Answer:
scientific community's consensus on the human causes of global climate change
Explanation:
How are energy and work related? A. Energy is the force needed to do work B. Work times energy is force C. Energy is the capacity to do work D. Work and energy are the same
Answer:
I believe the answer is A
Explanation:
Work and energy are related because when you work, you cause displacement in the object you are exerting upon. While this happens, you transfer energy between the systems. Both work and energy share the same SI unit, called the joule.
You have been assigned to prepare 50.0 mL of a 3.0 %(v/v) solution in a volumetric flask from a 20.0% (v/v) Red Food Coloring (RFC) stock solution provided. Use the equation below to calculate the amount in (mL) of the RFC stock solution to prepare your assigned % solution.
Answer:
7.5mL of the stock solution
Explanation:
A stock solution is a concentrated solution that is used to make another more diluted solution.
In the problem, the RFC solution is 20% (v/v). That means contains 20mL of RFC in 100mL of solution.
Yo need to prepare 50.0mL of a 3.0% (v/v), solution (3mL of RFC in 100mL of solution). That means you need:
50.0mL solution × (3mL RFC / 100mL solution) = 1.5mL of RFC. These RFC must come from the stock solution
As your stock solution contains 20mL of RFC per 100mL of solution, you will need:
1.5mL RFC × (100mL stock / 20mL RFC) =
7.5mL of the stock solutionhow many hydrogen atoms do you have four molecules of glucoes
Molecules of glucose (blood sugar) contain 6 carbon atoms, 12 hydrogen atoms, and 6 oxygen atoms.
Hope this helped :)
Describe how you would draw a diagram that shows the electric field between two particles that attract each other.
Answer:
Since the particles attract each other, I would draw one positive (+) charge close to one negative (–) charge. To show the electric field, I would draw lines coming out in all directions from each charge. Then I would add arrows pointing away from the + charge and pointing toward the – charge. Finally, I would connect the lines coming from the + charge to the ones going toward the – charge to make the loops of the electric field.
Explanation:
this is definitely the right answer my teacher accidently gave me the answer
your welcome
According to the forces of attraction, the diagram representing the electric field between two particles that attract each other is drawn showing two unlike poles towards towards each other.
What are forces of attraction?Forces of attraction is a force by which atoms in a molecule combine. it is basically an attractive force in nature. It can act between an ion and an atom as well.It varies for different states of matter that is solids, liquids and gases.
The forces of attraction are maximum in solids as the molecules present in solid are tightly held while it is minimum in gases as the molecules are far apart . The forces of attraction in liquids is intermediate of solids and gases.
The physical properties such as melting point, boiling point, density are all dependent on forces of attraction which exists in the substances.
Learn more about forces of attraction,here:
https://brainly.com/question/10957144
#SPJ2
What molecule can form hydrogen bonds with others like it A. CF4 B. HCL C. CO2 D. NH3
Answer:
D. NH3
Explanation:
Hydrogen bonding exists only between hydrogen atoms, and is one of the strongest intramolecular forces. So you eliminate your choices down to B and D. HCl can't form Hydrogen bonding because of electron density and electronegativity but NH3 can, so your answer would be D.
When a gas is put in a container it...
a. does not change shape.
b. fills up the container.
c. fills up the container and fills it up top to bottom.
Answer:
c.is the answer..not sure...but i think so
Which is the stronger acid- sulfuric or ethanoic? What is the evidence for this?
Please answer quickly
Answer:
Sulfuric acid
Explanation:
Sulfuric acid is stronger than ethanoic acid because H+ ions or proton totally ionise in sulfuric acid (H2SO4) whereas in ethanoic acid (CH3COOH) H+ ion partially ionises. The resultant anion of sulfuric acid (HSO4-) is more stable than anion of ethanoic acid (CH3COO-).
So, ethanoic acid is a weak electrolyte and is less stronger than sulfuric acid.
Hence, the correct answer is sulfuric acid.
zinc is very essential element for human body, why? give reason.
Answer: Function
Explanation: Zinc is found in cells throughout the body.
It is needed for the body's defensive (immune) system to properly work.
It plays a role in cell division, cell growth, wound healing, and the breakdown of carbohydrates.
what is the chemical test to differentiate ethanol from ethanoic acid
Answer:
We can distinguish between ethanol and ethanoic acid by reacting them with a metallic carbonate like Na2CO3 or a bicarbonate like NaHCO3 ....... ethanoic acid reacts to give to give CO2 and no reaction takes place in case of ethanol.
¿A qué grupo pertenecen los átomos de Z = 8, Z= 36 y Z=39? ¿Cuántas capas de electrones tiene cada uno? ¿Cuántos electrones harían falta para llenar la capa más externa?
Answer:
Mira la explicación.
Explanation:
¡Hola!
En este caso, podemos encontrar facilmente el grupo al que pertenecen dichos elementos con números atómicos 8, 36 y 39 respectivamente mediante su búsqueda en la tabla periódica. Así, z=8 corresponde a oxígeno, z=36 a kriptón y z=39 a itrio.
Por otro lado, para saber el número de capas, debemos desarrollar la configuración electrónica para cada uno:
[tex]O: 1s^2,2s^2,2p^4\\Kr: 1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^{10},4p^6\\Y:1s^2,2s^2,2p^6,3s^2,3p^6,4s^2,3d^{10},4p^6,5s^2,4d^1[/tex]
Con esto, vemos que oxígeno tiene dos capas, kripton cuatro capas e iritrio cinco, a lo que a oxígeno le faltan dos electrones para llenar dicha capa, a kripton ninguno y a iritrio nueve.
Saludos.
Hydrogen + Nitrogen
Ammonia
Answer:
Ammonia, NH3, is a chemical compound composed of one nitrogen atom and three hydrogen atoms.
Explanation:
i hope this will help you :)
Answer:
3H2 + N2 ---> 2NH3
Explanation:
3H2 + N2 ---> 2NH3
Hydrogen + Nitrogen Ammonia
what's sodium chromate formula without subscript
Answer:
Na2CrO4
Explanation:
it cannot be without subscript
A 3.00 L cylinder at 25 degrees Celsius contains a mixture of 3 gases: He, N2, and Ar at partial pressures of 115, 285, and 325 torr, respectively. If all the He is removed from the mixture and the temperature does not change, what will be the partial pressure, in torr, of the N2
Answer:
[tex]P_{N_2}=285 torr[/tex]
Explanation:
Given that
Volume of cylinder = 3 L
Temperature= 25 degrees
Partial pressure of the gases
[tex]P_{He}=115 torr[/tex]
[tex]P_{N_2}=285 torr[/tex]
[tex]P_{Ar}=325 torr[/tex]
By using Dalton's law , the total pressure of the non reacting gas is the sum of the partial pressure of all gases.
[tex]P_{total}=P_{He}+P_{N_2}+P_{Ar}[/tex]
[tex]P_{total}=115+285+325=725 torr[/tex]
When all the He gas will removed then partial pressure of He will be zero.
[tex]P_{total}=P_P_{N_2}+P_{Ar}[/tex]
[tex]P_{total}=285+325=610 torr[/tex]
Partial pressure of N₂
[tex]P_{N_2}=610-325=285 torr[/tex]
[tex]P_{N_2}=285 torr[/tex]
ON A TIMER!!! PLZ HELP ME!!!
Consider the reaction below. *Image* Which is the net ionic equation for the reaction?
Answer:
C2H3O2^-(aq) + H^+ —> HC2H3O2
Explanation:
The following equation was given in the question:
Na^+ + C2H3O2^-(aq) + H^+ Cl^- —> Na^+ + Cl^- + HC2H3O2
Now, to obtain the net ionic equation, we simply cancel out the ions common to both side of the equation.
A careful observation of the equation above, shows that sodium ion, Na^+ and chloride ion, Cl^- are common to both side of the equation.
Therefore, to obtain the net ionic equation, we simply cancel out Na^+ and Cl^- from both side of the equation. This is illustrated below:
Na^+ + C2H3O2^-(aq) + H^+ Cl^- —> Na^+ + Cl^- + HC2H3O2
C2H3O2^-(aq) + H^+ —> HC2H3O2
Therefore, the net ionic equation is
C2H3O2^-(aq) + H^+ —> HC2H3O2
What is the percent yield of ferrous sulfide if the actual yield is 220.0 g and the theoretical yield is 275.6 g? Use Percent yield equals StartFraction actual yield over theoretical yield EndFraction times 100.. 12.5% 55.6% 79.8% 87.9%
Answer:
79.8%
Explanation:
Percentage yield = actual yield / theoretical yield x 100%
Percentage yield = 220.0 / 275.6 x 100%
=79.8%
The percent yield of of ferrous sulfide if the actual yield is 220.0 g and the theoretical yield is 275.6 g is 79.8%.
What is percent yield?Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.
In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.This condition arises when there are other simultaneous reactions taking place leading to the formation of product. It can also arise if there is incomplete removal of impurities from the sample .
In the given example, percent yield can be found out by substituting values in mentioned formula. percent yield,=220/275.6×100=79.8%.
Learn more about percent yield,here:
https://brainly.com/question/2506978
#SPJ5
how many moles of water (H2O) would be produced from the reaction of 3.25 moles of hydrochloric acid (HCL) reacting with excess calcium hydroxide (Ca(OH)2)
Answer:
3.25 moles of H2O
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
2HCl + Ca(OH)2 —> CaCl2 +2H2O
Now, we can obtain the number of mole H2O produced from the reaction as follow:
From the balanced equation above,
2 moles of HCl reacted to produce 2 moles of H2O.
Therefore, 3.25 moles of HCl will also react to produce 3.25 moles of H2O.
Therefore, 3.25 moles of H2O were produced from the reaction.
What marine province contains deep ocean trenches that form along convergent plate boundaries as a result of subduction?
A. Mid-ocean ridge
B. Deep ocean basin
C. Abyssal plain
. Continental margin
Answer:
A.Mid ocean ridge i think
Explanation:
your answer is B my guy
1 Cup of Boiling Water
WAPHS Swimming Pool
(100 °C)
or
(25 °C)
• What is the difference between thermal energy and
temperature?
aterials
Enosh
Odates
ades
stery
endance
mbers
• The boiling water has a much higher temperature... What
does that mean?
nferences
enuity Ele
enuity se
sela
• Which has more thermal energy? Why?
Note Cla
Learnir
9
1 Mop
Answer:
Side photo
A small still is separating propane and butane at 135 °C, and initially contains 10 kg moles of a mixture whose composition is x = 0.3 (x = mole fraction butane). Additional mixture (x = 0.3) is fed at the rate of 5 kg mole/hr. The total volume of the liquid in the still is constant, and the concentration of the vapor from the still (xp) is related to x, as follows: Xp = How long will it take for X, to change from 0.3 to 0.35.
Answer: A swimming pool at 40°C is at a lower temperature than a cup of tea at 90°C. However, the swimming pool contains a lot more water. Therefore, the pool has more thermal energy than the cup of tea even though the tea is hotter than the water in the pool.
Explanation: Heat and Temperature do not mean the same thing. ... A swimming pool at 40°C is at a lower temperature than a cup of tea at 90°C. However, the swimming pool contains a lot more water. Therefore, the pool has more thermal energy than the cup of tea even though the tea is hotter than the water in the pool.
Fredo’s spaceship takes him to the very edge of known space. There, gravity has no effect at all. Fredo takes a baseball and tosses it into space. What will most likely happen to the ball? It will not move at all. It will return to Fredo’s spaceship. It will eventually stop moving. It will continue moving in a straight line.
Answer:
D. It will continue moving in a straight line.
Explanation:
When Fredo takes a ball and tosses it into space, the ball will move upward infinitely.
Gravity is the downward force that acts on an object.
Without gravity, or without the effect of gravity, an object will continue to move in its path with the original direction applied to it.
Answer:
D
Explanation:
I took the test
Production of synthetic fibers helps in the conservation of forests comment
Answer:
Explanation:
Synthetic fibres are made using chemicals. Hence they do not require any forest resources like wood. This helps in saving the trees from cutting down. So the production of synthetic fibers helps in the conservation of forests.
Natural fibres on the other hand require forest products like wood for its manufacture.
Hope this helps
plz mark it as brainliest!!!!!!!!!
Answer:
yes, they do help in conservating the forest resources.
Explanation: This is because synthetic fibers like rayon, nylon etc are made from petrochemicals which helps to substitute usage of natural resources like cotton etc. and these synthetic fibers are more durable than natural fibers, which adds to their usage and in turn, helps to conserve forest resources.
Name the 2 fractions of petroleum which are used as fuel. Explain.
Answer: kerosene, coal
Explanation:
These are renewable resources obtained from petroleum, kerosene was used in olden times to light the lamps and are still used today for lighting purposes. Coal was used in trains to produce steam( steam powered trains).
Answer:
Fuel Oil and Kerosene Oil are used as fuel. They are an important part of our life. Kerosene Oil is primarily used in the laboratory. Fuel Oil is used in power stations.
What type of compound are carbon tetrachloride and boron trihydride?
Answer:
hydrocarbon
Explanation:
these are called hydrocarbons
Dr. Tate and Dr. Ramirez are observing the effects of a type of solar activity that has reached the planet Jupiter. What solar activity are they observing? a.solar flares b.sunspots c.prominences d. solar winds
Answer:
d. solar winds
Explanation:
Dr. Tate and Dr. Ramirez are observing solar winds coming from the sun. Solar winds occurs naturally in which the particles such as electrons and photons releases from the surface of the sun into the space. These solar winds moves in the solar system and interact with planets of the solar system. Dr. Tate and Dr. Ramirez are the two well known scientist observing the effects of solar winds that has reached the planet Jupiter.
If you have a volume of 10 mL and a mass of 100 kg, what is the density?
You are on an island and need freshwater to drink. Which process could you
use to separate the salt from ocean water and provide freshwater for
drinking?
O A. Distillation
B. Chromatography
C. Filtering
O D. Freezing
Answer:
A
Explanation:
The reason it is distillation is due to the fact that we can use distillation to heat the ocean water. As water has a lower boiling point than the salt solution, it evaporates and the salt stays behind.
C AL= -4.184 × 39.85 × 4.7 ÷ 11.98 × (-72.9)
Answer:
4,768.57
Explanation:
If you are asking us to calculate, your answer is above. Easiest and fastest way is to plug it into the calc.
Boiling point of water at 750 mmHg is 99.63⁰C. How much sucrose is to be added to 500 g of water such that it boils at 100⁰C. Kb for water 0.52 K Kg mol-1
Answer:
121.67 g is to be added to 500 g of water
Explanation:
Given that:
Pressure = 750 mmHg
Temperature T₁= 99.63⁰C = (273 + 99.63 ) = 372.63K
mass of water = 500 g
Temperature T₂ = 100⁰C = ( 273 + 100) K = 373 K
where;
Kb for water 0.52 K Kg mol-1
For sucrose; C₁₂ H₂₂ O₁₁
Molar mass = ( 12 × 12 )+ ( 1 × 22 ) + ( 16 × 11 )
Molar mass = 342 g/mol
ΔT = T₂ - T₁
ΔT = (373 - 372.63)K
ΔT = 0.37 K
∴ the amount of sucrose to be added to 500 g of water is:
[tex]= \dfrac{0.37\times 342 \times 500}{0.52 \times 1000 }[/tex]
[tex]= \dfrac{6327}{52}[/tex]
= 121.67 g
Thus; 121.67 g is to be added to 500 g of water
When a catalyst is added to a reversible reaction in equilibrium state the value of equilibrium constant
Explanation:
The value of equilibrium constant doesn't change when a catalyst is added.
Equilibrium constant depends on Concentration of reactants , Pressure and Temperature.
A suitable catalyst can improve the reaction rate. A catalyst is a material that increases the rate of a chemical reaction, but in the end, it remains unchanged chemically. It offers a lower energy alternative reaction path.
The balance of forwarding and reverse reaction rates is equal for a reversible reaction. In the presence of a catalyst, both reaction rates accelerate and expect the users to weigh more quickly.It is important to remember that adding a catalyst has no impact at all on the final balance of said reaction, which is faster.Learn more:
brainly.com/question/14784580
Which produces oxygen-18 when it undergoes beta decay? A. oxygen-17 B. oxygen-18 C. fluorine-17 D. fluorine-18
Answer:
Option D. fluorine-18
Explanation:
The attached photo gives the explanation.
In the attached photo, A zX represent the atom that will undergo beta decay to produce oxygen–18.
After the calculation, A zX was found to be fluorine–18.
For question numbers 1 and 2, two statements are given - one labelled
Answer to these questions from the codes (i), (ii), (ub and (iv) as given
Both (A) and (R) are true and (R) is correct explanation of the
assertion (A).
(ii)
Both (A) and (R) are true, but (R) is not the correct explanation of
the assertion (A).
(iii)
(A) is true, but (R) is false.
(iv) (A) is false, but (R) is true.
Assertion (A) : Carbon has a strong tendency to either lose or gain
electrons to attain noble gas configuration.
Reason (R):
Carbon has four electrons in its outermost shell and has
the tendency to share electrons with carbon or other
elements.
Assertion (A) and the other labelled Reason (R). Select the correct
Answer:
(iv) (A) is false, but (R) is true.
Explanation:
It is not true that carbon has a strong tendency to either lose or gain electrons to attain noble gas configuration. Carbon is a member of group 14, it is the first member of the group and carbon is purely a non metal. Only metals metals can loose electrons to attain the noble gas configuration. Moreover, carbon does not participate in ionic bonding so it does not gain electrons to attain the noble gas configuration.
However, carbon participates in covalent bonding where it is covalently bonded to four other chemical species using its four outermost electrons. Carbon forms covalent bonds in which four electrons are shared with other chemical species.