Answers
Answer:
C
Explanation:
Boyle's law states that "the volume of a given mass of gas is inversely proportional to its pressure at constant temperature."
Inverse proportionality means that as one quantity is increasing, the other quantity is decreasing and vice versa.
Hence, as the pressure was increased, the volume decreases accordingly in obedience to Boyle's law.
Answer:
What is TRUE about the missing volume is option C.
C. The volume will decrease due to inverse relationship of V & P
Explanation:
The given parameters of the gas are;
The initial pressure of the gas, P₁ = 2 atm
The initial volume of the gas, V₁ = 1.5 L
The final pressure of the gas, P₂ = 2 atm
Boyle's law states that, at constant temperature, the volume, 'V', of a given mass is inversely proportional to its pressure, 'P';
Mathematically, Boyle's law can be expressed as follows;
P ∝ 1/V
From which we have;
P·V = Constant
∴ P₁·V₁ = P₂·V₂
For the given gas, we get;
2 atm × 1.5 L = 6 atm × V₂
∴ V₂ = 2 atm × 1.5 L/(6 atm) = 0.5 L
Therefore, the volume decreases from 1.5 L to 0.5 L.
Related Questions
Select the correct answer.
What data points do we combine to make the integrated rate law?
a) initial concentration and time
B) concentration at some later time, time, and rate constant
C) initial concentration, concentration at some later time, and time
D) initial concentration, concentration at some later time, time, and rate constant
Answers
Answer:
b???
Explanation:
Answer:
Pretty sure it A.
Explanation:
I just thought that cause what exactly does 'some later time' mean?
Which formula demonstrates a double replacement reaction?
1. A + B --> AB
2. AB + CD --> AC + BD
3. AB --> A + B
4. A + BC --> AC + B
Answers
Answer:
2
Explanation:
PLZ HELP!
Are water waves transverse or longitudinal? How do you know? IN YOUR OWN WORDS.
Answers
Explanation:
Transverse waves are always characterized by particle motion being perpendicular to wave motion. A longitudinal wave is a wave in which particles of the medium move in a direction parallel to the direction that the wave moves.
What are some ways your local environment would be affected if there was suddenly less water available?
I'll mark brainliest!
Answers
plant life dies
Explanation:
if all water disappears then plants would dry up and die, wich would impact the food chain
Most of the world’s energy comes from what three sources?
These energy sources are called ______________fuels and they are _____________________ resources.
Answers
Answers:
Most of the world’s energy comes from what three sources?
Oil, coal, and gas.
These energy sources are called fossil fuels and they are non-renewable resources.
Fuel type: oil
How it's formed: from the remains of ancient marine organisms
Its uses: transportation, industrial power, heating and lighting, lubricants, petrochemical industry, and use of by-products
Fule type: coal
How it's formed: when dead plant matter decays into peat and is converted into coal by the heat and pressure of deep burial
Its uses: electricity generation, metal production, cement production, chemical production, gasification, and other industrial uses
Fuel type: gas
How it's formed: decomposed organic matter mixed with mud, silt, and sand on the seafloor
Its uses: heating & cooling buildings, cooking foods, fueling vehicles, and electricity generation
Select what would most likely happen.
A. The plant population would increase; the fish population would increase.
B. The plant population would decrease; the fish population would increase.
C. The plant population would stay the same; the fish people would decrease.
D. The plant population would increase; the fish people would decrease.
Answers
What two properties of sound remain the same when sound quality differs? Check all that apply.
Answers
Answer: I don’t know sorry
Explanation:
A certain type of material allows electricity to flow through it, but it does not flow quickly or easily through it. Is the material a good or poor conductor? Does it have a low or high resistance?
Answers
Since such a material resists the flow of electric charge, the material can be said to have a high resistance (or high resistivity).
Mathematically, resistance and conductance are reciprocals of one another; a low conductance implies a high resistance, and a high conductance implies a low resistance.
How are the environment of a swamp in a rain forest similar
Answers
write any two equations to illustrate that hydrogen gas is a reducing agent
Answers
Examples:
•hydrogen reduces acetylene(OS= -1)to ethane(OS= -3).
C2H2+2H2--->C2H6.
•hydrogen reduces bromine(OS=0)to hydrobromic acid(OS=-1).
H2+Br2---->2HBr.
•hydrogen reduces oxygen(OS= 0 )To water (OS= -2).
2H2+O2---->2H2O.
What is the pH of a 1.0 x 10-2 M HNO3 solution?
Answers
=2.
Double-check my math tho
When an aqueous solution of silver nitrate is
mixed with an aqueous solution of potassium
chloride which are the spectator ions?
Answers
Answer:
[tex]K^{+}[/tex] and [tex]NO_{3}^{-}[/tex]
Explanation:
The equation for the reaction is AgNO3(aq) + KCl(aq) ==> AgCl(s) + KNO3(aq)
With all the ions, it is
[tex]Ag^{+}[/tex](aq) + [tex]NO_{3} ^{-}[/tex](aq) + [tex]K^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq) ==> AgCl(s) +
[tex]K^{+}[/tex] and [tex]NO_{3} ^{-}[/tex] do not change, so they are the spectator ions and are removed
The ionic equation is:
[tex]Ag^{+}[/tex](aq) + [tex]Cl^{-}[/tex](aq) ==> AgCl(s)
What is the percentage by mass of sulphur in Al2(SO4)3[A12SO4 =
342g/mol, S = 32]
Answers
Answer: The percentage by mass of sulphur in [tex]Al_2(SO_4)_3[/tex] is 9.36%
Explanation:
Mass percent of an element is the ratio of mass of that element by the total mass expressed in terms of percentage.
[tex]{\text {Mass percentage}}=\frac{\text {mass of sulphur}}{\text {Total mass}}\times 100\%[/tex]
Given: mass of sulphur = 32 g/mol
mass of [tex]Al_2(SO_4)_3[/tex] = 342 g/mol
Putting in the values we get:
[tex]{\text {Mass percentage}}=\frac{32g/mol}{342g/mol}\times 100\%=9.36\%[/tex]
The percentage by mass of sulphur in [tex]Al_2(SO_4)_3[/tex] is 9.36%
What type of reaction does this model represent?
1. single replacement
2. double replacement
3. Decomposition
4. double displacement
Answers
Answer:
1. single replacement
Explanation:
Single replacement can be represented by AB+C ⇄B+AC, which matches the picture
Double replacement and double displacement are the same kind of reaction and can be represented by AB+CD ⇄BD+AC
Decomposition reaction can be represented by AB ⇄A+B
What happens to an electromagnetic wave as the
frequency (how often a wave hits a crest) decreases?
energy decreases and the wavelength gets shorter
energy increases and the wavelength gets shorter
|
energy decreases and wavelength gets longer
energy increases and the wavelength gets longer
Answers
Answer:
Energy decreases and wavelength gets longer.
Explanation:
The energy of a wave is given by :
[tex]E=hf[/tex]
Where
h is Planck's constant
f is the frequency of the wave
As frequency decreases, the energy of the wave also decreases and wavelength gets longer. Hence, the option is (d).
Vinegar is added to baking soda and bubbles of carbon dioxide rapidly form. A cloudy liquid is left behind. What are products in this chemical reaction?
Answers
Answer:
When baking soda reacts with vinegar, one of the products produced is the gas carbon dioxide.
Answer:
The product left behind is carbon dioxide.
Complete the following statements of Dalton's atomic model: a) Elements are composed of minute, particles called atoms. b) Atoms of the same element are alike in and size. c) Atoms of different elements have different and sizes. d) Chemical are formed by the union of two or more different atoms of different elements. e) Atoms combine to form compounds in simple numerical , such as one to one, one to two, etc. f) Atoms of two may combine in different ratios to form more than one compound.
Answers
Answer:
a. Indivisible.
b. Mass.
c. Masses.
d. Compound.
e. Elements.
Explanation:
An atom can be defined as the smallest unit comprising of matter that forms all chemical elements. Thus, atoms are basically the building blocks of matters and as such defines the structure of a chemical element.
Generally, these atoms are typically made up of three distinct particles and these are protons, neutrons and electrons.
Hence, all the physical properties of a mineral result from the mineral's internal arrangement of atoms.
The following are statements postulated by the Dalton's atomic model;
a) Elements are composed of minute, indivisible particles called atoms.
b) Atoms of the same element are alike in mass and size.
c) Atoms of different elements have different masses and sizes.
d) Chemical compound are formed by the union of two or more different atoms of different elements.
e) Atoms combine to form compounds in simple numerical ratios, such as one to one, one to two, etc.
f) Atoms of two elements may combine in different ratios to form more than one compound.
a diagram of the electromagnetic spectrum is shown. which wavelength is the longest safest wavelengths for humans？ Helppp pleaseee
Answers
Answer:
radio waves
Explanation:
the answer is simple, radio waves. it is radio waves because when you look at the diagram the waves below Radio are very long. if you look at the waves under gamma ray, they are very short. radio is the longest wave while gamma is the shortest. if you are still confused it also says longer wavelength and low frequency( meaning it is safe) right under the wavelength.
PLSSSSSS ANSWERRRRR???
Answers
Answer:
( j ) should be the correct option because atomic number of fluorine is 9 so, no. of electrons and protons should be same I.e. 9
How are the sun and Earth's moon different? (2 points)
a
The sun is a ball of gases that revolves around Earth, while the moon is the center of the solar system.
b
The sun is a ball of rock and gas, while the moon is a ball of rock that revolves around the sun.
c
The sun is the center of the solar system, while the moon is a ball of rock that revolves around Earth.
d
The moon is the center of the solar system, while the sun is the center of the Milky Way.
Answers
What is the number of particles after gluecose is mixed with water
Answers
Answer: dissolves
Explanation:
When you stir a spoonful of sugar into a glass of water, you are forming a solution. This type of liquid solution is composed of a solid solute, which is the sugar, and a liquid solvent, which is the water. As the sugar molecules spread evenly throughout the water, the sugar dissolves.
determine the molar mass of water. WRITE THE UNITS
Answers
H2O = Water
Two hydrogen
One oxygen
I don’t know if your numbers are rounded but if you look at your periodic table, you will see a number close to 1.008 for hydrogen and a number close to 15.999 for oxygen. You can multiple the number for hydrogen twice and add 15.999. You should get a number close to 18.015 g/mol.
What is the molarity of an aqueous solution that contains 78g of C6H12O6 dissolved in 2500 mL of solution?
Answers
Answer:
[tex]\boxed {\boxed {\sf molarity = 0.17 \ M \ C_6H_12O_6}}[/tex]
Explanation:
Molarity is found by dividing the moles of solute by liters of solution.
[tex]molarity = \frac {moles}{liters}[/tex]
We are given grams of a compound and milliliters of solution, so we must make 2 conversions.
1. Gram to Moles
We must use the molar mass. First, use the Periodic Table to find the molar masses of the individual elements.
C: 12.011 g/mol H: 1.008 g/mol O: 15.999 g/molNext, look at the formula and note the subscripts. This tells us the number of atoms in 1 molecule. We multiply the molar mass of each element by its subscript.
6(12.011)+12(1.008)+6(15.999)=180.156 g/mol
Use this number as a ratio.
[tex]\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]
Multiply by the given number of grams.
[tex]78 \ g \ C_6H_12O_6 *\frac {180.156 \ g\ C_6H_12 O_6}{ 1 \ mol \ C_6H_12O_6}[/tex]
Flip the fraction and divide.
[tex]78 \ g \ C_6H_12O_6 *\frac { 1 \ mol \ C_6H_12O_6}{180.156 \ g\ C_6H_12 O_6}[/tex]
[tex]\frac { 78 \ mol \ C_6H_12O_6}{180.156 }= 0.432958102977 \ mol \ C_6H_12O_6[/tex]
2. Milliliters to Liters
There are 1000 milliliters in 1 liter.
[tex]\frac {1 \ L }{ 1000 \ mL}[/tex]
Multiply by 2500 mL.
[tex]2500 \ mL* \frac {1 \ L }{ 1000 \ mL}[/tex]
[tex]2500 * \frac {1 \ L }{ 1000 }= 2.5 \ L[/tex]
3. Calculate Molarity
Finally, divide the moles by the liters.
[tex]molarity = \frac {0.432958102977 \ mol \ C_6H_12O_6}{ 2.5 \ L}[/tex]
[tex]molarity = 0.173183241191 \ mol \ C_6H_12O_6/L[/tex]
The original measurement has 2 significant figures, so our answer must have the same. That is the hundredth place and the 3 tells us to leave the 7.
[tex]molarity \approx 0.17 \ mol \ C_6H_12O_6 /L[/tex]
1 mole per liter is also equal to 1 M.
[tex]molarity = 0.17 \ M \ C_6H_12O_6[/tex]
How many grams of water react to form 4.50 moles of Mg(OH)2?
MgO(s) + H20(1)
Mg(OH)2(s)
Answers
Answer: mass of water is 81.1 g
Explanation: from reaction eguation you see there are equal amounts of water and Mg(OH)2. Then amount of water is 4.50 mol. Molar mass of water is 18.016 g/mol.
Mass m= n·M= 4.50 mol· 18.016 g/mol = 81.1 g
The number of grams of water reacting to form a mass of water is 81.1 g.
What is mass?Mass is the quantity of matter in a physical body.
The given reaction is
MgO(s) + H₂O(1) → Mg(OH)₂(s)
The number of moles is equal in both sides
The moles of water is 4.50
The molar mass of water is 18.016 g/mol
mass × molar mass
4.50 × 18.016 = 81.1 g.
Thus, the number of grams of water reacting to make a mass of water is 81.1 g.
Learn more about mass
https://brainly.com/question/19694949
Explain how the copper could be in the lake sample near the picnic area but not have been detected by this test.
Answers
Answer:
May be the instrument is incorrect or may be error in it.
Explanation:
The copper have not been detected by this test because the test may be not for the detection of copper, may be it is used for identification of another minerals. If there is copper in the lake sample but can't be detected in the test so it means that the instrument which is used for detection is not the right one or having error in that instrument. Every mineral has a specific type of instrument that detect its presence, if we use incorrect instrument for the mineral then we can't detect the presence of that specific mineral.
Heart, veins, arteries, capillaries: Which organ system do these belong to?
O
Digestive
Musculoskeletal
Respiratory
Circulatory
Excretory
Answers
Answer:
Circulatory
Explanation:
The circulatory system consists of the heart, lungs, arteries, veins, coronary, and portal vessels.
maksud frasa integrasi nasional
Answers
Answer:
Adapun frasa INTEGRASI BANGSA atau INTEGRASI NASIONAL sendiri dimaknai dalam dua konteks yakni POLITIS dan ANTROPOLOGIS. Dalam konteks politis, Integrasi Nasional bermakna sebagai penyatuan berbagai macam kelompok sosial juga budaya ke dalam suatu kesatuan wilayah yang membentuk suatu identitas nasional.
Explanation:
A 0.5 kg arrow was shot at a target. The arrow accelerated at 200 m/s2. What was
the net force on the arrow to the nearest newton?
Record your answer and be sure to use the correct place value.
Answers
Answer: I think 100?
Explanation:
It’s asking for the net FORCE! And the formula to find force is to multiply the mass by the acceleration which would be in this case 0.5x200 which would be 100
The structural layers of the sun are shown in the cross-sectional diagram. An image of six concentric circles is shown. The six layers thus formed are of varying thickness. The layers in order from inside out are labeled, A, B, C, D, E, F. Which layer represents the radiative zone? A B C D (21 points plus brainliest!)
Answers
A layer represents the radiative zone which is at the centre of the cross-sectional diagram.
What is a radio active zone?The layer of a star that lies just outside the core, to which radiant energy is transferred from the core in the form of photons.
In the Sun, the region between the solar core at 0.2 of the Sun's radius and the outer convection zone at 0.71 of the Sun's radius is referred to as the radiation zone, although the core is also a radiative region.
Learn more about radio active zone here:
https://brainly.com/question/16239768
#SPJ1
B
A is inner core B is outer core and there is a few other layers but from what I know looking at this the second layer has always been the radioactive zone.
If you get this right I would love brainiest
how many moles are 2.54×10^29 molecules of H20
Answers
Answer:
Explanation: The number of atoms is an exact number, the number of mole is an exact number; they do not affect the number of significant figures. The average mass of one mole of H2O is 18.02 grams. This is stated: the molar mass of water is 18.02 g/mol.