f is the frequency of the photons.

They indicate The work function is Ф= 2.25 10⁻¹⁹ J, the energy of the photon [tex]E_{photon}[/tex] = 4.52 10⁻¹⁹ J, let's find the kinetic energy of the ejected electrons.

            [tex]K = E_{photon} - \Phi[/tex]  

Let's calculate.

           K = (4.52-2.25) 10⁻¹⁹

           K = 2.27 10⁻¹⁹ J

Kinetic energy is the energy of motion and is given by the relationship.

          [tex]K = \frac{p^2}{2m}[/tex]  

The wave-particle duality was established by de Broglie with the relation.

         [tex]p = \frac{h}{\lambda }[/tex]  

Let's replace.

         [tex]K = \frac{1}{2m} (\frac{h}{\lambda} )^2 \\\lambda^2 = \frac{h^2}{2m K}[/tex]

       

let's calculate.

        [tex]\lambda^2 = \frac{(6.63 \ 10^{-34})^2 }{2 \ 9.1 \ 10^{-31 } \ 2.27 \ 10^{-19}}[/tex]

        [tex]\lambda = \sqrt{1.06397 \ 10^{-18}}[/tex]

        λ  = 1.03 10⁻⁹m

In conclusion with the relationship of the photoelectric effect and the de Broglie expression we can find the result for the wavelength of the ejected electrons is:

Wavelength of de broglie is:  λ  = 1.03 10⁻⁹m

Learn more about the photoelectric effect here: brainly.com/question/25730863

which is the following is a modern method used to pressure food

1. sprey drying

2.salting

3. smoking

4. Honey​

Answers

Answer:

1. Spray Drying

Explanation:

it is the most modern

HEELPPPP!! A train travels 195 kilometers in 4.0 hours, and then 125 kilometers in 3.0 hours. What is its average speed?

Answers

Answer:

Train A has a speed 20 miles per hour greater than that of train B. If train A travels 300 miles in the same times train B travels 220 miles, what are the speeds of the two trains?

2. A woman has a total of $13,000 to invest. She invests part of the money in an account that pays 11% per year and the rest in an account that pays 12% per year. If the interest earned in the first year is $1490 how much did she invest in each account?

Explanation:

Can someone help with 25 to 28 it’s multiple-choice!

Answers

Answer:

25:speed

26:acceleration

27:scalar

28:kinetic

advantages of writing very large and very small numbers in the terms of power of ten​

Answers

Answer:

Large numbers might create fuse, be confusing and if you miss even one of the zeros it is a very big deal in a situation when you are making a spaceship. Hope this answers your questions :) Merry Christmas. Have fun.

Explanation:

2

Explanation:

for saving space in large numbers

and small numbers for multiplying easily

The gravitational potential energy of a cucumber-harth system changes when which factor changes?

A) the cucumber's speed
B) the cucumber's mass
c) the cucumber's temperature
D) the length

Answers

The cucumbers mass.

If it’s heavier, the gravitational pull will bring it down faster.

Guys No one's answering my question so sad! Once again I'm asking the same question –Here


Chapter Name :- Vector

Question :- A car is moving at Vc speed. Rain is falling vertically at a speed of 10 m / s. What is the value of Vc in this case,if the front glass of the car will get wet? Answer :- Vc ≥ 10


Once again, I need Explanation! If you don’t know then no need to answer! ​

Answers

For the front glass of the car to get wet, [tex]V_c \geq 10 \ m/s[/tex].

The given parameters:

Speed of the car, = VcSpeed of the rain, = 10 m/s

The relative velocity of the car with respect to the falling rain is calculated as;

[tex]V_{C/R} = V_C- V_R[/tex]

If the speed of the car equals the speed of the rain, the rain will fall behind the car.If the speed of the rain is greater than speed of the car, the rain will fall far in front of the car.If the speed of the car is greater than speed of the rain, the rain will fall on the car.

Thus, for the front glass of the car to get wet, [tex]V_c \geq 10 \ m/s[/tex].

Learn more about relative velocity here: https://brainly.com/question/17228388

how is the physical property of density calculated?

Answers

Answer:

The formula for density is d=M/V

Explanation:

where d is density, M id mass, V is volume.

you push on a 24.5kg bag of sand and give it an acceleration of 2.30 m/s ^s. what is the magnitude of the force the bag returns …

Answers

Answer:

Below in bold.

Explanation:

Newton's Second Law:

Force = mass * acceleration

So

Force = 24.5 * 2.3

= 56.35 Newtons.

how can I make a square fit in a triangle hole

Answers

cut the square and make it a triangle

1. A block with a mass of 5.0 kg is pushed on a frictionless surface by applying a horizontal force of 80.0 N. The block starts from rest, and its final velocity is 12.6 m/s. ​

Answers

Answer:

397 j

Explanation:

Because 5.0kg yuh

The kinetic energy of the block with a mass of 5.0 kg is pushed on a frictionless surface by applying a horizontal force of 80.0 N. The block starts from rest, and its final velocity is 12.6 m/s is 396.9 J.

What is kinetic energy?

A moving item or particle has a certain kind of power called kinetic energy. When an item exerts a net force to perform work, which involves the transfer of energy, the object accelerates and as a result, gains kinetic energy.

The amount of kinetic energy that a moving object or particle possesses is determined by both its mass and rate of motion. Any combination of vibration, axis rotation, translation (or movement along a path from one location to another), and translation are all possible motion types.

Given:

The mass of the block, m = 5 kg,

The horizontal force, F = 80 N,

The velocity of the block, v = 12.6 m / s,

Calculate the kinetic energy by the formula given below,

[tex]KE = 1/2mv^2[/tex]

KE = 1 / 2 × 5 × 12.6²

KE =  1 / 2 × 5 × 158.6

KE = 396.9 J

Therefore, the kinetic energy of the block with a mass of 5.0 kg is pushed on a frictionless surface by applying a horizontal force of 80.0 N. The block starts from rest, and its final velocity is 12.6 m/s is 396.9 J.

To know more about Kinetic energy:

https://brainly.com/question/999862

#SPJ2

The complete question is A block with a mass of 5.0 kg is pushed on a frictionless surface by applying a horizontal force of 80.0 N. The block starts from rest, and its final velocity is 12.6 m/s. ​Find its kinetic energy?

can you fit all the planets between earth and moon

Answers

Answer: No, planets of our solar system, with or without Pluto, cannot fit within the mean lunar distance. An additional 3,500 km is needed to squeeze in Neptune

State one use and one disadvantage of the expansion of materials when they are heated.
use
disadvantage

Answers

An example of the use of expansion of materials when they are heated is in

Thermometers. Thermometer is an instrument which is used to measure the

temperature of a place.

It contains mercury which expands as temperature increases. This is used

to accurately determine the temperature of an object.

The disadvantage of expansion of materials when they are heated can be

seen in roads as there is expansion of the surface as a result of heat

exposure leads to roads being rough thereby incurring more costs for

repairs.

Read more about Heat expansion on https://brainly.com/question/1166774

The rays travelled from AIR to an unknown substance. Calculate the n value and
determine the unknown by following these steps: {6 marks}
Medium
n
air
water
ethanol
quartz glass
crown glass
flint glass
ruby
zircon
diamond
1
1.33
1.37
1.47
1.52
1.58
1.54
1.92
2.42
a. On your PAPER calculate n for the unknown value using Ray #1. Type in your
final answer to the electronic box. On paper, ensure #6 is written beside the
calculations.
b. Using the table provided, determine what material was used in the dish to
ar bu
ano below

Answers

Answer:

So what you do is you add all of them then you put an n with the answer.

Explanation:

The average distance between the Earth and the Moon is 384,000,000 meters. What is the distance in kilometers?

Answers

Answer:

384000

Explanation:

it would be 384000 in km

384000
Because 1 meter is 0.001 kilometer so you multiply 384000000 times 0.001

Which model below shows the positions of the Sun, Moon, and Earth that have the greatest effect on ocean tides?

Answers

Answer:

Below!

Explanation:

Referring to the picture, we can conclude that the picture J will have the most effect on ocean tides.

Whichever model is similar to model J in the picture will be your answer.

Hoped this helped.

“Applications of thermal expansion in solids, liquids and gases.”
(Two for each states of matter)​

Answers

Thermal expansion is the tendency of matter to change its shape dimensions, density in response to a change in temperature.

The following are applications of thermal expansion in various matter.SolidsThe principle of thermal expansion is used in thermostat to regulate the temperature of heating device e.g Electric pressing Iron.Rivets are used to hold steel plates together very tightly.

 

  2. Gases

Hot-air balloons are an application of thermal expansionGases turbine

    3. Liquids

Engine CoolantsVolume of thermometer

Learn more about Expansion of matter here:

https://brainly.com/question/518065

A hockey player hits a rubber puck from one side of the rink to the other. It has a mass of .170 kg, and is hit at an initial speed of 6 m/s. If the rink is 61 meters long, how fast is the puck moving when it hits the far wall?

Answers

By using third law of equation of motion, the final velocity V of the rubber puck is 8.5 m/s

Given that a hockey player hits a rubber puck from one side of the rink to the other. The parameters given are:

mass m =  0.170 kg

initial speed u = 6 m/s.

Distance covered s = 61 m

To calculate how fast the puck is moving when it hits the far wall means we are to calculate final speed V

To do this, let us first calculate the kinetic energy at which the ball move.

K.E = 1/2m[tex]U^{2}[/tex]

K.E = 1/2 x 0.17 x [tex]6^{2}[/tex]

K.E = 3.06 J

The work done on the ball is equal to the kinetic energy. That is,

W = K.E

But work done = Force x distance

F x S = K.E

F x 61 = 3.06

F = 3.06/61

F = 0.05 N

From here, we can calculate the acceleration of the ball from Newton second law

F = ma

0.05 = 0.17a

a = 0.05/0.17

a = 0.3 m/[tex]s^{2}[/tex]

To calculate the final velocity, let us use third equation of motion.

[tex]V^{2}[/tex] = [tex]U^{2}[/tex] + 2as

[tex]V^{2}[/tex]  = [tex]6^{2}[/tex] + 2 x 0.3 x 61

[tex]V^{2}[/tex] = 36 + 36

[tex]V^{2}[/tex] = 72

V = [tex]\sqrt{72}[/tex]

V = 8.485 m/s

Therefore, the puck is moving at the rate of 8.5 m/s (approximately) when it hits the far wall.

Learn more about dynamics here: https://brainly.com/question/402617

if a big person and a small person run up the stairs at the same time who has more force

Answers

Answer:

a big person

Explanation:

because the big person exerts more force over the same distance

Answer:

the big person exerts the largest force on the stairs because he weighs more

Explanation:

this question answer is ☝️☝️

A passenger of mass 90kg is involved in a minor car crash. The car approaches a solid barrier at 32m/s. It crashes into the barrer and stops in 0.2s. Determine the impulse that must be applied to the car to bring it to rest

Answers

Answer:

I hope this helps:)

Explanation:

good luck:)

which constellation is in contrast with ursa major

Answers

Answer: Ursa Major (/ˈɜːrsə ˈmeɪdʒər/; also known as the Great Bear) is a constellation in the northern sky, whose associated mythology likely dates back into prehistory. Its Latin name means "greater (or larger) she-bear," referring to and contrasting it with nearby Ursa Minor, the lesser bear.

Bordering constellations: Draco; Cameloparda...

Brightest star: ε UMa (Alioth) (1.76m)

Meteor showers: Alpha Ursa Majorids; Leonid...

Symbolism: the Great Bear

What does the risk of biological harm from radiation depend on?

Answers

Answer:

The effects of radiation depend on the type, energy, and location of the radiation source, and the length of exposure.

Other Questions
What did Frederick Douglass identify as a problem with the way the us government emancipated the slaves? You can use emails when you want to check in on the status of a project or communicate last-minute requests.TrueFalse I will mark brainly, help me with this question please. For this item, complete the choice matrix by clicking the appropriate answer in each row.Determine whether each unit rate is equivalent or not equivalent to EquivalentNot Equivalentthe unit rate, in inches per year, of growing inch in of a yearthe unit rate, in lessons per hour, of finishing of a lesson in hoursthe unit rate, in miles per hour, of jogging 1/8 mile in 3/8 hour ur mom walked into a store and got milk what economic gaps exist between african americans and whites How is suspense created for the reader in this passage. Tyler bought 14 tickets to a basketball game. The group rate saved him $5.25 per ticket. He paid a total of $283.50 for the tickets.What was the regular price of a ticket to the game?Enter your answer in the box Which type of verb is underlined inthis sentence?I am eating pizza with my friends.A. Action VerbB. Linking VerbC. Helping and Action Verb Which of all the U.S. presidents was the most successful in his term(s)? SPANISH SPEAKERS BEED HELP ASAPSoy Mayte. En el restaurante tomo caf. En la mesa tengo el plato y la taza.Based on the text, qu pide Mayte al mesero antes de before > comer?OMesero, la cuenta, por favor.OMesero, buen provecho.OMesero, necesito la cuchara.Mesero, necesito la taza. What is the value of -2 If you cross two organisms that are heterozygous for a trait, what percent ofthe offspring would you expect to express the recessive phenotype? Which of the following tables represents a function?X 6 6 7 7y 2 -2 3-3x 2-2 3-3y 5 5 7 7x 3 -3 3-3y 6 7 8 9X 4 4 5 5y 1 2 3 4 Based on what you have read of A Brothers Quest, how do you expect Alexander to respond to the events of the play? A. Alexander will come to accept Niall's guilt and confront him as the true thief. B. Alexander will give in to fear and frame Niall to avoid trouble with Lord Vanderpool. C. Alexander will continue to feel doubtful and decide to let events take their course. D. Alexander will maintain his loyalty, and search out and investigate another suspect. How do the different auto loan factors impact monthly payments? 58. What is the equation that best represents the graph (0,5) (3, 3) (6, 1) The steps to building a positive reputation are: Admit your faults, sincerely apologize for your past, make pledges to change for the better, and what?Need answer ASAP please and thank you Find the zeros of this polynomial:p(x)= (x+4x+3)(x-4) which of the following 1920s topics frequently appeared in the writing of the lost generation? select the two correct answers.