Answer:
B
Explanation:
because Phloem tissue consists of a group of specialized cells. Sieve tubes are elongated tubular conducting channels of phloem through which food is transported. The contents of phloem can move in the upward as well as in the downward direction. Therefore, they form two-way traffic in plants.
Answer:
Phloem
Explanation:
Xylem transports water by action of trandpiriation pull, capillary action and root pressure. Phloem consists of sieve tubes and companion cells. The phloem is made of tubes and cells basically.
Uranium contains two isotopes, U-235 with an atomic mas of 235 g/mol, and u-238 with an atomic mass of 238g/mol. U-235 is needed
as a fuel in nuclear reactors. Until recently, the method used to separate U-235 from U-238 was by gas diffusion. Use U-235 as R1, and
U-238 as R2 and determine the rate of diffusion and which gas will diffuse faster.
⚪︎U-235 diffused 10.01 times faster than U-238
⚪︎U-235 diffused 1.01 times slower than U-238
⚪︎U-235 effused 2.01 times slower than U-238
⚪︎U-235 effused 1.01 times faster than U-238
⚪︎U-235 diffused 1.01 times faster than U-238
Answer:
the answer is in the image
Explanation:
____ NaBr + ____ Ca(OH)2 ___ CaBr2 + ____ NaOH
Answer:
2 NaBr + 1 Ca(OH)2 ---> 1 CaBr2 + 2 NaOH
which of the two metal ions mg2+ and zn2+ is the most reactive why?
Answer:
Mg2+
Explanation:
The most reactive ions from the given choices is the magnesium ion. This is because it is higher in the activity series of metals.
Zinc ion is below this specie in the activity series.
As a rule, ions above another on the activity series are generally more reactive than those below.
From any solution, magnesium ion will displace the zinc ion in such process.
The position of metallic ions determines their reactivity.
how many atoms are in sodium hydroxide
Answer:6 atoms
Explanation:Each NaOH has one Na and one O and one H. Therefore, 2 NaOH has 6 atoms.
Answer:
Three atoms
Explanation:
Hope this helps
When can I use ideal gas law?
Plz help me it is so confusing
The total number of the elements above with 2 valence electron is ____.
Answer:
four elements
Explanation:
He = 1s²
Be = 1s² 2s²
C = 1s² 2s² 2p²
Mg = 1s² 2s² 2p⁶ 3s²
Si = 1s² 2s² 2p⁶ 3s² 3p²
Ca = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s²
Valence electrons are those electrons which are present in outer most electronic shell.
He, Be, Mg, Ca these four elements have 2 valence electrons.
While Si and C have four valance electrons.
The total number of the elements above with 2 valence electron is four.
The electronic configurations of the elements are given:
He = 1s²
Be = 1s² 2s²
C = 1s² 2s² 2p²
Mg = 1s² 2s² 2p⁶ 3s²
Si = 1s² 2s² 2p⁶ 3s² 3p²
Ca = 1s² 2s² 2p⁶ 3s² 3p⁶ 4s²
Valence electrons are those electrons which are present in outer most electronic shell.
He, Be, Mg, Ca these four elements have 2 valence electrons.Learn more:
brainly.com/question/16089134
3. A 240 mL sample of argon gas at 270 K is cooled until the volume is 180 mL. What is the new temperature?
Answer:
202.5 K
Explanation:
Under which conditions will sugar most likely dissolve fastest in a cup of water?
A. A sugar cube with stirring at 5°C
B. A sugar cube without stirring at 15°C
C. Sugar crystals with stirring at 15°C
D. Sugar crystals without stirring at 5°C
Answer:
The correct answer would be C
Explanation:
Plz correct me if wrong
The condition in which sugar is most likely to dissolve fastest in a cup of water is when sugar crystals with stirring at 15°C. Therefore, option C is correct.
What conditions are required for dissolution?Dissolution is the process by which a solute dissolves in a solvent to form a homogeneous mixture called a solution. The conditions required for dissolution are:
Agitation: The solute and solvent must be mixed together so that they come into contact with each other.Temperature: Increasing the temperature of the solvent increases the kinetic energy of its molecules, making it easier for the solute to dissolve.Pressure: Increasing the pressure of a gas above a liquid solvent can force more gas molecules into the solvent, increasing its solubility.Surface area: The rate of dissolution is directly proportional to the surface area of the solute particles exposed to the solvent. Polarity: A solute will dissolve in a solvent that has similar polarity.Thus, option C is correct.
Learn more about dissolution, here:
https://brainly.com/question/9949108
#SPJ5
An object at rest has equal forces acting on it. This can be described as a __________ force.
BRAINLIEST!! PLZ HELP
Answer:
1.0 is Answer
Explanation:
May be this is helpful!
which term refers to the condition that exists when no over all change in concentration results from diffusion?
a. concentration
b. osmosis
c. equilibrium
d. randomness
Answer:
a.cocentration es la respuesta
Wass, volume and density are all properties of
matter
3
weight.
formula
Answer:
:)
Explanation:
They are all properties of Matter. weight and formula wouldn't make sense.
How many formula units are in 2.5 moles of NaCl?
Answer: 1.5 x 10 24
Explanation:
One mole of NaCl contains 6.022 x 1023 NaCl formula units
In 2.5 moles of NaCl there will be basically 5 moles of ions as per the given data.
What is a compound?A material created by joining two or more distinct elements chemically in science.
A compound in chemistry is a material comprised of two or more separate chemical elements mixed together in a certain proportion.
Chemical connections that are challenging to break are created when the elements interact with one another.
2.5 mol of NaCl contains 5 moles of ions. This is due to the fact that 1 mol of NaCl contains 2 mol of ions, so you must multiply the molecular weight of the molecule by two to obtain the number of ions.
Thus, the answer is 5 moles.
For more details regarding a compound, visit:
https://brainly.com/question/13516179
#SPJ5
A 0.200 M NaOH solution was used to titrate a 18.25 mL HE
solution. The endpoint was reached after 31.20 mL of titrant
were added. Find the molar concentration of the original HF
solution.
Answer:
M₂ = 0.34 M
Explanation:
Given data:
Molarity of NaOH =M₁ = 0.200 M
Volume of HF =V₂= 18.25 mL
Volume of NaOH added = V₁ = 31.20 mL
Molarity of HF solution = M₂ = ?
Solution:
M₁V₁ = M₂V₂
by putting values,
0.200 M × 31.20 mL = M₂ × 18.25 mL
M₂ = 0.200 M × 31.20 mL / 18.25 mL
M₂ = 6.24 M.mL / 18.25 mL
M₂ = 0.34 M
Question 8 (1 point)
Use coefficients to balance the following reaction:
H2CO3 + Fe → Fe2(CO3)3 + H2
Blank 1:
Blank 2:
Blank 3:
Blank 4:
Answer:
1) 3 2) 2 3) 1 4) 3
Explanation:
so on the reactant side (left), there is 2 H, 1 CO3, and 1 Fe. On the product side (right) there is 2 Fe, 3 CO3, and 2 H2. So to start I added a 3 in the first blank to make CO3 equal on both sides. In doing this, there is not 2 H, there is now 6 so I added a 3 in the 4th blank. Currently, H and CO3 are equal on both sides but not Fe. So I added a 2 in the 2nd blank. I didn't add anything in the 3rd blank so it is an understood 1.
The balanced equation
3H₂CO₃ + 2Fe → Fe₂(CO₃)₃ + 3H₂
Further explanationGiven
Reaction
H₂CO₃ + Fe → Fe₂(CO₃)₃ + H₂
Required
Coefficient of the reaction
Solution
Give a coefficient(the most complex = 1)aH₂CO₃ + bFe → Fe₂(CO₃)₃ + cH₂
Make an equationPrioritize balancing the elements that form the most complex compounds
Fe, left = b, right = 2⇒b=2
C, left = a, right = 3⇒a=3
H, left = 2a, right = 2c⇒2a=2c⇒2.3=2c⇒6=2c⇒c=3
The equation becomes :
3H₂CO₃ + 2Fe → Fe₂(CO₃)₃ + 3H₂
Which of the following statements best describes how metamorphic rock was formed?
A. Low temperature and low pressure may transform an igneous rock into a metamorphic rock with banded layers.
B. High temperature and intense pressure may transform an igneous rock into a metamorphic rock with banded layers.
C. Low temperature intense pressure may transform a sedimentary rock into a metamorphic rock with banded layers.
Answer:
High temperature and intense pressure may transform an igneous rock into a metamorphic rock with banded layers.
Explanation:
A metamorphic rock is formed under high temperature and intense pressure may transform an igneous rock into a metamorphic rock with banded layers.
An igneous rock is often formed when molten magma erupts from the earth's crust. The molten magma is usually very hot but cools off with time to form a solid mass.
This rock that was first formed eventually gets transformed in the course of time as it is acted upon by high temperature and intense pressure which gradually transforms the igneous rock into a metamorphic rock with banded layers.
Learn more: https://brainly.com/question/19930528
Calculate the maximum mass of aluminium which can be extracted from 10 kg of
aluminium oxide
2AlO3+ 3C ----->4Al + 3CO2
Answer:
Hrishikesh. bshjsjbd. jwjjja
How many moles of nitrogen are in 9.82x10^23 formula units of nitrogen? Please show work!
Answer:
1.63 mols
Explanation:
to convert mols to formula unit, or formula unit to mols, u need the avagadros number which is 6.022*10^23 and the number of mols/formula units
so since the given is formula units, u just have to divide the number by 6.022*10^23 to get the amount of mols
9.82*10^23 / (6.022*10^23) = 1.63 mols
*be careful for sig figs
does something that is hot have more thermal energy than something that’s cold?
Answer:
Yes it does because the atoms/molecules are moving faster than they are in a cold substance.
Explanation:
17. Calculate the percent composition of B2Br6
Answer:
%composition of B₂ = 4.3%
%composition of Br₆ = 95.7%
Explanation:
Given data:
Percent composition of B₂Br₆ = ?
Solution:
Total mass of B₂Br₆ = 10.8×2 + 79.9×6 = 501 g/mol
%composition of B₂ = ( 21.6 g/ 501 g ) × 100
%composition of B₂ = 0.043 × 100
%composition of B₂ = 4.3%
%composition of Br₆ = ( 479.4 g/ 501 g ) × 100
%composition of Br₆ = 0.957 × 100
%composition of Br₆ = 95.7%
Describe subscripts in chemical equations.
If a concentrated solution of acetic acid is 99.5 % HC 2 H 3 O 2 and has a density of 1.05 g/mL, what is the concentration of this acid in moles per litre?
The concentration of this acid in moles per litre : 17.41
Further explanationGiven
99.5% acetic acid
density=ρ=1.05 g/ml
Required
the concentration (mol/L)
Solution
99.5% dan density 1.05 g/ml (MW acetic acid = 60 g/mol)
[tex]\tt 99.5\%\times 1.05\dfrac{g}{ml}\times \dfrac{1000~ml}{L}=1044.75~g/L\\\\\dfrac{1044.75~g/L}{60~g/mol}=17.41~mol/L[/tex]
Dry ice changes from a solid to a gas in a process known as A. Melting B. Freezing C.sublimation
Answer:
c
Explanation:
solid to gas directly
how can you tell which compound in a solution is the solvent?
(own words please)
Answer:
The way you can know which compound in a solution is a solvent is by usually just determining which substance is a solute and which is a solvent. The solute is when it is dissolved and it takes on the characteristics of the solvent.
Explanation:
Hope this helps!
A parent with freckles is crossed with a parent without freckles. The Punnett square shows the possible genotypes and phenotypes of the offspring. Which statement accurately describes the probability of phenotypes?
Answer: The likelihood of the offspring having freckles and not having freckles is the same.
Explanation:
Freckles are tiny brown spots on your skin, often in areas that get sun exposure. freckles are harmless. They shape as a consequence of melanin overproduction, which is responsible for skin and hair color (pigmentation). Overall, freckles derive from ultraviolet (UV) light stimulation.
Answer:
The likelihood of the offspring having freckles and not having freckles is the same.
Explanation:
just did it
1. List the types of fronts found on this map
Answer:
Cold Front. A side view of a cold front (A, top) and how it is represented on a weather map (B, bottom). ...
Warm Front. ...
Stationary Front. ...
Occluded Front.
Explain Joule's law in your own words. pls help
Answer:
Joules first law is a law that expresses the relatioship between heat that is generated and the current flowing heat thats through a conductor. The second law says that internal energy is independent of volume and pressure, depending only on temperature!
Explanation:
How much of earth's freshwater is in the solid state or under ground?
That would be B: 33%, but please correct me if I'm wrong ^^
Answer:
that would be b:33 i believe pls dont blame met
Some metal chips with a total volume of 3.29 cm3 are placed on a piece of paper and weighed. The combined mass is found to be 18.43 g, and the paper itself weighs 1.2140 g. Calculate the density of the metal to the proper number of significant figures.
Answer:
d = 5.23 g/cm³
Explanation:
Given data:
Volume of metal chips = 3.29 cm³
Mass of metal chips and paper = 18.43 g
Mass of paper = 1.2140 g
Density of metal = ?
Solution:
Mass of metal = combined mass - mass of paper
Mass of metal = 18.43 g - 1.2140 g
mass of metal = 17.22 g
Density:
d = mass/ volume
d = 17.22 g/ 3.29 cm³
d = 5.23 g/cm³