Answer:
speed is distance covered by body at certain or per time.
SI unit m/s
formula:
speed =distance covered/time taken
What benefits can you gain as you engage yourself with latin dances?
Answer:
hispanic popularity
Explanation:
:)
Answer these questions please and you will get the brain list
I am using the equation F=ma (force equals mass times acceleration) to solve these problems.
1. You are looking for force, and have mass and acceleration. You just plug in the values for mass and acceleration to get the force needed.
F=(15kg)(5m/s^2)
F=75N
2. Again, you are looking for force, and just need to plug in the values for mass and acceleration
F=(3kg)(2.4m/s^2)
F=7.2N
3. In this problem, you have force and mass, but need to find acceleration. To do this, you need to get acceleration alone on one side of the equation - divide each side by m. Your equation will now be F/m=a
a=(5N)/(3.7kg)
a=18.5m/s^2
I did not use significant figures. Let me know if you need to do that and need any help on that. Hope this helps!
1. What are Three Things you would build differently if you were to build the rocket again?
2. What are Two Things you could do to improve the flight of your rocket?
3. What practical design advice would you give to future students building a paper rocket for the first time?
1 ; Components. Rockets consist of a propellant, a place to put propellant (such as a propellant tank), and a nozzle.
2; The aerodynamic shape of the nose cone helps prevent air from slowing the rocket. The fins help guide the rocket to fly straight. Finally, the propellant system includes a mixture of fuel and a chemical called an "oxidizer" that gives off oxygen. The fuel and oxidizer burn together to launch the rocket off the ground.
3; At supersonic speeds (faster than the speed of sound), the best shape is a narrower and sharper point. Rockets with a larger diameter have more drag because there is more air being pushed out of the way
if a person can jump maximum along distance of 3m ,on the earth how far could be jump on the moon where acceleration due to gravity is 1÷16 of that on the earth
Answer:
The person can jump 48 m on the Moon
Explanation:
The question parameters are;
The maximum long jump distance of a person on Earth, [tex]R_{max}[/tex] = 3 m
The acceleration due to gravity on the Moon = 1 ÷ 16 of that on Earth
The distance the person can jump on the Moon is given as follows;
A person performing a jump across an horizontal distance on Earth (under gravitational force) follows the path of the motion of a projectile
The horizontal range, [tex]R_{max}[/tex], of a projectile motion is found by using the following formula
[tex]R_{max} = \dfrac{u^2}{g}[/tex]
Where;
g = The acceleration due to gravity = 9.8 m/s²
Therefore, we have;
[tex]R_{max} = 3 \, m = \dfrac{u^2}{9.8 \, m/s^2 }[/tex]
u² = 3 m × 9.8 m/s² = 29.4 m²/s²
Therefore, on the Moon, we have;
The acceleration due to gravity on the Moon, [tex]g_{Moon}[/tex] = 1/16 × g
∴ [tex]g_{Moon}[/tex] = 1/16 × g = 1/16 × 9.8 m/s² ≈ 0.6125 m/s²
[tex]R_{max \ Moon} = \dfrac{u^2}{g_{Moon}} = \dfrac{29.4 \ m^2/s^2}{0.6125 \, m/s^2 } \approx 48 \, m[/tex]
The maximum distance the person can jump on the Moon with the same velocity which was used on Earth is [tex]R_{max \ Moon}[/tex] ≈ 48 m
PLEASEEE HELP ASAP!!!!!
Answer:
h = 2.15 m
Explanation:
We can use the third equation of motion here to find out the height from which the cat fell that is the height of the refrigerator.
[tex]2gh = v_{f}^2 - v_{i}^2[/tex]
where,
g = acceleration due to gravity = 9.81 m/s²
h = height of refrigerator = ?
vf = final speed of cat = 6.5 m/s
vi = initial speedof cat vertically = 0 m/s
Therefore,
[tex]2(9.81\ m/s^2)h = (6.5\ m/s)^2 - (0\ m/s)^2\\h = \frac{(6.5\ m/s)^2}{(2)(9.81\ m/s^2)}[/tex]
h = 2.15 m
What do we call the energy that is transferred to
a substance without the substance's temperature
changing?
Answer:
Latent heat
Latent heat is the heat needed to change a state without a change in temperature.
Explanation:
Hope this helps :D
What is described as a special class of materials that conduct electric charge better than electrical insulators but not as well as electrical conductors?
magnets
ions
Semiconductors
isotopes
pls help and sorry for the spam
Answer: I think ions I’m not 100% sure if it’s not let me know
Explanation:
identify global climate zones and characteristics of each
research the different time zone around the world, and characteristics of each
+
CaCl 2
+
_C2HCl3
C2H2C14
H 20
+
Ca(OH) 2 →
What are two properties that lead to ElectroMagnetic Interactions? please help this is due very soon!!!
Answer:
Electric charge. A fundamental property that leads to the electromagnetic interactions among particles that make up matter.
Which product forms from the synthesis reaction between barium (Ba) and
oxygen (O)?
Answer:
C. BaO
Explanation:
Answer:
C. BaO
Explanation:
aPe.x
The increasing speed of a falling object is caused by
gravity
force
mass
speed
(pick one)
Answer:
gravity
Explanation:
Technically it would be mass or speed because it depends on ow big or small it is, but if you break it down it will be due to gravity as it gets stronger
What increase in temperature is needed to increase the length of an aluminum meterstick by 1.0 mm?
42 K
24K
Answer:
42k
Explanation:
The increase in temperature is needed to increase the length of an aluminum meter-stick by 1.0 mm is 42 K. The option 1 is the correct option.
What is thermal expansion?Thermal expansion is the property of the matter to change its shape, size, length, volume, density etc with change in the temperature.
The thermal expansion can be calculate as,
[tex]\Delta L=aL\Delta T[/tex]
Here, [tex]L[/tex] is the original length, [tex]\Delta T[/tex] is the change in the temperature and [tex]a[/tex] is the coefficient of the expansion.
Given information-
The change in the length of the aluminum mater-stick is 1.00 mm.
Let the initial size of the aluminium mater-stick is 1.00 m or 1000 mm . The thermal expansion coefficient of aluminium is [tex](2.4\times10^{-5})[/tex] per unit Kelvin.
Put the values in the above formula as,
[tex]1=(2.4\times10^{-5})\times 1000\times\Delta T[/tex]
Solve for temperature as,
[tex]\Delta T=\dfrac{1}{(2.4\times10^{-5})\times 1000} \\\Delta T=42K[/tex]
Hence the increase in temperature is needed to increase the length of an aluminum meter-stick by 1.0 mm is 42 K. The option 1 is the correct option.
Learn more about the thermal expansion here;
https://brainly.com/question/1166774
a car whose initial speed is 30 seconds m / s slows uniformly to a stop in 5.00 seconds what was the cars displacement
Answer:
60
Explanation:
Which conclusion about the atom can be drawn from Rutherford’s gold foil experiment?
A.Has a zero oxidation #
B.Has a neutral charge
C.Has a small negative center
D.Has a small positive center
What is the chemical name of SiF4? sulfur fluoride silicon fluoride sulfur tetrafluoride silicon tetrafluoride
Answer:
Silicon tetrafluoride
Explanation:
The symbol Si represents the element silicon, as shown in the periodic table.
The are 4 fluorines, so the prefix for fluoride must have tetra-
Please help me I don’t get how to do it!!! A ray of light has a wavelength
433 nm in water (n = 1.33). What
is its wavelength in a vacuum?
(Remember, the wavelength is longer in
a vacuum.)
(Unit = nm)
Answer:
The wavelength of the light in a vacuum is 575.89 nm
Explanation:
The given parameter in the are;
The wavelength of the ray of light in water, λ₁ = 433 nm
The refractive index of water, n₁ = 1.33
The relationship between wavelength, λ, and refractive index, 'n', is presented as follows;
λ₁·n₁ = λ₂·n₂
Where;
λ₁ and λ₂ are the wavelength of the wave within the two mediums
n₁ and n₂ are the respective refractive indices of the mediums
The refractive index of vacuum, n₂ = 1
Let λ₂ represent the wavelength of light in vacuum
Therefore, we have;
1.33 × 433 nm = 1 × λ₂
∴ λ₂ = 1.33 × 433 nm/1 = 575.89 nm
Therefore, the wavelength in a vacuum, λ₂ = 575.89 nm
Answer: 576
Explanation: Its correct for acellus!
HELP PLEASE!!! I HAVE TO GET THIS IN QUICK!!
Turning on and listening your favorite TV show is an example of
heat energy to light energy
sound energy to chemical energy
electrical energy to sound energy
light energy to kinetic energy
Answer:
Electrical Energy and Sound Energy
Explanation:
Compared to Earth's moon, the moons of Mars are
equal in size.
larger in size.
made of different substances.
smaller in size.
Time is a measure of:
Answer:
the time is measured with instrument such time,I hope this help
ANSWER PLEASE FAST I NEED IT
14.0.5 cm 13. wind speed surface area temperature
The pilot directs the aircraft to fly due north at 600km/h. A side-wind blows at
100km/h towards the east. What will be the aircraft's resultant velocity? (Give both its
speed and direction)
Answer:
678.2 km/h and 80.54° north of east
Explanation:
From the question,
Using pythagoras theorem,
a² = b²+c²..................... Equation 1
Where a = resultant velocity
Given: b = 600 km/h, c = 100 km/h
Substitute these values into equation 1
R² = 600²+100²
R² = 360000+10000
R² = 460000
R = √460000
R = 678.2 km/h.
And the direction is
tanθ = 600/100
tanθ = 6
tanθ = 6
θ = tan⁻¹(6)
θ = 80.54°.
Hence the resultant velocity of the aircraft is 678.2 km/h and 80.54° north of east
FAST PLEASE
Which of the best describes a societal law?
A) a rule made by a government
B) a statement about how things act in the natural world
C) a statement which is always true under the same conditions
D) a statement which describes a specific relationship under given conditions
hi..
its option C..
cuz everyone is equal before the law.. and no one an be discriminated on the basis of their gender, religion, caste, race, colour or anything!..
hope it helps:)
This force is a pull between all objects. It is the force that gives us weight here on Earth. And, if we throw a rock off of a cliff, it is the force that causes the rock to fall to Earth. What is this force?
Answer:
Gravity.
Explanation:
Gravity is considered to be a universal force of attraction which acts between all objects that has both mass, energy and occupy space. Therefore, it acts in such a way as to bring objects together.
Additionally, the gravity of earth makes it possible for all physical objects to possess weight.
This ultimately implies that, this force is a pull between all objects. It is the force that gives us weight here on Earth. And, if we throw a rock off of a cliff, it is the force that causes the rock to fall to Earth.
If an object straight down falls 30m in 2 sec , how far will falls in 4 sec , what is the tail wind and headwind
Answer:
60 sec
Explanation:
60m because in every 30min in 2sec so 30 × 2= 60 min
How is the conservation of renewable resources different from the conservation of nonrenewable resources
When someone asked you if you have a special talent.
Answer:
lowkeyyyy
explanation:
A physics teacher is reheating her leftover pizza lunch in the very old teacher breakroom microwave. The microwave is so old that it doesn't even turn the food as it cooks. When the teacher takes her food out and eats it, she discovers that parts of the pizza are scalding hot, while other parts are still very cold. She explains to the students that a microwave works by producing standing waves that result in heating. She asks the students to explain why some parts of the pizza are hot while others are still cold. Below are their responses:
Answer: At the antinodes of a standing wave, the wave is shaking very rapidly, causing those parts of the pizza to get hot. At the nodes, the wave is not shaking much at all, causing those parts of the pizza to stay cold."
Explanation:
antinodes vibrate and are the opposite of nodes which are stationary.
Some parts of the pizza are hot while others are still cold. Because the antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear.
What are the differences between nodes and antinodes?The fact that there are locations along the medium that appear to be standing still is a feature of every standing wave pattern.
The term "node" refers to these sites, which are also known as "points of no displacement." Other sites along the medium are subjected to vibrations with substantial positive and negative displacements.
During each vibrational cycle of the standing wave, these are the locations that experience the most displacement. These points are termed "antinodes" because they are the polar opposites of nodes.
The antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear. The wave isn't moving very much at the nodes, therefore those areas of the pizza stay cold."
Hence some parts of the pizza are hot while others are still cold.
To learn more about antinodes refer to the link;
https://brainly.com/question/2608876
A car is traveling at 75 m/s. 50 seconds later it is traveling at 25 m/s. What is the car’s acceleration?
Answer:
a = -1 m/s^2
Explanation:
Vi = 75 m/s
Vf = 25 m/s
t = 50 s
Plug those values into the following equation:
Vf = Vi + at
25 = 75 + 50a
---> a = -1 m/s^2