Go to your backyard or to your high school’s basketball court or tennis court and try out this experiment to see if you can predict motion and inertia accurately. Bring a friend or classmate. Take along a ball.

Select two spots roughly 10 meters apart. Mark each of them clearly. The first spot will be the starting point and the second will be the target.
Ask a friend to run as fast as possible (sprint) carrying the ball from the starting point to the target. Have your friend release the ball when he or she is immediately over the target trying NOT to swing arms when dropping the ball.
Record the results in the table below.
Repeat the sprint at least five times. Record where the ball lands each time.
Next, ask your friend to jog to the target with the ball and drop it. In the table, again record where the ball lands. Do two trials.
For the final test, ask your friend to walk to the target and drop the ball. Also record these results in the table. Do two trials

Answer:

33333.35 kg

Explanation:

I got it right on Acellus, rounded to 33300 sigfigs

When 0.0135 kg of steam at 100°C is cooled, turns it into water at 50.0°C. Then 33,342.45 J of heat has been removed.

Latent heat is the heat absorbed or released by a substance during a change in its physical state without a corresponding change in temperature. This means that the heat energy is being used to break or form intermolecular bonds between the particles in the substance, rather than raising or lowering the temperature. Examples of processes that involve latent heat include melting, freezing, vaporization, and condensation. The amount of heat required or released during these phase transitions is dependent on the substance and the amount of material undergoing the change.

Here in the question,

To solve this problem, we need to use the formula for the heat required to change the phase of a substance, which is given by:

Q = m * L

where Q is the heat required, m is the mass of the substance, and L is the specific latent heat of the substance.

In this case, we need to find the heat required to change 0.0135 kg of steam at 100°C to water at 100°C, and then cool it down to 50°C.

First, we need to find the heat required to change the phase of the steam to water at 100°C. Using the table given, we can see that the specific latent heat of vaporization for water is 2.26 × 10^6 J/kg. So the heat required to change 0.0135 kg of steam to water at 100°C is:

Q1 = m * L = 0.0135 kg * 2.26 × 10^6 J/kg = 30,510 J

Next, we need to find the heat required to cool the water from 100°C to 50°C. Using the specific heat capacity of water, which is 4186 J/(kg°C), we can calculate the heat required as:

Q2 = m * c * ΔT = 0.0135 kg * 4186 J/(kg°C) * (100°C - 50°C) = 2832.45 J

The total heat removed is the sum of the heat required to change the phase of the steam and the heat required to cool the water:

Q = Q1 + Q2 = 30,510 J + 2832.45 J = 33,342.45 J =33.34245 kJ.

Therefore, 33,342.45 J of heat has been removed.

To learn about specific heat click:

https://brainly.com/question/11297584

#SPJ2

Answer:

11.1s

Explanation:

Given parameters:

Height of cliff  = 600m

Unknown:

How long it takes to hit the ground  = ?

Solution:

To solve this problem, we use one of the kinematics equation;

    H  = ut  +  [tex]\frac{1}{2}[/tex]gt²  

H is the height

u is the initial velocity  = 0m/s

t is the time taken

g is the acceleration due to gravity

             600 = [tex]\frac{1}{2}[/tex] x 9.8 x t²  

              600  = 4.9t²  

                 t²  = 122.5

                 t  = 11.1s

Answer:

When something is lifted, work is done on the object against the pull of gravity. This work is converted to a form of potential energy called gravitational potential energy. When the item falls towards Earth like an apple from a tree, gravitational potential energy is converted into kinetic energy.

Answer:

Height of wall (Perpendicular) = 11.31 ft (Approx)

Explanation:

Given:

Base Distance (Base) = 4 feet

Height of ladder (Hypotenuse) = 12 feet

Find:

Height of wall (Perpendicular)

Computation:

Perpendicular = √Hypotenuse² - Base²

Height of wall (Perpendicular) = √12² - 4²

Height of wall (Perpendicular) = √144 - 16

Height of wall (Perpendicular) = √128

Height of wall (Perpendicular) = 11.31 ft (Approx)

Answer:

what?

Explanation:

Answer:

600m/s²

Explanation:

Given parameters:

Mass of car  = 600kg

Impulse  = 18000kgm/s

Time  = 0.05s

Unknown:

Acceleration  = ?

Solution:

To solve this problem, let us find the force that cause the impact first;

          Impulse  = Force x time

          Force  = [tex]\frac{impulse}{time}[/tex]    = [tex]\frac{18000}{0.05}[/tex]    = 360000N

So;

        Force   = mass x acceleration

         Acceleration  = [tex]\frac{Force }{mass}[/tex]    = [tex]\frac{360000}{600}[/tex]    

         Acceleration  = 600m/s²

Answer:

1. Genetic diversity are the differences in DNA among individuals within a species or population while ecosystem diversity is the number or variety of ecosystems within a particular area.

2. Genetic diversity is the genetic material of microorganisms,  plants and animals contains information that  determines the characteristics of all species and  individuals that make up the diversity of the living  world while the ecosystem diversity is the enormous range of terrestrial and  aquatic environments on earth has been classified into a number of ecosystems.

Answer: Gamma rays (violet) have the shortest wavelengths and the highest frequencies.

Explanation: The wavelength of the gamma rays is less than 0.01 nanometers. The frequency of a wave is inversely proportional to its wavelength. That means that waves with a high frequency have a short wavelength, while waves with a low frequency have a longer wavelength.

The electromagnetic waves have the shortest wavelength and the highest frequency is Gamma rays (violet).

Gamma radiation, from gamma rays (γ), is a type of electromagnetic radiation usually produced by radioactive elements. Gamma rays, due to their high energy, are able to penetrate matter more deeply than alpha or beta radiation.

Gamma ray is a type of high frequency electromagnetic radiation usually produced by radioactive elements.

See more about Gamma rays at brainly.com/question/23281551

Answer:

1-3-4-6

Explanation:

not taking the mans answer but just posting it here for people to see it clearly if brushed over on his.

Answer:

The core of the sun is the region that extends from the center to about 20–25% of the solar radius. It is here, in the core, where energy is produced by hydrogen atoms (H) being converted into nuclei of helium (He). ... The core is the only part of the sun that produces an appreciable amount of heat through fusion.

Explanation:

I got you

By not running out of fuel (Hydrogen).

Rest assured ... When the sun runs low on Hydrogen, it'll go through several complex changes, and it'll end up at much much lower temperature, with much much lower energy output.

Answer:

D

Explanation:

Increasing temperature or pressure some times make the condition favorable to the reaction. Similarly increasing surface area  of reacting mixture also helps to increase the reaction rate.

The rate of  a reaction is the rate of decrease in concentration of reactant or the rate of increase in concentration of the products. The rate of a reaction depends on several factors such as temperature, pressure, surface area etc.

Fir an endothermic reaction, as the temperature increases, reaction rate increases. Similarly, as the pressure increases, the reaction in which the number of moles of gaseous reactants is higher than that in products, rate increases.

The concentration of reactants must be sufficient for the reaction and decreasing the concentration of reactants does not favor an increase in reaction rate. Hence, option D is correct.

Find more on reaction rate :

https://brainly.com/question/8592296

#SPJ2

Answer:

Florida is situated closer to the Tropic of Cancer, which receives more constant and direct rays of the sun.

Explanation:

Took the test got it right C

Answer:

1.1 x 10⁵m/s²

Explanation:

Given parameters:

Velocity  = 452m/s

distance  = 0.93m

Unknown:

Acceleration of the bullet  = ?

Solution:

To solve this problem, we use one of the kinematics equation which is given below:

           V² = U²  + 2aS

V is the final velocity

U is the initial velocity  = 0m/s

a is the unknown acceleration

S is the distance traveled  

 So;

          452²   = 0²  + (2 x a x 0.93)

          204304  = 1.86a

               a  = 1.1 x 10⁵m/s²

Answer:

B.Ionizing radiation is the correct answer.

Explanation:

Ionizing radiation has sufficient energy that it can convert atoms and molecules into ions.

It has a sufficient amount of energy that it can separate tightly confined electrons from the orbit of an atom and causing that atom to become ionized.

Answer: lonizing radiation

Explanation:

Got it right

Answer:

d

Explanation:

Answer:

D. Solar panels remove most of the toxic chemicals found in the atmosphere.

People do not believe it is possible to use the sun's energy to create electricity.

Explanation:

I did the test.

Answer:

m = 74.44 kg

Explanation:

p = m × v

670 = m × 9

9m = 670

m = 670/9

m = 74.44 kg

Momentum of an body is defined as the product of mass and velocity.It s unit is kgm/sec.The value of mass will be 74.44 kg.

The measurement of mass in motion is called momentum. Momentum is equal to its mass multiplied by its velocity. Mathematically it is given as;

Momentum = Mass x Velocity

The given data in the problem will be

p is the momentum of runner=670 kgm/sec.

v is the velocity =9m/sec.

m is the mass =?

[tex]\rm p =mv\\\\\rm m =\frac{p}{v} \\\\\rm m =\frac{670}{9} \\\\\rm m =74.44 kg[/tex]

Hence the value of mass will be 74.44 kg.

To learn more about the momentum refer to the link;

https://brainly.com/question/4956182

Answer:

The cart moved away from the starting point between 8 s and 10 s.

Explanation:

Given that :

Which of these does NOT describe the cart’s motion on this graph?

The cart was at rest between 5 s and 7 s : From the distance of golf cart Vs time graph ; the car was at rest between 5s and 7s as the graph was flat with that time interval, meaning there was no change in distance.

The cart moved toward the starting point between 7 s and 12 s. : The graph depicts a negative slope at this time interval as the distance from starting point fell from about 26 m to 10 m

The cart moved away from the starting point between 8 s and 10 s. : At this time interval, the cart moved towards the starting not and not away. This could be seen in the decrease in Distance from starting point between the tune interval.

The cart moved away from the starting point between 2 s and 5 s. - - > The cart moved away from the starting point, with the positive slope signifying an increase in distance.

Therefore, The cart moved away from the starting point between 8 s and 10 s does not describe the motion of the cart on the graph.

Answer:

56000kgm/s

Explanation:

Momentum = Mass * Velocity (both in standard unit)

Therefore, the car's momentum = 1400 * 40 = 56000kgm/s (or 56000Ns)

Explanation:

Total surface area of cylinder:

[tex]2\pi \times r(h + r) \\ 2 \times \pi \times 3.5(3.5 + 2) \\ 2\pi \times 19.25 = 120.951317 \\ 120.95 \: {cm}^{2} [/tex]

sheet of metal required = 120.95 cm^2

Explanation:

Answer:

Given :-

A closed cylindrical tank of radius 3.5 m and height 2 m is made from a sheet of metal.

To Find :-

How much sheet of metal is required.

Formula Used :-

[tex]{\red{\boxed{\large{\bold{T.S.A\: of\: cylinder\: =\: 2{\pi}r(r + h)}}}}}[/tex]

where,

r = Radius

h = Height

Solution :-

Given :

Radius = 3.5 m

Height = 2 m

According to the question by using the formula we get,

⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(3.5 + 2)[/tex]

⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5(5.5)[/tex]

⇒ [tex]\sf T.S.A =\: 2 \times \dfrac{22}{7} \times 3.5 \times 5.5T.S.A=2×722×3.5×5.5

⇒ \sf T.S.A =\: 2 \times \dfrac{22}{7} \times 19.25[/tex]

⇒ [tex]\sf T.S.A =\: 2 \times 60.5[/tex]

➠ [tex]\sf\bold{\purple{T.S.A =\: 121\: {m}^{2}}}[/tex]

∴ 121 m² of sheet of metal is required.

Answer:

Approximately [tex]2.1\; \rm km[/tex], assuming that [tex]g = -9.8\; \rm m \cdot s^{-2}[/tex].

Explanation:

Let [tex]t[/tex] denote the time required for the package to reach the ground. Let [tex]h(\text{initial})[/tex] and [tex]h(\text{final})[/tex] denote the initial and final height of this package.

[tex]\displaystyle h(\text{final}) = \frac{1}{2}\, g\, t^2 + h(\text{initial})[/tex].

For this package:

Solve for [tex]t[/tex], the time required for the package to reach the ground after being released.

[tex]\displaystyle t^{2} = \frac{2\, (h(\text{final}) - h(\text{initial}))}{g}[/tex].

[tex]\begin{aligned} t &= \sqrt{\frac{2\, (h(\text{final}) - h(\text{initial}))}{g} \\ &\approx \sqrt{\frac{2\times (0\; \rm m - 2500\; \rm m)}{(-9.8\; \rm m \cdot s^{-2})}} \approx 22.588\; \rm s\end{aligned}[/tex].

Assume that the air resistance on this package is negligible. The horizontal ("forward") velocity of this package would be constant (supposedly at [tex]95\; \rm m \cdot s^{-1}[/tex].) From calculations above, the package would travel forward at that speed for about [tex]22.588\; \rm s[/tex]. That corresponds to approximately:[tex]95\; \rm m \cdot s^{-1} \times 22.588\; \rm s \approx 2.1 \times 10^{3}\; \rm m = 2.1\; \rm km[/tex].

Hence, the package would land approximately [tex]2.1\; \rm km[/tex] in front of where the plane released the package.

Answer:

wtfffff

Explanation:

wtffffff

Answer:

The charge 3q must be placed at a distance of 1.73d away from the origin.

Explanation:

The electric field at the origin due to q at distance, d from the origin is E = q/4πε₀d².

The electric field at the origin due to 2q at distance, d from the origin is E' = -2q/4πε₀d². (It is negative since it its directed towards the negative x-axis)

Now, the net electric field at the origin due to both charges is thus E" = E + E' = q/4πε₀d² + (-2q/4πε₀d²) = q/4πε₀d² - 2q/4πε₀d² = -q/4πε₀d².

The electric field due to 3q at a distance x from the origin is E₁ = 3q/4πε₀x².

Now, the net electric field E' must cancel out E₁ so that the electric field at the origin is zero.

So, E' + E₁ = 0

E' = -E₁

-q/4πε₀d² = -3q/4πε₀x²

1/d² = 3/x²

taking inverse of both sides, we have

x²/3 = d²

multiplying both sides by 3, we have

x² = 3d²

taking square root of both sides, we have

x = (√3)d

x = ±1.73d

So, the charge 3q must be placed at a distance of 1.73d away from the origin.

Answer:

e

Explanation:

Answer:D.Compound

Explanation: internet

Answer:

0.2g/cm³  

Explanation:

Given parameters:

Mass of the beef  = 11.6g

Volume  = 58cm³  

Unknown:

Density  = ?

Solution:

Density is the mass per unit volume of a substance.

  Density  = [tex]\frac{mass}{volume}[/tex]  

So;

  Density  = [tex]\frac{11.6}{58}[/tex]    = 0.2g/cm³  

Answer:

What is the chemical formula for the molecule represented by the model?

[tex] →CHO\\ →C_4H_9O_2✓ \\→C_4H_8O \\ →C_3H_8O_2[/tex]

Answer:

0.5 m/s2

Explanation:

accelration formula : final velocty - starting velocity divided by time

Answer:

my mind cant comprehend a shing word u just said

Explanation:

The probes collect data, they capture the movement in space, therefore, spacecraft that carry instruments to collect data about objects in space are called probes, So the given statement is correct.

Any conductor that is placed into a plasma and gathers current is a probe. Measurements of the current on the probe as a function of the bias potential given to the probe can be used to identify a plasma's properties.

Such probes affect their surroundings while directly detecting electron and ion flows in the plasma. Any conductive material (wire, foil, chamber walls, etc.) can serve as a plasma probe; nevertheless, precise control over the probe's size, shape, and substance is necessary to achieve detectable plasma levels. Astronauts are not present aboard probes. Scientists can analyze the data the probes relay back to Earth. Sputnik 1 was the first spacecraft to launch.

Because probes probably collect data, they capture the movement in space, therefore, spacecraft that carry instruments to collect data about objects in space are called probes.

To know more about probes:

https://brainly.com/question/12992890

#SPJ2