Answer:
Explanation:
G yvyvybybybububunununu
Some liquid is poured into a burette so that it reads 14cm³.50 drops were run each of volume 0.1cm³ What is the volume of the 50 drops. (4marks)
Answer:
V = 5 cm³
Explanation:
In this exercise the volume (Vo = 0.1 cm³) of each drop is indicated, requesting the volume of 50 drops
V = V₀ #_drops
V = 0.1 50
V = 5 cm³
Answer:
[tex]V_{50}=5cm^3[/tex]
Explanation:
From the question we are told that:
Volume of liquid in burette [tex]V_b=14cm^3[/tex]
Volume of drop of liquid [tex]V_d=0.1cm^3[/tex]
Number of drops [tex]n=50[/tex]
Generally the equation for volume of 50 drops V_{50} is mathematically given by
[tex]V_{50}=V_d*n[/tex]
[tex]V_{50}=0.1*50[/tex]
[tex]V_{50}=5cm^3[/tex]
Therefore the volume of the 50 drops
[tex]V_{50}=5cm^3[/tex]
Please select the word from the list that best fits the definition
Device that measures electric current
Answer:
ammeter
Explanation:
An ammeter is a measuring device used to measure the electric current in a circuit.
Read the text again
wait how does this work hehe this is kinda fun lol yay
RESPIRATION the exchange of gases between your body and your environment.
TRUE OR FALSE
true
Explanation:
because in physiology, respiration is the movement of oxygen from the outside environment to the cells within tissues, and the removal of carbon dioxide in the opposite direction.
1. What are the two main gases responsible for lowering down the pH.
2. Can we control an acid rain? Why or Why not?
3. When pH changes from 6 to 3, how many times does acidity increase?
Answer:
1. The three main acidic gases responsible for lowering the pH of rainwater are non-metal oxides produced by the burning of fossil fuels like coal, oil and natural gas. Sulfur dioxide is produced when fossil fuels containing sulfur impurities are burned.
2. A great way to reduce acid rain is to produce energy without using fossil fuels. Instead, people can use renewable energy sources, such as solar and wind power. Renewable energy sources help reduce acid rain because they produce much less pollution.
3. The pH scale is logarithmic, meaning that an increase or decrease of an integer value changes the concentration by a tenfold. For example, a pH of 3 is ten times more acidic than a pH of 4.
A student on an amusement park ride moves in circular path with a radius of 3.5 m once every 4.5 s. What is the tangential velocity of the student?
Answer:
the tangential velocity of the student is 4.89 m/s.
Explanation:
Given;
the radius of the circular path, r = 3.5 m
duration of the motion, t = 4.5 s
let the student's tangential velocity = v
The tangential velocity of the student is calculated as follows;
[tex]v = \frac{2\pi r}{t} \\\\v = \frac{2 \pi \times 3.5}{4.5} \\\\v = 4.89 \ m/s[/tex]
Therefore, the tangential velocity of the student is 4.89 m/s.
For a series circuit:
а. the value of resistance may be different for each resistor in the circuit.
b. the total resistance is the sum of the resistance in the circuit.
c. the total resistance increases as resistors are added to the circuit.
d. All of the above
Answer:
b
Explanation:
because the same current flows through the lamps and the total voltage across all the lamps is the sum of all the separate voltages across them.
The SI unit for pressure is the
Answer:
The SI unit of pressure is Pascal .
Linus builds an electrical circuit with a battery and with wires that carry the current. As the battery weakens, the current also weakens.
How does this affect the magnetic field around the wires?
The field gets stronger.
The field gets weaker.
The field changes direction.
The field disappears completely.
Answer:
The field gets weaker
Explanation:
I’m taking the test right now, hope this helps!!
Answer:
Linus builds an electrical circuit with a battery and with wires that carry the current. As the battery weakens, the current also weakens.
so, it would be B
Which of the following BEST describes what occurs in a fusion reaction?
A.
Two low mass nuclei are joined to form one nucleus.
B.
A single nucleus divides into two or more nuclei and gives off energy.
C.
Electrons are shared between the nuclei.
D.
A chemical reaction occurs between the nuclei.
Answer:
Two mass nuclei are joined to form one nucleus
Explanation:
As the name implies "fusion", it is the joining of lighter nucleus to form a heavier nucleus to produce energy
A worker leaves home at 9:00 AM, travels 40 km to the office, and then returns home at 5:00 PM. What is the magnitude of the worker's displacement during this 8-hour span of time?
Answer:
The answer is 0km
Explanation:
If a book has a weight of 23.3 N on earth, what is its mass
Answer:
2.38 kg
Explanation:
by definition, weight in physics is the force of gravity (Fg)
Fg = mass x gravity or mg
gravity is 9.8 m/s^2
N = kg m/s^2
Fg = mg
23.3 kg m/s^2 = 9.8 m/s^2 x m
23.3 kg m/s^2 / 9.8 m/s^2 = m >>> m/s^2 cancel out
23.3/9.8 = 2.37755 kg
m = 2.38 kg
Below is a single strand of DNA, what is the complementary base pair for the strand?
AAG, GCA, TCA, GAT
What is the efficiency of a car's engine when heat input is 400,000 joules and
the waste heat is 300,000 joules?
O A. 25%
B. 35%
O C. 75%
D. 85%
Answer: A. 25%
Explanation: Ap3x
Can you help me please? I'll mark brainiest
Answer:
picture isn't rlly clear :/
Answer:
Don't know this but I will do research
Can sugar molecules produced from photosynthesis be rearranged into different compounds carry out life process
Answer:
Yes, the sugar molecules produced from photosynthesis can be rearranged into different compounds to carry out life processes such energy producing compounds, energy storage compounds, body building compounds, and compounds of other types of food
Explanation:
a) The sugar can be broken down in a plant cell to produce ATP and then energy through cellular respiration as follows;
C₆H₁₂O₆ + O₂ 6CO₂ + 6H₂O + ATP
The produced energy can be used as power for cellular activities, such as the synthesis of protein and cell division
b) The produced sugar can be linked together by enzymes to form starch which is a form of chemical storage of energy as follows;
Sugar C₆H₁₂O₆ transformed into starch (C₆H₁₀O₅)ₙ
c) The sugar can be used in building the plant body by forming cellulose which is a form of starch
d) The sugar can be transformed into proteins and fat which are other types of food such as compounds containing sugar produces compounds containing fat based compounds
When we sit on a chair and study for 2-3 hours, we are not doing work from a physicists point of view. Why?
In the context of physics, work is defined to be the movement of an object when you apply a (pushing or pulling) force.
If you lifted a box to move it upward, then you are doing work. If you slide that box along the floor, then you are also doing work. However, if you try to lift something very heavy, but cannot move it at all, then 0 work is being applied. This is because the object hasn't moved. You need displacement to have work happen.
So that's why a physicist would not consider studying doing "work" (in the context of physics), though I'm sure they would be able to agree that studying does exercise the mind.
A radioactive decay is illustrated. Which radioactive emission is a product of this decay?
A)Alpha
B)beta
C)gamma
D)positron
The radioactive decay is shown in the image attached to this answer
Answer:
Alpha
Explanation:
An alpha decay is said to have occurred when the mass number of the daughter nucleus decreases by four units and the atomic number of the daughter nucleus decreases by two units.
If we look at the equation from left to right, we will notice that the mass number of the daughter nucleus decreased by four units and the atomic of the daughter nucleus number by two units compared to that of the parent nucleus leading to the emission of an alpha particle.
Does a battery produce electric currents?
Answer:
A battery is a device that stores chemical energy and converts it to electrical energy. The chemical reactions in a battery involve the flow of electrons from one material (electrode) to another, through an external circuit. The flow of electrons provides an electric current that can be used to do work.
Which two types of electromagnetic waves have higher frequencies than the waves that make up ultraviolet light?
o radio waves and infrared light
O visible light and X-rays
O microwaves and gamma rays
gamma rays and X-rays
Answer:
Gamma rays and x rays
Explanation: just took the test
Gamma rays and X-rays have higher frequencies than the waves that make up ultraviolet light. Hence option D is correct.
What is Electromagnetic Spectrum ?Electromagnetic spectrum is nothing but the range of wavelengths or frequencies on which electromagnetic radiation extend. it is whole distribution of electromagnetic waves according to frequency or wavelength. Electromagnetic wave is nothing but a photon which carries energy. Photon wave has frequency, wavelength as well as amplitude.
Electromagnetic spectrum is show in figure.
There is inverse relation between wavelength and frequency as υ = c/λ
where υ is the frequency, λ is the wavelength and c is the speed of light.
as wavelength increases, frequency decreases vice verse.
In this figure we can see that radio waves has highest wavelength hence it has lowest frequency. X ray and gamma rays has lowest wavelength hence it has highest frequency.
Hence option D is correct.
To know more about electromagnetic waves, click :
https://brainly.com/question/18165320
#SPJ7.
A magnetic material would always be what to a magnet
Answer:
attractive/magnetic
mark me brainliestt :))
b) Find the value of xº from the following figure.
i.
ii.
yo
500 x
хо
2x0
Answer:
the value of the question is 1 because of the indicies rule.
Answer:
1
Explanation:
because
Question 1 (1 point)
All solid objects will deform when enough force is applied.
O True
False
Answer:
Solid objects will deform when adequate loads are applied to them; if the material is elastic, the object will return to its initial shape and size after removal. This is in contrast to plasticity, in which the object fails to do so and instead remains in its deformed state.
Explanation:
Answer:
It is false
Explanation:
because when it like a rolling ball it can deform no matter what unlesss you throw it at the ground really hard then it breaks but a soft or sometimes metal yeah it can deform but not all things solid deform.
Un cuerpo se mueve por una carretera que tiene rozamiento.¿Podríamos aplicar el principio de conservación de la energía mecánica? ¿Qué requisitos se han de cumplir para poder aplicarla?
Answer:
Sí se puede aplicar el Principio de Conservación de la Energía Mécanica siempre y cuando se considere los efectos de pérdida de energía a causa del rozamiento, de lo contrario, no se cumpliría el requisito de conservación derivado del citado principio de conservación.
Explanation:
Consideremos que el cuerpo representa nuestro sistema de estudio, el cual se desplaza por una carretera y experimenta rozamiento, significando cambios en la energía cinética y potencial gravitacional. La presencia de rozamiento indica una disipación de la energía del cuerpo, cuya energía mecánica total disminuye, significando un sistema no conservativo.
Sí se puede aplicar el Principio de Conservación de la Energía Mécanica siempre y cuando se considere los efectos de pérdida de energía a causa del rozamiento, de lo contrario, no se cumpliría el requisito de conservación derivado del citado principio de conservación.
Para fabricar la bicicleta de un niño pequeño se tiene en cuenta que la fuerza que puede desarrollar es menor que la de un adulto y que no sabe cambiar de desarrollo. Por ello, se fabrica con un solo plato y un solo piñón de desarrollo muy pequeño. El plato es de 28 dientes y el radio de la rueda mide 20 cm. Si queremos que el desarrollo sea de 1,4 calcula: - El número de dientes que debe tener el piñón de la bicicleta. - Cuántos metros avanza la bicicleta por cada pedalada completa.
Answer:
a) El piñón debe tener 20 dientes.
b) La bicicleta avanza aproximadamente 1,759 metros por cada pedaleada completa.
Explanation:
a) El plato es el engranaje más grande que forma parte del sistema de transmisión, acompañando a la cadena y el piñón integrado a la rueda trasera. Asumiendo que no existen pérdidas por fricción seca y que las condiciones de lubricación del sistema de transmisión son óptimas tal que las pérdidas de potencia son despreciables. Además, supongamos que la bicicleta viaja a velocidad constante, entonces tenemos la siguiente identidad mediante las definiciones de trabajo y potencia:
[tex]T_{P}\cdot \omega_{P} = T_{p}\cdot \omega_{p}[/tex] (1)
Donde:
[tex]T_{P}[/tex] - Torque del plato, en newton-metros.
[tex]T_{p}[/tex] - Torque del piñón, en newton-metros.
[tex]\omega_{p}[/tex] - Rapidez angular del piñón, en radianes por segundo.
[tex]\omega_{P}[/tex] - Rapidez angular del plato, en radianes por segundo.
Sabiendo el hecho que tanto el plato y el piñón experimenta la misma velocidad tangencial, podemos simplificar (1) como sigue:
[tex]\frac{T_{P}}{R_{P}} = \frac{T_{p}}{R_{p}}[/tex] (1b)
Puesto que el radio de cada elemento y el número de dientes son, por separado, directamente proporcionales al número de dientes, modificamos (1b) así y tenemos la siguiente identidad, la cual equivale a su vez a la razón de desarrollo:
[tex]\frac{T_{P}}{T_{p}} = \frac{N_{P}}{N_{p}} = \frac{R_{P}}{R_{p}} = \frac{\omega_{p}}{\omega_{P}}[/tex] (1c)
Donde:
[tex]N_{p}[/tex] - Número de dientes del piñón, sin unidad.
[tex]N_{P}[/tex] - Número de dientes del plato, sin unidad.
Si tenemos que [tex]r = 1,4[/tex] y [tex]N_{P} = 28[/tex], entonces tenemos que el número de dientes del piñón es:
[tex]r = \frac{N_{P}}{N_{p}}[/tex]
[tex]N_{p} = \frac{N_{P}}{r}[/tex]
[tex]N_{p} = \frac{28}{1,4}[/tex]
[tex]N_{p} = 20[/tex]
El piñón debe tener 20 dientes.
b) De acuerdo con la relación de desarrollo, por cada revolución realizada por el plato, el piñón realiza 1,4 revoluciones. Entonces, el avance realizado por la rueda trasera ([tex]s[/tex]), en metros, es igual al productor de la relación de desarrollo y la circunferencia de la rueda, es decir:
[tex]s = r\cdot 2\pi\cdot R[/tex] (1)
Donde [tex]R[/tex] es el radio de la rueda trasera, en metros.
Si conocemos que [tex]r = 1,4[/tex] y [tex]R = 0,2\,m[/tex], entonces el avance realizado por la rueda trasera es:
[tex]s = r\cdot 2\pi\cdot R[/tex]
[tex]s = (1,4)\cdot (2\pi)\cdot (0,2\,m)[/tex]
[tex]s \approx 1,759 \,m[/tex]
La bicicleta avanza aproximadamente 1,759 metros por cada pedaleada completa.
A block attached to an ideal spring oscillates horizontally with a frequency of 2.0 Hz and amplitude of
0.25 m. The spring constant is 75
What is the mass of the block?
Answer: 0.47 kg
Explanation:
Dos masas con valores de 8kg y 12kg cada una se encuentran separadas por una distancia de 1m. Determinar la fuerza de atraccion gravitacional entre ellas si se compara con el valor de sus pesos Como es este valor?
The question is: Two masses with values of 8kg and 12kg each are separated by a distance of 1m. Determine the force of gravitational attraction between them if compared with the value of their weights. What is this value?
Answer: The force of gravitational attraction between them if compared with the value of their weights is [tex]640.704 \times 10^{-11} N[/tex].
Explanation:
Given: [tex]m_{1}[/tex] = 8 kg, [tex]m_{2}[/tex] = 12 kg
Distance = 1 m
Formula used is as follows.
[tex]F = \frac{G \times m_{1} \times m_{2}}{r^{2}}[/tex]
where,
F = force of gravitational attraction
G = gravitational constant = [tex]6.674 \times 10^{-11} N m^{2}/kg^{2}[/tex]
[tex]m_{1}[/tex] = mass of object 1
[tex]m_{2}[/tex] = mass of object 2
r = distance between the centers of these two objects
Substitute the values into above formula as follows.
[tex]F = \frac{G \times m_{1} \times m_{2}}{r^{2}}\\= \frac{6.674 \times 10^{-11} Nm^{2}/kg^{2} \times 8 kg \times 12 kg}{(1 m)^{2}}\\= 640.704 \times 10^{-11} N[/tex]
Thus, we can conclude that the force of gravitational attraction between them if compared with the value of their weights is [tex]640.704 \times 10^{-11} N[/tex].
What is needed in order to create a magnetic field
Electric currents, changes in electric fields, or charged particles with inherent angular momentum produce the magnetic field.
How do magnetic fields work?A magnetic field, a vector field that describes the magnetic field on moving electric charges, electric currents, and magnetic materials. A moving charge in a magnetic field is subject to a force that is perpendicular to the magnetic field and has its own velocity.
The force that draws objects like iron is known as the magnetic force. The attraction or repellence between two magnetic materials is known as magnetic force. Iron is one of the ferromagnetic materials.
Given the facts, the magnetic field is typically present whenever charged particles with intrinsic angular momentum or spin are in the field or space, as well as whenever there are changes in the electric fields or currents.
Now, two of Maxwell's equations explain the magnetic fields produced by electric currents and shifting electric fields.
Magnetic fields are produced whenever a charge moves. When more charge is transferred about, a magnetic field grows stronger.
Hence, when there is an electric field, there is also a magnetic field.
Go here for additional information about magnetic fields.
https://brainly.com/question/3160109
#SPJ6
True or False?
________________The fact that ocean crust is younger the farther away it is from an ocean ridge supports the theory of plate tectonics
Answer:
true is the answer of the question