HELP DUE TODAY BEST ANSWER GET BRAINLIE
One of the greatest dangers in a tornado is from flying objects. A 15 pound piece of lumber can turn into a flying missile that could severely damage walls and homes. A piece of steel with a mass of 200 pounds and travelling at the same velocity would cause even more damage. Select any evidence from the list below that you could use to explain why a 200 pound piece of steel would cause more damage than a 15 pound piece of wood travelling at the same velocity.

As the kinetic energy of an object increases, the force it can exert on another object decreases.

As the kinetic energy of an object increases, the force it can exert on another object increases.

Objects with more mass have less kinetic energy.

Objects with more mass have more kinetic energy.

As the velocity of an object increases, its kinetic energy decreases.

As the velocity of an object increases, its kinetic energy increases.

Answer:

D

Explanation:

Answer:

35 N

Explanation:

F = ma

centripetal force = 10(3.5) = 35 N

Answer:

momentum=mass x velocity= 10 x 2 = 20kgm/s

Answer:

When R1 = 2.193, R2 = 3.894

When R1 = 3.894, R2 = 2.193

Explanation:

We are told that when R1 and R2 are connected in series, the voltage is 12.6 V and the current is 2.07 A.

Formula for resistance is;

R = V/I

R = 12.6/2.07

R = 6.087 ohms

Since R1 and R2 are connected in series.

Thus; R1 + R2 = 6.087 ohms

R1 = 6.087 - R2

We are also told that when they are connected in parallel, the current is 8.98 A.

Thus, R = 12/8.98

R = 1.403 ohms

Thus;

(1/R1) + (1/R2) = 1/1.403

Let's put 6.087 - R2 for R1;

(1/(6.087 - R2)) + (1/R2) = 1/1.403

Multiply through by 1.403R2(6.087 - R2) to get;

1.403R2 + 1.403(6.087 - R2) = R2(6.087 - R2)

Expanding gives;

1.403R2 + 8.54 - 1.403R2 = 6.087R2 - (R2)²

(R2)² - 6.087R2 + 8.54 = 0

Using quadratic formula, we have;

R2 = 2.193 ohms or 3.894 ohms

Thus,

R1 = 6.087 - 2.193 or R1 = 6.087 - 3.894

R1 = 3.894 or 2.193

When R1 = 2.193, R2 = 3.894

When R1 = 3.894, R2 = 2.193

Answer:

The correct answer is A) It is upright and 1.5m behind the mirror

Explanation:

Your reflection must be upright, meaning vertical/erect, and the distance will be the exact same. Also, the reflected ray appears as if it had traveled from an object located behind the mirror.

Answer:

average speed of the fist during the hook = 15 m/s or 1500 cm/s

Explanation:

We are given;

Speed of shoulder contraction, v_s = 75 cm/s = 0.75 m/s

Distance moved through the arc length by shoulder, d_s = 5 cm = 0.05 m

Distance moved by the fist, d_f = 100 cm = 1 m

Now, we are to find the average speed of the fist during the hook; v_f

Thus can be gotten from proportion;.

d_f/d_s = v_f/ v_s

Making V_f the subject, we have;

v_f = (d_f × v_s)/d_s

Thus;

v_f = (1 × 0.75)/0.05

v_f = 0.75/0.05

v_f = 15 m/s

Answer:

[tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex]

[tex]44.43^{\circ}[/tex], second order does not exist

Explanation:

n = Number of lines grating = [tex]1\times10^4\ \text{Lines/cm}[/tex]

[tex]\lambda[/tex] = Wavelength

m = Order

Distance between slits is given by

[tex]d=\dfrac{1}{n}\\\Rightarrow d=\dfrac{1}{1\times 10^4}\\\Rightarrow d=10^{-6}\ \text{m}[/tex]

[tex]\lambda=400\ \text{nm}[/tex]

m = 1

We have the relation

[tex]d\sin\theta=m\lambda\\\Rightarrow \theta=\sin^{-1}\dfrac{m\lambda}{d}\\\Rightarrow \theta=\sin^{-1}\dfrac{1\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=23.58^{\circ}[/tex]

m = 2

[tex]\theta=\sin^{-1}\dfrac{2\times 400\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=53.13^{\circ}[/tex]

The first and second order angles for light of wavelength 400 nm are [tex]23.58^{\circ}[/tex] and [tex]53.13^{\circ}[/tex].

[tex]\lambda=700\ \text{nm}[/tex]

m = 1

[tex]\theta=\sin^{-1}\dfrac{1\times 700\times 10^{-9}}{10^{-6}}\\\Rightarrow \theta=44.43^{\circ}[/tex]

m = 2

[tex]\theta=\sin^{-1}\dfrac{2\times 700\times 10^{-9}}{10^{-6}}[/tex]

Here [tex]\dfrac{2\times 700\times 10^{-9}}{10^{-6}}=1.4>1[/tex] so there is no second order angle for this case.

The first order angle for light of wavelength 700 nm are [tex]44.43^{\circ}[/tex].

Second order angle does not exist.

Answer:

533.33 nm

Explanation:

Since dsinθ = mλ  for each slit, where m = order of slit and λ = wavelength of light. Let m' = 10 th order fringe of the first slit of wavelength of light, λ = 640 nm and m"= 12 th order fringe of the second slight of wavelength of light, λ'.

Since the fringes coincide,

m'λ = m"λ'

λ' = m'λ/m"

= 10 × 640 nm/12

= 6400 nm/12

= 533.33 nm

Answer:

According to "http://ww2010.atmos.uiuc.edu"  Diffraction is the slight bending of light as it passes around the edge of an object.

Some examples of Light Defraction would be..

-CD reflecting rainbow colours

-Sun appears red during sunset

-From the shadow of an object

Answer:

C. Sigmund Freud . . . Carl Jung

Explanation:

edge 2021

C.Sigmund Freud and Carl Jung both heavily relied on dream analysis in their treatment of patients.

Freud is well-known for inventing and developing the approach of psychoanalysis; for articulating the psychoanalytic idea of motivation, intellectual infection, and the structure of the unconscious; and for influencing medical and popular conceptions of human nature by using positing both everyday and strange thought.

Sigmund Freud was an Austrian neurologist who's perhaps maximum known as the founding father of psychoanalysis. Freud advanced a fixed of therapeutic strategies centered on communication therapy that worried the use of techniques that include transference, loose affiliation, and dream interpretation.

Learn more about Sigmund Freud here: https://brainly.com/question/2706543

#SPJ2

Answer:

The specific heat capacity of steel is lower than the specific heat capacity of wood

Explanation:

THERE IS ONLY 1 ON MY assignment i geot dis right  please brainlyist

The specific heat capacity of steel is lower than the specific heat of a piece of wood. Therefore, option (2) is correct.

Specific heat can be defined as the heat energy required to change the temperature of one unit mass of a substance of a constant volume by 1 °C. The S.I. unit of the specific heat capacity of a material is KJ/Kg.

The thermal capacity of a material is defined as a physical property of a substance. The amount of heat is given to a given mass to create a change in unit temperature.

The mathematical expression of specific heat capacity can be written as :

Q = m C ΔT      Where C is the heat capacity.

The specific heat capacity is an intensive property of a substance as it does not depend upon the size of the material.

A steel metal fence post feels colder than a wooden fence post of similar size because the specific heat of steel is lower than the specific heat capacity of wood.

Learn more about specific heat, here:

brainly.com/question/11297584

#SPJ5

Answer:

the motorcycle travels 522 miles in 18 seconds Explanation: 29 x 18 is 522 I'm pretty sure that's what it was asking but I don't know

The framers wanted senators to be more mature and more experienced than representatives. (C)

Answer:

C -> The framers wanted senators to be more mature and more experienced than representatives.

Answer:

the oscillations of the electrons must be in the 10⁸ Hz = 100 MHz range

Explanation:

The speed of a wave of radio, television, light, heat, all are manifestations of electromagnetic waves that are oscillations of electric and magnetic fields that support each other, the speed of all these waves is the same and the vacuum is equal to c = 3 108 m / s

All waves have a relationship between the speed of the wave, its frequency and wavelength

          c = λ f

          f = c /λ

for this case lam = 1 m

          f = 3 10⁸/1

          f = 3 10⁸ Hz

the oscillations of the electrons must be in the MHz range

It should be clarified that the speed of light in air is a little lower

          n = c / v

          v = c / n

the refractive index of vacuum is n = 1 and the refractive index of air is n = 1.000002

Answer:

1)   x = x₀ + vot - ½ c t² - 1/6 bt³,    v = v₀ - ct - ½ b t²

2)   v₁ = 5.25 m/s,         v₂ = -8 m/s

Explanation:

1) For this exercise, the relationship of the body is not constant, so you must use the definition of speed and position to find them.

acceleration is

           a = c + bt

a) the relationship between velocity and acceleration

           a = [tex]\frac{dv}{dt}[/tex]

           dv = -a dt

The negative sign is because the acceleration is contrary to the speed to stop the vehicle.

we integrate

           ∫ dv = - ∫ a dt

           ∫ dv = -∫ (c + bt) dt

            v = -c t - ½ b t²

This must be valued from the lower limit, the velocity is vo, up to the upper limit, the velocity is v for time t

             v - v₀ = -c (t-0) - ½ b (t²-0)

             v = v₀ - ct - ½ b t²

b) the velocity of the body is

             v = [tex]\frac{dx}{dt}[/tex]

             dx = v dt

we replace and integrate

              ∫ dx = ∫ (v₀ - c t - ½ bt²) dt

              x-x₀ = v₀ t - ½ c t² - ½ b ⅓ t³

Evaluations from the lower limit the body is at x₀ for t = 0 and the upper limit the body is x = x for t = t

           x - x₀ = v₀ (t-0) - ½ c (t²-0) + [tex]\frac{1}{6}[/tex]  (t³ -0)

           x = x₀ + vot - ½ c t² - 1/6 bt³

2) The speed when you reach the traffic light

Let's write the data that indicates, the initial velocity is vo = 15 m / s, the initial position is xo = 315m, let's use the initial values ​​to find the constants.

       t = 25 s x = 20

we substitute

          20 = 315 + 15 25 - ½ c 25² - 1/6 b 25³

         0 = 295 + 375 - 312.5 c - 2604.16 b

         670 = 312.5 c + 2604.16 b

we simplify

         2.144 = c + 8.33 b

Now let's use the equation for velocity,

        v = v₀ - ct - ½ b t²

        v = 15 - c 25 - ½ b 25²

        v = 15 - 25 c - 312.5 b

let's write our two equations

        2.144 = c + 8.33 b

        v = 15 - 25 c - 312.5 b

Let's examine our equations, we have two equations and three unknowns (b, c, v) for which the system cannot be solved without another equation, in the statement it is not clear, but the most common condition is that if the semaphore does not change, it follows with this acceleration (constant) to a stop

               a = c + b 25

from the first equation

              c = 8.33 / 2.144 b

              C = 3.885 b

we substitute in the other two

            v = 15 - 25 (3.885 b) - 312.5 b

            v = 15 - 409.6 b

final acelearation

            a = 28.885 b

let's use the cinematic equation

               [tex]v_{f}^2[/tex]= v² - 2 a x

                0 = v² - 2a 20

               0 = v² - (28.885b) 40

               v² = 1155.4 b

we write the system of equations

               v = 15 - 409.6 b

               v² = 1155.4 b

resolve

              v²= 1155.4 ( [tex]\frac{15 -v }{409.6}[/tex] )

              v² = 2.8 ( 15 -v)

              v² + 2.8 v - 42.3 = 0

              v=  [ -2.8 ±[tex]\sqrt {2.8^2 + 4 \ 42.3) }[/tex] ]/2 = [-2.8 ± 13.3]/2

              v₁ = 5.25 m/s

              v₂ = -8 m/s

Answer:

B. in the direction of the force

Explanation:

Sana nakatulong

Answer:

The angular speed is 23.24 rad/s.

Explanation:

Given;

mass of the disk, m = 7 kg

radius of the disk, r = 0.2 m

applied force, F = 42 N

distance moved by disk, d = 0.9 m

The torque experienced by the disk is calculated as follows;

τ = F x d = I x α

where;

I is the moment of inertia of the disk = ¹/₂mr²

α is the angular acceleration

F x r = ¹/₂mr² x α

The angular acceleration is calculated as;

[tex]\alpha = \frac{2Fr}{mr^2} \\\\\ \alpha = \frac{2F}{mr}\\\\\alpha = \frac{2 \times 42 }{7 \times 0.2} \\\\\alpha = 60 \ rad/s^2[/tex]

The angular speed is determined by applying the following kinematic equation;

[tex]\omega _f^2 = \omega_i ^2 + 2\alpha \theta[/tex]

initial angular speed, ωi = 0

angular distance, θ = d/r = 0.9/0.2 = 4.5 rad

[tex]\omega _f^2 = 2\alpha \theta\\\\\omega _f = \sqrt{2\alpha \theta} \\\\\omega _f = \sqrt{2 \times 60 \times 4.5} \\\\\omega _f = 23.24 \ rad/s[/tex]

Therefore, the angular speed is 23.24 rad/s.

Answer:

0.518 m/s

Explanation:

To solve this question, we would use the Law of conservation of momentum.

It is stated that the skateboard and the person were at rest initially, this means that their initial momentum is 0. Since they aren't moving.

And from the law if conservation of momentum, we know that initial momentum must be equal to final momentum.

The final momentum of the bricks will be 2* 0.9 * 19 = 34.2 kg m/s.

This means that the momentum of the person and that of the skateboard has to be 34.2 kg m/s also, although, it will be in the opposite direction.

Mass of the person plus that of the skateboard is

64 + 2 = 66 kg,

If we divide the momentum of the person and that of the skateboard by the mass of the both of them, we get the speed at which they are moving after the bricks are thrown

Recoil speed = (34.2 kg m/s)/(66 kg) = 0.518 m/s.

The recoil speed of the person is 0.518 m/s

As per the conservation of momentum, the initial momentum should be equivalent to the final momentum

So, here the final momentum should be

=  2* 0.9 * 19

= 34.2 kg m/s.

Now the mass of the person should be

= 64 + 2

= 66 kg,

Now the recoil speed should be

Recoil speed = (34.2 kg m/s)/(66 kg)

= 0.518 m/s.

Learn more about speed here: https://brainly.com/question/23855783

Answer:

decomposition

Explanation:

Answer:

The respiratory system provides oxygen for cells, while the circulatory system transports oxygen to cells.

Explanation:

so the answer is D

Answer:

the answer is c, 3m......

When a train is moving at the speed of 30 m/s. The wavelength of the wave is 3 m.

Wavelength is the characteristic of the wave which represents the distance between the adjacent crest or trough of the wave.

Given is the speed of the train of waves 30 m/s and frequency of the wave is 10 Hz, then the wavelength is related to speed and wavelength as

v = fλ

30 = 10 × λ

λ = 3 m

Thus, the wavelength of the wave is 3 m.

Learn more about wavelength.

https://brainly.com/question/13533093

#SPJ2

Answer:

Following are the solution to the given question:

Explanation:

The input linear polarisation was shown at an angle of [tex]2 \mu[/tex]. It's a very popular use of a half-wave plate. In particular, consider the case [tex]\mu = 45 \pm[/tex], at which the angle of rotation is [tex]90\pm[/tex]. HWP thereby provides a great way to turn, for instance, a linear polarised light that swings horizontally to polarise vertically. Illustration of action on event circularly polarized light of the half-wave platform. Customarily it is the slow axis of HWP that corresponds to either the rotation. Note that perhaps the vector of polarization is "double-headed," i.e., the electromagnetic current swinging back and forward in time. Therefore the turning angle could be referred to as the rapid axis to reach the same result. Please find the attached file.

Answer:

20 J/s

Explanation:

Given data

Kinetic energy=100 J

Time= 5 seconds

Hence the rate at which the kinetic friction work is

=100/5

=20 J/s

Therefore the answer is 20 J/s

Answer:

e. the number of active motor units increases.

Explanation:

There is a direct relationship between the number of active motor units and the grip strength in a given scenario. For example, increase in the grip strength leads to increase in the number of active motor units. In the other-hand, the decrease in grip strength leads to the decrease in the number of active motor units.

Answer:As people get older, most become better able to regulate negative feelings and emphasize the positive.

Explanation: With age, your skin thins and becomes less elastic and more fragile, and fatty tissue just below the skin decreases. You might notice that you bruise more easily. Decreased production of natural oils might make your skin drier. Wrinkles, age spots and small growths called skin tags are more common.

Answer:

its B

Explanation:

Answer:

correct tysmm

Explanation: