Answer:
D
Explanation: Trust me
The triple beam balance measures the mass of an object in grams.
Explanation:
A triple beam balance is an instrument used in labs to measure the mass of a substance or an object.It measures the mass in units of grams.It consists of three beams with a different set of increments in grams. which are:Middle beam = Increments of 100 grams
Front beam = Increments from 0 grams to 10 grams
Farther beam = Increments of 10 grams
So, from this, we can conclude that the triple beam balance measures the mass of an object in grams. Hence the correct answer is option A.
Learn more about triple beam balance here:
https://brainly.com/question/12149442
how does wind energy combined with machines cause a sailboat to move?
marking as brainliest
Answer:
The wind pushes the sails from behind, causing the boat to move forward.
Answer:
Wind energy obtained by the machine is converted into kinetic energy as it functions and thus enabling the boat to move.
Together, the forces of drag, from the water, and the pressure from the wind against the sail itself push the craft forward. Angling too sharply into the wind causes the forces on the boat to become unbalanced, and moves the boat sideways in the water.
16.1 g of bromine are mixed with 8.42 g of chlorine to give an actual
yield of 21.1 g of bromine monochloride.
The question is complete, the complete question is;
16.1g of bromine are mixed with 8.42g of chlorite to give an actual yield of 21.1g of bromine monochloride.
Answer:
91 %
Explanation:
Br2 + Cl2 ------>2BrCl
Number of moles of Chlorine = 8.42/71 = 0.119 moles
If 1 mole of Cl2 yields 2 moles of BrCl
0.119 moles of Cl2 will yield 0.119 moles * 2/1 = 0.238 moles of BrCl
Number of moles of Br2 reacted = 16.1/160 = 0.1 moles
If 1 mole of Br2 yielded 2 moles of BrCl
0.1 moles of Br2 yields 0.1 * 2/1 = 0.2 moles of BrCl
Bromine is the limiting reactant.
Mass of BrCl produced = 0.2 moles * 115.357 g/mol = 23.07 g
Theoretical yield = 23.07 g
Actual yield = 21.1 g
Percentage yield = Actual yield/Theoretical yield * 100
= 21.1/23.07 * 100 = 91 %
Which of the following is TRUE about a physical change to a substance?
A.
The atoms in a substance will divide.
B.
The mass of a substance will increase.
C.
New substances will likely be formed.
D.
The substance will have the same chemical properties.
Answer:
D.
The substance will have the same chemical properties.
Explanation:
Physical changes do not alter the chemical composition of a substance, so the chemical properties will not change.
I can't leave till I answer please help!!
Answer:
The answer is 2 all you do is divide the 6.02 and 3.01 and you get 2
How many moles in 0.672L of F2?
Answer:
c
Explanation:
i think if not tell me ok
Who coined the term "ridgeology"?
Answer:
David R. Ashbaugh
Explanation:
David R. Ashbaugh is a Canadian police officer known for his extensive research on the friction ridge identification, introducing for the first time the use of the term ridgeology in forensic identification and the ACE-V methodology.
What is the partial pressure of hydrogen gas in a mixture of hydrogen Nitrogen, and helium if the total pressure is 700 partial pressure is 155 mmHg, and the partial pressure of nitrogen is 265 mmHg?
On earth what is the main force that resists all motion?
Answer: Friction
Explanation: Friction is a force that opposes motion. When two objects are in contact, friction is acts in a direction opposite to the motion of the object. Please give me brainliest!!!!!!!
Answer: friction: The resistance an object meets when moving over a surface or through a gas or liquid; it is the force that resists the motion of two surfaces that are touching each other.
Explanation:
Which of the following best defines base isolation?(1 point)
Base isolation is a technique used by engineers to help prevent damage to buildings by volcanoes. The main structure of the building is separate from the base, which allows lava to pass under the building without causing much damage.
Base isolation is a technique used to prevent large-scale damage from volcanoes. New communities being built are set as far back as possible from the base of a volcano.
Base isolation is a technique used to prevent damage to buildings during tsunamis. The main structure of the building is separate from the base, which allows water to pass beneath buildings without causing much damage.
Base isolation is a technique used by engineers to help prevent damage to buildings by earthquakes. The main structure of the building is separate from the base and sits on a bed of springs.
Base isolation is a technique used by engineers to help prevent damage to buildings by earthquakes. The main structure of the building is separate from the base and sits on a bed of springs.
What is base isolation?Base isolation is a technique developed to prevent or minimise damage to buildings during an earthquake.
A base isolation system is a method of seismic protection where the structure (superstructure) is separated from the base (foundation or substructure). By separating the structure from its base the amount of energy that is transferred to the superstructure during an earthquake is reduced significantly.
Hence, option D is correct.
Learn more about base isolation here:
https://brainly.com/question/11337994
#SPJ2
If a cluster of stars is all the same color, what could that mean?
Answer:
Cluster HR Diagrams: Since all the stars in a cluster formed at the same time, they are all the same age. A very young cluster will have a HR diagram with a cluster of T-Tauri stars evolving towards the main sequence. ... Each star is plotted by its color and magnitude on the HR diagram.
The pendulum has the greatest kinetic energy and no potential energy when it is _____.
swinging upward
at the top of the swing
at the bottom of the swing
swinging downward
Answer:
At the top of the swing
Explanation:
is CH3CH2COOCH2 an aldehyde structure?
CAn someone help me with this?
Answer:
I think D. sorry if I'm wrong:)
The balanced chemical equation for the reaction of nitrogen (N2) and hydrogen (H) to form ammonia (NH3) is given below.
N2+ 3H2 + 2NH3
How many grams of hydrogen would be to react with 14.0 g of nitrogen?
Answer:
V= 33.6L
Explanation:
The reaction between hydrogen and nitrogen is
3H2(g) + N2(g) + 2NH3(g)
2 points
Stu Dent wants to create a salt water solution. He uses 0.614 moles of salt and 182 milliliters of water. What is the molarity of the solution?
Type your answer...
Answer: The molarity of solution is 3.37 M
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute = 0.614
[tex]V_s[/tex] = volume of solution in ml = 182 ml
Now put all the given values in the formula of molarity, we get
[tex]Molarity=\frac{0.614\times 1000}{182}=3.37M[/tex]
Therefore, the molarity of solution is 3.37 M
PLEASE
Why don't the particles in a solid move past one another?
A. They have no motion and cannot even vibrate in place.
B. They don't have enough energy to overcome the attractions
between them.
C. They bounce off the walls of their container and back into place.
D. They move independently of one another.
Answer:
B. They don't have enough energy to overcome the attractions between them.
Answer:They don't have enough energy to overcome the attractions
between them.
Explanation:
A. They have no motion and cannot even vibrate in place.
B. They don't have enough energy to overcome the attractions
between them.
C. They bounce off the walls of their container and back into place.
D. They move independently of one another.
10. Lead nitrate solution mixed with sodium sulfate solution forms lead sulfate as a
precipitate.
Pb(NO3)2+ Na2SO4-
PbSO4+ 2NaNO3
In an experiment, the theoretical yield of lead sulfate for this reaction was 2.85 g.
In the experiment only 2.53 g of lead sulfate is obtained.
Calculate the percentage yield of lead sulfate in this experiment. * IT
Answer:
88%.
Explanation:
The percentage yield of lead sulfate in this experiment is 88% if 2.53 is divided by 2.85 and multiply by 100. The percentage yield can be calculated when the experimental yield is divided by theoretical yield and then multiply by 100. The percentage yield tells us about the actual yield that is gained in the end of experiment which is lower than theoretical yield.
Meiosis does PMAT twice! That means there is prophase I and prophase II. There is metaphase I and metaphase II. If the cartoon below has chromosomes in the middle of the cell, how would you know whether it was in metaphase I or metaphase II?
Answer:
- there are homologous chromosomes in the middle of the cell (metaphase I)
- there are sister chromatids in the middle of the cell (metaphase II).
Explanation:
At what temperature is breathing rate the highest? *
10 c
15 c
20 c
25 c
Answer:
Depends on what you're doing, you could be running and it goes higher, temperature isn't too much of a difference.
Explanation:
Is changing the color of the coin from copper to silver a physical or chemical change?
Answer:
physical
Explanation:
The zinc (which was already silver) coated the penny. The NaOH dissolved the zinc. (that was what made the water murky) And small pieces of zinc adhered to the penny (coated) It was a physical change because no NEW color was created.
When bonds are (broken/formed) there is a positive energy change.
Answer: Hello i am confused are you asking a question?
Explanation:
2NazN + 3MgO -> Mg3N2 + 3Na2O, what is the mole ratio of magnesium oxide to magnesium nitride?
Answer:
3:1 or 3/1
Explanation:
Look at the coefficients then set up ratio. Simplify to the base numbers and you get 3/1 or 3:1. Thus, for every 3 MgO you produce 1 Mg3N2
List the stages of the Flowering Plant Life Cycle starting with the seed
BRAINLIEST! A reaction is set up between magnesium and hydrochloric acid. After 30 seconds, the magnesium had decreased in mass by 45g. What was the rate of this reaction?
Answer:
Acidic oxides, or acid anhydride, are oxides that react with water to form an acid, or with a base to form a salt. They are oxides of either nonmetals or of metals in high oxidation states.
Explanation:
11. How many moles of O2 can be produced by letting 12.00 moles of
KCIO3 react?
2KCIO2 → 2KCI + 30,
A. 18 mol 02
B. 36 mol 02
C. 1.5 mol 02
D. 6 mol 02
Answer:
Molarity of the solution = 0.08 M
Further explanation
Molarity is a way to express the concentration of the solution
Molarity shows the number of moles of solute in every 1 liter of solute or mmol in each ml of solution
Where
M = Molarity
n = Number of moles of solute
V = Volume of solution
0.5 lb=226,796 g
MW silver nitrat - AgNO₃ = 169,87 g/mol
mol AgNO₃ :
Molarity :
What is the answer for 250 K = ? °C
Answer:
This is your answer ☺️☺️☺️
Answer:
-23.15
Explanation:
Is neon an atom or ion
A student wants to make 50-mL of a 0.6 mg/L solution of acetic acid. She will be making the solution by diluting a stock with a concentration of 2.0 mg/L. Put the steps for her dilution in order. 4. Cap the flask and invert several times to mix. 2. Fill the volumetric flask with deionized water until the meniscus touches the mark. 6. Swirl the flask to mix the contents. 1. Obtain a 50-mL volumetric flask. 3. Use a pipet to add the appropriate volume of stock solution to the flask. 2. Add approximately 10 mL of deionized water to the empty flask.
Answer:
The steps in order are;
1. Obtain a 50-mL volumetric flask
2. Add approximately 10 mL of deionized water to the empty flask
3. Use a pipet to add the appropriate volume of stock solution to the flask
4. Cap the flask and invert several times to mix
5. Fill the volumetric flask with deionized water until the meniscus touches the mark
6. Swirl the flask to mix the contents
The volume of the acetic acid to be added to the solution is 15 mL
Explanation:
The given steps are;
4. Cap the flask and invert several times to mix
5. Fill the volumetric flask with deionized water until the meniscus touches the mark
6. Swirl the flask to mix the contents
1. Obtain a 50-mL volumetric flask
3. Use a pipet to add the appropriate volume of stock solution to the flask
2. Add approximately 10 mL of deionized water to the empty flask
The given parameters are;
The volume of the volumetric flask = 50-mL
The concentration of the final solution of acetic acid = 0.6 mg/L
The concentration of the stock solution = 2.0 mg/L
Let 'x' represent the volume of the stock solution added, we have;
2.0 mg/L·x + (50 - x)×0 = 0.6 mg/L × 50-mL
x = 0.6 mg/L × 50-mL/(2.0 mg/L) = 15 mL
The volume of the stock solution to be added, x = 15 mL
Which of the following general trends are true for the atomic mass of elements in the periodic table?
1. The atomic mass is usually a decimal number.
II. The atomic mass is always smaller than the atomic number.
III. The atomic mass increases from top to bottom down a group.
IV. The atomic mass increases from left to right across a period.
HELP PLEASE THERE IS NO PICTURE PLZ JUST LEAVE THE ANSWER!!
Answer:
D. the atomic mass increases from left to right
Explanation:
Gaseous ethane CH3CH3 reacts with gaseous oxygen gas O2 to produce gaseous carbon dioxide CO2 and gaseous water H2O. What is the theoretical yield of carbon dioxide formed from the reaction of 1.8g of ethane and 4.6g of oxygen gas?
Answer:
mass of CO₂ produced = 5.06 g of CO₂
Explanation:
Equation of the reaction: 2CH₃CH₃ + 5O₂ ---> 4CO₂ + 6H₂O
From the equation of the reaction, 2 moles of gaseous ethane reacts with 5 moles of oxygen gas to produce 6 moles of water.
molar mass of ethane = 30 g/mol
molar mass of oxygen gas = 32 g/mol
number of moles of ethane present in 1.8 g = 1.8/30 = 0.06 moles
number of moles of oxygen gas present in 4.6 g = 4.6/32 = 0.14375 moles
mole ratio of oxygen gas to ethane = 2.4 : 1
Therefore, oxygen is the limiting reactant
0.14375 moles of oxygen will react with 0.06 moles of ethane to produce 4/5 * 0.14375 moles of CO₂ = 0.115 moles of CO₂
molar mass of CO₂ = 44 g/mol
mass of CO₂ produced = 0.1725 * 44
mass of CO₂ produced = 5.06 g of CO₂