Give the charge on the transition metal of each of the following compounds:

A. Au2SO4
B. Fe2(CrO4)3
C. Zn(OH)2


Enter your answer as +1, +2, etc.

Au
type your answer...

Fe
type your answer...

Zn
type your answer...

Answer:

The correct answer is "inferior".

Explanation:

In anatomy, the term inferior is used to describe parts of the body that are below other part used as reference. Inferior comes from the Latin "inferus" that means "below". In this case, the mouth will always be inferior to the nose, it doesn't matter if the boy was standing on his head or if he is in other position.

Answer:

correct answer, inferior.

Explanation:

of little or less importance, value, or merit always felt inferior to his older brother. 2a : of low or lower degree or rank. b : of poor quality : mediocre. 3 : situated lower down : lower.

If one person is regarded as inferior to another, they are regarded as less important because they have less status or ability. He preferred the company of those who were intellectually inferior to himself.

Hope this helped!

Answer:Features very high tensile strength and toughness. Titanium alloys are light in weight, have superior corrosion resistance properties and can withstand extreme temperatures. ... Titanium alloys are heat-treated to increase their strength in terms of fracture toughness, fatigue strength and high temperature strength.35 grams is the sollubility.

Explanation:

Explanation:

1s2 2s2 2p6 3s2 3p4

Oxidation number refers to the number of electrons that an atom gains or loses as it forms a chemical bond with another element.

From the electronic configuration above, it is expected that sulphur has oxidation number of 2. This is because the p orbital can hold a maximum of 6 electrons. However, in the electronic configuration it is just holding 4. To complete it, it needs to gain 2 more electrons.

Answer:

+4, +6, –2

Explanation:

Answer:

a. The balanced chemical equation is written below and this is a type of double displacement reaction.

Explanation:

When barium chloride reacts with copper sulfate, a white precipitate of barium sulfate is observed.

The chemical equation for the reaction of barium chloride and copper sulfate follows:

b.

2FeSO4--(heat)---> Fe2O3 + SO2+ SO3

This Reaction is an example of Thermal Decomposition Reaction.

Answer:

The total amount of Au is $ [tex]2.0\times10^{24}[/tex]

Explanation:

Given that,

Mass of 1.0 ml of Au [tex]m=4\times10^{-2}\ g[/tex]

Total volume of water in oceans [tex]V=1.5\times10^{21}\ L[/tex]

We need to calculate the volume in ml

Using given volume

[tex]V=1.5\times10^{21}\times1000\ mL[/tex]

[tex]V=1.5\times10^{24}\ mL[/tex]

We need to calculate the total mass of Au  

Using given data

[tex]1\ ml\ volume = 4\times10^{-2}\ g[/tex]

[tex]1.5\times10^{24}\ ml=4\times10^{-2}\times1.5\times10^{24}[/tex]

So, The total mass of Au is [tex]6\times10^{22}\ g[/tex]

The mass will be in ounce,

[tex]Mass=0.035274\times6\times10^{22}[/tex]

[tex]Mass=2.12\times10^{21}\ ounce[/tex]

The total amount of the Au Will be

[tex]Total\ amount=2.12\times10^{21}\times948[/tex]

[tex]Total\ amount=2.0\times10^{24}[/tex]

Hence, The total amount of Au is $ [tex]2.0\times10^{24}[/tex]

Answer:

57.54% is the percentage of gold by mass in the alloy.

Explanation:

The mass of the mixture is 9.35g. That is:

9.35g = Mass Gold + Mass Silver

Mass silver = 9.35g - Mass gold (1)

Now, the volume of the jewelry is the sum of volumes of gold and silver:

0.654cm³ = Mass Gold / 19.5g/cm³ + Mass silver / 10.5g/cm³ (2)

Volume = Mass / Density.

Replacing (1) in (2):

0.654cm³ = Mass Gold / 19.5g/cm³ + (9.35g - Mass gold) / 10.5g/cm³

0.654 = 0.051282 Mass Gold + 0.890476 - 0.095238 Mass gold

-0.236476 = -0.043956 Mass gold

Mass gold = 5.38g

And mass percent of gold in the alloy is:

5.38g / 9.35g * 100 =

Answer:All are chemical compounds.

Answer:

its a tree becoz charcoal came from wood

Answer:

Yes, it is standard for each element. You can calculate it from the formula: n=A-Z, where n is the number of neutrons, A is the atomic mass and Z is the atomic number.

We have that The isotope of copper with the atomic mass of the isotope copper 62.930 amu is Cu 63

From the question we are told

the atomic mass of the isotope copper-__ is 62.930 amu

Generally

Copper is the 29th element of the the periodic table with an atomic mass of 29.

Copper as an elementt has 2 stable isotopes which are

Cu 63

Cu 65

Therefore

The isotope of copper with the atomic mass of the isotope copper 62.930 amu is Cu 63

For more information on this visit

https://brainly.com/question/17756498

Answer:

It depends on what kind of pasta it is

Answer:

heeeee pues hola no se chao

Answer:

B. salt

-

I know that you answered this question like a month ago, but im going to answer anyway for the people who is having a hard time answering this :D

Answer:

n = 1.3 x 10¹⁸ photons

Explanation:

First we need to calculate the amount of energy released in given time:

E = Pt

where,

E = Energy  = ?

P = Power = 4 mW = 0.004 W

t = time = 115 s

Therefore,

E = (0.004 W)(115 s)

E = 0.46 J

Now, this energy can be given in forms of photons as:

E = nhc/λ

where,

n = No. of photons = ?

h = Plank's Constant = 6.626 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength of light = 5650 x 10⁻¹⁰ m

Therefore,

0.46 J = n(6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(5650 x 10⁻¹⁰ m)

n = (0.46 J)/(3.5 x 10⁻¹⁹ J)

n = 1.3 x 10¹⁸ photons

Answer:

1.308 x 10¹⁸ photons were emitted from the laser pointer.

Explanation:

Given;

wavelength of the photon, λ = 5650  Å = 5650 x 10⁻¹⁰ m

power emitted by the source, P = 4 mW = 4 x 10⁻³ W

time of photon emission, t = 115 s

The energy of a single photon is given by;

E = hf

f = c / λ

[tex]E = \frac{h c }{\lambda}[/tex]

where;

c is speed of light = 3 x 10⁸ m/s

h is Planck's constant = 6.626 x 10⁻³⁴ Js

[tex]E = \frac{(6.626 *10^{-34}) (3*10^8) }{5650*10^{-10}}\\\\ E = 3.518*10^{-19} \ J[/tex]

Energy of the source (laser pointer) = P x t

                                                           = (4 x 10⁻³ W) (115 s )

                                                           = 0.46 J

If no energy is lost, then emitted energy by the source must be equal to total energy of then photons;

[tex]E_T = n E_{photon}\\\\n = \frac{E_T}{E_{photon}}\\\\n = \frac{0.46}{3.518*10^{-19}}\\\\n = 1.308*10^{18} \ photons[/tex]

Therefore, 1.308 x 10¹⁸ photons were emitted from the laser pointer.

Lead 214 emits then beta electrons to transform into bismuth 214 and polonium 214, which produces lead 210 through the emission of a third alpha particle. This series of transformations take place in a time span roughly equal to an hour.

Hope this helps, if I am right, brainliest? :))))

Answer:

Division by zero is undefined because there is no other number to divide it by.

Explanation:

Unlike 2/2, 2/0 doesn't have anything to divide the 2 by which makes it undefined and impossible to solve.

The division by zero is undefined​, because whatever response we may give, we will then have to concur that the answer times 0 = 1, which is illogical because anything multiplied by zero is zero.

Since any attempt at definition results in a contradiction, the outcome of a division by zero cannot be defined. a=r*b. r*0=a. (1) (1) But because r*0=0 for all r, there is no solution to the equation unless a=0 (1).

Again, mathematicians have left zero divided by zero as an open problem because they are both equally valid and, to be honest, neither of them is consistent with the rest of mathematics.

Mathematically, it is impossible to divide a number by zero, just as in this illustration. Or, at the very least, there isn't currently a means to do that. Numerous attempts have been made to figure out how to divide by zero, as mathematicians are constantly looking for solutions to intriguing mathematical issues.

Thus, The division by zero is undefined​, because whatever response we may give, we will then have to concur that the answer times 0 = 1.

To learn more about division by zero is undefined, follow the link;

https://brainly.com/question/11523699

#SPJ2

Answer:

bonded

Explanation:

Compounds are two elements bonded together.

A mixture is multiple substances blended together.  The substances aren't bonded together and can easily be extracted  from each other.

Answer:

[tex]\boxed {\tt 2.71169355 \ mL}[/tex]

Explanation:

Density can be found using the following formula:

[tex]d=\frac {m}{v}[/tex]

Rearrange the formula for v. Multiply both sides by v, then divide both sides by d.

[tex]d*v =\frac {m}{v}*v[/tex]

[tex]d*v=m[/tex]

[tex]\frac{d*v}{d}=\frac{m}{d}[/tex]

[tex]v=\frac{m}{d}[/tex]

The volume can be found by dividing the mass by the density. The mass is 2.69 grams and the density is 0.992 grams per milliliter.

[tex]m= 2.69 \ g\\d= 0.992 \ g/mL[/tex]

Substitute the values into the formula.

[tex]v=\frac{2.69 \ g}{0.992 \ g/mL}[/tex]

Divide. Note that the grams, or g, will cancel each other out.

[tex]v=\frac{2.69}{0.992 \ mL}[/tex]

[tex]v= 2.71169355 \ mL[/tex]

The volume of the water is 2.71169355 milliliters.

Answer:

boiling point

kr,5s2,4d2

Explanation:

as itis in the 2nd transition series

Answer:

Pressure will stay the same if volume stays the same.

Answer:

Volume is inversely proportional to pressure, meaning if one goes up the other goes down and vise-versa. With volume remaining the same and there are no other given factors, pressure also remains the same

Answer:

Ionic bonds ussally form with a metal, and a non metel elements, so the answer would most likley be B.

Explanation:

hope I could help

Answer:

Yes, it is possible to produce a blood type AB from blood type A and B.

Explanation:

If we were to do a hybrid cross and the mother's blood type was A, then her genotypes would be AA and AO. Additionally, if the father had type B blood, his genotypes would be BB and BO. From this, we can tell that the child's genotypes would have to be A, AB, B, O. Since AB is one of the choices, yes, it is possible to produce a blood type AB from blood type A and B.

The only times where you won't be able to produce a child with type AB is if both of the parents have type B blood and type O blood. Or if one parent has type B blood and the another has type O blood. Or if one parent has type AB and the other one has O blood. Or if both parents have type A blood.

Answer:

No. of protons = 34

Explanation:

First we need to calculate the number of electrons in one mole of the the element:

No. of electrons per mole = Total Mass of Electrons/Mass of 1 Electron

No. of electrons per mole = (18.65 x 10⁻³ g)/(9.109 x 10⁻²⁸ g)

No. of electrons per mole = 2.04 x 10²⁵ electrons/mol

Now, we calculate the no. of electrons in 1 atom:

No. of electrons per atom = No. of Electrons per mole/No. of atoms per mole

No. of electrons per atom = (2.04 x 10²⁵ electrons/mol)/(6.022 x 10²³ atoms/mol)

No. of electrons per atom = 34 electrons/atom

Since, the no. of protons in a pure element are equal to the number of electrons. Therefore,

No. of protons = 34

In this exercise we have to use the knowledge of atoms to calculate the number of protons, in this way we find:

Protons will be  34

First we need to reckon the number of electrons fashionable individual blemish of the the place where one feels comfortable:

[tex]electrons \ per \ mole = Total\ Mass\ of \ Electrons/Mass\ of\ 1 \ Electron\\ electrons\ per\ mole = (18.65 * 10^{-3} g)/(9.109 * 10^{28} g)\\ electrons \ per \ mole = 2.04 x 10^{25} electrons/mol[/tex]

Now, we plan on the electrons in 1 smallest part of something:

[tex]electrons\ per\ atom = Electrons\ per\ mole/atoms\ per\ mole\\ electrons\ per\ atom = (2.04 * 10^{25} electrons/mol)/(6.022 * 10^{23} atoms/mol)\\ electrons\ per\ atom = 34 electrons/atom [/tex]

See more about atoms at brainly.com/question/13981855

Answer:

Titration is used to determine the concentration of unknown solutions.

A dipole moments is a measurement of the separation of two opposite electrical charges

Answer:

The answer is

Explanation:

The mass of a substance when given the density and volume can be found by using the formula

From the question

density = 10 g/ml

volume = 80 ml

The mass of the substance is

mass = 10 × 80

We have the final answer as

Hope this helps you

Answer:

helium i think

Explanation:

Answer:

The answer is 1.61 × 10²³ atoms

Explanation:

To determine number of atoms, we will use the formula below

Number of atoms = number of moles (n) × avogadro's constant (6.02 x 10²³)

n was not provided, hence we will solve for n

n = mass/ molar mass

molar mass of carbon monoxide, CO (where C is 12 and O is 16) is 12 + 16 = 28

mass was provided in the question as 7.48

n = 7.48/28

n = 0.267

Hence,

number of atoms = 0.267 × 6.02 x 10²³

= 1.61 × 10²³ atoms

Answer:

c

Explanation:

From the equation, we can say that we need thrice the number of hydrogen than that of nitrogen

we are given 3 moles of nitrogen and 11 moles of hydrogen

but thrice the number of moles of nitrogen is 9, hence we have hydrogen in excess or Hydrogen is the excess reagent

Since we had 11 moles of Hydrogen and we only needed 9, 2 moles of hydrogen are left over

From the equation, we can see that the moles of ammonia formed will be twice the moles of nitrogen

Since 3 moles of nitrogen are used, the reaction will give us 6 moles of Ammonia and NOT 12 moles, therefore c is the correct answer

Since we have hydrogen in excess, our reaction is being limited because we have less Nitrogen, Hence Nitrogen is the Limiting Reagent

Option C is the only false statement

The false statement is that "12.0 moles of ammonia are produced"

According to the equation of reaction:

N₂  +  3H₂  >>>>>  2NH₃

1  mole of N₂ reacts with 3 moles of H₂

3 moles of N₂ will react with 9 moles of H₂

Since 3 moles of N₂ is said to react with 11 moles of H₂ (instead of 9 moles of H₂), H₂ is in excess by 2 moles. That is, N₂ is the limiting reactant.

Since N₂ is the limiting reactant:

1 mole of  N₂ produces 2 moles of NH₃

3 moles of N₂ will produce 6 moles of NH₃

Therefore, we can conclude that:

Learn more here: https://brainly.com/question/19555927