Answer:
The enthalpy of the reaction asked is -284 kJ/mol.
Explanation:
Given:
[tex]C(s) + \frac{1}{2}O_2(g)\rightarrow CO(g), \Delta H_1 = -111 kJ/mol [/tex]..[1]
[tex]C(s) + O_2(g)\rightarrow CO_2(g) \Delta H_2 = -395 kJ/mol[/tex]...[2]
To find ; [tex]\Delta H_{rxn}[/tex] of following reaction :
[tex]CO(g) + \frac{1}{2}O_2(g)\rightarrow CO_2(g), \Delta H_{rxn} =?[/tex]..[3]
Using Hess's Law:
[2] - [1] = [3]
[tex]\Delta H_{rxn}=\Delta H_2-\Delta H_1=-395 kJ/mol-(-111 kJ/mol)=-284 kJ/mol[/tex]
The enthalpy of the reaction asked is -284 kJ/mol.
2. If the reaction of 5.75 moles of sodium with excess hydrofluoric acid is able to produce 2.49 mol H2, what is the percent yield of hydrogen gas?
Unbalanced equation:
Na + HF –> NaF + H2
94.2%
86.5%
43.3%
23.1%
Answer:
86.5%
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
2Na + 2HF –> 2NaF + H2
Next, we shall determine the theoretical yield of the hydrogen gas, H2. This is illustrated:
From the balanced equation above,
2 moles of Na reacted to produce 1 mole of H2.
Therefore, 5.75 moles of Na will react to produce = (5.75 x 1)/2 = 2.88 moles of H2.
Therefore, the theoretical yield of Hydrogen gas, H2 is 2.88 moles.
Finally, we shall determine the percentage yield of Hydrogen gas, H2. This can be obtained as follow:
Actual yield of H2 = 2.49 moes
Theoretical yield of H2 = 2.88 moles
Percentage yield of H2 =.?
Percentage yield = Actual yield /Theoretical yield x 100
Percentage yield = 2.49/2.88 x 100
Percentage yield = 86.5%
Therefore, the percentage yield of Hydrogen gas, H2 is 86.5%.
What element has the electron configuration 1s^22s^22p^63s^23s^23p^4?
Answer: it’s S
Explanation:
The element with electronic configuration of 1s²2s²2p⁶3s²3p⁴ is sulphur (S)
The correct answer to the question is Option C. S
Electronic configuration is simply defined as the arrangement of electrons around the nucleus of an atom.
With the electronic configuration of an element, we can obtain the name of the element by simply obtaining the total number of electrons in the shells and comparing it with those in the periodic table.
From the question given above,
Electronic configuration => 1s²2s²2p⁶3s²3p⁴
Name of element =?Total electron = 2 + 2 + 6 + 2 + 4 = 16
Thus, the element has 16 electrons. This is assumed to be atomic number of the element.
Comparing the atomic number of the element (i.e 16) with those in the periodic table, the element is Sulphur with the symbol S.
Therefore, the element with electronic configuration of 1s²2s²2p⁶3s²3p⁴ is sulphur (S)
Option C. S gives the correct answer to the question.
Learn more: https://brainly.com/question/6945670
Hi :) how to do 4(b)?
Answer:
they produce water and a neutral ionic compound called a salt. The reaction is called a neutralization reaction.
Explanation:
The functional group for an ester is: RCHO RCOOH RCOOR ROH
Answer:
RCOOR
Explanation:
Odyssey ware
RCOOR is the functional group for an ester. An ester is an organic molecule created when an acid and an alcohol interact. The general structure of the compound is RCOOR, where R is an aryl or alkyl group.
What is the way for the structure ?This functional group is made up of an alkyl or aryl group (R) and a carbonyl group (C=O) linked to an oxygen atom. Two additional carbon atoms, one of which is a member of the carbonyl group and the other of which is a member of the alkyl or aryl group, are joined to the oxygen atom.
The connection between the oxygen atom and the hydrogen atom of the acid is broken during the interaction of an acid with an alcohol to create an ester.of a fresh connection between the oxygen atom and the alcohol's alkyl or aryl group. As a result, the RCOOR functional group is created.
Esters are significant organic substances with many different uses. They serve as solvents and are employed in the synthesis of flavours, perfumes, polymers, medicines, and other products. They are also employed in the creation of fragrances and cosmetics, as well as as lubricants. Other organic compounds can be made using esters as intermediates.
Learn more about organic compounds at:
https://brainly.com/question/13508986
#SPJ3
Plants can only
cause mechanical weathering.
Please select the best answer from the choices provided
OT
OF
Answer:
Ice wedging, pressure release, plant root growth, and abrasion can all cause mechanical weathering. in the cracks and pores of rocks, the force of its expansion is strong enough to split the rocks apart. This process, which is called ice wedging, can break up huge boulders.
Answer:
f
Explanation:
? Question
Select the correct answer.
Which statement about mass wasting is correct?
O Mass wasting is rocks moving downhill.
o Earthquakes cause all mass wasting.
O Gravity drives all mass wasting.
O All mass wasting happens on mountains.
Answer:
Gravity drives all mass wasting.
Explanation:
Mass wasting can be defined as the process of wasting away of earth's outer crust. This movement is also known as slope movement that causes large rock, soil, and debris to move downward, a force driven by gravity.
The term is often used interchangeably with landslide yet it is different. It is also known as mass movement as is cause massive downslope movement of rock, regolith, snow, ice, and-the-like on the earth's outer crust.
All these movements are driven mainly by gravity. Gravity consantly tries to pull the rocks and soil down the slope but the resisting power. also known as shear strength, of moutains helps them to deny the gravitional force.
Thus from the given options the statement that can be said to be true about mass wasting is that mass wasting is driven by gravity. So, the correct option is C.
Answer:
C. Gravity drives all mass wasting.
Explanation:
Plato answer
find the ph of o.o3 h2so4
Answer: 1.5
Explanation:
The pH of a solution is given by the formular; pH = - log [ H+ ]. Therefore, for H2SO4, it is;
pH = - log [ 3 x 10 ∧ -2]
= 2 - log 3
= 2 - 0.4771 = 1.5 approximately
What are thermal plasmas?
plasmas that have particles that collide infrequently
plasmas that reach a temperature equal to their surroundings
plasmas that do not reach thermal equilibrium
plasmas that have only a few particles ionized at any given mom
Answer:
B
Explanation:
Scientists hypothesize that a certain species of animal existed in the past.
But, fossils of the species have never been found. Which two statements
could explain why?
A. There were very few members of the species.
B. Their bodies decomposed quickly.
O C. Their bodies contained radioactive atoms.
D. Minerals seeped into their bones.
SUBMIT
Answer: Fossils of the species have never been found because:-
a. There were few members of the species.
d. Their bodies decompose quickly.
For an organism to become fossil it is important that it do not decompose before it get buried by sediments.
What are fossils?
A fossil is any preserved remains, impression, or trace of any once-living thing from a past geological age.
To know more about fossil formation here
brainly.com/question/1196730
Answer: The answer is B and A.
Explanation:
I took the test!
At a certain temperature, Ke = 3 for the reaction NO3(g) NO(g) + O2(g) Find the direction of thereaction if at some point in time in a 1.0 vessel the following respective concentrations were measured; [NO] = 2.0 mol/L, [O2] = 1.0 mol/L and NO3(g) = 0.75 mol/L.
The pH of a substance can only be determined when it is
a) dried in a powder
b) frozen
c) dissolved in water
d) heated
The pH of a substance can only be determined when it is frozen. Hence, option B is correct.
What is pH?pH stands for Hydrogen potentials.
The use of the pH scale is one practical way of quantitatively determining how acidic something is.
If the pH of a solution is less than 7, it is acidic. If the pH is 7, the solution is neutral and if the pH is greater than 7,the solution is basic.
The pH of a substance can only be determined when it is frozen. Hence, option B is correct.
Learn more about the pH here:
https://brainly.com/question/874715
#SPJ2
How many grams of N2 can be produced when 6.50 g of O2
reacts?
Answer:
3.79 g of N2.
Explanation:
We'll begin by writing the balanced equation for the reaction.
This is given below:
4NH3 + 3O2 → 2N2 + 6H2O
Next, we shall determine the mass of O2 that reacted and the mass of N2 produced from the balanced equation.
This is illustrated below:
Molar mass of O2 = 16x2 = 32 g/mol
Mass of O2 from the balanced equation = 3 x 32 = 96 g
Molar mass of N2 = 2x14 = 28 g/mol
Mass of N2 from the balanced equation = 2 x 28 = 56 g
Summary:
From the balanced equation above,
96 g of O2 reacted to produce 56 g of N2.
Finally, we shall determine the mass of N2 produced by reacting 6.50 g of O2.
This can be obtained as follow:
From the balanced equation above,
96 g of O2 reacted to produce 56 g of N2.
Therefore, 6.50 g of O2 will react to produce = (6.50 x 56)/96 = 3.79 g of N2.
Therefore, 3.79 g of N2 were obtained from the reaction..
I really need help!!!
look at the three chemical equations below. How many atoms of each element are in reactants? How many atoms of each element are in the products?
2H2 + O2➔ 2H2O
2Fe203➔ 4Fe+ 3O2
CI2+ 2NaBr➔ 2NaCI+ Br2
Q10. Calcium fluoride can be made from the reaction of calcium metal with fluorine gas. The image shows this reaction. Explain how the product is formed in terms of electron movement and what the final electron configurations are
Answer:
The answer to your question is given below
Explanation:
In this reaction, the calcium metal, Ca loses two electrons to form calcium ion, Ca^2+ and two fluorine atoms, F receives the two electrons to form two fluoride ion, F^-.
This is illustrated by the following equation:
Ca —> Ca^2+ + 2e
2F + 2e –> 2F^-
Ca + 2F + 2e —> Ca^2+ + 2F^- + 2e
Cancel out 2e
Ca + 2F —> Ca^2+ 2F^-
Thus, the electronic configuration can be written as follow:
Before combination:
Calcium, Ca (20) => 2, 8, 8, 2
Two fluorine atom, F (9) => 2, 7 and 2, 7
After combination:
Calcium ion, Ca^2+ => 2, 8, 8
Two fluoride ion, F^- => 2,8 and 2,8
Which lifestyle is most likely to lead to infertility in a male ?
A man who works as a mechanic
A man who works as a computer programmer and sits at desk magority of the day
A semi professional athlete
A man who works for a company’s that applies pesticides to lawns
Answer:
The second on, A man who works as a computer programmer and sits at desk magority of the day.
Explanation:
Answer:
Explanation:
The only answer I can think as being possible is the last one. Pesticides are chemicals that go after unwanted animal life. They do not know that they should not attack human beings.
Infertility could very well be one of the side effects of a pesticide. There are others as well. Some pesticides go after the central nervous system (think mice and rats) and those are dangerous to use and to leave around.
The others all involve occupations that either require authentic abilities or mental astuteness. Neither should affect a man's ability to reproduce.
If the pH of a solution is 7.6, what is the pOH? A. 6.4 B. 8.4 C. 5.4 D. 7.4
Answer:
6.4
Explanation: pH
+
pOH
=
14
So if
pH
=
7.6
then
pOH
=
14
−
pH
=
6.4
Explanation:
Wrote this out spaced so it's more clear.
In order from left to right, what are the coefficients (front numbers) needed to
balance the following equation? CzH6 + O2- CO2 + H20*
Answer:
10CH6 + 10O2 → 10CO2 + 3H20
Explanation:
In the past mining companies were not made responsible for the clean-up of any of
the mine sites. As a result, abandoned mines had a severe impact on the
environment in Ontario. Which of these is not a result of these mining practices?
a)
Chemical reactions producing sulphuric acid decrease soil and water ph in the
area.
b)
Acid leaching dissolves metals found in the soil thus allowing them to enter
the water system.
c)
Heavy metals which are left tailing ponds can dissolve and enter the water
system.
d)
Old and inefficient mining smokestacks contaminate the soils around
abandoned mine sites.
In the equation 2KCIO3 → 2KCI + 302, how many moles of oxygen are produced when 12.61 mol of
KCIO3 decompose completely?
Select one:
O a. 19
Ob. 8.4
O c. 6.3
O d. 13
PLEASE I AM BEGGING PLEASE HELP ME
Answer:
A 19
Explanation:
2 mole of KClO3 produces 3 mole of O3
2 : 3
1 : 3/2
12.61 : 3/2 × 12.61
12.61 : 18.9
12.61 mole of KClO3 produces 18.9mole of O2.
Mass box A = 10 grams; Mass box B = 5 grams; Mass box C-made of one A and one B
How many boxes of B would be required to make 30 grams of C?
hy
Answer:
2 boxes
Explanation:
==>Given that:
Box A = 10 grams
Box B = 5 grams
Box C= 1 A and 1 B = 15 grams
==>Required:
Number of boxes of B that would make 30 grams of C
==>Solution:
We know that, 1 box of B would give us 15grams of of C when mixed in the right proportion with 1 box of A.
thus,
1 box of B => 15 grams of C
x box of B => 30 grams of C
Therefore x = (30*1)/15
x = 30/15
x = 2
2 boxes of B would be required to make 30 grams of C
In this lab procedure, the ___ variable is the number of half-life cycles (time) and the ___ variable is the number (or fraction) of (radioactive) Lincolnium nuclei remaining at that time.
Answer:
Independent, Dependent
Explanation:
In the given lab procedure, the number of half-life cycles or the time in which the number of nuclei in radio-active substance turns into its half would be characterized as the 'independent' variable as it directly affects the dependent variable i.e. 'the number(or fraction) of Lincolnium nuclei remaining at that time.' The number of nuclei would be the dependent variable as it bears the change or effect of a change in the independent variable(half-life cycle).
Answer:
Its independent and dependent
Explanation:
On Edge 2021
SERE
What type of energy is the sum of an object's potential and kinetic energy?
mechanical energy
electromagnetic energy
chemical energy
thermal enemy
Answer:
Mechanical energy
Answer:
Mechanical Energy
Explanation:
The mechanical energy is the sum of the objects potential energy (energy the object possess due to its position) and its kinetic energy (energy the object possess due to its motion). Adding this two energies together, gives the total mechanical energy.
Which of the following elements will not form a polar covalent bond with oxygen?
A. Hydrogen
B. Sodium
C. Oxygen
D. Fluorine
sodium will form an ionic bond
Answer:
C. Oxygen
Explanation:
Oxygen will not form a polar covalent bond with another oxygen atom because when 2 atoms of the same element bond, it is a nonpolar covalent bond.
Since they are the same element, the 2 oxygens have the same electronegativity and will share their electrons equally.
Polar covalent bonds involve 2 atoms that will share electrons unequally
Nitrogen dioxide and water react to produce nitric acid, HNO3,
and nitrogen oxide.
3NO2(g) + H2O(l) — -→ 2HNO3(aq) + NO(g)
a. How many grams of H20 are required to react with 28.0 g
of NO2?
b. How many grams of NO are produced from 15.8 g of H2O?
c. How many grams of HNO3 are produced from 8.25 g of NOZ?
Answer:
Explanation:
a )
3NO₂(g) + H₂O(l) — -→ 2HNO₃(aq) + NO(g)
3 x 46 g 18 g 2 x 63 g 30 g
138 g of NO₂ requires 18 g of H₂O
28 g of NO₂ requires ( 18 / 138) x 28
= 3.65 g of H₂O.
b )
18 g of H₂O produces 30 g of NO gas
15.8 g of H₂O produces ( 30/18 ) x 15.8
= 26.33 g of NO gas .
c )
138 g of NO₂ produces 126 g of HNO₃
8.25 g of NO₂ produces (126 / 138 ) x 8.25
= 7.53 g of HNO₃
Determine the [H+] or [OH−] for each of a solutions at 25°C.
Solution B: [H3O+] = 9.99 x 10^-9 M
Solution B: [OH-] = ?
Solution C: [H3O+] = 0.000777 M
Solution C: [OH-] = ?
Answer:
Solution B: [OH-] = 1×10^–6 M
Solution C: [OH-] = 1×10^–6 M
Explanation:
Solution B:
Hydronium ion concentration, [H3O+] = 9.99×10^–9 M
Hydroxide ion concentration, [OH-] = ?
The Hydroxide ion concentration, [OH-] can be obtained as follow:
[H3O+] × [OH-] = 1×10^–14
9.99×10^–9 × [OH-] = 1×10^–14
Divide both side by 9.99×10^–9
[OH-] = 1×10^–14 / 9.99×10^–9
[OH-] = 1×10^–6 M
Therefore, the Hydroxide ion concentration, [OH-] is 1×10^–6 M
Solution C:
Hydronium ion concentration, [H3O+] = 0.000777 M
Hydroxide ion concentration, [OH-] = ?
The Hydroxide ion concentration, [OH-] can be obtained as follow:
[H3O+] × [OH-] = 1×10^–14
0.000777 × [OH-] = 1×10^–14
Divide both side by 0.000777
[OH-] = 1×10^–14 / 0.000777
[OH-] = 1.29×10^–11 M
Therefore, the Hydroxide ion concentration, [OH-] is 1.29×10^–11 M
1. A 10.0 g sample of propane, C3H8, was combusted in a constant-volume bomb
calorimeter. The total heat capacity of the bomb calorimeter and water was 8.0
kJ/°C. The molar heat of combustion of propane is -2 222 KJ/mol. If the starting
temperature of the water was 20 °C, what will be the final temperature of the
bomb calorimeter?
Answer:
The final temperature of the bomb calorimeter is 82.98°C
Explanation:
The given information are;
The mass of the propane sample = 10.0 g
The heat capacity of the bomb calorimeter = 8.0 kJ/°C
The molar heat of combustion of propane is -2,222 kJ/mol.
The starting (initial) temperature of the water, T₁ = 20°C
The final temperature of the bomb calorimeter = T₂
The molar mas of propane = 44.1 g/mol
The number of moles, n, of propane present in 10.0 g of propane is found as follows;
[tex]Number \ of \ moles \ of \ propane, \ n = \dfrac{Mass \ of \ propane}{Molar mass \ of \ propane} = \dfrac{10}{44.1} = 0.227 \ moles[/tex]Which gives;
The heat, Δh, released from the combustion of 10.0 g of propane = 0.227 × -2222 kJ/mol
Δh = -503.85 kJ/mol
Heat gained by the calorimeter = Heat released from the combustion of 10.0 g of propane = 503.85 kJ/mol
Change in heat, Δh[tex]_c[/tex] in the calorimeter = Heat capacity × Temperature change
Δh[tex]_c[/tex] = m × C
503.85 kJ/mol = 8.0 kJ/°C × (T₂ - 20°C)
T₂ = -503.85 kJ/mol/(8.0 kJ/°C) + 20°C = 82.98°C
The final temperature of the bomb calorimeter = 82.98°C
How many Liters of 18 M H2SO4 are needed to make 0.5 L of 1.5 M H2SO4
Answer:
0.04 L
Explanation:
The following data were obtained from the question:
Concentration of stock solution (C1) = 18M
Volume of stock solution needed (V1) =?
Concentration of diluted solution (C2) = 1.5M
Volume of diluted solution (V2) = 0.5L
The volume of the stock solution needed can be obtain by using the dilution formula.
This is illustrated below:
C1V1 = C2V2
18 x V1 = 1.5 x 0.5
Divide both side by 18
V1 = (1.5 x 0.5)/18
V1 = 0.04L
Therefore, the volume of the stock solution needed is 0.04L.
When dissolved in water, an acid or a base breaks down into a proton and an electron. two negative ions. a positive and a negative ion. a positive ion and a proton.
Answer:
got c
Explanation:
When dissolved in water, an acid or a base breaks down into a positive and a negative ion.
What is an acid-base reactions?
An acid–base reaction is a chemical reaction that occurs between an acid and a base. Acid-base reactions can be used to determine pH.
When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge, whereas, bases, when dissolved in water yield hydroxide ions (OH-).
If a solution has a high concentration of H+ ions, then it is acidic whereas the solution having high concentration of OH- ions, called as basic.
Thus, from above , it is clear that when dissolved in water, an acid or a base breaks down into a positive and a negative ion.
Learn more about, acid-base reactions here; https://brainly.com/question/15833967
#SPJ6
(Blank) tells you that the exact momentum and position of a particle can't be known at the same time.
A. The Schrodinger equation
B. Quantum mechanics
C. The uncertainty principle
D. Particle-wave duality
Answer:
The uncertainty principle
Explanation:
Essentially if you measure the momentum of the particle at a given point, then when you go to measure the position it has moved, thus you don't know the position. Vise versa if you measure the position you only capture a still frame of the particle and no information about it's momentum, which will have changed.
Answer: the uncertainly principle
Explanation:
it basically states you can not know both at the same time
Find the 5 number summary for the number of chapters in the Old Testament. (Recall that the 5-number summary is the minimum, lower quartile, median, upper quartile, and maximum.)
Hey, I am doing this project right now too. Did you end up figuring out the answer to this? I do not understand this at all. Message me back pls!