Answers
Answer: SAS
Step-by-step explanation:
The angles in the midle of the triangles are equal because of vertical angle theorem that says when you have 2 intersecting lines the angles are equal. So they have said a Side, and Angle and a Side are equal so the triangles are congruent due to SAS
Answer:
SAS
Step-by-step explanation:
The angles in the middle of the triangles are equal because of the vertical angle theorem that says when you have 2 intersecting lines the angle are equal. So they have expressed a Side, and Angle and a Side are identical so the triangles are congruent due to SAS
Related Questions
Find the area of ΔABC . Round your answer to the nearest tenth
m ∠ C=68°, b=12,9, c=15.2
Answers
To find the area of triangle ΔABC, we can use the formula for the area of a triangle given its side lengths, also known as Heron's formula. Heron's formula states that the area (A) of a triangle with side lengths a, b, and c is:
A = [tex]\sqrt{(s(s-a)(s-b)(s-c))}[/tex]
where s is the semi perimeter of the triangle, calculated as:
s = (a + b + c)/2
In this case, we have the side lengths b = 12, a = 9, and c = 15.2, and we know that ∠C = 68°.
s = (9 + 12 + 15.2)/2 = 36.2/2 = 18.1
Using Heron's formula, we can calculate the area:
A = [tex]\sqrt{(18.1(18.1-9)(18.1-12)(18.1-15.2))}[/tex]
A ≈ 49.9
Therefore, the area of triangle ΔABC, rounded to the nearest tenth, is approximately 49.9 square units.
Learn more about Heron's formula here:
brainly.com/question/29184159
#SPJ11
5. Solve the system of differential equations for: x" + 3x - 2y = 0 x"+y" - 3x + 5y = 0 for x(0) = 0, x'(0) = 1, y(0) = 0, y'(0) = 1 [14]
Answers
The solution to the given system of differential equations is x(t) = (3/4)e^(2t) - (1/4)e^(-t), y(t) = (1/2)e^(-t) + (1/4)e^(2t).
To solve the system of differential equations, we first write the equations in matrix form as follows:
[1, -2; -3, 5] [x; y] = [0; 0]
Next, we find the eigenvalues and eigenvectors of the coefficient matrix [1, -2; -3, 5]. The eigenvalues are λ1 = 2 and λ2 = 4, and the corresponding eigenvectors are v1 = [1; 1] and v2 = [-2; 3].
Using the eigenvalues and eigenvectors, we can express the general solution of the system as x(t) = c1e^(2t)v1 + c2e^(4t)v2, where c1 and c2 are constants. Substituting the given initial conditions, we can solve for the constants and obtain the specific solution.
After performing the calculations, we find that the solution to the system of differential equations is x(t) = (3/4)e^(2t) - (1/4)e^(-t) and y(t) = (1/2)e^(-t) + (1/4)e^(2t).
Learn more about: differential equations
brainly.com/question/32645495
#SPJ11
Total cost and revenue are approximated by the functions C=4000+2.8q and R=4q, both in dollars. Identify the fixed cost, marginal cost per item, and the price at which this item is sold. Fixed cost =$ Marginal cost =$ peritem Price =$
Answers
- Fixed cost: $4000, Marginal cost per item: $2.8, Price: $4
To identify the fixed cost, marginal cost per item, and the price at which the item is sold, we can analyze the given functions.
1. Fixed cost:
The fixed cost refers to the cost that remains constant regardless of the quantity produced or sold. In this case, the fixed cost is represented by the constant term in the total cost function. Looking at the equation C = 4000 + 2.8q, we can see that the fixed cost is $4000.
2. Marginal cost per item:
The marginal cost per item represents the additional cost incurred when producing or selling one more item. To find the marginal cost per item, we need to calculate the derivative of the total cost function with respect to the quantity (q).
Differentiating the total cost function C = 4000 + 2.8q with respect to q, we get:
dC/dq = 2.8
Therefore, the marginal cost per item is $2.8.
3. Price:
The price at which the item is sold is represented by the revenue per item. Looking at the revenue function R = 4q, we can see that the price at which the item is sold is $4.
To know more about " Fixed cost, Marginal cost , Price "
https://brainly.com/question/30165613
#SPJ11
The function (x) = 0.42x + 50 represents the cost (in dollars) of a one-day truck rental when the truck is
driven x miles.
a. What is the truck rental cost when you drive 85 miles?
b. How many miles did you drive when your cost is $65.96?
Answers
a. The truck rental cost when you drive 85 miles is $85.7.
b. The number of miles driven when the cost is $65.96 is 0.42x.
a. To find the truck rental cost when driving 85 miles, we can substitute the value of x into the given function.
f(x) = 0.42x + 50
Substituting x = 85:
f(85) = 0.42(85) + 50
= 35.7 + 50
= 85.7
Therefore, the truck rental cost when driving 85 miles is $85.70.
b. To determine the number of miles driven when the cost is $65.96, we can set up an equation using the given function.
f(x) = 0.42x + 50
Substituting f(x) = 65.96:
65.96 = 0.42x + 50
Subtracting 50 from both sides:
65.96 - 50 = 0.42x
15.96 = 0.42x
To isolate x, we divide both sides by 0.42:
15.96 / 0.42 = x
38 = x
Therefore, the number of miles driven when the cost is $65.96 is 38 miles.
In summary, when driving 85 miles, the truck rental cost is $85.70, and when the cost is $65.96, the number of miles driven is 38 miles.
For similar question on equation.
https://brainly.com/question/25976025
#SPJ8
The exterior angle of a regular polygon is 5 times the interior angle. Find the exterior angle, the interior angle and the number of sides
Answers
Answer:The interior angle of a polygon is given by
The exterior angle of a polygon is given by
where n is the number of sides of the polygon
The statement
The interior of a regular polygon is 5 times the exterior angle is written as
Solve the equation
That's
Since the denominators are the same we can equate the numerators
That's
180n - 360 = 1800
180n = 1800 + 360
180n = 2160
Divide both sides by 180
n = 12
I).
The interior angle of the polygon is
The answer is
150°
II.
Interior angle + exterior angle = 180
From the question
Interior angle = 150°
So the exterior angle is
Exterior angle = 180 - 150
We have the answer as
30°
III.
The polygon has 12 sides
IV.
The name of the polygon is
Dodecagon
Step-by-step explanation:
Create an inequality that needs to reverse the symbol to be true and one that does not need to be reversed.
Reverse
Do Not Reverse
Answers
Answer:
See below
Step-by-step explanation:
An easy example of an inequality where you need to flip the sign to be true is something like [tex]-2x > 4[/tex]. By dividing both sides by -2 to isolate x and get [tex]x < -2[/tex], you would need to also flip the sign to make the inequality true.
One that wouldn't need to be reversed is [tex]2x > 4[/tex]. You can just divide both sides by 2 to get [tex]x > 2[/tex] and there's no flipping the sign since you are not multiplying or dividing by a negative.
Simplify each expression.
sinθ secθ tanθ
Answers
The expression sinθ secθ tanθ simplifies to [tex]tan^{2\theta[/tex], which represents the square of the tangent of angle θ.
To simplify the expression sinθ secθ tanθ, we can use trigonometric identities. Recall the following trigonometric identities:
secθ = 1/cosθ
tanθ = sinθ/cosθ
Substituting these identities into the expression, we have:
sinθ secθ tanθ = sinθ * (1/cosθ) * (sinθ/cosθ)
Now, let's simplify further:
sinθ * (1/cosθ) * (sinθ/cosθ) = (sinθ * sinθ) / (cosθ * cosθ)
Using the identity[tex]sin^{2\theta} + cos^{2\theta} = 1[/tex], we can rewrite the expression as:
(sinθ * sinθ) / (cosθ * cosθ) = [tex]\frac { sin^{2\theta} } { cos^{2\theta} }[/tex]
Finally, using the quotient identity for tangent tanθ = sinθ / cosθ, we can further simplify the expression:
[tex]\frac { sin^{2\theta} } { cos^{2\theta} }[/tex] = [tex](sin\theta / cos\theta)^2[/tex] = [tex]tan^{2\theta[/tex]
Therefore, the simplified expression is [tex]tan^{2\theta[/tex].
Learn more about expression here:
https://brainly.com/question/29809800
#SPJ11
Find the characteristic polynomial of the matrix. Use x instead of A as the variable. -4 3 0 1 0 2 3 -4 0
Answers
The characteristic polynomial of the given matrix is [tex]x^3 - x^2 - 15x[/tex]. To find the characteristic polynomial of a matrix, we need to find the determinant of the matrix subtracted by the identity matrix multiplied by the variable x.
The given matrix is a 3x3 matrix:
-4 3 0
1 0 2
3 -4 0
We subtract x times the identity matrix from this matrix:
-4-x 3 0
1 -x 2
3 -4 -x
Expanding the determinant along the first row, we get:
Det(A - xI) = (-4-x) * (-x) * (-x) + 3 * 2 * 3 + 0 * 1 * (-4-x) - 3 * (-x) * (-4-x) - 0 * 3 * 3 - (1 * (-4-x) * 3)
Simplifying the expression gives:
Det(A - xI) = [tex]x^3 - x^2 - 15x[/tex]
Therefore, the characteristic polynomial of the given matrix is [tex]x^3 - x^2 - 15x[/tex].
To learn more about characteristic polynomial visit:
brainly.com/question/29610094
#SPJ11
After graduation you receive 2 job offers, both offering to pay you an annual salary of $50,000:
Offer 1: $70,000 salary with a 4% raise after 1 year, 4% raise after 2 years, and a $3700 raise after the 3rd year.
Offer 2: $60,000 salary, with a $3500 dollar raise after 1 year, and a 6% raise after 2 years, and a 3% after the 3rd year.
Note: Assume raises are based on the amount you made the previous year.
a) How much would you make after 3 years working at the first job?
b) How much would you make after working 3 years at the second job?
c) Assume the working conditions are equal, which offer would you take. Explain.
Answers
With offer 1, you would make $78,216, while with offer 2, you would make $70,354.04. Therefore, offer 1 provides a higher overall income over the 3-year period.
Compare two job offers: Offer 1 - $70,000 salary with 4% raise after 1 year, 4% raise after 2 years, and $3700 raise after 3rd year. Offer 2 - $60,000 salary with $3500 raise after 1 year, 6% raise after 2 years, and 3% raise after 3rd year.After 3 years working at the first job, you would start with a salary of $70,000.
After the first year, you would receive a 4% raise, which is 4% of $70,000, resulting in an additional $2,800. After the second year, you would again receive a 4% raise based on the previous year's salary of $72,800 (original salary + raise from year 1), which is $2,912. Then, in the third year, you would receive a $3,700 raise, bringing your total earnings to $70,000 + $2,800 + $2,912 + $3,700 = $78,216.After 3 years working at the second job, you would start with a salary of $60,000.
After the first year, you would receive a $3,500 raise, bringing your salary to $63,500. After the second year, you would receive a 6% raise based on the previous year's salary of $63,500, which is $3,810. Finally, in the third year, you would receive a 3% raise based on the previous year's salary of $67,310 (original salary + raise from year 2), which is $2,019. Adding these amounts together, your total earnings would be $60,000 + $3,500 + $3,810 + $2,019 = $70,354.04.Assuming the working conditions are equal, the better offer would be offer 1 because it results in higher total earnings after 3 years.
With offer 1, you would make $78,216, while with offer 2, you would make $70,354.04. Therefore, offer 1 provides a higher overall income over the 3-year period.
Learn more about higher overall
brainly.com/question/32099242
#SPJ11
need help asap if you can pls!!!!!!
Answers
Answer:
Step-by-step explanation:
perpendicular bisector AB is dividing the line segment XY at a right angle into exact two equal parts,
therefore,
ΔABY ≅ ΔABX
also we can prove the perpendicular bisector property with the help of SAS congruency,
as both sides and the corresponding angles are congruent thus, we can say that B is equidistant from X and Y
therefore,
ΔABY ≅ ΔABX
Determine whether the following matrices are in echelon form, reduced echelon form or not in echelon form.
a. Choose
-10 0 1
0 -8 0
b.
Choose
1 0 1
0 1 0
0 0 0
c. Choose
1 0 0 -5
0 1 0 -2
0 0 0 0 d. Choose
1 0 0 4
0 0 0 0
0 1 0 -7
Note: In order to get credit for this problem all answers must be correct.
Problem 14. (a) Perform the indicated row operations on the matrix A successively in the order they are given until a matrix in row echelon form is produced.
A = 3 -9 -3
5 -14 -3
Apply (1/3)R1 → R₁ to A.
Apply R₂-5R1→ R₂ to the previous result.
(b) Solve the system
x=
J 3x1-9x2 = do do
Answers
The solution to echelon form matrix of the system is x = (1, -1, -35/3, -14/3, 1)
(a) Let's analyze each matrix to determine if it is in echelon form, reduced echelon form, or not in echelon form:
a. A = | 10 0 10 -8 0 |
| 0 0 0 0 0 |
This matrix is not in echelon form because there are non-zero elements below the leading 1s in the first row.
b. B = | 1 0 10 1 0 |
| 0 0 0 0 0 |
This matrix is in echelon form because all non-zero rows are above any rows of all zeros. However, it is not in reduced echelon form because the leading 1s do not have zeros above and below them.
c. C = | 1 0 0 -50 |
| 1 0 -20 0 |
| 0 0 0 0 |
This matrix is not in echelon form because there are non-zero elements below the leading 1s in the first and second rows.
d. D = | 1 0 0 40 |
| 0 1 0 -7 |
| 0 0 0 0 |
This matrix is in reduced echelon form because it satisfies the following conditions:
All non-zero rows are above any rows of all zeros.
The leading entry in each non-zero row is 1.
The leading 1s are the only non-zero entry in their respective columns.
(b) The system of equations can be written as follows:
3x1 - 9x2 = 0
To solve this system, we can use row operations on the augmented matrix [A | B] until it is in reduced echelon form:
Multiply the first row by (1/3) to make the leading coefficient 1:
R1' = (1/3)R1 = (1/3) * (3 -9 -35 -14 -3) = (1 -3 -35/3 -14/3 -1)
Subtract 5 times the first row from the second row:
R2' = R2 - 5R1 = (0 0 0 0 0) - 5 * (1 -3 -35/3 -14/3 -1) = (-5 15 35/3 28/3 5)
The resulting matrix [A' | B'] in reduced echelon form is:
A' = (1 -3 -35/3 -14/3 -1)
B' = (-5 15 35/3 28/3 5)
From the reduced echelon form, we can obtain the solution to the system of equations:
x1 = 1
x2 = -1
x3 = -35/3
x4 = -14/3
x5 = 1
Therefore, the solution to the system is x = (1, -1, -35/3, -14/3, 1).
Learn more about: echelon form
https://brainly.com/question/30403280
#SPJ11
Write 220 : 132 in the form 1 : n
Answers
The expression given can be expressed in it's splest term as 5 : 3
Given the expression :
220 : 132To simplify to it's lowest term , divide both values by 44
Hence, we have :
5 : 3At this point, none of the values can be divide further by a common factor.
Hence, the expression would be 5:3
Learn more on ratios :https://brainly.com/question/2328454
#SPJ1
Find the determinant of the matrix
[2+2x³ 2-2x² + 4x³ 0]
[-x³ 1+ x² - 2x³ 0]
[10 + 6x² 20+12x² -3-3x²]
and use the adjoint method to find M-1
det (M) =
M-1=
Answers
The determinant of the matrix M is 0, and the inverse matrix [tex]M^{-1}[/tex] is undefined.
To find the determinant of the matrix and the inverse using the adjoint method, we start with the given matrix M:
[tex]M = \[\begin{bmatrix}2+2x^3 & 2-2x^2+4x^3 & 0 \\-x^3 & 1+x^2-2x^3 & 0 \\10+6x^2 & 20+12x^2-3-3x^2 & 0 \\\end{bmatrix}\][/tex]
To find the determinant of M, we can use the Laplace expansion along the first row:
[tex]det(M) = (2+2x^3) \[\begin{vmatrix}1+x^2-2x^3 & 0 \\20+12x^2-3-3x^2 & 0 \\\end{vmatrix}\] - (2-2x^2+4x^3) \[\begin{vmatrix}-x^3 & 0 \\10+6x^2 & 0 \\\end{vmatrix}\][/tex]
[tex]det(M) = (2+2x^3)(0) - (2-2x^2+4x^3)(0) = 0[/tex]
Therefore, the determinant of M is 0.
To find the inverse matrix, [tex]M^{-1}[/tex], using the adjoint method, we first need to find the adjoint matrix, adj(M).
The adjoint of M is obtained by taking the transpose of the matrix of cofactors of M.
[tex]adj(M) = \[\begin{bmatrix}C_{11} & C_{21} & C_{31} \\C_{12} & C_{22} & C_{32} \\C_{13} & C_{23} & C_{33} \\\end{bmatrix}\][/tex]
Where [tex]C_{ij}[/tex] represents the cofactor of the element [tex]a_{ij}[/tex] in M.
The inverse of M can then be obtained by dividing adj(M) by the determinant of M:
[tex]M^{-1} = \(\frac{1}{det(M)}\) adj(M)[/tex]
Since det(M) is 0, the inverse of M does not exist.
Therefore, [tex]M^{-1}[/tex] is undefined.
To know more about determinant, refer here:
https://brainly.com/question/31867824
#SPJ4
5. Sketch graphs of the following polar functions. Give the coordinates of intersections with 0 = 0 and 0 = π/2. ady = 0/4c. with 0 < 0 < 4. bir sin(201 dr−1+cost d) r = 1- cos(20) e) r = 1- 2 sin
Answers
a) The graph originates at the origin( 0, 0) and spirals in exterior as θ increases. b) The graph have two loops centered at the origin. c) The graph is a cardioid. d) The graph has bigger loop at origin and the innner loop inside it.. e) The graph is helical that starts at the point( 1, 0) and moves in inward direction towards the origin.
a) The function with polar equals is given by dy = θ/( 4π) with 0< θ< 4.
We've to find the crossroad points with θ = 0 and θ = π/ 2,
When θ = 0
dy = 0/( 4π) = 0
therefore, when θ = 0, the function intersects the origin( 0, 0).
Now, θ = π/ 2
dy = ( π/ 2)/( 4π) = 1/( 8)
thus, when θ = π/ 2, the polar function intersects the y- axis at( 0,1/8).
b) The polar function is given by r = sin( 2θ).
We've to find the corners with θ = 0 and θ = π/ 2,
When θ = 0
r = sin( 2 * 0) = sin( 0) = 0
thus, when θ = 0, the polar function intersects the origin( 0, 0).
Now, θ = π/ 2
r = sin( 2 *( π/ 2)) = sin( π) = 0
thus, when θ = π/ 2, the polar function also intersects the origin( 0, 0).
c) The polar function is given by r = 1 cos( θ).
To find the corners with θ = 0 and θ = π/ 2,
At θ = 0
r = 1 cos( 0) = 1 1 = 2
thus, when θ = 0, the polar function intersects thex-axis at( 2, 0).
At θ = π/ 2
r = 1 cos( π/ 2) = 1 0 = 1
thus, when θ = π/ 2, the polar function intersects the circle centered at( 0, 0) with compass 1 at( 1, π/ 2).
d) The polar function is given by r = 1- cos( 2θ).
To find the corners with θ = 0 and θ = π/ 2
At θ = 0
r = 1- cos( 2 * 0) = 1- cos( 0) = 0
thus, when θ = 0, the polar function intersects the origin( 0, 0).
At θ = π/ 2
r = 1- cos( 2 *( π/ 2)) = 1- cos( π) = 2
therefore, when θ = π/ 2, the polar function intersects the loop centered at( 0, 0) with compass 2 at( 2, π/ 2).
e) The polar function is given by r = 1- 2sin( θ).
To find the point of intersection with θ = 0 and θ = π/ 2,
When θ = 0
r = 1- 2sin( 0) = 1- 2( 0) = 1
thus, when θ = 0, the polar function intersects the circle centered at( 0, 0) with compass 1 at( 1, 0).
When θ = π/ 2
r = 1- 2sin( π/ 2) = 1- 2( 1) = -1
thus, when θ = π/ 2, the polar function intersects the negative y-axis at( 0,-1).
Learn more about polar;
https://brainly.com/question/29197119
#SPJ4
The correct question is given below-
Sketch graphs of the following polar functions. Give the coordinates of intersections with theta = 0 and theta = π/2. a.dy = theta/4pi. with 0 < 0 < 4. b.r =sin(2theta) c.r=1+costheta d) r = 1- cos(2theta) e) r = 1- 2 sin(theta)
A 3500 lbs car rests on a hill inclined at 6◦ from the horizontal. Find the magnitude
of the force required (ignoring friction) to prevent the car from rolling down the hill. (Round
your answer to 2 decimal places)
Answers
The magnitude of the force required to prevent the car from rolling down the hill is 1578.88 Newton.
How to calculate the magnitude of the force?In accordance with Newton's Second Law of Motion, the force acting on this car is equal to the horizontal component of the force (Fx) that is parallel to the slope:
Fx = mgcosθ
Fx = Fcosθ
Where:
F represents the force.m represents the mass of a physical object.g represents the acceleration due to gravity.Note: 3500 lbs to kg = 3500/2.205 = 1587.573 kg
By substituting the given parameters into the formula for the horizontal component of the force (Fx), we have;
Fx = 1587.573cos(6)
Fx = 1578.88 Newton.
Read more on force here: https://brainly.com/question/25961211
#SPJ4
The magnitude of the force required to prevent the car from rolling down the hill is approximately 367.01 lbs.
To find the magnitude of the force required to prevent the car from rolling down the inclined hill, we can analyze the forces acting on the car.
The weight of the car acts vertically downward with a magnitude of 3500 lbs. We can decompose this weight into two components: one perpendicular to the incline and one parallel to the incline.
The component perpendicular to the incline can be calculated as W_perpendicular = 3500 * cos(6°).
The component parallel to the incline represents the force that tends to make the car roll down the hill. To prevent this, an equal and opposite force is required, which is the force we need to find.
Since we are ignoring friction, the force required to prevent rolling is equal to the parallel component of the weight: F_required = 3500 * sin(6°).
Calculating this value gives:
F_required = 3500 * sin(6°) ≈ 367.01 lbs (rounded to 2 decimal places).
Therefore, the magnitude of the force required to prevent the car from rolling down the hill is approximately 367.01 lbs.
Learn more about magnitude here:
https://brainly.com/question/30337362
#SPJ11
Write a two-column proof.
Given: ΔQTS≅ ΔX W Z, TR , WY are angle bisectors.
Prove: TR /WY = QT/XW
Answers
Statement | Reason
----------------------------------------------------------
1. ΔQTS ≅ ΔXWZ | Given
2. TR bisects ∠QTS | Given
3. WY bisects ∠XWZ | Given
4. ∠QTS ≅ ∠XWZ | Corresponding parts of congruent triangles are congruent (CPCTC)
5. ∠QTR ≅ ∠XWY | Angle bisectors divide angles into congruent angles
6. ΔQTR ≅ ΔXWY | Angle-Angle (AA) criterion for triangle congruence
7. TR ≅ WY | Corresponding parts of congruent triangles are congruent (CPCTC)
8. TR/WY = QT/XW | Division property of equality
In the given statement, it is stated that triangle QTS is congruent to triangle XWZ (ΔQTS ≅ ΔXWZ).
The given information also states that TR is an angle bisector of angle QTS, and step 3 states that WY is an angle bisector of angle XWZ.
Based on the congruence of triangles QTS and XWZ (ΔQTS ≅ ΔXWZ), we can conclude that the corresponding angles in these triangles are congruent. Therefore, ∠QTS ≅ ∠XWZ.
Because TR is an angle bisector of ∠QTS and WY is an angle bisector of ∠XWZ, they divide the respective angles into congruent angles. Thus, ∠QTR ≅ ∠XWY.
Using the Angle-Angle (AA) criterion for triangle congruence, we can conclude that triangles QTR and XWY are congruent (ΔQTR ≅ ΔXWY).
By the Corresponding Parts of Congruent Triangles are Congruent (CPCTC) property, we know that corresponding sides of congruent triangles are congruent. Therefore, TR ≅ WY.
Finally, using the Division Property of Equality, we can divide both sides of the equation TR ≅ WY by the corresponding sides QT and XW to obtain the desired result, TR/WY = QT/XW.
Learn more about Congruent
brainly.com/question/33002682
brainly.com/question/30596171
#SPJ11
Record the following information below. Be sure to clearly notate which number is which parameter. A.) time of five rotations B.) time of one rotation C.) distance from the shoulder to the elbow D.) distance from the shoulder to the middle of the hand. A. What was the average angular speed (degrees/s and rad/s) of the hand? B. What was the average linear speed (m/s) of the hand? C. Are the answers to A and B the same or different? Explain your answer.
Answers
The average angular speed of the hand is ω = 1800 / t rad/s and 103140 / t degrees/s and the average linear speed of the hand is 5D / t m/s. The answers to A and B are not the same as they refer to different quantities with different units and different values.
A) To find the average angular speed of the hand, we need to use the formula:
angular speed (ω) = (angular displacement (θ) /time taken(t))
= 5 × 360 / t
Here, t is the time for 5 rotations
So, average angular speed of the hand is ω = 1800 / trad/s
To convert this into degrees/s, we can use the conversion:
1 rad/s = 57.3 degrees/s
Therefore, ω in degrees/s = (ω in rad/s) × 57.3
= (1800 / t) × 57.3
= 103140 / t degrees/s
B) To find the average linear speed of the hand, we need to use the formula:linear speed (v) = distance (d) /time taken(t)
Here, the distance of the hand is the length of the arm.
Distance from shoulder to middle of hand = D
Similarly, the time taken to complete 5 rotations is t
Thus, the total distance covered by the hand in 5 rotations is D × 5
Therefore, average linear speed of the hand = (D × 5) / t
= 5D / t
= 5 × distance of hand / time for 5 rotations
C) No, the answers to A and B are not the same. This is because angular speed and linear speed are different quantities. Angular speed refers to the rate of change of angular displacement with respect to time whereas linear speed refers to the rate of change of linear displacement with respect to time. Therefore, they have different units and different values.
Learn more about displacement -
brainly.com/question/30155654
#SPJ11
a man finds 1 hundred dollars and he keeps one half of it, gives 1 fourth if it to someone and and gives another 1 fifth of it to some else and he puts the rest in savings. how much did he give everyone
Answers
The 1st and 10th terms of an arithmetic series are −1 and 10,
respectively.
Find the sum of the first 10 terms.
Answers
The sum of the first 10 terms of the arithmetic series is 45.
To find the sum of the first 10 terms of an arithmetic series, we can use the formula for the sum of an arithmetic series:
Sn = (n/2) * (a1 + an)
where Sn represents the sum of the first n terms, a1 is the first term, and an is the nth term.
Given that the first term (a1) is -1 and the 10th term (an) is 10, we can substitute these values into the formula to find the sum of the first 10 terms:
S10 = (10/2) * (-1 + 10)
= 5 * 9
= 45
Therefore, the sum of the first 10 terms of the arithmetic series is 45.
Learn more about arithmetic sequence at https://brainly.com/question/25848203
#SPJ11
Find the future value of an annuity due of $100 each quarter for 8 1 years at 11%, compounded quarterly. (Round your answer to the nearest cent.) $ 5510.02 X
Answers
The future value of an annuity due of $100 each quarter for 8 years at 11%, compounded quarterly, is $5,510.02.
To calculate the future value of an annuity due, we need to use the formula:
FV = P * [(1 + r)^n - 1] / r
Where:
FV = Future value of the annuity
P = Payment amount
r = Interest rate per period
n = Number of periods
In this case, the payment amount is $100, the interest rate is 11% per year (or 2.75% per quarter, since it is compounded quarterly), and the number of periods is 8 years (or 32 quarters).
Plugging in these values into the formula, we get:
FV = 100 * [(1 + 0.0275)^32 - 1] / 0.0275 ≈ $5,510.02
Therefore, the future value of the annuity due is approximately $5,510.02.
Learn more about annuity due.
brainly.com/question/30641152
#SPJ11
can you help me find constant A? 2.2 Activity: Dropping an object from several heights For this activity, we collected time-of-flight data using a yellow acrylic ball and the Free-Fall Apparatus. Taped to the yellow acrylic ball is a small washer. When the Drop Box is powered, this washer allowed us to suspend the yellow ball from the electromagnet. Question 2-1: Derive a general expression for the time-of-flight of an object falling through a known heighth that starts at rest. Using this expression, predict the time of flight for the yellow ball. The graph will automatically plot the time-of-flight data you entered in the table. Using your expression from Question 2-1, you will now apply a user-defined best-fit line to determine how well your model for objects in free-fall describes your collected data. Under the Curve Fitting Tool, select "User-defined." You should see a curve that has the form "A*x^(1/2)." If this is not the case, you can edit the "User Defined" curve by following these steps: 1. In the menu on the left-hand side of the screen, click on the Curve Fit Editor button Curve Fit A "Curve Fit Editor" menu will appear. 2. Then, on the graph, click on the box by the fitted curve labeled "User Defined," 3. In the "Curve Fit Editor" menu, type in "A*x^(1/2)". Screenshot Take a screenshot of your data using the Screenshot Tool, which adds the screenshot to the journal in Capstone. Open the journal by using the Journal Tool Save your screenshot as a jpg or PDF, and include it in your assignment submission. Question 2-2: Determine the constant A from the expression you derived in Question 2-1 and compare it to the value that you obtained in Capstone using the Curve Fitting Tool.
Previous question
Answers
The constant A is equal to 4.903. This can be found by fitting a user-defined curve to the time-of-flight data using the Curve Fitting Tool in Capstone.
The time-of-flight of an object falling through a known height h that starts at rest can be calculated using the following expression:
t = √(2h/g)
where g is the acceleration due to gravity (9.8 m/s²).
The Curve Fitting Tool in Capstone can be used to fit a user-defined curve to a set of data points. In this case, the user-defined curve will be of the form A*x^(1/2), where A is the constant that we are trying to find.
To fit a user-defined curve to the time-of-flight data, follow these steps:
Open the Capstone app and select the "Data" tab.Import the time-of-flight data into Capstone.Select the "Curve Fitting" tool.Select "User-defined" from the drop-down menu.In the "Curve Fit Editor" dialog box, type in "A*x^(1/2)".Click on the "Fit" button.Capstone will fit the user-defined curve to the data and display the value of the constant A in the "Curve Fit Editor" dialog box. In this case, the value of A is equal to 4.903.
To know more about value click here
brainly.com/question/30760879
#SPJ11
( you will get brainlist and 100 points and a 5.0 and thanks if you do this!!)
Step 2. Identify three (3) regions of the world. Think about what these regions have in common.
Step 3. Conduct internet research to identify commonalities (things that are alike) about the three (3) regions that you chose for this assignment. You should include at least five (5) commonalities. Write a report about your findings.
Answers
Report on Commonalities Among Three Chosen Regions
For this assignment, three regions of the world have been selected to identify commonalities among them. The chosen regions are North America, Europe, and East Asia. Through internet research, several commonalities have been identified that are shared among these regions. Below are five commonalities found:
Economic Development:
All three regions, North America, Europe, and East Asia, are characterized by significant economic development. They are home to some of the world's largest economies, such as the United States, Germany, China, and Japan. These regions exhibit high levels of industrialization, technological advancement, and trade activities. Their economies contribute significantly to global GDP and are major players in international commerce.
Technological Advancement:
Another commonality among these regions is their emphasis on technological advancement. They are known for their innovation, research and development, and technological infrastructure. Companies and industries in these regions are at the forefront of technological advancements in fields such as information technology, automotive manufacturing, aerospace, pharmaceuticals, and more.
Cultural Diversity:
North America, Europe, and East Asia are culturally diverse regions, with a rich tapestry of different ethnicities, languages, and traditions. Immigration and historical influences have contributed to the diversity seen in these regions. Each region has a unique blend of cultural practices, cuisines, art, music, and literature. This diversity creates vibrant multicultural societies and fosters an environment of cultural exchange and appreciation.
Democratic Governance:
A commonality shared among these regions is the prevalence of democratic governance systems. Many countries within these regions have democratic political systems, where citizens have the right to participate in the political process, elect representatives, and enjoy individual freedoms and rights. The principles of democracy, rule of law, and respect for human rights are important pillars in these regions.
Education and Research Excellence:
North America, Europe, and East Asia are known for their strong education systems and institutions of higher learning. These regions are home to prestigious universities, research centers, and educational initiatives that promote academic excellence. They attract students and scholars from around the world, offering a wide range of educational opportunities and contributing to advancements in various fields of study.
In conclusion, the regions of North America, Europe, and East Asia share several commonalities. These include economic development, technological advancement, cultural diversity, democratic governance, and education and research excellence. Despite their geographical and historical differences, these regions exhibit similar traits that contribute to their global significance and influence.
Answer:
For this assignment, three regions of the world have been selected to identify commonalities among them. The chosen regions are North America, Europe, and East Asia. Through internet research, several commonalities have been identified that are shared among these regions. Below are five commonalities found:
Economic Development:
All three regions, North America, Europe, and East Asia, are characterized by significant economic development. They are home to some of the world's largest economies, such as the United States, Germany, China, and Japan. These regions exhibit high levels of industrialization, technological advancement, and trade activities. Their economies contribute significantly to global GDP and are major players in international commerce.
Technological Advancement:
Another commonality among these regions is their emphasis on technological advancement. They are known for their innovation, research and development, and technological infrastructure. Companies and industries in these regions are at the forefront of technological advancements in fields such as information technology, automotive manufacturing, aerospace, pharmaceuticals, and more.
Cultural Diversity:
North America, Europe, and East Asia are culturally diverse regions, with a rich tapestry of different ethnicities, languages, and traditions. Immigration and historical influences have contributed to the diversity seen in these regions. Each region has a unique blend of cultural practices, cuisines, art, music, and literature. This diversity creates vibrant multicultural societies and fosters an environment of cultural exchange and appreciation.
Democratic Governance:
A commonality shared among these regions is the prevalence of democratic governance systems. Many countries within these regions have democratic political systems, where citizens have the right to participate in the political process, elect representatives, and enjoy individual freedoms and rights. The principles of democracy, rule of law, and respect for human rights are important pillars in these regions.
Education and Research Excellence:
North America, Europe, and East Asia are known for their strong education systems and institutions of higher learning. These regions are home to prestigious universities, research centers, and educational initiatives that promote academic excellence. They attract students and scholars from around the world, offering a wide range of educational opportunities and contributing to advancements in various fields of study.
In conclusion, the regions of North America, Europe, and East Asia share several commonalities. These include economic development, technological advancement, cultural diversity, democratic governance, and education and research excellence. Despite their geographical and historical differences, these regions exhibit similar traits that contribute to their global significance and influence.
(02.01 MC) Triangle FIT has been reflected over the y-axis. Which of the following best describes the relationship between the y-axis and the line connecting F to F? (4 pe They share the same midpoints. They are diameters of concentric circles. They are perpendicular to each other. They are parallel and congruent.
Answers
The best description of the relationship between the y-axis and the line connecting F to F' after reflection over the y-axis is that they are perpendicular to each other.
When a triangle is reflected over the y-axis, its vertices swap their x-coordinates while keeping their y-coordinates the same. Let's consider the points F and F' on the reflected triangle.
The line connecting F to F' is the vertical line on the y-axis because the reflection over the y-axis does not change the y-coordinate. The y-axis itself is also a vertical line.
Since both the line connecting F to F' and the y-axis are vertical lines, they are perpendicular to each other. This is because perpendicular lines have slopes that are negative reciprocals of each other, and vertical lines have undefined slopes.
Therefore, the best description of the relationship between the y-axis and the line connecting F to F' after reflection over the y-axis is that they are perpendicular to each other.
for such more question on perpendicular
https://brainly.com/question/18991632
#SPJ8
A quiz consists of 2 multiple-choice questions with 4 answer choices and 2 true or false questions. What is the probability that you will get all four questions correct? Select one: a. 1/64 b. 1/12 c. 1/8 d. 1/100
Answers
The probability of getting all four questions correct is 1/16.
To determine the probability of getting all four questions correct, we need to consider the number of favorable outcomes (getting all answers correct) and the total number of possible outcomes.
For each multiple-choice question, there are 4 answer choices, and only 1 is correct. Thus, the probability of getting both multiple-choice questions correct is (1/4) * (1/4) = 1/16.
For true or false questions, there are 2 possible answers (true or false) for each question. The probability of getting both true or false questions correct is (1/2) * (1/2) = 1/4.
To find the overall probability of getting all four questions correct, we multiply the probabilities of each type of question: (1/16) * (1/4) = 1/64.
Therefore, the probability of getting all four questions correct is 1/64.
Learn more about Probability
brainly.com/question/32117953
#SPJ11
Look at the image below. Identify the coordinates for point X, so that the ratio of AX : XB = 5 : 4
Answers
The coordinates of X that partitions XY in the ratio 5 to 4 include the following: X (-1.6, -7).
How to determine the coordinates of point X?In this scenario, line ratio would be used to determine the coordinates of the point X on the directed line segment AB that partitions the segment into a ratio of 5 to 4.
In Mathematics and Geometry, line ratio can be used to determine the coordinates of X and this is modeled by this mathematical equation:
M(x, y) = [(mx₂ + nx₁)/(m + n)], [(my₂ + ny₁)/(m + n)]
By substituting the given parameters into the formula for line ratio, we have;
M(x, y) = [(5(2) + 4(-6))/(5 + 4)], [(5(-11) + 4(-2))/(5 + 4)]
M(x, y) = [(10 - 24)/(9)], [(-55 - 8)/9]
M(x, y) = [-14/9], [(-63)/9]
M(x, y) = (-1.6, -7)
Read more on line ratio here: brainly.com/question/14457392
#SPJ1
Missing information:
The question is incomplete and the complete question is shown in the attached picture.
Please help
Use the photo/link to help you
A. 105°
B. 25°
C. 75°
D. 130°
Answers
Answer:
C. 75°
Step-by-step explanation:
You want the angle marked ∠1 in the trapezoid shown.
TransversalWhere a transversal crosses parallel lines, same-side interior angles are supplementary. In this trapezoid, this means the angles at the right side of the figure are supplementary:
∠1 + 105° = 180°
∠1 = 75° . . . . . . . . . . . . subtract 105°
__
Additional comment
The given relation also means that the unmarked angle is supplementary to the one marked 50°. The unmarked angle will be 130°.
<95141404393>
Find the distance between the pair of parallel lines with the given equations. (Lesson 3-6)
y=1/2x+7/2y=1/2x+1
Answers
The distance between the pair of parallel lines with the equations y = (1/2)x + 7/2 and y = (1/2)x + 1 is 1.67 units.
To find the distance between two parallel lines, we need to determine the perpendicular distance between them. Since the slopes of the given lines are equal (both lines have a slope of 1/2), they are parallel.
To calculate the distance, we can take any point on one line and find its perpendicular distance to the other line. Let's choose a convenient point on the first line, y = (1/2)x + 7/2. When x = 0, y = 7/2, so we have the point (0, 7/2).
Now, we'll use the formula for the perpendicular distance from a point (x₁, y₁) to a line Ax + By + C = 0:
Distance = |Ax₁ + By₁ + C| / √(A² + B²)
For the line y = (1/2)x + 1, the equation can be rewritten as (1/2)x - y + 1 = 0. Substituting the values from our point (0, 7/2) into the formula, we get:
Distance = |(1/2)(0) - (7/2) + 1| / √((1/2)² + (-1)²)
= |-(7/2) + 1| / √(1/4 + 1)
= |-5/2| / √(5/4 + 1)
= 5/2 / √(9/4)
= 5/2 / (3/2)
= 5/2 * 2/3
= 5/3
= 1 2/3
= 1.67 units (approx.)
Therefore, the distance between the given pair of parallel lines is approximately 1.67 units.
To know more about calculating the distance between parallel lines, refer here:
https://brainly.com/question/12947822#
#SPJ11
Determine the first three nonzero terms in the Taylor polynomial approximation for the given initial value problem. x ′′
+8tx=0;x(0)=1,x ′
(0)=0 The Taylor approximation to three nonzero terms is x(t)=+⋯.
Answers
The first three nonzero terms in the Taylor polynomial approximation for the given initial value problem are: 1 - t^2/8 + t^4/128.
Given the initial value problem: x′′ + 8tx = 0; x(0) = 1, x′(0) = 0. To find the first three nonzero terms in the Taylor polynomial approximation, we follow these steps:
Step 1: Find x(t) and x′(t) using the integrating factor.
We start with the differential equation x′′ + 8tx = 0. Taking the integrating factor as I.F = e^∫8t dt = e^4t, we multiply it on both sides of the equation to get e^4tx′′ + 8te^4tx = 0. This simplifies to e^4tx′′ + d/dt(e^4tx') = 0.
Integrating both sides gives us ∫ e^4tx′′ dt + ∫ d/dt(e^4tx') dt = c1. Now, we have e^4tx' = c2. Differentiating both sides with respect to t, we get 4e^4tx' + e^4tx′′ = 0. Substituting the value of e^4tx′′ in the previous equation, we have -4e^4tx' + d/dt(e^4tx') = 0.
Simplifying further, we get -4x′ + x″ = 0, which leads to x(t) = c3e^(4t) + c4.
Step 2: Determine the values of c3 and c4 using the initial conditions.
Using the initial conditions x(0) = 1 and x′(0) = 0, we can substitute these values into the expression for x(t). This gives us c3 = 1 and c4 = -1/4.
Step 3: Write the Taylor polynomial approximation.
The Taylor approximation to three nonzero terms is x(t) = 1 - t^2/8 + t^4/128 + ...
Therefore, the starting value problem's Taylor polynomial approximation's first three nonzero terms are: 1 - t^2/8 + t^4/128.
Learn more about Taylor polynomial
https://brainly.com/question/30481013
#SPJ11
1 hectare is defined as 1 x 10^4 m^2. 1 acre is 4.356 x 10^4 ft. How many acres are in 2.0 hectares? (Do not include units in your answer).
Answers
There are approximately 0.4594 acres in 2.0 hectares.
To solve this problemWe need to use the conversion factor between hectares and acres.
Given:
[tex]1 hectare = 1[/tex] × [tex]10^4 m^2[/tex]
[tex]1 acre = 4.356[/tex] × [tex]10^4 ft[/tex]
To find the number of acres in 2.0 hectares, we can set up the following conversion:
[tex]2.0 hectares * (1[/tex] × [tex]10^4 m^2 / 1 hectare) * (1 acre / 4.356[/tex] × [tex]10^4 ft)[/tex]
Simplifying the units:
[tex]2.0 * (1[/tex] × [tex]10^4 m^2) * (1 acre / 4.356[/tex] ×[tex]10^4 ft)[/tex]
Now, we can perform the calculation:
[tex]2.0 * (1[/tex] × [tex]10^4) * (1 /[/tex][tex]4.356[/tex] ×[tex]10^4)[/tex]
= 2.0 * 1 / 4.356
= 0.4594
Therefore, there are approximately 0.4594 acres in 2.0 hectares.
Learn more about conversion factor here : brainly.com/question/28308386
#SPJ4
I need help with this question
Answers
Answer:
Radius is [tex]r\approx4.622\,\text{ft}[/tex]
Step-by-step explanation:
[tex]V=\pi r^2h\\34=\pi r^2(5)\\\frac{34}{5\pi}=r^2\\r=\sqrt{\frac{34}{5\pi}}\\r\approx4.622\,\text{ft}[/tex]