Give the structure that corresponds to the following molecular formula and H1 NMR spectrum: The proton N M R shows a triplet at 0.9 p p m integrating to 11238 and a quartet at 1.4 integrating to 7473. THere is a singlet at 1.35 p p m integrating to 1275 that disappears after a D 2 O shake. The unknown compound has a molecular formula of C 7 H 16 O. The magenta numbers in the spectrum are the relative integrals in arbitrary units. Draw the structure.

Answer:

The end products cannot be changed back in their original forms

Explanation:

Answer:

the first one

Explanation:

Answer:

In advance

middle

lower

Explanation:

These are the safety precautions needed when carrying out duties in the fume hood.

When planning and preparing to work in a fume hood (a locally designed area to reduce exposure to hazardous fumes). It is advisable to make all equipment readily available at your disposal in advance to reduce and minimize the raising and lowering of the hood sash at intervals.

It is also pertinent to understand that working in the middle of the work surface helps to promote the movement of air and keeps the area neat and tidy.

However, if any case where there is a need to get a new tool or equipment during the process of working in a fume hood, it is advisable to lower the sash at that point in time.

Answer:

Their must be a picture with this question so we can answer it

Explanation:

According to octet rule  the bonded valence shells are completely filled. All the compounds except the first one, CH₃CH₃O is invalid since H does not obey the rule and invalid.

Octet rule says that an atoms become stable when it completes its valence shell to 8 electrons or 2 electrons for K-shell. Thus bonded shells have to completely filled to be stable.

Each atom shares its electrons based on its valency. For example carbon have a valency of 4 and it forms for bonds and oxygen and sulfur have two and hydrogen forms only one bonds.

In the first compounds CH₃CH₃O, where one H forms two bonds which is not possible and invalid.

In the second compound CONH, all the atoms satisfies its valency including nitrogen having a valency of three forms  three bonds. Similarly in CH₂F₂, one fluorine forms one bond and the structure is valid.

In the case of Br₂ , each bromine shares one electron with the other and complete their octet to eight electrons. In NH₃, SCO and COCl₂ all the atoms satisfies their valency and the structures are valid.

Therefore the only invalid structure is first compound, remaining all are valid.

To find more about octet rule, refer the link below:

https://brainly.com/question/11657564

#SPJ2

Your question is incomplete. But most probably your complete question was as in the uploaded image.

1s22s22p63s1. That's the ans

Answer:

yes

Explanation:

yes

Answer:

there are 7 total oxygen (O) atoms are present in in the reactants side of the equation

Answer:

It would be 151.832775 because one mole is 44.0095*3.45 i hope this helps!

Explanation:

Answer:

thermal conductors

steel

polystyrene

thermal insulator

between things of the same temp?

sorry to ask but if its ok with you, may i get brainly, i need to rank up all i need is two more, if not its fine. thank you and yours truly golden

Answer:

1.17 M

Explanation:

Step 1: Write the balanced equation

N₂ + 3 H₂ ⇒ 2 NH₃

Step 2: Calculate the rate of disappearance of H₂

We will use the following expression.

rH₂ = - Δ[H₂]/t = - (0.25 M - 0.50 M)/44 s = 0.0057 M/s

Step 3: Calculate the rate of disappearance of N₂

The molar ratio of N₂ to H₂ is 1:3.

0.0057 mol H₂/L.s × 1 mol N₂/3 mol H₂ = 0.0019 mol N₂/L.s

Step 4: Calculate the final concentration of N₂

We will use the following expression.

[N₂] = [N₂]₀ - rN₂ × t

[N₂] = 1.25 mol/L - 0.0019 mol/L.s × 44 s

[N₂] = 1.17 M

Answer/Explanation:

This electrical energy now travels through the phone supplying the phone with electricity. Batteries in a cell phone supply chemical energy to electric charges. The electric charges use the energy to be put into motion.

Answer:

The answer is "A"

Explanation:

Please find the complete question in the attachment file.

[tex]\to R(s)= \frac{As}{K+s}[/tex]

when the s in the approach, that is infinity R(s) tends

[tex]\to \frac{A}{\frac{K}{s}+1} \\\\ \to\frac{A}{0+1} \\\\ \to\frac{A}{1} \\\\ \to A[/tex]

Answer:

257 mL

Explanation:

Step 1: Given data

Step 2: Calculate the moles (n) corresponding to 32.8 g of HCl

The molar mass of HCl is 36.46 g/mol.

32.8 g × 1 mol/36.46 g = 0.900 mol

Step 3: Calculate the volume (V) of solution required

We will use the following expression.

C = n/V

V = n/C

V = 0.900 mol/(3.50 mol/L)

V = 0.257 L = 257 mL

Answer:

The cycling of matter is important to many Earth processes and to the survival of organisms the existing matter must cycle continuously for this planet to support life Water, carbon, nitrogen, phosphorus, and even rocks move through cycles If these materials did not cycle, Earth could not support life.

Explanation:

Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

Rocks, as well as water, carbon, nitrogen, and phosphorus, go through cycles. The planet Earth could not support life if these materials did not cycle.

Subsystems exist within the Earth system. These subsystems include the exosphere, atmosphere, hydrosphere, lithosphere and geosphere, also referred to as the lithosphere, and the living environment (biosphere).

These systems are powered by energy that comes from both the Sun and the interior of the Earth. Through processes known as biogeochemical cycles, nutrients and elements also move through these systems along with energy.

Therefore,  Earth activities depend on matter cycling, and for organisms to survive, this planet's surface must cycle with the flow of matter.

To learn more about Earth, refer to the link:

https://brainly.com/question/1204146

#SPJ6

Answer: The density of this nugget is [tex]7\text{ g cm}^{-3}[/tex] .

Explanation:

We are given that,

Mass of nugget = 63 g

Volume = [tex]9\ cm^3[/tex]

The computation of density of a substance is given by :-

[tex]\text{Density}=\dfrac{\text{Mass}}{\text{Volume}}\\\\\Rightarrow\ \text{Density}=\dfrac{63}{9}\text{ g cm}^{-3}[/tex]

[tex]\Rightarrow\ \text{Density =}7\text{ g cm}^{-3}[/tex]

Therefore, the density of this nugget is [tex]7\text{ g cm}^{-3}[/tex] .

Answer:yes anything can be addictive

Explanation:

Answer:

While caffeine produces a small rise in dopamine, it does not cause the large surge that unbalances the reward circuits in the brain and is necessary for an addiction. So even though the word “addiction” is often used casually, caffeine is not addictive (scientifically speaking).

Answer: Energy of reactants = 30, Energy of products = 10

Exothermic

Activation energy for forward reaction is 10.

Explanation:

Exothermic reactions are defined as the reactions in which energy of the product is lesser than the energy of the reactants. The total energy is released in the form of heat and [tex]\Delta H[/tex] for the reaction comes out to be negative.

Energy of reactants = 30

Energy of products = 10

Thus as energy of the product < energy of the reactant, the reaction is exothermic.

Activation energy [tex](E_a)[/tex] is the extra energy that must be supplied to reactants in order to cross the energy barrier and thus convert to products.

[tex]E_a[/tex] for forward reaction is (40-30) = 10.

Answer:

O Each orbit has a specific energy level.

Explanation:

Neils Bohr put forward his own model of the atom based on the quantum mechanics originally developed by Planck.

He assumed the Rutherford's model and suggested that the extranuclear part consists of electrons in specific spherical orbits around the nucleus.

The orbits/energy level are the permissible through which the electrons can move through.

His concept is based the concept that the electron can move round the nucleus in certain permissible orbitss

Answer:

The property P measured, was a chemical property of X; its acidity

The property D measured, was a physical property of X; its density

The property V measured, was a physical property of X; it's viscosity probably.

Explanation:

1. The property V that was measured is the acidity of X. The acidity of X is a measure of the concentration of hydrogen ions present in it. When drops of another solution, containing dissolved sodium hydroxide, are slowly added, and a pH indicator is used to determine when the sodium hydroxide has completely reacted with X, the procedure determines the concentration of X that would neutralize the base, sodium hydroxide.

2. The property of X determined in the step is the density of X, a physical property. First the volume of X was determined by the displacement method. Then the density of X is calculated from its mass and volume.

3. Since during the determination of the property V, there was no alteration done to the chemical constitution of X, the property thus determined is a physical property. Melting of the sample is a physical change and likewise its flow rate through a very thin tube.

Answer:

C) tellurium (Te) is the correct answer.

Test tubes heat small amounts of liquids while boiling tube boils liquids

The question is incomplete, the complete question is found in the image attached.

Answer:

1- acceptor

2-donor

3-acceptor

4-donor

Explanation:

A hydrogen bond acceptor is a molecule that has an electronegative atom having a lone pair of electrons that participates in the hydrogen bond.

A hydrogen bond donor is the molecule that supplies the hydrogen atom of a hydrogen bond.

If we look at structure I-IV in the image attached, I and III are hydrogen bond acceptors because they all possess electronegative atoms having lone pairs of electrons but do not have hydrgen atoms bonded to highly electronegative atoms.

Similarly, structures II and IV are hydrogen bond donors. The C=C double bond is electron withdrawing and highly electronegative making the hydrogen atoms attached to it acidic and hydrogen bond donors. Also, nitrogen is an electronegative atom thereby making structure IV a hydrogen bond donor.

Answer:

False

Explanation:

Chemists make a distinction between two different types of changes that they study—physical changes and chemical changes. Physical changes are changes that do not alter the identity of a substance. Chemical changes are frequently harder to reverse than physical changes.

Answer:

The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.

Explanation:

Answer and Explanation:

Yes. The determination of melting point is used to analyze if a solid compound is pure or impure. The melting point of a pure solid product does not vary in a narrow range, whereas if impurities are present the solid melts in a broad range of temperatures. For this reason, this technique is generally used to determine the identity and purity of the products obtained in chemical reactions.

Answer: B. triH sol Mgl2= -triHlat+ triHhydr Mg^2+ 2triHhydr^l-

Explanation:

Just did it and it was right

Answer:

Yes, in both cases the reactant bond must be broken before the H can bond.

Explanation:

Let us remind ourselves of the basics of the collision theory. According to this theory, chemical reaction occurs because of the collision of particles of substances in a chemical reaction system.

This means that the bond between reactants must first be broken and new bonds formed in products. Activation energy is the minimum energy required for a reaction to occur. This energy goes into the rearrangement of reactant bonds to enable them to recombine and form products.

Since the N2 bond energy is far higher than the I2 bond energy, a greater degree of energy is needed overcome the energy barrier in the reaction of H2 with N2 compared to the reaction of H2 and I2 . Therefore, the activation energy for the reaction of H2 and N2 is much higher than the activation energy for the reaction of H2 with I2.

Answer:

evolution

Explanation:

Answer:

because bird species are reproduced sexually

so there would be some variations in every generation.

that's why birds could be different from their ancestors.

Answer:

The sun will appear to rise and set more slowly

have a nice day! (^o^)