Harlow Shapley's discovery related to globular clusters and their distribution in space. Harlow Shapley found that globular clusters were roughly distributed throughout a spherical volume of space, and realized that this distribution could be used to determine the location of the Milky Way's center. By observing the positions and distances of these clusters, Shapley was able to estimate the position of our galaxy's center, which he determined to be located at a considerable distance from our Solar System. This finding helped to reshape our understanding of the Milky Way and our place within it.
Distribution of globular clusters in space: Shapley studied the distribution of globular clusters in space, which are collections of hundreds of thousands of stars that orbit the center of the Milky Way. By mapping the distribution of these clusters, Shapley was able to determine that the center of the Milky Way was not located where previously thought.
Mapping the Milky Way's spiral arms: Shapley was able to map the Milky Way's spiral arms using the distribution of young, bright stars. This helped him to determine that the Milky Way was much larger than previously thought.
To know more about Harlow Shapley's:
https://brainly.com/question/28256738
#SPJ11
does your data show a relationship between the tension in an the linear density of the elastic string? if so, what is that relationship
Yes, the data shows a relationship between the tension and the linear density of the elastic string. This relationship is described by the equation for the wave speed (v) on a string:
v = √(T/μ)
where v is the wave speed, T is the tension in the string, and μ is the linear density (mass per unit length) of the string. This equation shows that the wave speed in an elastic string is directly proportional to the square root of the tension and inversely proportional to the square root of the linear density. In other words, if the tension in the string is increased while the linear density is kept constant, the wave speed will increase. Conversely, if the linear density of the string is increased while the tension is kept constant, the wave speed will decrease. So, in general, there is a relationship between the tension in an elastic string and its linear density, which affects the wave speed of the string.
Learn more about wave speed here:
https://brainly.com/question/31493836
#SPJ11
Which capacitor has the largest potential difference between its plates?A) AB) BC) CD) DE) A and D are the same and larger than B or C.
The capacitor that has the largest potential difference between its plates is D.
Equation V = Q/C, where V is the potential difference, Q is the charge held on the capacitor, and C is the capacitance, gives the potential difference between the plates of a capacitor.
The four capacitors in the diagram all have the same charge because they are all linked in series. The capacitor with the highest capacitance will therefore have the smallest potential difference, and vice versa.
The capacitor with the smallest capacitance, and consequently the one with the greatest potential difference between its plates, according to the values shown in the diagram, is capacitor D. Therefore, (D) is the correct response.
For such more question on capacitor:
https://brainly.com/question/13578522
#SPJ11
in order to determine whether this horizontal position of the pumpkin trajectory represents a minimum or maximum, evaluate d2ydx2 at xm .
Depending on the direction the pumpkin was thrown, it can be determined if the horizontal position of the pumpkin trajectory reflects a minimum or maximum.
What is trajectory?A moving object's trajectory is the path it follows through space as a function of time. In mathematics, a trajectory is defined as an object's position over a specific period of time.
To determine whether the horizontal position of the pumpkin trajectory represents a minimum or maximum, we need to evaluate the second derivative of the vertical position with respect to horizontal position at that point. In other words, we need to find d²y/dx² at x = xm.
Assuming that the pumpkin follows a parabolic trajectory given by the equation y = a + bx + cx², where y is the vertical position and x is the horizontal position, we can find the second derivative as follows:
dy/dx = b + 2cx
d²y/dx² = 2c
Since the pumpkin reaches its maximum height at x = xm, the first derivative dy/dx is equal to zero at that point. Therefore, we have:
dy/dx = b + 2cx = 0
2cx = -b
c = -b/(2x)
Substituting this expression for c into the equation for the second derivative, we have:
d²y/dx² = 2c = -b/x
To determine the sign of this expression at x = xm, we need to know whether the coefficient b is positive or negative. If the pumpkin was launched upwards, then b is positive and the second derivative at xm will be negative, indicating that the trajectory has a maximum at that point. On the other hand, if the pumpkin was launched downwards, then b is negative and the second derivative at xm will be positive, indicating that the trajectory has a minimum at that point.
Therefore, the determination of whether the horizontal position of the pumpkin trajectory represents a minimum or maximum depends on the direction in which the pumpkin was launched.
Learn more about trajectory on:
https://brainly.com/question/15282670
#SPJ11
If the Biot number is increased by increasing h while keeping everything else the same, less heat will be exchanged between the block and the fluid bathing the right face.A) TrueB) FalseAn increase in h would imply greater convection at the boundary which would correspond to more heat being exchanged at the boundary. This increase in h could come from an increase in the flow rate of the fluid that is bathing the right face.
If the Biot number is increased by increasing h while keeping everything else the same, less heat will be exchanged between the block and the fluid bathing the right face.
B) False because, An increase in the Biot number (Bi) is achieved by increasing the convective heat transfer coefficient (h) while keeping other parameters the same.
The Biot number is defined as:
Bi = hL/k
where L is the characteristic length of the object, and k is the thermal conductivity of the material.
As you mentioned, an increase in h would imply greater convection at the boundary, leading to more heat being exchanged at the boundary.
This increase in h could indeed come from an increase in the flow rate of the fluid that is bathing the right face. Therefore, the statement "less heat will be exchanged between the block and the fluid bathing the right face" is false.
For similar question on Biot number.
https://brainly.com/question/15219947
#SPJ11
Fill in the blanks: When a ball bounces against a wall there will be large change in velocity in short period of time. This means the ____ is large, hence the net ___ must be proportionately large as well.
When a ball bounces against a wall, there will be a large change in velocity in a short period of time. This means the impulse is large, hence the net force must be proportionately large as well.
Explanation: Impulse is defined as the change in momentum of an object, which is equal to the product of the net force acting on the object and the time interval over which the force acts.
In the case of a ball bouncing against a wall, the large change in velocity in a short period of time results in a large impulse.
Since impulse is directly proportional to the net force, a large impulse indicates that a proportionately large net force must be acting on the ball during the collision. This large net force is responsible for the drastic change in the ball's velocity as it bounces off the wall.
To know more about change in momentum click on below link:
https://brainly.com/question/6270239#
#SPJ11
< Chapter 15 Prelecture Assignment Good Vibes: Introduction to Oscillations 3 of 9 Now assume for the remaining Parts G-J, that the x coordinate of point R is 0.12 m and the t coordinate of point K is 0.0050 s.
PartG What is the period T?
Express your answer in seconds View Available Hint(s)
Hint 1. How to approach the problem
In moving from the point t = 0 to the point K what fraction of a full wavelength is covered? Call that fraction a Then you can set aT = 0.005 s Dividing by the fraction a will give the period T
t= Submit Request Answer Part H How much time t does the block take to travel from the point of maximum displacement to the opposite point of maximum displacemen?
The period T is 0.0100 seconds and the block takes 0.0050 seconds to travel from the point of maximum displacement to the opposite point of maximum displacement.
Part G: To find the period T, we need to first determine the fraction of a full wavelength that is covered when moving from point t = 0 to point K. Since the x-coordinate of point R is 0.12 m and the t-coordinate of point K is 0.0050 s, we can assume that point K is located at half a wavelength.
Step 1: Determine the fraction of a full wavelength (a)
Since point K is at half a wavelength, the fraction a is 1/2.
Step 2: Calculate the period T
We know that aT = 0.0050 s, and a = 1/2.
(1/2) * T = 0.0050 s
Now, divide by the fraction a (1/2) to find the period T.
T = 0.0050 s / (1/2)
T = 0.0100 s
Part H: To find the time t it takes for the block to travel from the point of maximum displacement to the opposite point of maximum displacement, we can use the period T calculated in Part G.
Since the block travels from one point of maximum displacement to the opposite point of maximum displacement in half a period:
Step 1: Calculate the time t
t = (1/2) * T
t = (1/2) * 0.0100 s
t = 0.0050 s
To learn more about wavelength click here https://brainly.com/question/13533093
#SPJ11
two identical guitar strings are prepared such that they have the same length ( 0.62 m ) and are under the same amount of tension. the first string is plucked at one location, primarily exciting the third harmonic. the other string is plucked in a different location, primarily exciting the fifth harmonic. the resulting sounds give rise to a beat frequency of 378 hz . what is the wave propagation speed on the guitar strings?
The beat frequency of 378 Hz tells us that the frequency difference between the two plucked locations is 378 Hz. Since one location primarily excites the third harmonic and the other primarily excites the fifth harmonic, we can set up the following equations:
f3 = 3v/2L and f5 = 5v/2L
Where f3 and f5 are the frequencies of the third and fifth harmonics respectively, v is the wave propagation speed on the strings, and L is the length of the strings.
We can rearrange these equations to solve for v:
v = (2L/3)f3 = (2L/5)f5
Plugging in the values for L and the frequencies corresponding to the third and fifth harmonics, we get:
v = (2 x 0.62 m/3) x 378 Hz/3 = 111.8 m/s
v = (2 x 0.62 m/5) x 378 Hz/5 = 144.5 m/s
Since both strings have the same tension, their wave propagation speeds should be the same. Therefore, we can take the average of these two values to get the final answer:
v = (111.8 m/s + 144.5 m/s)/2 = 128.2 m/s
So the wave propagation speed on the guitar strings is 128.2 m/s.
To know more about beat frequency , visit
https://brainly.com/question/14705053
#SPJ11
If refractive index of small angled prism of 4° is 1.5 then what is the deviation of prism.
ans. = 2
we know that,
the formula for small angle deviation is
deviation = ( refractive index - 1)angle of the prism
putting values we get
= ( 1.5 -1 ) 4
= 0.5 x 4
= 2
Hence, the deviation of prism is 2
the chart below lists the forces applied to each of four toy cars. if all the cars accelerate at the same rate, which car must have the largest mass? a. p b. q c. r d. s
To determine which car has the largest mass, we need to use the formula F=ma, where F is the force applied, m is the mass of the object, and a is the acceleration. Since all the cars are accelerating at the same rate, we can compare the forces applied to each car to determine which one has the largest mass.
Looking at the chart, we see that car S has the largest force applied to it, which means it must have the largest mass. Therefore, the answer is d. s.If an object is moving at a constant speed in a constant rightward direction, then the acceleration is zero and the net force must be zero.
to know more about forces applied click this link -
brainly.com/question/21895033
#SPJ11
What length of wire will experience 12N force within a magnetic field of 2.5uT while carrying 7.35 A of current?
Please show all work, thank you.
The length of the wire that is required is 653 km
What is the force on a current carrying conductor?The direction of the magnetic force on the conductor is perpendicular both to the direction of the magnetic field and to the direction of the current flow in the conductor.
The formula for the magnetic force on a current carrying conductor is given by:
F = BIL sin(θ)
We know that the force that is acting on a current carrying conductor can be given as;
F = BIL
L = F/BI
L = 12N/2.5 * 10^-6 * 7.35
L = 653 km
Learn more about force:https://brainly.com/question/30815693
#SPJ1
star a and star b have same temperatures, but star a is more luminous than star b. based on this information, which of the following must be the case?A. Star A is smaller than Star B
B. Star A is larger than Star B
C. Star A and Star B have same size
D. Star A is more massive than star B
The correct answer is D. StarA is more massive than starB.
Star A being more luminous than Star B while having the same temperature suggests that Star A must be more
massive than Star B. This is because a star's luminosity is directly proportional to its mass, and therefore, the more
massive the star, the more luminous it will be. The size of the star is not necessarily related to its temperature or
luminosity, so we cannot determine whether Star A is larger, smaller, or of the same size as Star B based on the given information.
learn more about luminous: https://brainly.com/question/31650272
#SPJ11
help please................................................................
The missing energy at box B is K.E = 590 J.
The missing energy at box C is P.E = 316 J
The missing energy at box D is K.E = 1,350 J
What is the missing values of the kinetic energy and potential energy?The missing values of the energy is calculated based on the law of conservation of energy as follows;
total energy, E = 1,350 J
For Box B;
K.E = E - P.E
K.E = 1,350 J - 760 J
K.E = 590 J
For box C;
P.E = E - K.E
P.E = 1350 J - 1034 J
P.E = 316 J
For box D
K.E = E - P.E
K.E = 1350 J - 0 J
K.E = 1350 J
Learn more about conservation of energy here: https://brainly.com/question/166559
#SPJ1
The drill used by most dentists today is powered by a small air-turbine that can operate at angular speeds of 350000 rpmrpm. These drills, along with ultrasonic dental drills, are the fastest turbines in the world-far exceeding the angular speeds of jet engines. Suppose a drill starts at rest and comes up to operating speed in 2.0 ss . You may want to review (Pages 305 - 307) .a)Find the angular acceleration produced by the drill, assuming it to be constant.Express your answer using two significant figures.b)How many revolutions does the drill bit make as it comes up to speed?Express your answer using two significant figures
a) The angular acceleration produced by the drill is 1.8x10^5 rad/s^2, assuming it to be constant.
b) The drill bit makes approximately 6.0 revolutions as it comes up to speed.
a) We can use the equation for angular acceleration, α, which is given by α = Δω/Δt, where Δω is the change in angular velocity and Δt is the time taken for the change. Here, Δω = 350000 rpm - 0 rpm = 350000 rpm, and Δt = 2.0 s. Converting rpm to rad/s, we get Δω = 2π(350000/60) rad/s = 3669.4 rad/s. Therefore, α = 3669.4 rad/s / 2 s = 1.8x10^5 rad/s^2.
b) The number of revolutions made by the drill bit can be found using the equation θ = ω_i t + 0.5 α t^2, where θ is the angle turned, ω_i is the initial angular velocity (0 rpm), t is the time taken (2.0 s), and α is the angular acceleration (1.8x10^5 rad/s^2).
Substituting the values, we get θ = 0 + 0.5 x 1.8x10^5 rad/s^2 x (2.0 s)^2 = 360000 rad. Converting to revolutions, we get θ = (360000 rad)/(2π rad/rev) = 57296.9 rev. However, since we are asked for the answer in two significant figures, we round off to 6.0 revolutions.
For more questions like Acceleration click the link below:
https://brainly.com/question/12550364
#SPJ11
current estimates place the value of hubble's constant ( h0 ) near 22 km/s/mly, giving 14 billion years as the age of the universe. if h0 were in fact 44 km/s/mly, the approximate age of the universe would be current estimates place the value of hubble's constant () near 22 km/s/mly, giving 14 billion years as the age of the universe. if were in fact 44 km/s/mly, the approximate age of the universe would be
If Hubble's constant (H0) were in fact 44 km/s/mly, the approximate age of the universe would be half of the current estimate, which is 7 billion years.
The solution to this scenario would require a re-evaluation and adjustment of current cosmological models and theories, as the age of the universe plays a significant role in understanding its origins and evolution. However, it is important to note that current observations and measurements support the current estimate of H0 and age of the universe.
Solution:
1. Hubble's constant (H0) is used to calculate the age of the universe.
2. The given value of H0 is 22 km/s/Mly, which results in an age of 14 billion years.
3. To find the age of the universe with H0 at 44 km/s/Mly, we can set up a proportion:
(22 km/s/Mly) / 14 billion years = (44 km/s/Mly) / X
4. Cross-multiply and solve for X:
22 * X = 44 * 14
X = (44 * 14) / 22
X = 28
5. The age of the universe with H0 at 44 km/s/Mly is approximately 7 billion years.
To know more about Hubble's constant, visit:
brainly.com/question/30004197
#SPJ11
What is the angular acceleration of a ball that starts at rest and increases its angular velocity uniformly to 5 rad/s
Answer:
no se English plis
Explanatique
que si aumente la rad/s en el angular. de su velocity
Jupiters orbital period is approximately 12 years. if it were exactly 12 years. Which periods would not produce an effective resonance with jupiter?
If Jupiter's orbital period were exactly 12 years, then the periods that would not produce an effective resonance with Jupiter would be those that are not simple ratios of Jupiter's period.
A resonance occurs when the orbital period of one planet is a simple ratio of the orbital period of another planet. For example, if the orbital period of one planet is twice that of another planet, they are in a 2:1 resonance.
So, if Jupiter's period were exactly 12 years, the periods that would not produce an effective resonance with Jupiter would be those that are not simple ratios of 12. Here are some examples:
A planet with a period of 3 years (4:1 ratio) would be in resonance with Jupiter.
A planet with a period of 4 years (3:1 ratio) would be in resonance with Jupiter.
A planet with a period of 6 years (2:1 ratio) would be in resonance with Jupiter.
A planet with a period of 8 years (3:2 ratio) would be in resonance with Jupiter.
On the other hand, planets with periods of 5, 7, 9, 10, or 11 years would not be in resonance with Jupiter because their periods are not simple ratios of 12.
learn more about resonance here:
https://brainly.com/question/31039280
#SPJ11
normally, 100% of the star's light reaches us. estimate how much light reached us during the transit. be sure to report to 4 decimal places. therefore, how much light was blocked by the planet?
Based on the mentioned informations and provided values, about 99.75% of the star's light reached us during the transit, and the remaining 0.25% was blocked by the planet.
To estimate how much light was blocked by the planet during the transit, we need to know the percentage of the star's surface area that is covered by the planet.
Assuming that the planet is a perfect circle and that it passes directly in front of the star, the percentage of the star's surface area that is covered by the planet can be calculated using the formula:
% coverage = (π x (radius of planet/star)²) / (4 x π x (radius of star)²) x 100%
where π is the mathematical constant pi, and the radius of the planet/star is measured in the same units.
Let's say that the radius of the planet is 0.1 times the radius of the star. In that case, the percentage coverage can be calculated as:
% coverage = (π x (0.1)²) / (4 x π x (1)²) x 100% = 0.25%
This means that during the transit, 0.25% of the star's surface area was covered by the planet, and therefore, the amount of light that reached us was:
100% - 0.25% = 99.75%
So, about 99.75% of the star's light reached us during the transit, and the remaining 0.25% was blocked by the planet.
Learn more about surface area :
https://brainly.com/question/26883871
#SPJ4
constant patterns of particle behavior are called what
Constant patterns of particle behavior are called "laws of nature" or "physical laws."
These terms refer to the regular, predictable behavior of particles under certain conditions, which can be described mathematically or through scientific principles.
Examples of physical laws include Newton's laws of motion, the laws of thermodynamics, and the laws of conservation of energy and mass.
The constant patterns of particle behavior are often referred to as laws or principles.
In the context of physics, these laws describe the fundamental rules that govern the behavior of particles and systems, such as the laws of motion, the laws of thermodynamics, and the laws of electromagnetism.
These laws have been formulated through observation, experimentation, and theoretical modeling, and they provide a framework for understanding the natural world.
For similar question on particle.
https://brainly.com/question/30685477
#SPJ11
two blocks with the same mass are connected by a string and are pulled across a frictionless surface by a constant force, f, exerted by a string (see diagram).note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part.two objects, joined by a string, are pulled to the right along a horizontal surface by a force f.which of the following statements is correct about what will happen to the boxes?
The boxes will move together with the same acceleration since they have the same mass and are being pulled by the same force on a frictionless surface.
When two blocks with the same mass are connected by a string and pulled across a frictionless surface by a constant force, F, the following statement is correct about what will happen to the boxes: Both blocks will accelerate at the same rate, since they have the same mass and are experiencing the same net force (F) acting on the entire system. The tension in the string connecting the blocks will also be constant throughout the motion. The acceleration of the two boxes will be proportional to the force applied, divided by the mass of the boxes. Since the boxes have the same mass, they will experience the same acceleration, which means they will move at the same speed.
To learn more about acceleration click here https://brainly.com/question/30660316
#SPJ11
A position vector in the first quadrant has an x component of 3 m and a magnitude of 13 m. What is the value of its y component?
To find the value of the y-component of a position vector in the first quadrant with an x-component of 3 m and a magnitude of 13 m, we can use the Pythagorean theorem.
The position vector has components (x, y) and a magnitude (||v||) which is the length of the vector. In this case, x = 3 m and ||v|| = 13 m.
The Pythagorean theorem states that for a right-angled triangle, the square of the length of the hypotenuse (the side opposite the right angle) is equal to the sum of the squares of the lengths of the other two sides. In this case, the hypotenuse is the magnitude of the position vector, and the two sides are the x and y components. Therefore:
||v||² = x² + y²
Substitute the given values:
(13 m)² = (3 m)² + y²
169 m² = 9 m² + y²
Now, solve for y² :
y² = 169 m² - 9 m² = 160 m²
Take the square root of both sides to find y:
y = sqrt(160 m² ) = 4√10 m ≈ 12.65 m
So, the value of the y-component of the position vector is approximately 12.65 m.
To know more about vector visit :-
https://brainly.com/question/25705666
#SPJ11
1. down at the ice skating (assume frictionless ice) rink you watch a customer try out the new exercise machine consisting of a large spring allowing the skater to oscillate back and forth. the skater (mass
At the frictionless ice skating rink, a customer tries out a new exercise machine consisting of a large spring, which allows the skater to oscillate back and forth, the skater's mass is a key factor in determining the oscillation behavior of the spring-skater system.
Down at the ice skating rink, we observe a customer trying out a new exercise machine that consists of a large spring. The spring allows the skater to oscillate back and forth. Assuming frictionless ice, the skater's mass does not have an effect on the motion of the spring. The period of oscillation, which is the time it takes for one complete back-and-forth motion, depends solely on the spring constant and the mass of the skater. Specifically, the period is given by the formula T=2π√(m/k), where T is the period in seconds, m is the mass of the skater in kilograms, and k is the spring constant in newtons per meter.
Thus, a heavier skater will have a longer period than a lighter skater, assuming the spring constant remains the same. Additionally, the amplitude of the oscillation, which is the maximum displacement from the equilibrium position, may also depend on the skater's strength and technique in using the machine.
Learn more about spring oscillates back and forth: https://brainly.com/question/15969276
#SPJ11
Is a ball falling with constant velocity in translational equilibrium?
Answer: Yes, because the force of air resistance must be equal to the force of gravity, since the ball is not accelerating (constant velocity). Since the net forces acting on the object is zero, the object is in translational equilibrium.
No, a ball falling with constant velocity is not in translational equilibrium.
Translational equilibrium means that the net force acting on an object is zero, and this is not the case for a ball falling with constant velocity. Gravity is still acting on the ball, so there is a force pulling it downwards. However, the ball is moving at a constant velocity because the force of gravity is balanced by the force of air resistance. So, while the ball is not in translational equilibrium, it is in a state of dynamic equilibrium where the forces acting on it are balanced, resulting in a constant velocity.
To learn more about translational equilibrium , refer:-
https://brainly.com/question/31142588
#SPJ11
Fill in the blank. The facet of adolescent egocentrism called the _____ refers to teenagers' belief that everyone is watching everything they do.
The facet of adolescent egocentrism called the imaginary audience refers to teenagers' belief that everyone is watching everything they do.
Egocentrism refers to the idea that a particular observer's perspective or frame of reference is the only one that matters in determining physical phenomena. This can lead to errors in understanding and describing physical events, as different observers may have different perspectives that affect their observations.
For example, in special relativity, different observers moving at different velocities will measure different values for the same physical quantities, such as time and distance. A person who is egocentric in their thinking may believe that their measurements are the only ones that matter and may not take into account the perspectives of other observers. Egocentrism can also be a hindrance to collaboration and communication among physicists, as individuals may be more focused on their own observations and interpretations rather than working together to develop a shared understanding of a particular phenomenon.
To learn more about Egocentrism visit here:
brainly.com/question/29850097
#SPJ4
A solenoid is comprised of 1,000 turns of wire and has a net current of 0.5 A running through it. Inside the solenoid is a magnetic field of 250 times mu naught. How long is the solenoid?A. 1.26 m B. 0.33 m C. 2.52 m D. 2.00 m E. 1.05 m
The length of the solenoid is 2 m, which corresponds to option D.
To find the length of the solenoid, we need to use the formula for the magnetic field inside a solenoid:
B = μ₀ * n * I
where B is the magnetic field, μ₀ is the permeability of free space, n is the number of turns per unit length, and I is the current.
We are given:
B = 250 * μ₀
Total turns (N) = 1,000
Current (I) = 0.5 A
First, we need to find the number of turns per unit length (n). We can do this by dividing the total number of turns (N) by the length (L) of the solenoid:
n = N / L
Now, we can rearrange the formula for the magnetic field to find the length (L) of the solenoid:
L = N / (B / (μ₀ * I))
Substitute the given values:
L = 1,000 / (250 * μ₀ / (μ₀ * 0.5 A))
Notice that μ₀ will cancel out:
L = 1,000 / (250 / 0.5)
Now, solve for L:
L = 1,000 / 500 = 2 m.
For similar question on solenoid.
https://brainly.com/question/25484149
#SPJ11
Annie has a soccer ball and a kickball. She kicks each
ball with the same force. The soccer ball accelerates at 3
m/s2, and the kickball accelerates at 5 m/s².
Use Newton's laws to describe why the kickball has a
greater acceleration.
The kickball has less mass, while the soccer ball has greater mass.
What is Newton's second law of motion?Newton's second law of motion states that, the force applied to an object is directly proportional to the product of mass and acceleration of the object.
Mathematically, Newton's second law is given as;
F = ma
where;
m is the mass of the objecta is the acceleration of the objectFor a constant mass of an object, an increase in force causes increase in acceleration of the object. So increase in acceleration of an object implies increase in the applied force of the object.
Learn more about Newton's second law here: https://brainly.com/question/25545050
#SPJ1
A ball of mass 400g originally at rest gains kinetic energy of 20j. What is its velocity
The velocity of the ball after gaining 20 J of kinetic energy is approximately 10 m/s.
We can use the conservation of energy principle to find the haste of the ball after gaining 20 J of kinetic energy.
The conservation of energy principle states that the total energy of a unrestricted system remains constant, meaning that energy can not be created or destroyed, only converted from one form to another. originally, the ball is at rest, which means that it has no kinetic energy. thus, the total energy of the system is equal to the implicit energy of the ball, which is zero. After gaining 20 J of kinetic energy, the total energy of the system is 20J. where KE is the kinetic energy, m is the mass, and v is the haste of the ball.
Rearranging the formula,
we get v = √( 2KE/ m)
Substituting the values given, we get
v = √( 2 × 20 J/0.4 kg) ≈ 10 m/ s
Learn more about kinetic energy at
https://brainly.com/question/17258214
#SPJ4
If light took 7 seconds to travel from a planet to Earth, how far is the planet?
Answer:
Distance=speed×time
Speed of light= 299 792 458 m/s
D= 299 792 458m
[tex]d =299 792 458 m/s \times 8s = 2,398,339,664m[/tex]
Which correctly lists three scientists who supported the heliocentric model of the solar system?
O Aristotle, Ptolemy, Copernicus
O Copernicus, Ptolemy, Kepler
O Galileo, Kepler, Aristotle
O Kepler, Galileo, Copernicus
Answer:
the answer is
Explanation:
Kepler, Galileo, Copernicus
The heliocentric model of the solar system was supported by three prominent scientists: Kepler, Galileo, and Copernicus. These scientists helped to develop and prove the theory that the Sun, not the Earth, is the center of our solar system.
Explanation:The three scientists who supported the heliocentric model of the solar system were Kepler, Galileo, and Copernicus. The heliocentric model proposes that the sun is the center of the solar system, which was a revolutionary theory in the time of these scientists. Copernicus was notable for his book 'On the Revolutions of the Celestial Spheres', where he laid the groundwork for the heliocentric model, Galileo supported Copernicus's theory with his observations using an early telescope, and Kepler refined Copernicus's model with his Laws of Planetary Motion that supported the idea of a sun-centered solar system.
Learn more about Heliocentric Model here:https://brainly.com/question/34610150
#SPJ11
an aluminum loop lies flat on a horizontal surface. a bar magnet is held above the center of the loop with its south pole closest to the loop. if the magnet is moved closer to the loop from this position, what is the direction of the induced current in the loop, as viewed from above as the magnet is moving?
As the bar magnet is moved closer to the aluminum loop, a magnetic field is induced in the loop. The direction of the induced current in the loop, as viewed from above as the magnet is moving, would be counterclockwise. This is because the magnetic field of the bar magnet is changing.
And according to Faraday's Law of Electromagnetic Induction, this change induces an electric current in the loop that flows in a direction to create a magnetic field that opposes the change. In this case, the counterclockwise current creates a magnetic field that opposes the approach of the south pole of the magnet.
A bar magnet is a type of magnet that has a long, straight shape with a north pole at one end and a south pole at the other. Bar magnets can be made from materials that have ferromagnetic properties, such as iron, nickel, or cobalt.
When a bar magnet is suspended or placed on a pivot point, it will align itself in a north-south direction due to the Earth's magnetic field. This property of bar magnets is used in compasses to indicate the direction of north.
The magnetic field of a bar magnet is strongest at its poles, where the magnetic field lines converge, and weakest in the middle. The strength of the magnetic field is proportional to the magnet's magnetic moment, which is determined by the magnet's size, shape, and the magnetic properties of the material it's made from.
To learn more about Bar magnet Here:
https://brainly.com/question/18403251
#SPJ11
an 86 kg construction worker sits down 2.5 m from the end os a 1450 kg steel beam to eat his lunch Part A What is the tension in the cable? Express your answer to three significant figures and include the appropriate units.
The tension in the cable is 1450 N. The appropriate units for tension are newtons (N).
we need to use the principle of torque equilibrium. The torque due to the weight of the steel beam must be balanced by the torque due to the tension in the cable.
The torque due to the weight of the steel beam can be calculated as follows:
torque = weight x distance from the pivot point
torque = 1450 kg x 2.5 m
torque = 3625 N*m
The torque due to the tension in the cable can be calculated as follows:
torque = tension x distance from the pivot point
torque = tension x 2.5 m
Since the system is in equilibrium, these two torques must be equal:
3625 N*m = tension x 2.5 m
Solving for tension, we get:
tension = 3625 N*m / 2.5 m
tension = 1450 N
learn more about tension here:
https://brainly.com/question/13397436
#SPJ11