Answer:
Current in resistors = 1.5 amp
Current in resistors = 0.18 amp
P = 93.75 watts
Explanation:
Given:
1. Three 5 ohm resistor(series)
Voltage = 10 volt
2. Three 5 ohm resistor(parallel)
Voltage = 9 volt
3. Three 5 ohm resistor(series)
Voltage = 6 volt
Find:
Current in resistors
Current in resistors
Total power of circuit
Computation:
1. Total resistor (Series) R = R1 + R2 + R3
Total resistor (Series) R = 5 + 5 + 5
Total resistor (Series) R = 15 ohm
I = V/R
Current in resistors = (15)/(10)
Current in resistors = 1.5 amp
2. Total resistor (Series) R = 1/[1/R1 + 1/R2 + 1/R3
Total resistor (Series) R = 1[1/5 + 1/5 + 1/5]
Total resistor (Series) R = 1.67 ohm
I = V/R
Current in resistors = (1.67)/(9)
Current in resistors = 0.18 amp
3. Total resistor (Series) R = R1 + R2 + R3
Total resistor (Series) R = 5 + 5 + 5
Total resistor (Series) R = 15 ohm
I = V/R
I = (15)/(6)
I = 2.5 amp
P = I²(R)
P = (2.5)²(15)
P = 93.75 watts
Chemical energy may be released during a chemical reaction in the form of heat ..... True or false?
Answer:
heat and gas sometimes so true
please helppp:((( PLEASEEEEE
Answer:
is the amount of matter in this object
Explain how the fountain pen is filled up with ink
Answer:
It is because of air pressure
Explanation:
Filling a fountain pen with ink involves various methods, but the most common approach uses a piston or converter mechanism.
To begin, the pen is prepared by removing the cap and separating the barrel from the grip section. The type of filling system is checked, whether it's a built-in piston or a removable converter.
For a piston-filling method, the knob is twisted counterclockwise to retract the piston. The nib is submerged in the ink bottle, and by turning the knob clockwise, the piston extends, creating a vacuum that draws ink into the reservoir through capillary action.
The piston is then retracted, sealing the ink inside. In the case of a converter, it is removed from the grip section and dipped into the ink bottle, followed by operating the plunger or squeezing to expel air.
Releasing the plunger allows ink to enter the converter through atmospheric pressure. After cleaning any excess ink, the pen is reassembled.
Know more about fountain pen:
https://brainly.com/question/17340241
#SPJ4
Someone please help me...
the distance from the Earth to the sun equals 1 AU. Neptune is 30 AU from the sun. How far is Neptune from the Earth?
Answer:
1 astronomical unit, or AU, is the average distance from the Earth to the Sun; that's about 150 million km. So, Neptune's average distance from the Sun is 30.1 AU. Its perihelion is 29.8 AU, and it's aphelion is 30.4 AU.
Short Answer: it is 29
Explanation:
sorry if its wrong
Answer:
29
Explanation:
I just took a test! not only that but the other person who answered this question had the corrected answer.
Guys can you please help me with this
Please answer the one you know!
which plate is made up almost entirely of oceanic crust
A. south American plate
B. Eurasian plate
C. indo-Australia plate
D. Pacific plate
Answer:
D. Pacific Plate
Explanation:
Answer:
d
Explanation:
i got it right
Can someone help me here
Answer:
1. grass Can survive by itself because it is not dependent on food, it is self-sustaining. and since grass it's not dependent on food it is a producer.
2. and 3. they would all decrease, since the prairie dogs are herbivores they eat basically plants such as grass and if half of the grass is gone then they would have less to eat and therefore decrease.
since ferrets eat prairie dogs, if the prairie dogs population decreases the ferrets would have less to eat and therefore decrease as well.
one of the predators of ferrets are foxes and if the ferrets decrease then the fox would also decrease since it will have less to eat.
4. if we would continue advancing years soon the ferret, prairie dogs and foxes would be no more because if there is less grass they would keep on decreasing over the years until they would be extinct.
An empty container is filled with helium to a pressure P at a temperature T. Neon, which has atoms that are 5 times more massive than those of helium, is then added to the container until the new pressure in the container is 2P at the same temperature T. The ratio of the average speed of the helium atoms to the average speed of the neon atoms is:_________
a. 25 to 1
b. 5 to 1
c. 5to 1
d. 2to 1 E
e. 1 to 1
The ratio of the average speed of the helium atoms to the average speed of the neon atoms is 5 to 1 C.
We have that for the Question, it can be said that the ratio of the average speed of the helium atoms to the average speed of the neon atoms is
5:1
Option B
From the question we are told
An empty container is filled with helium to a pressure P at a temperature T. Neon, which has atoms that are 5 times more massive than those of helium, is then added to the container until the new pressure in the container is 2P at the same temperature T. The ratio of the average speed of the helium atoms to the average speed of the neon atoms is:_________
a. 25 to 1
b. 5 to 1
c. 5to 1
d. 2to 1
e. 1 to 1
Generally the equation for the average speed of Molecules is
mathematically given as
[tex]For Helium\\\\C_h=\frac{8P_hV_h}{\pim_h}\\\\Neon gas\\\\C_n=\frac{8P_nV_n}{\pim_n}\\\\Where\\\\Ph=P_n\\\\Vh=Vn\\\\[/tex]
[tex]\frac{C_h}{C_n}=\frac{\frac{8P_hV_h}{\pim_h}}{\frac{8P_nV_n}{\pim_n}}[/tex]
[tex]\frac{C_h}{C_n}=\sqrt{\frac{\frac{1}{5}}{{\frac{1}{5}}}[/tex]
[tex]\frac{C_h}{C_n}=\sqrt{\frac{5}{1}[/tex]
Therefore
The ratio of the average speed of the helium atoms to the average speed of the neon atoms is
5:1
For more information on this visit
https://brainly.com/question/23379286
Help please & actually answer thank youu :)
Answer:
highest KE and lowest GPE = Dhighest GPE and lowest KE = Asome KE and some PE = BThe sensor on a door for a home security system consisted of a small coil of wire
embedded in the doorframe, and a small steel disk on the door opposite the coil.
When the door was opened, what characteristic of the coil changed for the home
security system?
Answer:
Probably electromagnetism
Explanation:
When the door is closed, the steel disk on the door is in close proximity to the coil of wire in the doorframe. This creates a magnetic field around the coil, which induces a small current in the coil.
What is the magnetic field?Ampere's law, which says that the magnetic field created by a current-carrying wire is proportional to the current and inversely proportional to the distance from the wire, may be used to describe the magnetic field produced by a long straight wire carrying a current.
When the door is opened, the steel disk moves away from the coil, which causes the magnetic field to weaken. As a result, the current induced in the coil decreases. This change in current is detected by the home security system as a change in the magnetic field and is interpreted as the door being opened.
In other words, the characteristic of the coil that changes when the door is opened is the amount of current induced in it. The decrease in the magnetic field as the steel disk moves away from the coil results in a decrease in the induced current, which signals to the home security system that the door has been opened.
Learn more about the magnetic field here:
https://brainly.com/question/15301765
#SPJ6
a solid sphere and a hollow sphere with equal mass are rotated about an axis through their centers. both spheres experience equal torque. which sphere will reach a speed of 10 rad/s first? Explain your answer.
Answer:
Solid sphere
Explanation:
According to the given situation, the solid sphere would contain the less moment of inertia because it would carry large mass that closed to the axis of rotation
Also if there is a less moment of inertia so there would be high angular acceleration under a torque
α = τ/I
So the solid sphere would reach a speed of 10 rad/s first
Which one of the statements below is true about mechanical waves?
They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.
Answer:
The answer is B
Explanation:
Which one of the statements below is true about mechanical waves?
They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.
Explain how grality and electric charge are different
What is the angle of refraction for a beam of light moving from a prism to air if the angle of incidence is 30° and the prism’s index of refraction is 1.6?
Answer:
Refraction involves passing through a boundary (choice a) and changing speed (choice ... A ray of light in air is incident on an air-to-glass boundary at an angle of 30. ... If the index of refraction of the glass is 1.65, what is the angle of the refracted ray ... The critical angle is the angle of incidence (which is always in the more ...
Explanation:
. Monochromatic light illuminates two slits that are 0.33 mm apart. The adjacent bright lines of the interference pattern on a screen 2.30 m away from the slits are 0.44 cm apart. What is the wavelength of the light
Answer:
the wavelength of the light is 6.313 × 10⁻⁷ m
Explanation:
Given the data in the question;
for a double slit interference;
θ = nλ/d
for adjacent lines
θ = λ/d
and d = 0.33 mm = 0.00033 m
and θ = 0.44 × 10⁻² m / 2.30 m
so
λ = θ × d
λ = ( 0.44 × 10⁻² m / 2.30 m ) × 0.00033 m
λ = 0.001913043478 × 0.00033 m
λ = 6.313 × 10⁻⁷ m
Therefore, the wavelength of the light is 6.313 × 10⁻⁷ m
Which climate zone has hot summers, cold winters, and average amounts of precipitation throughout the year?
A. Equator
B. Polar
C. Temperate
D. Tropical
Answer:
i believe its temperate
Explanation:
The climate zone that has hot summers, cold winters, and average amounts of precipitation throughout the year is the temperate climate zone. So, option C is correct.
What is meant by climatic zone ?Climatic zones are defined as the areas that have different climatic conditions over the world.
Here,
The climate zone that hot summers, cold winters and average amounts of precipitation throughout the year is the temperate climate zone.
The temperate climate zones are the areas that have mild temperature condition that are located between the subtropical and the polar regions. These are zones with moderate rainfall that is throughout the year. The temperature in this zone will change greatly between the summer and winter seasons. These zones are hotter during the summer and very cold during the winter.
The temperate zone has an average precipitation of 800 mm.
Hence,
The climate zone that has hot summers, cold winters, and average amounts of precipitation throughout the year is the temperate climate zone.
To learn more about climate zone, click:
https://brainly.com/question/1080277
#SPJ2
a disk of radius 10 cm speeds up from rest. it turns 60 radians reaching an angular velocity of 15 rad/s. what was the angular acceleration?
b. how long did it take the disk to reach this velocity?
Answer:
a) α = 1.875 [tex]\frac{rad}{s^{2} }[/tex]
b) t = 8 s
Explanation:
Given:
ω1 = 0 [tex]\frac{rad}{s}[/tex]
ω2 = 15 [tex]\frac{rad}{s}[/tex]
theta (angular displacement) = 60 rad
*side note: you can replace regular, linear variables in kinematic equations with angular variables (must entirely replace equations with angular variables)*
a) α = ?
(ω2)^2 = (ω1)^2 + 2α(theta)
[tex]15^{2}[/tex] = [tex]0^{2}[/tex] + 2(α)(60)
225 = 120α
α = 1.875 [tex]\frac{rad}{s^{2} }[/tex]
b)
α = (ω2-ω1)/t
t = (ω2-ω1)/α = (15-0)/1.875 = 8
t = 8 s
a
Ten 2.2 v cells each having an internal
resistance of o.1ohms in are connected in series
to a load of 21ohm. Determine
pd at the battery terminals
Answer:
22Volts
Explanation:
The pd at the terminal is known as the emf
Since there are Ten 2.2V cells
Terminal voltage = number of cells * pd of one cell
Terminal voltage = 10 * 2.2
Terminal voltage = 22V
Hence the pd at the battery terminals is 22Volts
Which lists the springs in order of increasing spring constant?
W, Y, X, Z
OW, Y, Z, X
O Z, X, Y, W
OX,Z,Y, W
Answer:
is there supposed to be a picture?
Explanation:
The correct order of the springs in increasing spring constant is: W, Y, X, Z. The correct option is A.
What is the spring constant?Spring constant, also known as force constant or stiffness, is a measure of the resistance of a spring to deformation when a force is applied to it. It is defined as the amount of force required to stretch or compress a spring by a given distance.
The formula for the spring constant is:
k = F/x
Where
k = is the spring constant,
F = is the applied force,
x =is the displacement or deformation of the spring.
The unit of spring constant is newtons per meter (N/m) in the SI system of units, or pounds per inch (lb/in) in the Imperial system.
A higher spring constant means that a spring is stiffer and requires more force to be stretched or compressed by a given distance. A lower spring constant means that a spring is more flexible and requires less force to be stretched or compressed by a given distance. The spring constant is an important property of springs, which are used in various applications, such as in suspension systems, mattresses, and mechanical watches.
Here in the Question,
In order to determine the order of increasing spring constant, we need to compare the given springs and see which one requires more force to stretch or compress.
Therefore, The correct order of the springs in increasing spring constant is: W, Y, X, Z. This is because the spring constant increases as we move from W to Z.
To learn about Strain gauges click:
https://brainly.com/question/31172851
#SPJ7
A standard 1kilogram weight is a cylinder 50.5mm in height and 52.0mm in diameter. What is the density of the meterial?(kg/m^3)
Answer:
The correct answer is - 93.24×10^4 kg/m^3.
Explanation:
Given:
height of cylinder: 50.5 mm
diameter = 52.0
then radius will be diameter/2 = 52/2 = 26
Formula:
Density = mass/ volume
Volume = πr^2h
solution:
Now the volume of a cylinder is v = (22/7)×r^2×h
= 22/7×26×26×50.5
= 107261.59 mm^3
Now volume in cubic meter V =10.7261 ×10^(-5) m^3
So density d = m/V = 1/(10.7261 ×10^(-5))
Or d = 93.24×10^4 kg/m^3
How much power is required to do 10 J of work on an object in 2 seconds?
Answer:
5 watts
power = work done ÷ time taken
10 j ÷ 2 = 5w
What happens when a neutral atom gains an electrons?
Answer:
The neutral atom becomes an anion.
Explanation:
When a neutral atom gains an electron (e−), the number of protons (p+) in the nucleus remains the same, resulting in the atom becoming an anion (an ion with a net negative charge).
A golf ball strikes a hard, smooth floor at an angle of 27.0 ° and, as the drawing shows, rebounds at the same angle. The mass of the ball is 0.0200 kg, and its speed is 33.0 m/s just before and after striking the floor. What is the magnitude of the impulse applied to the golf ball by the floor? (Hint: Note that only the vertical component of the ball's momentum changes during impact with the floor, and ignore the weight of the ball.)
Answer:
J = 3.564 N.s
Explanation:
From the given information:
angle θ = 27°
mass = 0.0200 kg
speed = 33.0 m/s
To determine the impulse applied using the equation:
J = m(2V cos θ)
J = 0.0200 (2 × cos (27.0))
J = 0.0200 (2 × 0.8910)
J = 0.03564
J = 3.564 N.s
Pushing open door .action force and reaction
Answer: Newtons third law
Explanation: According to Newton's third law of motion, forces always act in equal but opposite pairs. Another way of saying this is for every action, there is an equal but opposite reaction. This means that when you push on a wall, the wall pushes back on you with a force equal in strength to the force you exerted.
Newton's third law we find that the reaction to the force is an out applied by the putting door towards to the person.
given parameters
Push the door open
to find
The reaction
Newton's third law states that the forces between bodies always occur in pairs, that is, the two bodies interacting with each other, therefore these forces are of equal magnitude, but opposite direction. Consequently each force acts on one of the bodies, these forces are called action and reaction.
By applying Newton's third law to the open door; we exert a force on the door therefore the door exerts a force of equal magnitude, but opposite direction on us.
Using Newton's third law we find that the reaction to the force is an out applied to the person.
Learn more about Newton's third law here: brainly.com/question/23772134
A textbook of mass 2.10 kg rests on a frictionless, horizontal surface. A cord attached to the book passes over a pulley whose diameter is 0.100 m , to a hanging book with mass 3.10 kg . The system is released from rest, and the books are observed to move a distance 1.29 m over a time interval of 0.850 s . Part A What is the tension in the part of the cord attached to the textbook
Answer:
the tension in the part of the cord attached to the textbook is 7.4989 N
Explanation:
Given the data in the question;
As illustrated in the image below;
first we determine the value of the acceleration,
along vertical direction; we use the second equation of motion;
y = ut + [tex]\frac{1}{2}[/tex]a[tex]_y[/tex]t²
we substitute;
0 m/s for u, 1.29 m for y, 0.850 s for t,
1.29 = 0×0.850 + [tex]\frac{1}{2}[/tex]×a[tex]_y[/tex]×(0.850)²
1.29 = 0.36125a[tex]_y[/tex]
a[tex]_y[/tex] = 1.29 / 0.36125
a[tex]_y[/tex] = 3.5709 m/s²
Now when the text book is moving with acceleration , the dynamic equation will be;
T₁ = m₁a[tex]_y[/tex]
where m₁ is the mass of the text book ( 2.10 kg )
a[tex]_y[/tex] is the vertical acceleration ( 3.5709 m/s² )
so we substitute
T₁ = 2.10 × 3.5709
T₁ = 7.4989 N
Therefore, the tension in the part of the cord attached to the textbook is 7.4989 N
if one stand of DNA reads as AATTCCGGATCG, what would the opposite strand bases be?
Drink water at least every
weather.
minutes while exercising in hot
Answer:
Drink water at least every 5 to 20 minutes while exercising in hot weather.
Explanation:
Hope this helps brainliest please
Determine a formula for the maximum height h that a rocket will reach if launched vertically from the Earth's surface with speed v0(v < vesc). Express in terms of v0, rE, ME, and G.
Initially, the energies are:
[tex]U_{i}=-\frac{G M_{\varepsilon} m}{r_{e}} \\ =K_{i}=\frac{1}{2} m v_{0}^{2}[/tex]
At final point, the energies are:
[tex]U_{f}=-\frac{G M_{\varepsilon} m}{r_{e}+h} \\ K_{f}=\frac{1}{2} m(0)^{2}=0[/tex]
Using conservation law of energy,
[tex]-\frac{G M_{e} m}{r_{e}}+\frac{1}{2} m v_{0}^{2} &=-\frac{G M_{e} m}{r_{\varepsilon}+h} \\ -\frac{G M_{e}}{r_{e}}+\frac{v_{0}^{2}}{2} &=-\frac{G M_{e}}{r_{e}+h} \\ \frac{-2 G M_{e}+r_{e} v_{0}^{2}}{2 r_{e}} &=-\frac{G M_{e}}{r_{e}+h} \\ \frac{r_{e}+h}{G M_{e}} &=\frac{2 r_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}[/tex]
The equation is further simplified as:
[tex]r_{e}+h &=\left(\frac{2 r_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}\right) G M_{e} \\ h &=\frac{2 r_{e} G M_{e}}{2 G M_{e}-r_{e} v_{0}^{2}}-r_{e} \\ &=\frac{2 r_{e} G M_{e}-2 r_{e} G M_{e}+r_{e}^{2} v_{0}^{2}}{2 G M_{e}-r_{e} v_{0}^{2}} \\ & h=\frac{r_{e}^{2} v_{0}^{2}}{2 G M_{e}-r_{e} v_{0}^{2}}[/tex]